summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-04-19 11:10:42 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-04-19 11:10:42 -0700
commitb222e9af0a250141b302d671d2d1e73e9079c544 (patch)
tree0e9a7495c919945f385ccb343a4e4c109625f5d9
parentf9764dd4d3befedba403fbb20d99566f4d26829d (diff)
parentaf4b54a2e5ba18259ff9aac445bf546dd60d037e (diff)
downloadlinux-sh-b222e9af0a250141b302d671d2d1e73e9079c544.tar.gz
Merge tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO fixes from Greg KH: "Here is a bunch of IIO driver fixes, and some smaller staging driver fixes, for 5.1-rc6. The IIO fixes were delayed due to my vacation, but all resolve a number of reported issues and have been in linux-next for a few weeks with no reported issues. The other staging driver fixes are all tiny, resolving some reported issues in the comedi and most drivers, as well as some erofs fixes. All of these patches have been in linux-next with no reported issues" * tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits) staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf staging: comedi: ni_usb6501: Fix use of uninitialized mutex staging: erofs: fix unexpected out-of-bound data access staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf staging: comedi: vmk80xx: Fix use of uninitialized semaphore staging: most: core: use device description as name iio: core: fix a possible circular locking dependency iio: ad_sigma_delta: select channel when reading register iio: pms7003: select IIO_TRIGGERED_BUFFER iio: cros_ec: Fix the maths for gyro scale calculation iio: adc: xilinx: prevent touching unclocked h/w on remove iio: adc: xilinx: fix potential use-after-free on probe iio: adc: xilinx: fix potential use-after-free on remove iio: dac: mcp4725: add missing powerdown bits in store eeprom io: accel: kxcjk1013: restore the range after resume. iio:chemical:bme680: Fix SPI read interface iio:chemical:bme680: Fix, report temperature in millidegrees iio: chemical: fix missing Kconfig block for sgp30 iio: adc: at91: disable adc channel interrupt in timeout case iio: gyro: mpu3050: fix chip ID reading ...
-rw-r--r--drivers/iio/accel/kxcjk-1013.c2
-rw-r--r--drivers/iio/adc/ad_sigma_delta.c1
-rw-r--r--drivers/iio/adc/at91_adc.c28
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c3
-rw-r--r--drivers/iio/chemical/Kconfig14
-rw-r--r--drivers/iio/chemical/bme680.h6
-rw-r--r--drivers/iio/chemical/bme680_core.c54
-rw-r--r--drivers/iio/chemical/bme680_i2c.c21
-rw-r--r--drivers/iio/chemical/bme680_spi.c115
-rw-r--r--drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c7
-rw-r--r--drivers/iio/dac/mcp4725.c1
-rw-r--r--drivers/iio/gyro/bmg160_core.c6
-rw-r--r--drivers/iio/gyro/mpu3050-core.c8
-rw-r--r--drivers/iio/industrialio-buffer.c5
-rw-r--r--drivers/iio/industrialio-core.c4
-rw-r--r--drivers/staging/comedi/drivers/ni_usb6501.c10
-rw-r--r--drivers/staging/comedi/drivers/vmk80xx.c8
-rw-r--r--drivers/staging/erofs/data.c2
-rw-r--r--drivers/staging/iio/adc/ad7192.c8
-rw-r--r--drivers/staging/iio/meter/ade7854.c2
-rw-r--r--drivers/staging/most/core.c2
21 files changed, 192 insertions, 115 deletions
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 7096e577b23f..50f3ff386bea 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1437,6 +1437,8 @@ static int kxcjk1013_resume(struct device *dev)
