summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRich Felker <dalias@libc.org>2016-04-03 05:12:45 +0000
committerRich Felker <dalias@libc.org>2016-04-28 20:48:14 +0000
commit566d9b2384275064d5049570c048ed6f02bf17a1 (patch)
treefe092fc3bbbf373fcedccb51ecdd764f77bf45d0
parent2a99114ee07dbedc6b686c0cdb9dc8542a2955fc (diff)
downloadlinux-sh-566d9b2384275064d5049570c048ed6f02bf17a1.tar.gz
spi: add driver for J-Core SPI controller
Signed-off-by: Rich Felker <dalias@libc.org>
-rw-r--r--drivers/spi/Kconfig4
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-jcore.c266
3 files changed, 271 insertions, 0 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9d8c84bb1544..5bd2ccfb1a30 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -285,6 +285,10 @@ config SPI_IMX
This enables using the Freescale i.MX SPI controllers in master
mode.
+config SPI_JCORE
+ tristate "J-Core SPI Master"
+ depends on OF
+
config SPI_LM70_LLP
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
depends on PARPORT
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index fbb255c5a608..6a34124ef1b2 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o
obj-$(CONFIG_SPI_IMX) += spi-imx.o
+obj-$(CONFIG_SPI_JCORE) += spi-jcore.o
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o
diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c
new file mode 100644
index 000000000000..552304c481e9
--- /dev/null
+++ b/drivers/spi/spi-jcore.c
@@ -0,0 +1,266 @@
+/*
+ * J-Core SPI controller driver
+ *
+ * Copyright (C) 2012-2016 SEI Inc.
+ *
+ * Current version by Rich Felker
+ * Based loosely on initial version by Oleksandr G Zhadan
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+
+#define USE_MESSAGE_MODE 1
+
+#define DRV_NAME "jcore_spi"
+
+#define MAX_SPI_SPEED 12500000 /* 12.5 MHz */
+
+#define CTRL_REG 0x0
+#define DATA_REG 0x4
+
+#define SPI_NOCHIP_CS 0
+#define SPI_FLASH_CS 1
+#define SPI_CONF_CS 2
+#define SPI_SD_CS 2
+#define SPI_CODEC_CS 3
+
+#define JCORE_SPI_CTRL_ACS 0x01
+#define JCORE_SPI_CTRL_XMIT 0x02
+#define JCORE_SPI_STAT_BUSY 0x02
+#define JCORE_SPI_CTRL_CCS 0x04
+#define JCORE_SPI_CTRL_LOOP 0x08
+#define JCORE_SPI_CTRL_DCS 0x10
+
+#define JCORE_SPI_WAIT_RDY_MAX_LOOP 2000000 /* in usec */
+
+struct jcore_spi {
+ struct spi_master *master;
+ void __iomem *base;
+ volatile unsigned int ctrlReg;
+ unsigned int csReg;
+ unsigned int speedReg;
+ unsigned int speed_hz;
+};
+
+static void jcore_spi_wait_till_ready(struct jcore_spi *hw, int timeout)
+{
+ while (timeout--) {
+ hw->ctrlReg = readl(hw->base + CTRL_REG);
+ if (!(hw->ctrlReg & JCORE_SPI_STAT_BUSY))
+ return;
+ cpu_relax();
+ }
+ pr_err("%s: Timeout..\n", __func__);
+}
+
+static void jcore_spi_program(struct jcore_spi *hw)
+{
+ jcore_spi_wait_till_ready(hw, JCORE_SPI_WAIT_RDY_MAX_LOOP);
+ writel(hw->csReg | hw->speedReg, hw->base + CTRL_REG);
+}
+
+static void jcore_spi_chipsel(struct spi_device *spi, bool value)
+{
+ struct jcore_spi *hw = spi_master_get_devdata(spi->master);
+
+ pr_debug("%s: CS=%d\n", __func__, value);
+
+ hw->csReg = ( JCORE_SPI_CTRL_ACS | JCORE_SPI_CTRL_CCS | JCORE_SPI_CTRL_DCS )
+ ^ (!value << 2*spi->chip_select);
+
+ jcore_spi_program(hw);
+}
+
+static void jcore_spi_baudrate(struct jcore_spi *hw, int speed)
+{
+ if (speed == hw->speed_hz) return;
+ hw->speed_hz = speed;
+ hw->speedReg = ((MAX_SPI_SPEED / speed) - 1) << 27;
+ jcore_spi_program(hw);
+ pr_debug("%s: speed=%d pre=0x%x\n", __func__, speed, hw->speedReg);
+}
+
+static int jcore_spi_txrx(struct spi_master *master, struct spi_device *spi, struct spi_transfer *t)
+{
+ struct jcore_spi *hw = spi_master_get_devdata(master);
+
+ void *ctrl_reg = hw->base + CTRL_REG;
+ void *data_reg = hw->base + DATA_REG;
+ int timeout;
+ int xmit;
