| Age | Commit message (Collapse) | Author | Lines |
|---|
|
this was missed in the previous commit.
|
|
on x32, this change allows programs which use syscall() with pointers
or 64-bit values as arguments to work correctly, i.e. without
truncation or incorrect sign extension. on all other supported archs,
syscall_arg_t is defined as long, so this change is a no-op.
|
|
the incorrect error codes also made their way into errno when
__ptsname_r was called by plain ptsname, which reports errors via
errno rather than a return value.
|
|
it's UB to fetch variadic args when none are passed, and this caused
real crashes on ppc due to its calling convention, which defines that
for variadic functions aggregate types be passed as pointers.
the assignment caused that pointer to get dereferenced, resulting in
a crash.
|
|
the printf floating point formatting code contains an optimization to
avoid computing digits that will be thrown away by rounding at the
specified (or default) precision. while it was correctly retaining all
places up to the last decimal place to be printed, it was not
retaining enough precision to see the next nonzero decimal place in
all cases. this could cause incorrect rounding down in round-to-even
(default) rounding mode, for example, when printing 0.5+DBL_EPSILON
with "%.0f".
in the fix, LDBL_MANT_DIG/3 is a lazy (non-sharp) upper bound on the
number of zeros between any two nonzero decimal digits.
|
|
empirically the overflow was an off-by-one, and it did not seem to be
overwriting meaningful data. rather than simply increasing the buffer
size by one, however, I have attempted to make the size obviously
correct in terms of bounds on the number of iterations for the loops
that fill the buffer. this still results in no more than a negligible
size increase of the buffer on the stack (6-7 32-bit slots) and is a
"safer" fix unless/until somebody wants to do the proof that a smaller
buffer would suffice.
|
|
neither is correct; different commands take different argument types,
and some take no arguments at all. I have a much larger overhaul of
fcntl prepared to address this, but it's not appropriate to commit
during freeze.
the immediate problem being addressed affects forward-compatibility on
x32: if new commands are added and they take pointers, but the
libc-level fcntl function is not aware of them, using long would
sign-extend the pointer to 64 bits and give the kernel an invalid
pointer. on the kernel side, the argument to fcntl is always treated
as unsigned long, so no harm is done by treating possibly-signed
integer arguments as unsigned. for every command that takes an integer
argument except for F_SETOWN, large integer arguments and negative
arguments are handled identically anyway. in the case of F_SETOWN, the
kernel is responsible for converting the argument which it received as
unsigned long to int, so the sign of negative arguments is recovered.
the other problem that will be addressed later is that the type passed
to va_arg does not match the type in the caller of fcntl. an advanced
compiler doing cross-translation-unit analysis could potentially see
this mismatch and issue warnings or otherwise make trouble.
on i386, this patch was confirmed not to alter the code generated by
gcc 4.7.3. in principle the generated code should not be affected on
any arch except x32.
|
|
the kernel uses long longs in the struct, but the documentation
says they're long. so we need to fixup the mismatch between the
userspace and kernelspace structs.
since the struct offers a mem_unit member, we can avoid truncation
by adjusting that value.
|
|
if we ever encounter other targets where error codes don't fit in the
8-bit range, the table should probably just be bumped to 16-bit, but
for now I don't want to increase the table size on all archs just
because of a bug in the mips abi.
|
|
|
|
linux, gcc, etc. all use "sh" as the name for the superh arch. there
was already some inconsistency internally in musl: the dynamic linker
was searching for "ld-musl-sh.path" as its path file despite its own
name being "ld-musl-superh.so.1". there was some sentiment in both
directions as to how to resolve the inconsistency, but overall "sh"
was favored.
|
|
per POSIX, ENOENT is reserved for invalid stream position; it is an
optional error and would only happen if the application performs
invalid seeks on the underlying file descriptor. however, linux's
getdents syscall also returns ENOENT if the directory was removed
between the time it was opened and the time of the read. we need to
catch this case and remap it to simple end-of-file condition (null
pointer return value like an error, but no change to errno). this
issue reportedly affects GNU make in certain corner cases.
rather than backing up and restoring errno, I've just changed the
syscall to be made in a way that doesn't affect errno (via an inline
syscall rather than a call to the __getdents function). the latter
still exists for the purpose of providing the public getdents alias
which sets errno.
|
|
the build system has no automatic way to know this code applies to
both big (default) and little endian variants, so explicit .sub files
are needed.
|
|
Userspace emulated floating-point (gcc -msoft-float) is not compatible
with the default mips abi (assumes an FPU or in kernel emulation of it).