mutex_lock(&data->mutex);
ret = kxcjk1013_set_mode(data, OPERATION);
+ if (ret == 0)
+ ret = kxcjk1013_set_range(data, data->range);
mutex_unlock(&data->mutex);
return ret;
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index ff5f2da2e1b1..54d9978b2740 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -121,6 +121,7 @@ static int ad_sd_read_reg_raw(struct ad_sigma_delta *sigma_delta,
if (sigma_delta->info->has_registers) {
data[0] = reg << sigma_delta->info->addr_shift;
data[0] |= sigma_delta->info->read_mask;
+ data[0] |= sigma_delta->comm;
spi_message_add_tail(&t[0], &m);
}
spi_message_add_tail(&t[1], &m);
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 75d2f73582a3..596841a3c4db 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -704,23 +704,29 @@ static int at91_adc_read_raw(struct iio_dev *idev,
ret = wait_event_interruptible_timeout(st->wq_data_avail,
st->done,
msecs_to_jiffies(1000));
- if (ret == 0)
- ret = -ETIMEDOUT;
- if (ret < 0) {
- mutex_unlock(&st->lock);
- return ret;
- }
-
- *val = st->last_value;
+ /* Disable interrupts, regardless if adc conversion was
+ * successful or not
+ */
at91_adc_writel(st, AT91_ADC_CHDR,
AT91_ADC_CH(chan->channel));
at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel));
- st->last_value = 0;
- st->done = false;
+ if (ret > 0) {
+ /* a valid conversion took place */
+ *val = st->last_value;
+ st->last_value = 0;
+ st->done = false;
+ ret = IIO_VAL_INT;
+ } else if (ret == 0) {
+ /* conversion timeout */
+ dev_err(&idev->dev, "ADC Channel %d timeout.\n",
+ chan->channel);
+ ret = -ETIMEDOUT;
+ }
+
mutex_unlock(&st->lock);
- return IIO_VAL_INT;
+ return ret;
case IIO_CHAN_INFO_SCALE:
*val = st->vref_mv;
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index b13c61539d46..6401ca7a9a20 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1292,6 +1292,7 @@ static int xadc_probe(struct platform_device *pdev)
err_free_irq:
free_irq(xadc->irq, indio_dev);
+ cancel_delayed_work_sync(&xadc->zynq_unmask_work);
err_clk_disable_unprepare:
clk_disable_unprepare(xadc->clk);
err_free_samplerate_trigger:
@@ -1321,8 +1322,8 @@ static int xadc_remove(struct platform_device *pdev)
iio_triggered_buffer_cleanup(indio_dev);
}
free_irq(xadc->irq, indio_dev);
+ cancel_delayed_work_sync(&xadc->zynq_unmask_work);
clk_disable_unprepare(xadc->clk);
- cancel_delayed_work(&xadc->zynq_unmask_work);
kfree(xadc->data);
kfree(indio_dev->channels);
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index d5d146e9e372..92c684d2b67e 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -64,6 +64,7 @@ config IAQCORE
config PMS7003
tristate "Plantower PMS7003 particulate matter sensor"
depends on SERIAL_DEV_BUS
+ select IIO_TRIGGERED_BUFFER
help
Say Y here to build support for the Plantower PMS7003 particulate
matter sensor.
@@ -71,6 +72,19 @@ config PMS7003
To compile this driver as a module, choose M here: the module will
be called pms7003.
+config SENSIRION_SGP30
+ tristate "Sensirion SGPxx gas sensors"
+ depends on I2C
+ select CRC8
+ help
+ Say Y here to build I2C interface support for the following
+ Sensirion SGP gas sensors:
+ * SGP30 gas sensor
+ * SGPC3 low power gas sensor
+
+ To compile this driver as module, choose M here: the
+ module will be called sgp30.
