summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJason Wessel <jason.wessel@windriver.com>2009-06-22 11:32:20 -0500
committerGreg Kroah-Hartman <gregkh@suse.de>2009-07-12 15:16:39 -0700
commit6e4061210150d1d6d388c5fba05f6b49a306a27e (patch)
tree7c059e60623fab637b2049bdf59b42040025b00b
parentbf7fbb022f0a3da27a2bcf8d7c973c813d942384 (diff)
downloadlinux-sh-6e4061210150d1d6d388c5fba05f6b49a306a27e.tar.gz
USB: console: Fix regression in usb console on kernel boot
The commit 335f8514f200e63d689113d29cb7253a5c282967 introduced a regression which stopped usb consoles from working correctly as a kernel boot console as well as interactive login device. The addition of the serial_close() which in turn calls tty_port_close_start() will change the reference count of port.count and warn about it. The usb console code had previously incremented the port.count to indicate it was making use of the device as a console and the forced change causes a double open on the usb device which leads to a non obvious kernel oops later on when the tty is freed. To fix the problem instead make use of port->console to track if the port is in fact an active console port to avoid double initialization of the usb serial device. The port.count is incremented and decremented only with in the scope of usb_console_setup() for the purpose of the low level driver initialization. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/usb/serial/console.c13
-rw-r--r--drivers/usb/serial/usb-serial.c3
2 files changed, 9 insertions, 7 deletions
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 247b61bfb7f4..0e4f2e41ace5 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,9 +169,11 @@ static int usb_console_setup(struct console *co, char *options)
kfree(tty);
}
}
- /* So we know not to kill the hardware on a hangup on this
- port. We have also bumped the use count by one so it won't go
- idle */
+ /* Now that any required fake tty operations are completed restore
+ * the tty port count */
+ --port->port.count;
+ /* The console is special in terms of closing the device so
+ * indicate this port is now acting as a system console. */
port->console = 1;
retval = 0;
@@ -204,7 +206,7 @@ static void usb_console_write(struct console *co,
dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- if (!port->port.count) {
+ if (!port->console) {
dbg("%s - port not opened", __func__);
return;
}
@@ -300,8 +302,7 @@ void usb_serial_console_exit(void)
{
if (usbcons_info.port) {
unregister_console(&usbcons);
- if (usbcons_info.port->port.count)
- usbcons_info.port->port.count--;
+ usbcons_info.port->console = 0;
usbcons_info.port = NULL;
}
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index a84216464ca0..9e6027b3a2e9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -220,7 +220,8 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
- if (port->port.count == 1) {
+ /* If the console is attached, the device is already open */
+ if (port->port.count == 1 && !port->console) {
/* lock this module before we call it
* this may fail, which means we must bail out,