summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2018-04-12uio: allow use on nommu systemsdevelopmentRich Felker-1/+0
mmap of uio devices does not seem to work without further nommu-specific support, but interrupt handling already works, and userspace drivers for nommu systems can simply use physical mmio addresses from userspace directly anyway without mmap. Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12sh: add jcore emac support to j2 defconfigRich Felker-0/+1
2018-04-12ethernet/jcore_emac: add J-Core ethernet driverRich Felker-0/+1549
This is sloppy and not ready for upstream.
2018-04-12of: add J-Core cpu bindingsRich Felker-0/+49
Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12of: add vendor prefix for J-CoreRich Felker-0/+1
The J-Core project (j-core.org) produces open source cpu and SoC peripheral cores synthesizable as FPGA bitstreams or ASICs. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Rob Herring <robh@kernel.org>
2018-04-12arch/sh: pcie-sh7786: handle non-zero DMA offsetsh-for-4.17Thomas Petazzoni-0/+8
On SuperH, the base of the physical memory might be different from zero. In this case, PCI address zero will map to a non-zero physical address. In order to make sure that the DMA mapping API takes care of this DMA offset, we must fill in the dev->dma_pfn_offset field for PCI devices. This gets done in the pcibios_bus_add_device() hook, called for each new PCI device detected. The dma_pfn_offset global variable is re-calculated for every PCI controller available on the platform, but that's not an issue because its value will each time be exactly the same, as it only depends on the memory start address and memory size. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: adjust the memory mappingThomas Petazzoni-5/+14
The code setting up the PCI -> SuperHighway mapping doesn't take into account the fact that the address stored in PCIELARx must be aligned with the size stored in PCIELAMRx. For example, when your physical memory starts at 0x0800_0000 (128 MB), a size of 64 MB or 128 MB is fine. However, if you have 256 MB of memory, it doesn't work because the base address is not aligned on the size. In such situation, we have to round down the base address to make sure it is aligned on the size of the area. For for a 0x0800_0000 base address with 256 MB of memory, we will round down to 0x0, and extend the size of the mapping to 512 MB. This allows the mapping to work on platforms that have 256 MB of RAM. The current setup would only work with 128 MB of RAM or less. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: adjust PCI MEM and IO regionsThomas Petazzoni-18/+18
The current definition of the PCIe IO and MEM resources for SH7786 doesn't match what the datasheet says. For example, for PCIe0 0xfe100000 is advertised by the datasheet as a PCI IO region, while 0xfd000000 is advertised as a PCI MEM region. The code currently inverts the two. The SH4A_PCIEPARL and SH4A_PCIEPTCTLR registers allow to define the base address and role of the different regions (including whether it's a MEM or IO region). However, practical experience on a SH7786 shows that if 0xfe100000 is used for LEL and 0xfd000000 for IO, a PCIe device using two MEM BARs cannot be accessed at all. Simply using 0xfe100000 for IO and 0xfd000000 for MEM makes the PCIe device accessible. It is very likely that this was never seen because there are two other PCI MEM region listed in the resources. However, for different reasons, none of the two other MEM regions are usable on the specific SH7786 platform the problem was encountered. Therefore, the last MEM region at 0xfe100000 was used to place the BARs, making the device non-functional. This commit therefore adjusts those PCI MEM and IO resources definitions so that they match what the datasheet says. They have only been tested with PCIe 0. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: exclude unusable PCI MEM areasThomas Petazzoni-0/+12
Depending on the physical memory layout, some PCI MEM areas are not usable. According to the SH7786 datasheet, the PCI MEM area from 1000_0000 to 13FF_FFFF is only usable if the physical memory layout (in MMSELR) is 1, 2, 5 or 6. In all other configurations, this PCI MEM area is not usable (because it overlaps with DRAM). Therefore, this commit adjusts the PCI SH7786 initialization to mark the relevant PCI resource as IORESOURCE_DISABLED if we can't use it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: mark unavailable PCI resource as disabledThomas Petazzoni-0/+3