Soft vs hard float abi should not be mixed, __mips_soft_float is checked
in musl's configure script and there is no runtime check. The -sf subarch
does not save/restore floating-point registers in setjmp/longjmp and only
provides dummy fenv implementation.
|
|
|
|
|
|
|
|
|
|
|
|
some 32-on-64 archs require that the actual syscall args be long long.
in that case syscall_arch.h can define syscall_arg_t to whatever it needs
and syscall.h picks it up.
all other archs just use long as usual.
|
|
this allows syscall_arch.h to define the macro __scc if special
casting is needed, as is the case for x32, where the actual syscall
arguments are 64bit, but, in case of pointers, would get sign-extended
and thus become invalid.
|
|
the other atomic FD_CLOEXEC interfaces (dup3, pipe2, socket) already
had such emulation in place. the justification for doing the emulation
here is the same as for the other functions: it allows applications to
simply use accept4 rather than having to have their own fallback code
for ENOSYS/EINVAL (which one you get is arch-specific!) and there is
no reasonable way an application could benefit from knowing the
operation is emulated/non-atomic since there is no workaround at the
application level for non-atomicity (that is the whole reason these
interfaces were added).
|
|
based on patch by orc.
|
|
this was unlikely to lead to any crash or dangerous behavior, but
caused adjacent string constants to be treated as part of the
protocols table, possibly returning nonsensical results for unknown
protocol names/numbers or when getprotoent was called in a loop to
enumerate all protocols.
|
|
this is a requirement in the specification that was overlooked.
|
|
The architecture-specific assembly versions of clone did not set errno on
failure, which is inconsistent with glibc. __clone still returns the error
via its return value, and clone is now a wrapper that sets errno as needed.
The public clone has also been moved to src/linux, as it's not directly
related to the pthreads API.
__clone is called by pthread_create, which does not report errors via
errno. Though not strictly necessary, it's nice to avoid clobbering errno
here.
|
|
|
|
the default fenv was not set up properly, in particular the
tag word that indicates the contents of the x87 registers was
set to 0 (used) instead of 0xffff (empty)
this could cause random crashes after setting the default fenv
because it corrupted the fpu stack and then any float computation
gives NaN result breaking the program logic (usually after a
float to integer conversion).
|
|
this saves a syscall in the case where the underlying open already
took place with O_APPEND, which is common because fopen with append
modes sets O_APPEND at the time of open before passing the file
descriptor to __fdopen.
|
|
when there is unflushed output, ftello (and ftell) compute the logical
stream position as the underlying file descriptor's offset plus an
adjustment for the amount of buffered data. however, this can give the
wrong result for append-mode streams where the unflushed writes should
adjust the logical position to be at the end of the file, as if a seek
to end-of-file takes place before the write.
the solution turns out to be a simple trick: when ftello (indirectly)
calls lseek to determine the current file offset, use SEEK_END instead
of SEEK_CUR if the stream is append-mode and there's unwritten
buffered data.
the ISO C rules regarding switching between reading and writing for a
stream opened in an update mode, along with the POSIX rules regarding
switching "active handles", conveniently leave undefined the
hypothetical usage cases where this fix might lead to observably
incorrect offsets.
the bug being fixed was discovered via the test case for glibc issue
|
|
|
|
the incorrect check for crossing device boundaries was preventing nftw
from traversing anything except the initially provided pathname.