+
config SPS30
tristate "SPS30 particulate matter sensor"
depends on I2C
diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h
index 0ae89b87e2d6..4edc5d21cb9f 100644
--- a/drivers/iio/chemical/bme680.h
+++ b/drivers/iio/chemical/bme680.h
@@ -2,11 +2,9 @@
#ifndef BME680_H_
#define BME680_H_
-#define BME680_REG_CHIP_I2C_ID 0xD0
-#define BME680_REG_CHIP_SPI_ID 0x50
+#define BME680_REG_CHIP_ID 0xD0
#define BME680_CHIP_ID_VAL 0x61
-#define BME680_REG_SOFT_RESET_I2C 0xE0
-#define BME680_REG_SOFT_RESET_SPI 0x60
+#define BME680_REG_SOFT_RESET 0xE0
#define BME680_CMD_SOFTRESET 0xB6
#define BME680_REG_STATUS 0x73
#define BME680_SPI_MEM_PAGE_BIT BIT(4)
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index 70c1fe4366f4..ccde4c65ff93 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -63,9 +63,23 @@ struct bme680_data {
s32 t_fine;
};
+static const struct regmap_range bme680_volatile_ranges[] = {
+ regmap_reg_range(BME680_REG_MEAS_STAT_0, BME680_REG_GAS_R_LSB),
+ regmap_reg_range(BME680_REG_STATUS, BME680_REG_STATUS),
+ regmap_reg_range(BME680_T2_LSB_REG, BME680_GH3_REG),
+};
+
+static const struct regmap_access_table bme680_volatile_table = {
+ .yes_ranges = bme680_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bme680_volatile_ranges),
+};
+
const struct regmap_config bme680_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
+ .max_register = 0xef,
+ .volatile_table = &bme680_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
};
EXPORT_SYMBOL(bme680_regmap_config);
@@ -316,6 +330,10 @@ static s16 bme680_compensate_temp(struct bme680_data *data,
s64 var1, var2, var3;
s16 calc_temp;
+ /* If the calibration is invalid, attempt to reload it */
+ if (!calib->par_t2)
+ bme680_read_calib(data, calib);
+
var1 = (adc_temp >> 3) - (calib->par_t1 << 1);
var2 = (var1 * calib->par_t2) >> 11;
var3 = ((var1 >> 1) * (var1 >> 1)) >> 12;
@@ -583,8 +601,7 @@ static int bme680_gas_config(struct bme680_data *data)
return ret;
}
-static int bme680_read_temp(struct bme680_data *data,
- int *val, int *val2)
+static int bme680_read_temp(struct bme680_data *data, int *val)
{
struct device *dev = regmap_get_device(data->regmap);
int ret;
@@ -617,10 +634,9 @@ static int bme680_read_temp(struct bme680_data *data,
* compensate_press/compensate_humid to get compensated
* pressure/humidity readings.
*/
- if (val && val2) {
- *val = comp_temp;
- *val2 = 100;
- return IIO_VAL_FRACTIONAL;
+ if (val) {
+ *val = comp_temp * 10; /* Centidegrees to millidegrees */
+ return IIO_VAL_INT;
}
return ret;
@@ -635,7 +651,7 @@ static int bme680_read_press(struct bme680_data *data,
s32 adc_press;
/* Read and compensate temperature to get a reading of t_fine */
- ret = bme680_read_temp(data, NULL, NULL);
+ ret = bme680_read_temp(data, NULL);
if (ret < 0)
return ret;
@@ -668,7 +684,7 @@ static int bme680_read_humid(struct bme680_data *data,
u32 comp_humidity;
/* Read and compensate temperature to get a reading of t_fine */
- ret = bme680_read_temp(data, NULL, NULL);
+ ret = bme680_read_temp(data, NULL);
if (ret < 0)
return ret;
@@ -761,7 +777,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_TEMP:
- return bme680_read_temp(data, val, val2);
+ return bme680_read_temp(data, val);
case IIO_PRESSURE:
return bme680_read_press(data, val, val2);
case IIO_HUMIDITYRELATIVE:
@@ -867,8 +883,28 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
{
struct iio_dev *indio_dev;
struct bme680_data *data;
+ unsigned int val;
int ret;
+ ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
+ BME680_CMD_SOFTRESET);
+ if (ret < 0) {
+ dev_err(dev, "Failed to reset chip\n");
+ return ret;
+ }
+
+ ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+ if (ret < 0) {
+ dev_err(dev, "Error reading chip ID\n");
+ return ret;
+ }
+
+ if (val != BME680_CHIP_ID_VAL) {
+ dev_err(dev, "Wrong chip ID, got %x expected %x\n",
+ val, BME680_CHIP_ID_VAL);
+ return -ENODEV;
+ }
+
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
index b2f805b6b36a..de9c9e3d23ea 100644
--- a/drivers/iio/chemical/bme680_i2c.c
+++ b/drivers/iio/chemical/bme680_i2c.c
@@ -23,8 +23,6 @@ static int bme680_i2c_probe(struct i2c_client *client,
{
struct regmap *regmap;
const char *name = NULL;
- unsigned int val;
- int ret;
regmap = devm_regmap_init_i2c(client, &bme680_regmap_config);
if (IS_ERR(regmap)) {
@@ -33,25 +31,6 @@ static int bme680_i2c_probe(struct i2c_client *client,
return PTR_ERR(regmap);
}
- ret = regmap_write(regmap, BME680_REG_SOFT_RESET_I2C,
- BME680_CMD_SOFTRESET);
- if (ret < 0) {
- dev_err(&client->dev, "Failed to reset chip\n");
- return ret;
- }
-
- ret = regmap_read(regmap, BME680_REG_CHIP_I2C_ID, &val);
- if (ret < 0) {
- dev_err(&client->dev, "Error reading I2C chip ID\n");
- return ret;
- }
-
- if (val != BME680_CHIP_ID_VAL) {
- dev_err(&client->dev, "Wrong chip ID, got %x expected %x\n",
- val, BME680_CHIP_ID_VAL);
- return -ENODEV;
- }
-
if (id)
name = id->name;
diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
index d0b7bdd3f066..3b838068a7e4 100644
--- a/drivers/iio/chemical/bme680_spi.c
+++ b/drivers/iio/chemical/bme680_spi.c
@@ -12,28 +12,93 @@
#include "bme680.h"
+struct bme680_spi_bus_context {
+ struct spi_device *spi;
+ u8 current_page;
+};
+
+/*
+ * In SPI mode there are only 7 address bits, a "page" register determines
+ * which part of the 8-bit range is active. This function looks at the address
+ * and writes the page selection bit if needed
+ */
+static int bme680_regmap_spi_select_page(
+ struct bme680_spi_bus_context *ctx, u8 reg)
+{
+ struct spi_device *spi = ctx->spi;
+ int ret;
+ u8 buf[2];
+ u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */
+
+ if (page == ctx->current_page)
+ return 0;
+
+ /*
+ * Data sheet claims we're only allowed to change bit 4, so we must do
+ * a read-modify-write on each and every page select
+ */
+ buf[0] = BME680_REG_STATUS;
+ ret = spi_write_then_read(spi, buf, 1, buf + 1, 1);
+ if (ret < 0) {
+ dev_err(&spi->dev, "failed to set page %u\n", page);
+ return ret;
+ }
+
+ buf[0] = BME680_REG_STATUS;
+ if (page)
+ buf[1] |= BME680_SPI_MEM_PAGE_BIT;
+ else
+ buf[1] &= ~BME680_SPI_MEM_PAGE_BIT;
+
+ ret = spi_write(spi, buf, 2);
+ if (ret < 0) {
+ dev_err(&spi->dev, "failed to set page %u\n", page);
+ return ret;
+ }
+
+ ctx->current_page = page;
+