Some PCI MEM resources are marked as IORESOURCE_MEM_32BIT, which means they are only usable when the SH core runs in 32-bit mode. In 29-bit mode, such memory regions are not usable. The existing code for SH7786 properly skips such regions when configuring the PCIe controller registers. However, because such regions are still described in the resource array, the pcibios_scanbus() function in the SuperH pci.c will register them to the PCI core. Due to this, the PCI core will allocate MEM areas from this resource, and assign BARs pointing to this area, even though it's unusable. In order to prevent this from happening, we mark such regions as IORESOURCE_DISABLED, which tells the SuperH pci.c pcibios_scanbus() function to skip them. Note that we separate marking the region as disabled from skipping it, because other regions will be marked as disabled in follow-up patches. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pci: don't use disabled resourcesThomas Petazzoni-0/+5
In pcibios_scanbus(), we provide to the PCI core the usable MEM and IO regions using pci_add_resource_offset(). We travel through all resources available in the "struct pci_channel". Also, in register_pci_controller(), we travel through all resources to request them, making sure they don't conflict with already requested resources. However, some resources may be disabled, in which case they should not be requested nor provided to the PCI core. In the current situation, none of the resources are disabled. However, follow-up patches in this series will make some resources disabled, making this preliminary change necessary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: make the DMA mapping operations observe dev->dma_pfn_offsetThomas Petazzoni-4/+7
Some devices may have a non-zero DMA offset, i.e an offset between the DMA address and the physical address. Such an offset can be encoded into the dma_pfn_offset field of "struct device", but the SuperH implementation of the DMA mapping API does not observe this information. This commit fixes that by ensuring the DMA address is properly calculated depending on this DMA offset. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: add sh7786_mm_sel() functionThomas Petazzoni-0/+7
The SH7786 has different physical memory layout configurations, configurable through the MMSELR register. The configuration is typically defined by the bootloader, so Linux generally doesn't care. Except that depending on the configuration, some PCI MEM areas may or may not be available. This commit adds a helper function that allows to retrieve the current physical memory layout configuration. It will be used in a following patch to exclude unusable PCI MEM areas during the PCI initialization. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12sh: fix debug trap failure to process signals before return to userRich Felker-1/+1
When responding to a debug trap (breakpoint) in userspace, the kernel's trap handler raised SIGTRAP but returned from the trap via a code path that ignored pending signals, resulting in an infinite loop re-executing the trapping instruction. Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12sh: fix memory corruption of unflattened device treeRich Felker-6/+8
unflatten_device_tree() makes use of memblock allocation, and therefore must be called before paging_init() migrates the memblock allocation data to the bootmem framework. Otherwise the record of the allocation for the expanded device tree will be lost, and will eventually be clobbered when allocated for another use. Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12sh: fix futex FUTEX_OP_SET op on userspace addressesAurelien Jarno-4/+1
Commit 00b73d8d1b71 ("sh: add working futex atomic ops on userspace addresses for smp") changed the futex_atomic_op_inuser function to use a loop. In case of the FUTEX_OP_SET op with a userspace address containing a value different of 0, this loop is an endless loop. Fix that by loading the value of oldval from the userspace before doing the cmpxchg op, also for the FUTEX_OP_SET case. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-01Linux 4.16v4.16Linus Torvalds-1/+1
2018-03-31Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds-31/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/hwbp: Simplify the perf-hwbp code, fix documentation perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs
2018-03-31Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two UV platform fixes, and a kbuild fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/UV: Fix critical UV MMR address error x86/platform/uv/BAU: Add APIC idt entry x86/purgatory: Avoid creating stray .<pid>.d files, remove -MD from KBUILD_CFLAGS
2018-03-31Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PTI fixes from Ingo Molnar: "Two fixes: a relatively simple objtool fix that makes Clang built kernels work with ORC debug info, plus an alternatives macro fix" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Fixup alternative_call_2 objtool: Add Clang support
