summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
AgeCommit message (Collapse)AuthorLines
2020-05-07ARM: dts: am57xx: fix networking on boards with ksz9031 phyGrygorii Strashko-2/+2
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on boards: am571x-idk am572x-idk am574x-idk am57xx-beagle-x15 All above boards have phy-mode = "rgmii" and this is worked before because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the KSZ9031 PHY starts handling phy mode properly and disables RX delay, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Philippe Schenker <philippe.schenker@toradex.com> Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: beagle-x15-common: Model 5V0 regulatorKishon Vijay Abraham I-0/+21
On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodesKishon Vijay Abraham I-4/+0
PERST# line in the PCIE connector is driven by the host mode and not EP mode. The gpios property here is used for driving the PERST# line. Remove gpios property from all endpoint device tree nodes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13Merge branch 'ti-sysc-fixes' into fixesTony Lindgren-5/+2
2019-07-24ARM: dts: Fix flags for gpio7Tony Lindgren-1/+1
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings: dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init Reviewed-by: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-06-27ARM: dts: am57xx: Disable voltage switching for SD cardFaiz Abbas-0/+1
If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Because the beaglebone X15 (rev A,B and C), am57xx-idks and am57xx-evms don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). commit 88a748419b84 ("ARM: dts: am57xx-idk: Remove support for voltage switching for SD card") did this only for idk boards. Do it for all affected boards. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-12ARM: dts: dra7: Separate AM57 dtsi filesRoger Quadros-1/+1
AM5 and DRA7 SoC families have different set of modules in them so the SoC sepecific dtsi files need to be separated. e.g. Some of the major differences between AM576 and DRA76 DRA76x AM576x USB3 x USB4 x ATL x VCP x MLB x ISS x PRU-ICSS1 x PRU-ICSS2 x This patch only deals with disabling USB3, USB4 and ATL for AM57 variants. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-10-18ARM: dts: dra7: convert to use new clkctrl layoutTero Kristo-1/+1
Convert DRA7xx to use the new clockdomain based layout. Previously the clkctrl split was based on CM isntance boundaries. The new layout helps with introducing the interconnect driver instances. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-03ARM: dts: dra7: Use sdhci-omap programming modelKishon Vijay Abraham I-2/+2
Use sdhci-omap programming model based on the generic sdhci library for programming the eMMC/SD/SDIO controller. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28ARM: dts: am57xx-beagle-x15: Add "vqmmc-supply" property for mmc2Kishon Vijay Abraham I-0/+1
Add "vqmmc-supply" property for mmc2 to indicate the supply connected to the IO lines. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-01-04Merge tag 'omap-for-v4.16/dt-pt2-v2-signed' of ↵Olof Johansson-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of device tree changes for omaps for v4.16 merge window This branch mostly configures more hardware support: - Clean-up dts files to remove leading 0x and 0s from binding notation to remove more dtc compiler warnings - A series of am437x updates for backlight, to fix inverted pad pull macro, and to configure power management related OPPs - Configure n950 and droid 4 command mode LCD panels - Updates to pandora and gta04 LCD panels - Add support for am574x-idk - A series of changes to configure more dra7 related PCIe features - A series of fixes for am335x-boneblue for WLAN, UARTs and CAN configuration - A series of changes to configure dra7 OPPs and VDD supplies * tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits) Revert "ARM: dts: dra7: Add properties to enable PCIe x2 lane mode" ARM: dts: am572x-idk: Add cpu0 vdd supply ARM: dts: am571x-idk: Add cpu0 vdd supply ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supply ARM: dts: dra7-evm: Add cpu0 vdd supply ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supply ARM: dts: dra7: Enable 1.5 GHz operation for the CPU ARM: dts: dra7: Add MPU OPP supply node ARM: dts: dra7: Add vbb-supply to cpu and additional voltages ARM: dts: am335x-boneblue: enable can ARM: dts: am335x-boneblue: enable usarts ARM: dts: am335x-boneblue: fix wl1835 IRQ pin ARM: dts: dra7: Remove deprecated PCI compatible string ARM: dts: dra76-evm: Enable x2 PCIe lanes ARM: dts: DRA72x: Use PCIe compatible specific to dra72 ARM: dts: DRA74x: Use PCIe compatible specific to dra74 ARM: dts: dra7: Add properties to enable PCIe x2 lane mode ARM: dts: am57xx: Add support for am574x-idk ARM: dts: am43x-epos-evm: Hook dcdc2 as the cpu0-supply ARM: dts: am437x-idk-evm: Disable OPP50 for MPU ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-12-21ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supplyDave Gerlach-1/+1