+ return 0;
+}
+
static int bme680_regmap_spi_write(void *context, const void *data,
size_t count)
{
- struct spi_device *spi = context;
+ struct bme680_spi_bus_context *ctx = context;
+ struct spi_device *spi = ctx->spi;
+ int ret;
u8 buf[2];
memcpy(buf, data, 2);
+
+ ret = bme680_regmap_spi_select_page(ctx, buf[0]);
+ if (ret)
+ return ret;
+
/*
* The SPI register address (= full register address without bit 7)
* and the write command (bit7 = RW = '0')
*/
buf[0] &= ~0x80;
- return spi_write_then_read(spi, buf, 2, NULL, 0);
+ return spi_write(spi, buf, 2);
}
static int bme680_regmap_spi_read(void *context, const void *reg,
size_t reg_size, void *val, size_t val_size)
{
- struct spi_device *spi = context;
+ struct bme680_spi_bus_context *ctx = context;
+ struct spi_device *spi = ctx->spi;
+ int ret;
+ u8 addr = *(const u8 *)reg;
+
+ ret = bme680_regmap_spi_select_page(ctx, addr);
+ if (ret)
+ return ret;
- return spi_write_then_read(spi, reg, reg_size, val, val_size);
+ addr |= 0x80; /* bit7 = RW = '1' */
+
+ return spi_write_then_read(spi, &addr, 1, val, val_size);
}
static struct regmap_bus bme680_regmap_bus = {
@@ -46,8 +111,8 @@ static struct regmap_bus bme680_regmap_bus = {
static int bme680_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
+ struct bme680_spi_bus_context *bus_context;
struct regmap *regmap;
- unsigned int val;
int ret;
spi->bits_per_word = 8;
@@ -57,45 +122,21 @@ static int bme680_spi_probe(struct spi_device *spi)
return ret;
}
+ bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL);
+ if (!bus_context)
+ return -ENOMEM;
+
+ bus_context->spi = spi;
+ bus_context->current_page = 0xff; /* Undefined on warm boot */
+
regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus,
- &spi->dev, &bme680_regmap_config);
+ bus_context, &bme680_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "Failed to register spi regmap %d\n",
(int)PTR_ERR(regmap));
return PTR_ERR(regmap);
}
- ret = regmap_write(regmap, BME680_REG_SOFT_RESET_SPI,
- BME680_CMD_SOFTRESET);
- if (ret < 0) {
- dev_err(&spi->dev, "Failed to reset chip\n");
- return ret;
- }
-
- /* after power-on reset, Page 0(0x80-0xFF) of spi_mem_page is active */
- ret = regmap_read(regmap, BME680_REG_CHIP_SPI_ID, &val);
- if (ret < 0) {
- dev_err(&spi->dev, "Error reading SPI chip ID\n");
- return ret;
- }
-
- if (val != BME680_CHIP_ID_VAL) {
- dev_err(&spi->dev, "Wrong chip ID, got %x expected %x\n",
- val, BME680_CHIP_ID_VAL);
- return -ENODEV;
- }
- /*
- * select Page 1 of spi_mem_page to enable access to
- * to registers from address 0x00 to 0x7F.
- */
- ret = regmap_write_bits(regmap, BME680_REG_STATUS,
- BME680_SPI_MEM_PAGE_BIT,
- BME680_SPI_MEM_PAGE_1_VAL);
- if (ret < 0) {
- dev_err(&spi->dev, "failed to set page 1 of spi_mem_page\n");
- return ret;
- }
-
return bme680_core_probe(&spi->dev, regmap, id->name);
}
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 89cb0066a6e0..8d76afb87d87 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -103,9 +103,10 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev,
* Do not use IIO_DEGREE_TO_RAD to avoid precision
* loss. Round to the nearest integer.
