summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-10 11:58:25 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-10 11:58:25 -0800
commitd55fc37856244c929965c190c8e9dcb49e2c07aa (patch)
treeccb348340a6f0aac546b06487ea6a1d1d35490f6 /Documentation
parent42d4ebb42a17754d2e8344dc1aa486119671d0eb (diff)
parent75ecc64ef5a1f310fc80f732ad8cfb7e1bdc59d5 (diff)
downloadlinux-sh-d55fc37856244c929965c190c8e9dcb49e2c07aa.tar.gz
Merge branch 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - New drivers: UniPhier (with and without FIFO) - some drivers got some bigger rework: ismt, designware, img-scb (rcar had to be reverted because issues were showing up just lately) - ACPI: reworked the device scanning and added support for muxes ... and quite a lot of driver bugfixes and cleanups this time. All files touched outside of the i2c realm have proper acks. * 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits) i2c: rcar: Revert the latest refactoring series i2c: pnx: remove superfluous assignment MAINTAINERS: i2c: drop i2c-pnx maintainer MAINTAINERS: i2c: mark also subdirectories as maintained i2c: cadence: enable driver for ARM64 i2c: i801: Document Intel DNV and Broxton i2c: at91: manage unexpected RXRDY flag when starting a transfer i2c: pnx: Use setup_timer instead of open coding it i2c: add ACPI support for I2C mux ports acpi: add acpi_preset_companion() stub i2c: pxa: Add support for pxa910/988 & new configuration features i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource i2c-dev: Fix I2C_SLAVE ioctl comment i2c-dev: Fix typo in ioctl name reference i2c: sirf: tune the divider to make i2c bus freq more accurate i2c: imx: Use -ENXIO as error in the NACK case i2c: i801: Add support for Intel Broxton i2c: i801: Add support for Intel DNV i2c: mediatek: add i2c resume support i2c: imx: implement bus recovery ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/acpi/i2c-muxes.txt58
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-davinci.txt6
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-imx.txt9
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-rcar.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt25
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-uniphier.txt25
-rw-r--r--Documentation/i2c/busses/i2c-i8012
8 files changed, 124 insertions, 3 deletions
diff --git a/Documentation/acpi/i2c-muxes.txt b/Documentation/acpi/i2c-muxes.txt
new file mode 100644
index 000000000000..9fcc4f0b885e
--- /dev/null
+++ b/Documentation/acpi/i2c-muxes.txt
@@ -0,0 +1,58 @@
+ACPI I2C Muxes
+--------------
+
+Describing an I2C device hierarchy that includes I2C muxes requires an ACPI
+Device () scope per mux channel.
+
+Consider this topology:
+
++------+ +------+
+| SMB1 |-->| MUX0 |--CH00--> i2c client A (0x50)
+| | | 0x70 |--CH01--> i2c client B (0x50)
++------+ +------+
+
+which corresponds to the following ASL:
+
+Device (SMB1)
+{
+ Name (_HID, ...)
+ Device (MUX0)
+ {
+ Name (_HID, ...)
+ Name (_CRS, ResourceTemplate () {
+ I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED,
+ AddressingMode7Bit, "^SMB1", 0x00,
+ ResourceConsumer,,)
+ }
+
+ Device (CH00)
+ {
+ Name (_ADR, 0)
+
+ Device (CLIA)
+ {
+ Name (_HID, ...)
+ Name (_CRS, ResourceTemplate () {
+ I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
+ AddressingMode7Bit, "^CH00", 0x00,
+ ResourceConsumer,,)
+ }
+ }
+ }
+
+ Device (CH01)
+ {
+ Name (_ADR, 1)
+
+ Device (CLIB)
+ {
+ Name (_HID, ...)
+ Name (_CRS, ResourceTemplate () {
+ I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
+ AddressingMode7Bit, "^CH01", 0x00,
+ ResourceConsumer,,)
+ }
+ }
+ }
+ }
+}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
index a4e1cbc810c1..5b123e0e4cc2 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -1,10 +1,10 @@
-* Texas Instruments Davinci I2C
+* Texas Instruments Davinci/Keystone I2C
This file provides information, what the device node for the
-davinci i2c interface contain.
+davinci/keystone i2c interface contains.
Required properties:
-- compatible: "ti,davinci-i2c";
+- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
- reg : Offset and length of the register set for the device
Recommended properties :
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index ce4311d726ae..eab5836ba7f9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -14,6 +14,10 @@ Optional properties:
The absence of the propoerty indicates the default frequency 100 kHz.
- dmas: A list of two dma specifiers, one for each entry in dma-names.
- dma-names: should contain "tx" and "rx".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+ bus recovery, call it "gpio" state
Examples:
@@ -37,4 +41,9 @@ i2c0: i2c@40066000 { /* i2c0 on vf610 */
dmas = <&edma0 0 50>,
<&edma0 0 51>;
dma-names = "rx","tx";
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 16b3e07aa98f..ea406eb20fa5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -10,6 +10,7 @@ Required properties:
"renesas,i2c-r8a7792"
"renesas,i2c-r8a7793"
"renesas,i2c-r8a7794"
+ "renesas,i2c-r8a7795"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt specifier.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
index 2bfc6e7ed094..214f94c25d37 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
@@ -10,6 +10,7 @@ Required properties:
- "renesas,iic-r8a7792" (R-Car V2H)
- "renesas,iic-r8a7793" (R-Car M2-N)
- "renesas,iic-r8a7794" (R-Car E2)
+ - "renesas,iic-r8a7795" (R-Car H3)
- "renesas,iic-sh73a0" (SH-Mobile AG5)
- reg : address start and address range size of device
- interrupts : interrupt of device
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
new file mode 100644
index 000000000000..27fc6f8c798b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
@@ -0,0 +1,25 @@
+UniPhier I2C controller (FIFO-builtin)
+
+Required properties:
+- compatible: should be "socionext,uniphier-fi2c".
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: phandle to the input clock.
+
+Optional properties:
+- clock-frequency: desired I2C bus frequency in Hz. The maximum supported
+ value is 400000. Defaults to 100000 if not specified.
+
+Examples:
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
new file mode 100644
index 000000000000..26f9d95b3436
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
@@ -0,0 +1,25 @@
+UniPhier I2C controller (FIFO-less)
+
+Required properties:
+- compatible: should be "socionext,uniphier-i2c".
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: phandle to the input clock.
+
+Optional properties:
+- clock-frequency: desired I2C bus frequency in Hz. The maximum supported
+ value is 400000. Defaults to 100000 if not specified.
+
+Examples:
+
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 82f48f774afb..6a4b1af724f8 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -30,6 +30,8 @@ Supported adapters:
* Intel BayTrail (SOC)
* Intel Sunrise Point-H (PCH)
* Intel Sunrise Point-LP (PCH)
+ * Intel DNV (SOC)
+ * Intel Broxton (SOC)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller