| Age | Commit message (Collapse) | Author | Lines |
|---|
|
After commit 5b74eed3b301e2227385f3bf26d3bb7c2d822cf8 the timer thread
doesn't check whether timer_create() actually created the timer,
proceeding to wait for a signal that might never arrive. We can't fix
this by simply checking for a negative timer_id after
pthread_barrier_wait() because we have no way to distinguish a timer
creation failure and a request to delete a timer with INT_MAX id if it
happens to arrive quickly (a variation of this bug existed before
5b74eed3b301e2227385f3bf26d3bb7c2d822cf8, where the timer would be
leaked in this case). So (ab)use cancel field of pthread_t instead.
|
|
commit 4486c579cbf0d989080705f515d08cb48636ba88 disabled vdso
clock_gettime on arm due to a Linux kernel bug that was not understood
at the time, whereby the vdso function silently produced
catastrophically wrong results on some systems.
since then, the bug was tracked down to the way the arm kernel
disabled use of vdso clock_gettime on kernels where the necessary
timer was not available or was disabled. it simply patched out the
symbols, but it only did this for the legacy time32 functions, and
left the time64 function in place but non-operational. kernel commit
4405bdf3c57ec28d606bdf5325f1167505bfdcd4 (first present in 5.8)
provided the fix.
if this were a bug that impacted all users of the broken kernel
versions, we could probably ignore it and assume it had been patched
or replaced. however, it's very possible that these kernels appear in
the wild in devices running time32 userspace (glibc, musl 1.1.x, or
some other environment) where they appear to work fine, but where our
new binaries would fail catastrophically if we used the time64 vdso
function.
since the kernel has not (yet?) given us a way to probe for the
working time64 vdso function semantically, we work around the problem
by refusing to use the time64 one unless the time32 one is also
present. this will revert to not using vdso at all if the time32 one
is ever removed, but at least that's safe against wrong results and is
just a missed optimization.
|
|
the syscall used to probe availability of the clock fails with EINVAL
when the requested pid does not exist, but clock_getcpuclockid is
specified to use ESRCH for this purpose.
|
|
this isolates knowledge of the nonstandard AT_EMPTY_PATH extension to
one place and returns __map_file to its prior simplicity.
|
|
this function is used to implement some baseline ISO C interfaces, so
it cannot call any of the stat functions by their public names. use
the namespace-safe __fstatat instead.
|
|
riscv32 and future architectures only provide the clock_ functions.
|
|
this bug goes back to commit 1cc81f5cb0df2b66a795ff0c26d7bbc4d16e13c6
where zoneinfo file support was first added. in scan_trans, which
searches for the appropriate local time/dst rule in effect at a given
time, times prior to the second transition time caused the -1 slot of
the index to be read to determine the previous rule in effect. this
memory was always valid (part of another zoneinfo table in the mapped
file) but the byte value read was then used to index another table,
possibly going outside the bounds of the mmap. most of the time, the
result was limited to misinterpretation of the rule in effect at that
time (pre-1900s), but it could produce a crash if adjacent memory was
not readable.
the root cause of the problem, however, was that the logic for this
code path was all wrong. as documented in the comment, times before
the first transition should be treated as using the lowest-numbered
non-dst rule, or rule 0 if no non-dst rules exist. if the argument is
in units of local time, however, the rule prior to the first
transition is needed to determine if it falls before or after it, and
that's where the -1 index was wrongly used.
instead, use the documented logic to find out what rule would be in
effect before the first transition, and apply it as the offset if the
argument was given in local time.
the new code has not been heavily tested, but no longer performs
potentially out-of-bounds accesses, and successfully handles the 1883
transition from local mean time to central standard time in the test
case the error was reported for.
|
|
previously, the contents of the TZ variable were considered a
candidate for a file/path name only if they began with a colon or
contained a slash before any comma. the latter was very sloppy logic
to avoid treating any valid POSIX TZ string as a file name, but it
also triggered on values that are not valid POSIX TZ strings,
including 3-letter timezone names without any offset.
instead, only treat the TZ variable as POSIX form if it begins with a
nonzero standard time name followed by +, -, or a digit.
also, special case GMT and UTC to always be treated as POSIX form
(with implicit zero offset) so that a stray file by the same name
cannot break software that depends on setting TZ=GMT or TZ=UTC.
|
|
the v1 zoneinfo format with 32-bit time is deprecated. previously, the
v2 parsing code was only used if an exact match for '2' was found in
the version field of the header. this was already incorrect for v3
files (trivial differences from v2 that arguably didn't merit a new
version number anyway) but also failed to be future-proof.
|
|
since commit 38143339646a4ccce8afe298c34467767c899f51, the condition
sizeof(time_t) > 4 is always true, so there is no functional change
being made here. but semantically, the 64-bit tables should always be
preferred now, because upstream zic (zoneinfo compiler) has quietly
switched to emitting empty 32-bit tables by default, and the resulting
backwards-incompatible zoneinfo files will be encountered in the wild.
|
|
as the outcome of Austin Group tracker issue #62, future editions of
POSIX have dropped the requirement that fork be AS-safe. this allows
but does not require implementations to synchronize fork with internal
locks and give forked children of multithreaded parents a partly or
fully unrestricted execution environment where they can continue to
use the standard library (per POSIX, they can only portably use
AS-safe functions).
up until recently, taking this allowance did not seem desirable.
however, commit 8ed2bd8bfcb4ea6448afb55a941f4b5b2b0398c0 exposed the
extent to which applications and libraries are depending on the
ability to use malloc and other non-AS-safe interfaces in MT-forked
children, by converting latent very-low-probability catastrophic state
corruption into predictable deadlock. dealing with the fallout has
been a huge burden for users/distros.
while it looks like most of the non-portable usage in applications
could be fixed given sufficient effort, at least some of it seems to
occur in language runtimes which are exposing the ability to run
unrestricted code in the child as part of the contract with the
programmer. any attempt at fixing such contracts is not just a
technical problem but a social one, and is probably not tractable.
this patch extends the fork function to take locks for all libc
singletons in the parent, and release or reset those locks in the
child, so that when the underlying fork operation takes place, the
state protected by these locks is consistent and ready for the child
to use. locking is skipped in the case where the parent is
single-threaded so as not to interfere with legacy AS-safety property
of fork in single-threaded programs. lock order is mostly arbitrary,
but the malloc locks (including bump allocator in case it's used) must
be taken after the locks on any subsystems that might use malloc, and
non-AS-safe locks cannot be taken while the thread list lock is held,
imposing a requirement that it be taken last.
|
|
this change lifts undocumented restrictions on calls by replacement
mallocs to libc functions that might take these locks, and sets the
stage for lifting restrictions on the child execution environment
after multithreaded fork.
care is taken to #define macros to replace all four functions (malloc,
calloc, realloc, free) even if not all of them will be used, using an
undefined symbol name for the ones intended not to be used so that any
inadvertent future use will be caught at compile time rather than
directed to the wrong implementation.
|
|
This is like SIGEV_SIGNAL, but targeted to a particular thread's
tid, rather than the process.
|
|
this makes the code slightly smaller and eliminates timer_create from
relevance to possible future changes to multithreaded fork.
the barrier of a_store isn't technically needed here, but a_store is
used anyway for internal consistency of the memory model.
|
|
this was leftover from when the actual SIGEV_THREAD timer logic was in
the signal handler. commit 5b74eed3b301e2227385f3bf26d3bb7c2d822cf8
replaced that with use of sigwaitinfo, with the actual signal left
blocked, so the no-op signal handler was no longer serving any
purpose.
the signal disposition reset to SIG_DFL is still needed, however, in
case we inherited SIG_IGN from a foreign-libc process.
|
|
TZ containg a timezone name with >TZNAME_MAX characters currently
breaks musl's timezone parsing. getname() stops after TZNAME_MAX
characters. getoff() will consume no characters (because the next
character is not a digit) and incorrectly return 0. Then, because
there are remaining alphabetic characters, __daylight == 1, and
dst_off == -3600.
getname() must consume the entire timezone name, even if it will not
fit in d/__tzname, so when it returns, s points to the offset digits.
|
|
Parsing the timezone name must stop when reaching the null terminator.
In that case, there is no '>' to skip.
|
|
because struct stat is no longer assumed to correspond to the
structure used by the stat-family syscalls, it's not valid to make any
of these syscalls directly using a buffer of type struct stat.
commit 9493892021eac4edf1776d945bcdd3f7a96f6978 moved all logic around
this change for stat-family functions into fstatat.c, making the
others wrappers for it. but a few other direct uses of the syscall
were overlooked. the ones in tmpnam/tempnam are harmless since the
syscalls are just used to test for file existence. however, the uses
in fchmodat and __map_file depend on getting accurate file properties,
and these functions may actually have been broken one or more mips
variants due to removal of conversion hacks from syscall_arch.h.
as a low-risk fix, simply use struct kstat in place of struct stat in
the affected places.
|
|
in the timer thread start function, self->timer_id was accessed
without synchronization; the timer thread could fail to see the store
from the calling thread, resulting in timer_delete failing to delete
the correct kernel-level timer.
this fix is based on a patch by changdiankang, but with the load moved
to after receiving the timer_delete signal rather than just after the
start barrier, so as not to retain the possibility of data race with
timer_delete.
|
|
POSIX allows a null pointer, in which case the function only checks
the validity of the clock id argument.
|
|
at the point of this check, the pointer has already been dereferenced.
clock_settime is not defined for null pointer arguments.
|
|
commit 72f50245d018af0c31b38dec83c557a4e5dd1ea8 broke this by creating
a code path where r is uninitialized.
|
|
this fixes a major upcoming performance regression introduced by
commit 72f50245d018af0c31b38dec83c557a4e5dd1ea8, whereby 32-bit archs
would lose vdso clock_gettime after switching to 64-bit time_t, unless
the kernel supports time64 and provides a time64 version of the vdso
function. this would incur not just one but two syscalls: first, the
failed time64 syscall, then the fallback time32 one.
overflow of the 32-bit result is detected and triggers a revert to
syscalls. normally, on a system that's not Y2038-ready, this would
still overflow, but if the process has been migrated to a
time64-capable kernel or if the kernel has been hot-patched to add
time64 syscalls, it may conceivably work.
|
|
the time64 syscall has to be used if time_t is 64-bit, since there's
no way of knowing before making a syscall whether the result will fit
in 32 bits, and the 32-bit syscalls do not report overflow as an
error.
on 64-bit archs, there is no change to the code after preprocessing.
on current 32-bit archs, the result is now read from the kernel
through long[2] array, then copied into the timespec, to remove the
assumption that time_t is the same as long.
vdso clock_gettime is still used in place of a syscall if available.
32-bit archs with 64-bit time_t must use the time64 version of the
vdso function; if it's not available, performance will significantly
suffer. support for both vdso functions could be added, but would
break the ability to move a long-lived process from a pre-time64
kernel to one that can outlast Y2038 with checkpoint/resume, at least
without added hacks to identify that the 32-bit function is no longer
usable and stop using it (e.g. by seeing negative tv_sec). this
possibility may be explored in future work on the function.
|
|
the time64 syscall for this is not necessary or useful, since clock
resolution is generally better than 68-year granularity. if there's a
32-bit syscall, use it and expand the result into timespec; otherwise
there is only one syscall and it does the right thing to store to
timespec directly.
on 64-bit archs, there is no change to the code after preprocessing.