2018-03-30Merge tag 'kbuild-fixes-v4.16-3' of ↵Linus Torvalds-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix missed rebuild of TRIM_UNUSED_KSYMS - fix rpm-pkg for GNU tar >= 1.29 - include scripts/dtc/include-prefixes/* to kernel header deb-pkg - add -no-integrated-as option ealier to fix building with Clang - fix netfilter Makefile for parallel building * tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: netfilter: nf_nat_snmp_basic: add correct dependency to Makefile kbuild: rpm-pkg: Support GNU tar >= 1.29 builddeb: Fix header package regarding dtc source links kbuild: set no-integrated-as before incl. arch Makefile kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
2018-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds-384/+793
Pull networking fixes from David Miller: 1) Fix RCU locking in xfrm_local_error(), from Taehee Yoo. 2) Fix return value assignments and thus error checking in iwl_mvm_start_ap_ibss(), from Johannes Berg. 3) Don't count header length twice in vti4, from Stefano Brivio. 4) Fix deadlock in rt6_age_examine_exception, from Eric Dumazet. 5) Fix out-of-bounds access in nf_sk_lookup_slow{v4,v6}() from Subash Abhinov. 6) Check nladdr size in netlink_connect(), from Alexander Potapenko. 7) VF representor SQ numbers are 32 not 16 bits, in mlx5 driver, from Or Gerlitz. 8) Out of bounds read in skb_network_protocol(), from Eric Dumazet. 9) r8169 driver sets driver data pointer after register_netdev() which is too late. Fix from Heiner Kallweit. 10) Fix memory leak in mlx4 driver, from Moshe Shemesh. 11) The multi-VLAN decap fix added a regression when dealing with device that lack a MAC header, such as tun. Fix from Toshiaki Makita. 12) Fix integer overflow in dynamic interrupt coalescing code. From Tal Gilboa. 13) Use after free in vrf code, from David Ahern. 14) IPV6 route leak between VRFs fix, also from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: mvneta: fix enable of all initialized RXQs net/ipv6: Fix route leaking between VRFs vrf: Fix use after free and double free in vrf_finish_output ipv6: sr: fix seg6 encap performances with TSO enabled net/dim: Fix int overflow vlan: Fix vlan insertion for packets without ethernet header net: Fix untag for vlan packets without ethernet header atm: iphase: fix spelling mistake: "Receiverd" -> "Received" vhost: validate log when IOTLB is enabled qede: Do not drop rx-checksum invalidated packets. hv_netvsc: enable multicast if necessary ip_tunnel: Resolve ipsec merge conflict properly. lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write) qede: Fix barrier usage after tx doorbell write. vhost: correctly remove wait queue during poll failure net/mlx4_core: Fix memory leak while delete slave's resources net/mlx4_en: Fix mixed PFC and Global pause user control requests net/smc: use announced length in sock_recvmsg() llc: properly handle dev_queue_xmit() return value strparser: Fix sign of err codes ...
2018-03-30net: mvneta: fix enable of all initialized RXQsYelena Krivosheev-0/+1
In mvneta_port_up() we enable relevant RX and TX port queues by write queues bit map to an appropriate register. q_map must be ZERO in the beginning of this process. Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net/ipv6: Fix route leaking between VRFsDavid Ahern-0/+3
Donald reported that IPv6 route leaking between VRFs is not working. The root cause is the strict argument in the call to rt6_lookup when validating the nexthop spec. ip6_route_check_nh validates the gateway and device (if given) of a route spec. It in turn could call rt6_lookup (e.g., lookup in a given table did not succeed so it falls back to a full lookup) and if so sets the strict argument to 1. That means if the egress device is given, the route lookup needs to return a result with the same device. This strict requirement does not work with VRFs (IPv4 or IPv6) because the oif in the flow struct is overridden with the index of the VRF device to trigger a match on the l3mdev rule and force the lookup to its table. The right long term solution is to add an l3mdev index to the flow struct such that the oif is not overridden. That solution will not backport well, so this patch aims for a simpler solution to relax the strict argument if the route spec device is an l3mdev slave. As done in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the RT6_LOOKUP_F_IFACE flag needs to be removed. Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Reported-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30vrf: Fix use after free and double free in vrf_finish_outputDavid Ahern-2/+3
Miguel reported an skb use after free / double free in vrf_finish_output when neigh_output returns an error. The vrf driver should return after the call to neigh_output as it takes over the skb on error path as well. Patch is a simplified version of Miguel's patch which was written for 4.9, and updated to top of tree. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30ipv6: sr: fix seg6 encap performances with TSO enabledDavid Lebrun-9/+7