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11ARM: dts: dra7: add clkctrl nodesTero Kristo-1/+1
Add clkctrl nodes for DRA7 SoC. These are going to be acting as replacement for part of the existing clock data and the existing clkctrl hooks under hwmod data. This patch also removes any obsolete clock nodes, and reroutes all users for these to use the new clkctrl clocks instead. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMCKishon Vijay Abraham I-28/+1
Include dra74x-mmc-iodelay.dtsi which has pinmux and IODelay configuration values for the various MMC modes for dra74 SoC and use it in the pinctrl properties of MMC devicetree nodes present in am57xx-beagle-x15/am57xx-beagle-x15-revb1. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-14ARM: dts: DRA7: Add pcie1 dt node for EP modeKishon Vijay Abraham I-1/+6
Add pcie1 dt node in order for the controller to operate in endpoint mode. However since none of the dra7 based boards have slots configured to operate in endpoint mode, keep EP mode disabled. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-26ARM: dts: omap: Add generic compatible string for I2C EEPROMJavier Martinez Canillas-1/+1
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-20ARM: dts: am57xx: Add stdout-path propertyLokesh Vutla-0/+4
Add stdout-path property in /chosen node so that earlycon can be used by just adding earlycon in bootargs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to ↵Grygorii Strashko-2/+12
10/100 Mbps" According to errata i880 description the speed of Ethernet port 1 on AM572x SoCs rev 1.1 should be limited to 10/100Mbps, because RGMII2 Switching Characteristics are not compatible with 1000 Mbps operation [1]. The issue is fixed with Rev 2.0 silicon. Hence, rework Beagle-X15 and Begale-X15-revb1 to use phy-handle instead of phy_id and apply corresponding limitation to the Ethernet Phy 1. [1] http://www.ti.com/lit/er/sprz429j/sprz429j.pdf Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-23ARM: dts: am57xx-beagle-x15-common: Add overide powerhold propertyKeerthy-0/+1
The PMICs have POWERHOLD set by default which prevents PMIC shutdown even on DEV_CTRL On bit set to 0 as the Powerhold has higher priority. So to enable pmic power off this property lets one over ride the default value and enable pmic power off. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-15ARM: dts: am57xx-beagle-x15-common: Fix wrong pinctrl selection for mmc2Nishanth Menon-1/+1
Commit d20f997b4d1f ("ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869") fat fingered a change in which basically replaced mmc2_pinctrl_default with mmc1_pinctrl_default. And kernel dutifully reports conflict of usage. [...] pinctrl-single 4a003400.pinmux: pin 4a00376c.0 already requested by 4809c000.mmc; cannot claim for 480b4000.mmc pinctrl-single 4a003400.pinmux: pin-219 (480b4000.mmc) status -22 pinctrl-single 4a003400.pinmux: could not request pin 219 (4a00376c.0) from group mmc1_pins_default on device pinctrl-single omap_hsmmc 480b4000.mmc: Error applying setting, reverse things back omap_hsmmc 480b4000.mmc: could not initialize pin control state [...] But, thanks to the fact that we were in fact setting all the muxes in U-Boot, all the MMC devices were still properly detected. Fix the typo. Fixes: d20f997b4d1f ("ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869") Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: removed timestamps and wrapped description] Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-13ARM: dts: am57xx-beagle-x15: Add support for rev B1Nishanth Menon-0/+596
Latest update to the BeagleBoard-X15 platform (revision B1)[1] updates for allowing UHS SD cards to function with the split of supply to SD card from a dedicated LDO. As a result of this, AM57xx BeagleBoard-X15 now uses gpio2_30 instead of gpio6_28 for HDMI because HDMI_LS_OE should now be switched from GPIO6_28(Y9) to GPIO2_30 (AG8) to avoid a 1.8V GPIO toggling a 3.3V SoC input when the SD card is in UHS 1.8V mode. NOTE: For UHS mode to function, we need full fledged IODelay support in kernel to be functional. IODelay support is yet to be added. Further, It does not make much sense to spin off a new board compatible flag since there is no real functional benefit for the same. Note: Even though production version is supposed to be B1, there is over ~200 boards of previous version (A2)[2] out there which continue to get supported with the existing dts file (to maintain compatibility with existing bootloaders for A2) and the production board is now supported as revb1. [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BEAGLEBOARD_X15_REV_B1.pdf [2] http://marc.info/?l=linux-arm-kernel&m=147273929820708&w=2 Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>