summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/SubmittingPatches1
-rw-r--r--Documentation/devicetree/bindings/input/atmel,maxtouch.txt11
-rw-r--r--Documentation/devicetree/bindings/mfd/tc3589x.txt107
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nand.txt2
-rw-r--r--Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt39
-rw-r--r--Documentation/devicetree/bindings/net/broadcom-sf2.txt78
-rw-r--r--Documentation/devicetree/bindings/net/can/m_can.txt67
-rw-r--r--Documentation/devicetree/bindings/net/can/rcar_can.txt43
-rw-r--r--Documentation/devicetree/bindings/net/dsa/dsa.txt17
-rw-r--r--Documentation/devicetree/bindings/net/socfpga-dwmac.txt4
-rw-r--r--Documentation/devicetree/bindings/net/stmmac.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65090.txt4
-rw-r--r--Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt2
-rw-r--r--Documentation/dma-buf-sharing.txt14
-rw-r--r--Documentation/filesystems/nfs/nfs-rdma.txt16
-rw-r--r--Documentation/filesystems/seq_file.txt33
-rw-r--r--Documentation/gpio/consumer.txt24
-rw-r--r--Documentation/i2c/dev-interface10
-rw-r--r--Documentation/kdump/kdump.txt36
-rw-r--r--Documentation/misc-devices/lis3lv02d2
-rw-r--r--Documentation/networking/ip-sysctl.txt16
-rw-r--r--Documentation/networking/timestamping.txt368
-rw-r--r--Documentation/networking/timestamping/Makefile10
-rw-r--r--Documentation/networking/timestamping/txtimestamp.c469
-rw-r--r--Documentation/power/regulator/consumer.txt7
-rw-r--r--Documentation/power/regulator/design.txt8
-rw-r--r--Documentation/power/regulator/machine.txt4
-rw-r--r--Documentation/power/regulator/overview.txt6
-rw-r--r--Documentation/power/regulator/regulator.txt6
-rw-r--r--Documentation/sysctl/net.txt16
-rw-r--r--Documentation/this_cpu_ops.txt213
-rw-r--r--Documentation/x86/tlb.txt2
-rw-r--r--MAINTAINERS33
-rw-r--r--Makefile2
-rw-r--r--arch/alpha/include/asm/io.h12
-rw-r--r--arch/alpha/include/asm/unistd.h2
-rw-r--r--arch/alpha/include/uapi/asm/unistd.h3
-rw-r--r--arch/alpha/kernel/systbls.S3
-rw-r--r--arch/arc/mm/cache_arc700.c3
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/dts/am4372.dtsi4
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts6
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts9
-rw-r--r--arch/arm/boot/dts/at91rm9200.dtsi2
-rw-r--r--arch/arm/boot/dts/at91sam9g20.dtsi1
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts47
-rw-r--r--arch/arm/boot/dts/dra7.dtsi16
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi13
-rw-r--r--arch/arm/boot/dts/imx53-qsrb.dts8
-rw-r--r--arch/arm/boot/dts/imx53.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6dl-hummingboard.dts4
-rw-r--r--arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts3
-rw-r--r--arch/arm/boot/dts/imx6qdl-cubox-i.dtsi19
-rw-r--r--arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6sx-pinfunc.h26
-rw-r--r--arch/arm/boot/dts/omap3-beagle.dts1
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts2
-rw-r--r--arch/arm/boot/dts/omap3430-sdp.dts2
-rw-r--r--arch/arm/boot/dts/omap3xxx-clocks.dtsi1
-rw-r--r--arch/arm/boot/dts/omap54xx-clocks.dtsi16
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts7
-rw-r--r--arch/arm/boot/dts/rk3066a-bqcurie2.dts2
-rw-r--r--arch/arm/boot/dts/rk3188-radxarock.dts2
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts1
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi8
-rw-r--r--arch/arm/boot/dts/tegra30-apalis.dtsi11
-rw-r--r--arch/arm/boot/dts/tegra30-colibri.dtsi11
-rw-r--r--arch/arm/boot/dts/twl6030.dtsi4
-rw-r--r--arch/arm/boot/dts/vf610-twr.dts2
-rw-r--r--arch/arm/common/edma.c9