Enabling TSO can lead to abysmal performances when using seg6 in encap mode, such as with the ixgbe driver. This patch adds a call to iptunnel_handle_offloads() to remove the encapsulation bit if needed. Before: root@comp4-seg6bpf:~# iperf3 -c fc00::55 Connecting to host fc00::55, port 5201 [ 4] local fc45::4 port 36592 connected to fc00::55 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 196 KBytes 1.60 Mbits/sec 47 6.66 KBytes [ 4] 1.00-2.00 sec 304 KBytes 2.49 Mbits/sec 100 5.33 KBytes [ 4] 2.00-3.00 sec 284 KBytes 2.32 Mbits/sec 92 5.33 KBytes After: root@comp4-seg6bpf:~# iperf3 -c fc00::55 Connecting to host fc00::55, port 5201 [ 4] local fc45::4 port 43062 connected to fc00::55 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 1.03 GBytes 8.89 Gbits/sec 0 743 KBytes [ 4] 1.00-2.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes [ 4] 2.00-3.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes Reported-by: Tom Herbert <tom@quantonium.net> Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30Merge tag 'ceph-for-4.16-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds-3/+6
Pull ceph fix from Ilya Dryomov: "A fix for a dio-enabled loop on ceph deadlock from Zheng, marked for stable" * tag 'ceph-for-4.16-rc8' of git://github.com/ceph/ceph-client: ceph: only dirty ITER_IOVEC pages for direct read
2018-03-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds-24/+25
Pull KVM fixes from Radim Krčmář: "PPC: - Fix a bug causing occasional machine check exceptions on POWER8 hosts (introduced in 4.16-rc1) x86: - Fix a guest crashing regression with nested VMX and restricted guest (introduced in 4.16-rc1) - Fix dependency check for pv tlb flush (the wrong dependency that effectively disabled the feature was added in 4.16-rc4, the original feature in 4.16-rc1, so it got decent testing)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix pv tlb flush dependencies KVM: nVMX: sync vmcs02 segment regs prior to vmx_set_cr0 KVM: PPC: Book3S HV: Fix duplication of host SLB entries
2018-03-30Merge branch 'i2c/for-current' of ↵Linus Torvalds-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "A simple but worthwhile I2C driver fix for 4.16" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: fix no check on returned setup
2018-03-30Merge tag 'sound-4.16' of ↵Linus Torvalds-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Very small fixes (all one-liners) at this time. One fix is for a PCM core stuff to correct the mmap behavior on non-x86. It doesn't show on most machines but mostly only for exotic non-interleaved formats" * tag 'sound-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: potential uninitialized return values ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent() ALSA: usb-audio: Add native DSD support for TEAC UD-301
2018-03-30net/dim: Fix int overflowTal Gilboa-1/+1
When calculating difference between samples, the values are multiplied by 100. Large values may cause int overflow when multiplied (usually on first iteration). Fixed by forcing 100 to be of type unsigned long. Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30Merge branch 'vlan-fix'David S. Miller-4/+17
Toshiaki Makita says: ==================== Fix vlan tag handling for vlan packets without ethernet headers Eric Dumazet reported syzbot found a new bug which leads to underflow of size argument of memmove(), causing crash[1]. This can be triggered by tun devices. The underflow happened because skb_vlan_untag() did not expect vlan packets without ethernet headers, and tun can produce such packets. I also checked vlan_insert_inner_tag() and found a similar bug. This series fixes these problems. [1] https://marc.info/?l=linux-netdev&m=152221753920510&w=2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30vlan: Fix vlan insertion for packets without ethernet headerToshiaki Makita-2/+13
In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol. When we have a vlan device with reorder_hdr disabled on top of the tun device, such packets from tun devices are untagged in skb_vlan_untag() and vlan headers will be inserted back in vlan_insert_inner_tag(). vlan_insert_inner_tag() however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed. We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Also don't write vlan protocol in skb->data when it does not have enough room for it. Fixes: cbe7128c4b92 ("vlan: Fix out of order vlan headers with reorder header off") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: Fix untag for vlan packets without ethernet headerToshiaki Makita-2/+4