*/
- *val = div_s64(val64 * 314159 + 9000000ULL, 1000);
- *val2 = 18000 << (CROS_EC_SENSOR_BITS - 1);
- ret = IIO_VAL_FRACTIONAL;
+ *val = 0;
+ *val2 = div_s64(val64 * 3141592653ULL,
+ 180 << (CROS_EC_SENSOR_BITS - 1));
+ ret = IIO_VAL_INT_PLUS_NANO;
break;
case MOTIONSENSE_TYPE_MAG:
/*
diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c
index 6d71fd905e29..c701a45469f6 100644
--- a/drivers/iio/dac/mcp4725.c
+++ b/drivers/iio/dac/mcp4725.c
@@ -92,6 +92,7 @@ static ssize_t mcp4725_store_eeprom(struct device *dev,
inoutbuf[0] = 0x60; /* write EEPROM */
inoutbuf[0] |= data->ref_mode << 3;
+ inoutbuf[0] |= data->powerdown ? ((data->powerdown_mode + 1) << 1) : 0;
inoutbuf[1] = data->dac_value >> 4;
inoutbuf[2] = (data->dac_value & 0xf) << 4;
diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
index 63ca31628a93..92c07ab826eb 100644
--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -582,11 +582,10 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
return bmg160_get_filter(data, val);
case IIO_CHAN_INFO_SCALE:
- *val = 0;
switch (chan->type) {
case IIO_TEMP:
- *val2 = 500000;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val = 500;
+ return IIO_VAL_INT;
case IIO_ANGL_VEL:
{
int i;
@@ -594,6 +593,7 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
if (bmg160_scale_table[i].dps_range ==
data->dps_range) {
+ *val = 0;
*val2 = bmg160_scale_table[i].scale;
return IIO_VAL_INT_PLUS_MICRO;
}
diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
index 77fac81a3adc..5ddebede31a6 100644
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -29,7 +29,8 @@
#include "mpu3050.h"
-#define MPU3050_CHIP_ID 0x69
+#define MPU3050_CHIP_ID 0x68
+#define MPU3050_CHIP_ID_MASK 0x7E
/*
* Register map: anything suffixed *_H is a big-endian high byte and always
@@ -1176,8 +1177,9 @@ int mpu3050_common_probe(struct device *dev,
goto err_power_down;
}
- if (val != MPU3050_CHIP_ID) {
- dev_err(dev, "unsupported chip id %02x\n", (u8)val);
+ if ((val & MPU3050_CHIP_ID_MASK) != MPU3050_CHIP_ID) {
+ dev_err(dev, "unsupported chip id %02x\n",
+ (u8)(val & MPU3050_CHIP_ID_MASK));
ret = -ENODEV;
goto err_power_down;
}
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index cd5bfe39591b..dadd921a4a30 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -320,9 +320,8 @@ static int iio_scan_mask_set(struct iio_dev *indio_dev,
const unsigned long *mask;
unsigned long *trialmask;
- trialmask = kmalloc_array(BITS_TO_LONGS(indio_dev->masklength),
- sizeof(*trialmask),
- GFP_KERNEL);
+ trialmask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
+ sizeof(*trialmask), GFP_KERNEL);
if (trialmask == NULL)
return -ENOMEM;
if (!indio_dev->masklength) {
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 4700fd5d8c90..9c4d92115504 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -1743,10 +1743,10 @@ EXPORT_SYMBOL(__iio_device_register);
**/
void iio_device_unregister(struct iio_dev *indio_dev)
{
- mutex_lock(&indio_dev->info_exist_lock);
-
cdev_device_del(&indio_dev->chrdev, &indio_dev->dev);
+ mutex_lock(&indio_dev->info_exist_lock);
+
iio_device_unregister_debugfs(indio_dev);
iio_disable_all_buffers(indio_dev);
diff --git a/drivers/staging/comedi/drivers/ni_usb6501.c b/drivers/staging/comedi/drivers/ni_usb6501.c
index 808ed92ed66f..1bb1cb651349 100644
--- a/drivers/staging/comedi/drivers/ni_usb6501.c
+++ b/drivers/staging/comedi/drivers/ni_usb6501.c
@@ -463,10 +463,8 @@ static int ni6501_alloc_usb_buffers(struct comedi_device *dev)
size = usb_endpoint_maxp(devpriv->ep_tx);
devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
- if (!devpriv->usb_tx_buf) {
- kfree(devpriv->usb_rx_buf);
