summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
diff options
context:
space:
mode:
authorLin Yun Sheng <linyunsheng@huawei.com>2017-06-16 17:24:51 +0800
committerDavid S. Miller <davem@davemloft.net>2017-06-19 14:20:42 -0400
commit7fe5b914313ff67d71cb2b5aa4b850e0884e75dd (patch)
tree7839c37b5d2ee929265b75ea55e713c6e325ed48 /drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
parent9745e362add89432d2c951272a99b0a5fe4348a9 (diff)
downloadlinux-sh-7fe5b914313ff67d71cb2b5aa4b850e0884e75dd.tar.gz
net/hns:bugfix of ethtool -t phy self_test
This patch fixes the phy loopback self_test failed issue. when Marvell Phy Module is loaded, it will powerdown fiber when doing phy loopback self test, which cause phy loopback self_test fail. Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/hisilicon/hns/hns_ethtool.c')
-rw-r--r--drivers/net/ethernet/hisilicon/hns/hns_ethtool.c16
1 files changed, 14 insertions, 2 deletions
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index b8fab149690f..e95795b3c841 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -288,9 +288,15 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
/* Force 1000M Link, Default is 0x0200 */
phy_write(phy_dev, 7, 0x20C);
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
- /* Enable PHY loop-back */
+ /* Powerup Fiber */
+ phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
+ val = phy_read(phy_dev, COPPER_CONTROL_REG);
+ val &= ~PHY_POWER_DOWN;
+ phy_write(phy_dev, COPPER_CONTROL_REG, val);
+
+ /* Enable Phy Loopback */
+ phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
val = phy_read(phy_dev, COPPER_CONTROL_REG);
val |= PHY_LOOP_BACK;
val &= ~PHY_POWER_DOWN;
@@ -299,6 +305,12 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
phy_write(phy_dev, 1, 0x400);
phy_write(phy_dev, 7, 0x200);
+
+ phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
+ val = phy_read(phy_dev, COPPER_CONTROL_REG);
+ val |= PHY_POWER_DOWN;
+ phy_write(phy_dev, COPPER_CONTROL_REG, val);
+
phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
phy_write(phy_dev, 9, 0xF00);