In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol, and skb_vlan_untag() attempts to untag such packets. skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it) however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed and triggered crash. ==== BUG: unable to handle kernel paging request at ffff8801cccb8000 IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101 Oops: 000b [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287 RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2 RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000 RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899 R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4 R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40 FS: 00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: memmove include/linux/string.h:360 [inline] skb_reorder_vlan_header net/core/skbuff.c:5031 [inline] skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061 __netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701 netif_receive_skb+0xae/0x390 net/core/dev.c:4725 tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555 tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962 tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454879 RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879 RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000 Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20 RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28 CR2: ffff8801cccb8000 ==== We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Fixes: 4bbb3e0e8239 ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30atm: iphase: fix spelling mistake: "Receiverd" -> "Received"Colin Ian King-1/+1
Trivial fix to spelling mistake in message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30ceph: only dirty ITER_IOVEC pages for direct readYan, Zheng-3/+6
If a page is already locked, attempting to dirty it leads to a deadlock in lock_page(). This is what currently happens to ITER_BVEC pages when a dio-enabled loop device is backed by ceph: $ losetup --direct-io /dev/loop0 /mnt/cephfs/img $ xfs_io -c 'pread 0 4k' /dev/loop0 Follow other file systems and only dirty ITER_IOVEC pages. Cc: stable@kernel.org Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-29Merge tag 'for-4.16/dm-fixes-4' of ↵Linus Torvalds-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix a DM multipath regression introduced in a v4.16-rc6 commit: restore support for loading, and attaching, scsi_dh modules during multipath table load. Otherwise some users may find themselves unable to boot, as was reported today: https://marc.info/?l=linux-scsi&m=152231276114962&w=2 - Fix a DM core ioctl permission check regression introduced in a v4.16-rc5 commit. * tag 'for-4.16/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix dropped return code from dm_get_bdev_for_ioctl dm mpath: fix support for loading scsi_dh modules during table load
2018-03-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds-40/+102
Pull rdma fixes from Jason Gunthorpe: "It has been fairly silent lately on our -rc front. Big queue of patches on the mailing list going to for-next though. Bug fixes: - qedr driver bugfixes causing application hangs, wrong uapi errnos, and a race condition - three syzkaller found bugfixes in the ucma uapi Regression fixes for things introduced in 4.16: - Crash on error introduced in mlx5 UMR flow - Crash on module unload/etc introduced by bad interaction of restrack and mlx5 patches this cycle - Typo in a two line syzkaller bugfix causing a bad regression - Coverity report of nonsense code in hns driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/ucma: Introduce safer rdma_addr_size() variants RDMA/hns: ensure for-loop actually iterates and free's buffers RDMA/ucma: Check that device exists prior to accessing it RDMA/ucma: Check that device is connected prior to access it RDMA/rdma_cm: Fix use after free race with process_one_req RDMA/qedr: Fix QP state initialization race RDMA/qedr: Fix rc initialization on CNQ allocation failure RDMA/qedr: fix QP's ack timeout configuration RDMA/ucma: Correct option size check using optlen RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init IB/mlx5: Don't clean uninitialized UMR resources
2018-03-29Merge tag 'mtd/fixes-for-4.16' of git://git.infradead.org/linux-mtdLinus Torvalds-1/+3
Pull MTD fixes from Boris Brezillon: "Two fixes, one in the atmel NAND driver and another one in the CFI/JEDEC code. Summary: - Fix a bug in Atmel ECC engine driver - Fix a bug in the CFI/JEDEC driver" * tag 'mtd/fixes-for-4.16' of git://git.infradead.org/linux-mtd: mtd: jedec_probe: Fix crash in jedec_read_mfr() mtd: nand: atmel: Fix get_sectorsize() function
2018-03-29dm: fix dropped return code from dm_get_bdev_for_ioctlMike Snitzer-3/+5
dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it wasn't). Unfortunately commit 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") reused the variable 'r' to store the return from blkdev_get() that follows prepare_ioctl() -- whereby dropping prepare_ioctl()'s result on the floor. This can lead to an ioctl or persistent reservation being issued to a partition going unnoticed, which implies the extra permission check for CAP_SYS_RAWIO is skipped. Fix this by using a different variable to store blkdev_get()'s return. Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") Reported-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller-2/+6
Daniel Borkman says: ==================== pull-request: bpf 2018-03-29 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix nfp to properly check max insn count while emitting instructions in the JIT which was wrongly comparing bytes against number of instructions before, from Jakub. 2) Fix for bpftool to avoid usage of hex numbers in JSON output since JSON doesn't accept hex numbers with 0x prefix, also from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29dm mpath: fix support for loading scsi_dh modules during table loadMike Snitzer-1/+1
The ability to have multipath dynamically attach a scsi_dh, that the user specified in the multipath table, was broken by commit e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue"). Restore the ability to load, and attach, a particular scsi_dh module if one is specified (as noticed by checking m->hw_handler_name). Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue") Reported-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-29vhost: validate log when IOTLB is enabledJason Wang-8/+6
Vq log_base is the userspace address of bitmap which has nothing to do with IOTLB. So it needs to be validated unconditionally otherwise we may try use 0 as log_base which may lead to pin pages that will lead unexpected result (e.g trigger BUG_ON() in set_bit_to_user()). Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Do not drop rx-checksum invalidated packets.Manish Chopra-8/+2
Today, driver drops received packets which are indicated as invalid checksum by the device. Instead of dropping such packets, pass them to the stack with CHECKSUM_NONE indication in skb. Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29mtd: jedec_probe: Fix crash in jedec_read_mfr()Linus Walleij-0/+2
It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [<c03a2bf4>] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: <stable@vger.kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: nand: atmel: Fix get_sectorsize() functionBoris Brezillon-1/+1
get_sectorsize() was not using the appropriate macro to extract the ECC sector size from the config cache, which led to buggy ECC when using 1024 byte sectors. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: <stable@vger.kernel.org> Reported-by: Olivier Schonken <olivier.schonken@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Olivier Schonken <olivier.schonken@gmail.com>
2018-03-29hv_netvsc: enable multicast if necessaryStephen Hemminger-1/+1
My recent change to netvsc drive in how receive flags are handled broke multicast. The Hyper-v/Azure virtual interface there is not a multicast filter list, filtering is only all or none. The driver must enable all multicast if any multicast address is present. Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29ip_tunnel: Resolve ipsec merge conflict properly.David S. Miller-6/+6
We want to use dev_set_mtu() regardless of how we calculate the mtu value. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29lan78xx: Crash in lan78xx_writ_reg (Workqueue: events ↵Raghuram Chary J-2/+21
lan78xx_deferred_multicast_write) Description: Crash was reported with syzkaller pointing to lan78xx_write_reg routine. Root-cause: Proper cleanup of workqueues and init/setup routines was not happening in failure conditions. Fix: Handled the error conditions by cleaning up the queues and init/setup routines. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29Merge branch 'master' of ↵David S. Miller-18/+38
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-03-29 1) Fix a rcu_read_lock/rcu_read_unlock imbalance in the error path of xfrm_local_error(). From Taehee Yoo. 2) Some VTI MTU fixes. From Stefano Brivio. 3) Fix a too early overwritten skb control buffer on xfrm transport mode. Please note that this pull request has a merge conflict in net/ipv4/ip_tunnel.c. The conflict is between commit f6cc9c054e77 ("ip_tunnel: Emit events for post-register MTU changes") from the net tree and commit 24fc79798b8d ("ip_tunnel: Clamp MTU to bounds on new link") from the ipsec tree. It can be solved as it is currently done in linux-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>