+ if (!devpriv->usb_tx_buf)
return -ENOMEM;
- }
return 0;
}
@@ -518,6 +516,9 @@ static int ni6501_auto_attach(struct comedi_device *dev,
if (!devpriv)
return -ENOMEM;
+ mutex_init(&devpriv->mut);
+ usb_set_intfdata(intf, devpriv);
+
ret = ni6501_find_endpoints(dev);
if (ret)
return ret;
@@ -526,9 +527,6 @@ static int ni6501_auto_attach(struct comedi_device *dev,
if (ret)
return ret;
- mutex_init(&devpriv->mut);
- usb_set_intfdata(intf, devpriv);
-
ret = comedi_alloc_subdevices(dev, 2);
if (ret)
return ret;
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index 6234b649d887..65dc6c51037e 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -682,10 +682,8 @@ static int vmk80xx_alloc_usb_buffers(struct comedi_device *dev)
size = usb_endpoint_maxp(devpriv->ep_tx);
devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
- if (!devpriv->usb_tx_buf) {
- kfree(devpriv->usb_rx_buf);
+ if (!devpriv->usb_tx_buf)
return -ENOMEM;
- }
return 0;
}
@@ -800,6 +798,8 @@ static int vmk80xx_auto_attach(struct comedi_device *dev,
devpriv->model = board->model;
+ sema_init(&devpriv->limit_sem, 8);
+
ret = vmk80xx_find_usb_endpoints(dev);
if (ret)
return ret;
@@ -808,8 +808,6 @@ static int vmk80xx_auto_attach(struct comedi_device *dev,
if (ret)
return ret;
- sema_init(&devpriv->limit_sem, 8);
-
usb_set_intfdata(intf, devpriv);
if (devpriv->model == VMK8055_MODEL)
diff --git a/drivers/staging/erofs/data.c b/drivers/staging/erofs/data.c
index 526e0dbea5b5..81af768e7248 100644
--- a/drivers/staging/erofs/data.c
+++ b/drivers/staging/erofs/data.c
@@ -298,7 +298,7 @@ submit_bio_retry:
*last_block = current_block;
/* shift in advance in case of it followed by too many gaps */
- if (unlikely(bio->bi_vcnt >= bio->bi_max_vecs)) {
+ if (bio->bi_iter.bi_size >= bio->bi_max_vecs * PAGE_SIZE) {
/* err should reassign to 0 after submitting */
err = 0;
goto submit_bio_out;
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index acdbc07fd259..2fc8bc22b57b 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -109,10 +109,10 @@
#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */
#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */
-#define AD7193_CH_AIN1P_AIN2M 0x000 /* AIN1(+) - AIN2(-) */
-#define AD7193_CH_AIN3P_AIN4M 0x001 /* AIN3(+) - AIN4(-) */
-#define AD7193_CH_AIN5P_AIN6M 0x002 /* AIN5(+) - AIN6(-) */
-#define AD7193_CH_AIN7P_AIN8M 0x004 /* AIN7(+) - AIN8(-) */
+#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */
+#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */
+#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */
+#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */
#define AD7193_CH_TEMP 0x100 /* Temp senseor */
#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */
#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index 029c3bf42d4d..07774c000c5a 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -269,7 +269,7 @@ static IIO_DEV_ATTR_VPEAK(0644,
static IIO_DEV_ATTR_IPEAK(0644,
ade7854_read_32bit,
ade7854_write_32bit,
- ADE7854_VPEAK);
+ ADE7854_IPEAK);
static IIO_DEV_ATTR_APHCAL(0644,
ade7854_read_16bit,
ade7854_write_16bit,
diff --git a/drivers/staging/most/core.c b/drivers/staging/most/core.c
index 18936cdb1083..956daf8c3bd2 100644
--- a/drivers/staging/most/core.c
+++ b/drivers/staging/most/core.c
@@ -1431,7 +1431,7 @@ int most_register_interface(struct most_interface *iface)
INIT_LIST_HEAD(&iface->p->channel_list);
iface->p->dev_id = id;
- snprintf(iface->p->name, STRING_SIZE, "mdev%d", id);
+ strcpy(iface->p->name, iface->description);
iface->dev.init_name = iface->p->name;
iface->dev.bus = &mc.bus;
iface->dev.parent = &mc.dev;