|
|
posix allows zero length destination
|
|
STB_WEAK is only a weak reference for undefined symbols (those with a
section of SHN_UNDEF). otherwise, it's a weak definition. normally
this distinction would not matter, since a relocation referencing a
symbol that also provides a definition (not SHN_UNDEF) will always
succeed in finding the referenced symbol itself. however, in the case
of copy relocations, the referenced symbol itself is ignored in order
to search for another symbol to copy from, and thus it's possible that
no definition is found. in this case, if the symbol being resolved
happened to be a weak definition, it was misinterpreted as a weak
reference, suppressing the error path and causing a crash when the
copy relocation was performed with a null source pointer passed to
memcpy.
there are almost certainly still situations in which invalid
combinations of symbol and relocation types can cause the dynamic
linker to crash (this is pretty much inevitable), but the intent is
that crashes not be possible for symbol/relocation tables produced by
a valid linker.
|
|
setstate could use the results of previous initstate or setstate
calls (they return the old state buffer), but the documentation
requires that an initialized state buffer should be possible to
use in setstate immediately, which means that initstate should
save the generator parameters in it.
I also removed the copyright notice since it is present in the
copyright file.
|
|
|
|
this glibc abi compatibility function was missed when the scanf
aliases were added.
|
|
weak_alias was only in the c code, so drem was missing on platforms
where remainder is implemented in asm.
|
|
per POSIX, the variadic argument has type union semun, which may
contain a pointer or int; the type read depends on the command being
issued. this allows the userspace part of the implementation to be
type-correct without requiring special-casing for different commands.
the kernel always expects to receive the argument interpreted as
unsigned long (or equivalently, a pointer), and does its own handling
of extracting the int portion from the representation, as needed.
this change fixes two possible issues: most immediately, reading the
argument as a (signed) long and passing it to the syscall would
perform incorrect sign-extension of pointers on the upcoming x32
target. the other possible issue is that some archs may use different
(user-space) argument-passing convention for unions, preventing va_arg
from correctly obtaining the argument when the type long (or even
unsigned long or void *) is passed to it.
|
|
really, fcntl should be changed to use the correct type corresponding
to cmd when calling va_arg, and to carry the correct type through
until making the syscall. however, this greatly increases binary size
and does not seem to offer any benefits except formal correctness, so
I'm holding off on that change for now.
the minimal changes made in this patch are in preparation for addition
of the x32 port, where the syscall macros need to know whether their
arguments are pointers or integers in order to properly pass them to
the 64-bit kernel.
|
|
it's unclear what the historical signature for this function was, but
semantically, the argument should be a pointer to const, and this is
what glibc uses. correct programs should not be using this function
anyway, so it's unlikely to matter.
|
|
both the kernel and glibc agree that this argument is unsigned; the
incorrect type ssize_t came from erroneous man pages.
|
|
this change is consistent with the corresponding glibc functions and
is semantically const-correct. the incorrect argument types without
const seem to have been taken from erroneous man pages.
|
|
this was wrong since the original commit adding inotify, and I don't
see any explanation for it. not even the man pages have it wrong. it
was most likely a copy-and-paste error.
|
|
the type int was taken from seemingly erroneous man pages. glibc uses
in_addr_t (uint32_t), and semantically, the arguments should be
unsigned.
|
|
this practice came from very early, before internal/syscall.h defined
macros that could accept pointer arguments directly and handle them
correctly. aside from being ugly and unnecessary, it looks like it
will be problematic when we add support for 32-bit ABIs on archs where
registers (and syscall arguments) are 64-bit, e.g. x32 and mips n32.
|
|
this agrees with implementation practice on glibc and BSD systems, and
is the const-correct way to do things; it eliminates warnings from
passing pointers to const. the prototype without const came from
seemingly erroneous man pages.
|
|
|
|
the header is included only as a guard to check that the declaration
and definition match, so the typo didn't cause any breakage aside
from omitting this check.
|
|
the reasons are the same as for sbrk. unlike sbrk, there is no safe
usage because brk does not return any useful information, so it should
just fail unconditionally.
|