+ int status;
+
+ /* data buffers */
+ const unsigned char *tx;
+ unsigned char *rx;
+ int len;
+ int count;
+
+ jcore_spi_baudrate(hw, t->speed_hz);
+
+ xmit = hw->csReg | hw->speedReg | JCORE_SPI_CTRL_XMIT;
+ tx = t->tx_buf;
+ rx = t->rx_buf;
+ len = t->len;
+
+ for (count = 0; count < len; count++) {
+ timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP;
+ do status = readl(ctrl_reg);
+ while ((status & JCORE_SPI_STAT_BUSY) && --timeout);
+ if (!timeout) break;
+
+ writel(tx ? *tx++ : 0, data_reg);
+ writel(xmit, ctrl_reg);
+
+ timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP;
+ do status = readl(ctrl_reg);
+ while ((status & JCORE_SPI_STAT_BUSY) && --timeout);
+ if (!timeout) break;
+
+ if (rx) *rx++ = readl(data_reg);
+ }
+
+#if !USE_MESSAGE_MODE
+ spi_finalize_current_transfer(master);
+#endif
+
+ return count<len ? -EREMOTEIO : 0;
+}
+
+#if USE_MESSAGE_MODE
+static int jcore_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct spi_device *spi = msg->spi;
+ struct spi_transfer *xfer;
+ bool keep_cs = false;
+ int ret = 0;
+
+ jcore_spi_chipsel(spi, false);
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ ret = jcore_spi_txrx(master, spi, xfer);
+ if (ret) break;
+ if (xfer->delay_usecs)
+ udelay(xfer->delay_usecs);
+ if (xfer->cs_change) {
+ if (list_is_last(&xfer->transfer_list,
+ &msg->transfers)) {
+ keep_cs = true;
+ } else {
+ jcore_spi_chipsel(spi, true);
+ udelay(10);
+ jcore_spi_chipsel(spi, false);
+ }
+ }
+ msg->actual_length += xfer->len;
+ }
+
+ if (!keep_cs)
+ jcore_spi_chipsel(spi, true);
+
+ msg->status = ret;
+
+ spi_finalize_current_message(master);
+
+ return ret;
+}
+#endif
+
+static int jcore_spi_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct jcore_spi *hw;
+ struct spi_master *master;
+ struct resource *res;
+ int err = -ENODEV;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct jcore_spi));
+ if (!master)
+ return err;
+
+ /* setup the master state. */
+ master->num_chipselect = 3;
+ master->mode_bits = SPI_MODE_3;
+#if USE_MESSAGE_MODE
+ master->transfer_one_message = jcore_spi_transfer_one_message;
+#else
+ master->transfer_one = jcore_spi_txrx;
+#endif
+ master->set_cs = jcore_spi_chipsel;
+ master->dev.of_node = node;
+
+ hw = spi_master_get_devdata(master);
+ hw->master = master;
+ platform_set_drvdata(pdev, hw);
+
+ /* find and map our resources */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ goto exit_busy;
+ if (!devm_request_mem_region
+ (&pdev->dev, res->start, resource_size(res), pdev->name))
+ goto exit_busy;
+ hw->base =
+ devm_ioremap_nocache(&pdev->dev, res->start, resource_size(res));
+ if (!hw->base)
+ goto exit_busy;
+
+ jcore_spi_baudrate(hw, 400000);
+
+ pdev->dev.dma_mask = 0;
+ /* register our spi controller */
+ err = spi_register_master(master);
+ if (err)
+ goto exit;
+ dev_info(&pdev->dev, "base %p, noirq\n", hw->base);
+
+ return 0;
+
+exit_busy:
+ err = -EBUSY;
+exit:
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(master);
+ return err;
+}
+
+static int jcore_spi_remove(struct platform_device *dev)
+{
+ struct jcore_spi *hw = platform_get_drvdata(dev);
+ struct spi_master *master = hw->master;
+
+ platform_set_drvdata(dev, NULL);
+ spi_master_put(master);
+ return 0;
+}
+
+static const struct of_device_id jcore_spi_of_match[] = {
+ { .compatible = "jcore,spi2" },
+ {},
+};
+
+static struct platform_driver jcore_spi_driver = {
+ .probe = jcore_spi_probe,
+ .remove = jcore_spi_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = NULL,
+ .of_match_table = jcore_spi_of_match,
+ },
+};
+
+module_platform_driver(jcore_spi_driver);
+
+MODULE_DESCRIPTION("J-Core SPI driver");
+MODULE_AUTHOR("Rich Felker <dalias@libc.org>");
+MODULE_ALIAS("platform:" DRV_NAME);