|
|
the time64 syscall has to be used if time_t is 64-bit, since there's
no way of knowing before making a syscall whether the result will fit
in 32 bits, and the 32-bit syscalls do not report overflow as an
error.
on 64-bit archs, there is no change to the code after preprocessing.
on current 32-bit archs, the result is now read from the kernel
through long[4] array, then copied into the timespec, to remove the
assumption that time_t is the same as long.
|
|
time64 syscall is used only if it's the only one defined for the arch,
or if the requested time does not fit in 32 bits. on current 32-bit
archs where time_t is a 32-bit type, this makes it statically
unreachable.
if the time64 syscall is needed because the requested time does not
fit in 32 bits, we define this as an error ENOTSUP, for "The
implementation does not support the requested feature or value".
on 64-bit archs, there is no change to the code after preprocessing.
on current 32-bit archs, the time is moved through an intermediate
copy to remove the assumption that time_t is a 32-bit type.
|
|
time64 syscall is used only if it's the only one defined for the arch,
if either component of the itimerspec does not fit in 32 bits, or if
time_t is 64-bit and the caller requested the old value, in which case
there's a possibility that the old value might not fit in 32 bits. on
current 32-bit archs where time_t is a 32-bit type, this makes it
statically unreachable.
on 64-bit archs, there is no change to the code after preprocessing.
on current 32-bit archs, the time is moved through an intermediate
copy to remove the assumption that time_t is a 32-bit type.
|
|
time64 syscall is used only if it's the only one defined for the arch,
or if the requested time does not fit in 32 bits. on current 32-bit
archs where time_t is a 32-bit type, this makes it statically
unreachable.
on 64-bit archs, there is no change to the code after preprocessing.
on current 32-bit archs, the time is moved through an intermediate
copy to remove the assumption that time_t is a 32-bit type.
|
|
for namespace-safety with thrd_sleep, this requires an alias, which is
also added. this eliminates all but one direct call point for
nanosleep syscalls, and arranges that 64-bit time_t conversion logic
will only need to exist in one file rather than three.
as a bonus, clock_nanosleep with CLOCK_REALTIME and empty flags is now
implemented as SYS_nanosleep, thereby working on older kernels that
may lack POSIX clocks functionality.
|
|
whether signals need to be blocked at thread start, and whether
unblocking is necessary in the entry point function, has historically
depended on intricacies of the cancellation design and on whether
there are scheduling operations to perform on the new thread before
its successful creation can be committed. future changes to track an
AS-safe list of live threads will require signals to be blocked
whenever changes are made to the list, so ...
prior to commits b8742f32602add243ee2ce74d804015463726899 and
40bae2d32fd6f3ffea437fa745ad38a1fe77b27e, a signal mask for the entry
function to restore was part of the pthread structure. it was removed
to trim down the size of the structure, which both saved a small
amount of stack space and improved code generation on archs where
small immediate displacements are less costly than arbitrary ones, by
limiting the range of offsets between the base of the thread
structure, its members, and the thread pointer. these commits moved
the saved mask to a special structure used only when special
scheduling was needed, in which case the pthread_create caller and new
thread had to synchronize with each other and could use this memory to
pass a mask.
this commit partially reverts the above two commits, but instead of
putting the mask back in the pthread structure, it moves all "start
argument" members out of the pthread structure, trimming it down
further, and puts them in a separate structure passed on the new
thread's stack. the code path for explicit scheduling of the new
thread is also changed to synchronize with the calling thread in such
a way to avoid spurious futex wakes.
|
|
this eliminates some ugly hacks that were repurposing the start
function and start argument fields in the pthread structure for timer
use, and the need to longjmp out of a signal handler.
|
|
commit a6054e3c94aa0491d7366e4b05ae0d73f661bfe2 removed the argument,
making it a constraint violation to pass one. caught by cparser/firm;
other compilers seem to ignore it.
|
|
a caller needs the reason for open (or fstat, albeit unlikely) failure
if it's going to make decisions about continuing a path search or
similar.
|
|
do_tzset() did't always reset the DST transition rules r0 and r1. That
means the rules from older TZ settings could leak into newer ones.
|
|
this further reduces the number of source files which need to include
libc.h and thereby be potentially exposed to libc global state and
internals.
this will also facilitate further improvements like adding an inline
fast-path, if we want to do so later.
|
|
libc.h was intended to be a header for access to global libc state and
related interfaces, but ended up included all over the place because
it was the way to get the weak_alias macro. most of the inclusions
removed here are places where weak_alias was needed. a few were
recently introduced for hidden. some go all the way back to when
libc.h defined CANCELPT_BEGIN and _END, and all (wrongly implemented)
cancellation points had to include it.
remaining spurious users are mostly callers of the LOCK/UNLOCK macros
and files that use the LFS64 macro to define the awful *64 aliases.
in a few places, new inclusion of libc.h is added because several
internal headers no longer implicitly include libc.h.
declarations for __lockfile and __unlockfile are moved from libc.h to
stdio_impl.h so that the latter does not need libc.h. putting them in
libc.h made no sense at all, since the macros in stdio_impl.h are
needed to use them correctly anyway.
|
|
|
|
|
|
|
|
commits leading up to this one have moved the vast majority of
libc-internal interface declarations to appropriate internal headers,
allowing them to be type-checked and setting the stage to limit their
visibility. the ones that have not yet been moved are mostly
namespace-protected aliases for standard/public interfaces, which
exist to facilitate implementing plain C functions in terms of POSIX
functionality, or C or POSIX functionality in terms of extensions that
are not standardized. some don't quite fit this description, but are
"internally public" interfacs between subsystems of libc.
rather than create a number of newly-named headers to declare these
functions, and having to add explicit include directives for them to
every source file where they're needed, I have introduced a method of
wrapping the corresponding public headers.
parallel to the public headers in $(srcdir)/include, we now have
wrappers in $(srcdir)/src/include that come earlier in the include
path order. they include the public header they're wrapping, then add
declarations for namespace-protected versions of the same interfaces
and any "internally public" interfaces for the subsystem they
correspond to.
along these lines, the wrapper for features.h is now responsible for
the definition of the hidden, weak, and weak_alias macros. this means
source files will no longer need to include any special headers to
access these features.
over time, it is my expectation that the scope of what is "internally
public" will expand, reducing the number of source files which need to
include *_impl.h and related headers down to those which are actually
implementing the corresponding subsystems, not just using them.
|
|
it's already included in all places where these are needed, and aside
from __tls_get_addr, they're all implementation internals.
|
|
this is a helper function from strftime that's also used by wcsftime.
|
|
this function was added later for strftime use and the existence of
time_impl.h as the appropriate place for it seems to have been
overlooked.
|
|
obviously the type "should be" const, but it inherited non-const from
the standard nl_langinfo_l.
|
|
get rid of a gratuitous translation unit and call frame between
asctime_r and the actual implementation of the function. this is the
way gmtime_r and localtime_r are already done.
|
|
|
|
This manifests itself in mktime if tm_isdst = 1 and the current TZ= is
a POSIX timezone specification. mktime would see that tm_isdst was set
to 0 by __secs_to_zone, and subtract 'oppoff' (dst_off) - gmtoff from
the resultant time. This meant that mktime returned a time that was
exactly double the GMT offset of the desired timezone when tm_isdst
was = 1.
|
|
the sign character produced came from the sign of tm_gmtoff/3600 as an
integer division, which is zero for negative offsets smaller in
magnitude than 3600. instead of printing the hours and minutes as
separate fields, print them as a single value of the form
hours*100+minutes, which naturally has the correct sign.
|
|
the expression (tm->__tm_gmtoff)/3600 has type long. use %+.2ld instead.
|