-rw-r--r--arch/arm/include/asm/cacheflush.h1
-rw-r--r--arch/arm/include/asm/cputype.h3
-rw-r--r--arch/arm/include/asm/elf.h1
-rw-r--r--arch/arm/include/asm/smp_plat.h15
-rw-r--r--arch/arm/kernel/entry-header.S29
-rw-r--r--arch/arm/kernel/module.c1
-rw-r--r--arch/arm/kvm/handle_exit.c2
-rw-r--r--arch/arm/kvm/init.S4
-rw-r--r--arch/arm/mach-at91/board-dt-rm9200.c11
-rw-r--r--arch/arm/mach-bcm/Makefile1
-rw-r--r--arch/arm/mach-bcm/brcmstb.h19
-rw-r--r--arch/arm/mach-bcm/headsmp-brcmstb.S33
-rw-r--r--arch/arm/mach-bcm/platsmp-brcmstb.c363
-rw-r--r--arch/arm/mach-exynos/mcpm-exynos.c1
-rw-r--r--arch/arm/mach-imx/Kconfig2
-rw-r--r--arch/arm/mach-imx/Makefile2
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c10
-rw-r--r--arch/arm/mach-imx/suspend-imx6.S2
-rw-r--r--arch/arm/mach-omap2/board-flash.c2
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c3
-rw-r--r--arch/arm/mach-omap2/gpmc.c14
-rw-r--r--arch/arm/mach-omap2/id.c2
-rw-r--r--arch/arm/mach-omap2/omap_device.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c7
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c22
-rw-r--r--arch/arm/mach-omap2/soc.h6
-rw-r--r--arch/arm/mach-shmobile/Kconfig2
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7790.c4
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7791.c2
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c2
-rw-r--r--arch/arm/mach-vexpress/spc.c14
-rw-r--r--arch/arm/mm/abort-ev6.S6
-rw-r--r--arch/arm/mm/abort-ev7.S6
-rw-r--r--arch/arm/net/bpf_jit_32.c3
-rw-r--r--arch/arm64/crypto/sha2-ce-glue.c1
-rw-r--r--arch/arm64/include/asm/hw_breakpoint.h1
-rw-r--r--arch/arm64/include/asm/processor.h2
-rw-r--r--arch/arm64/include/asm/ptrace.h2
-rw-r--r--arch/arm64/kernel/efi.c2
-rw-r--r--arch/arm64/kernel/fpsimd.c1
-rw-r--r--arch/arm64/kernel/head.S4
-rw-r--r--arch/arm64/kernel/perf_regs.c6
-rw-r--r--arch/arm64/kernel/ptrace.c13
-rw-r--r--arch/arm64/kernel/setup.c40
-rw-r--r--arch/arm64/kvm/handle_exit.c2
-rw-r--r--arch/arm64/kvm/hyp-init.S4
-rw-r--r--arch/hexagon/mm/cache.c1
-rw-r--r--arch/ia64/Kconfig2
-rw-r--r--arch/m68k/Kconfig2
-rw-r--r--arch/m68k/include/asm/unistd.h2
-rw-r--r--arch/m68k/include/uapi/asm/unistd.h2
-rw-r--r--arch/m68k/kernel/syscalltable.S2
-rw-r--r--arch/mips/Kconfig2
-rw-r--r--arch/mips/alchemy/devboards/db1200.c6
-rw-r--r--arch/mips/bcm47xx/setup.c13
-rw-r--r--arch/mips/cavium-octeon/setup.c19
-rw-r--r--arch/mips/include/asm/eva.h43
-rw-r--r--arch/mips/include/asm/gic.h2
-rw-r--r--arch/mips/include/asm/irq.h2
-rw-r--r--arch/mips/include/asm/mach-malta/kernel-entry-init.h22
-rw-r--r--arch/mips/include/asm/mach-netlogic/topology.h7
-rw-r--r--arch/mips/include/asm/pgtable.h8
-rw-r--r--arch/mips/include/asm/syscall.h8
-rw-r--r--arch/mips/kernel/cps-vec.S4
-rw-r--r--arch/mips/kernel/perf_event_mipsxx.c2
-rw-r--r--arch/mips/kernel/scall64-o32.S12
-rw-r--r--arch/mips/loongson/loongson-3/cop2-ex.c8
-rw-r--r--arch/mips/loongson/loongson-3/numa.c2
-rw-r--r--arch/mips/mm/cache.c27
-rw-r--r--arch/mips/mti-malta/malta-memory.c14
-rw-r--r--arch/mips/net/bpf_jit.c3
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq.c2
-rw-r--r--arch/powerpc/Kconfig2
-rw-r--r--arch/powerpc/kvm/book3s_64_mmu_hv.c4
-rw-r--r--arch/powerpc/net/bpf_jit_comp.c3
-rw-r--r--arch/s390/Kconfig2
-rw-r--r--arch/s390/include/asm/pgtable.h6
-rw-r--r--arch/s390/include/uapi/asm/unistd.h5
-rw-r--r--arch/s390/kernel/compat_wrapper.c3
-rw-r--r--arch/s390/kernel/ipl.c7
-rw-r--r--arch/s390/kernel/setup.c19
-rw-r--r--arch/s390/kernel/syscalls.S3
-rw-r--r--arch/s390/kvm/kvm-s390.c13
-rw-r--r--arch/s390/mm/pgtable.c10
-rw-r--r--arch/s390/net/bpf_jit_comp.c2
-rw-r--r--arch/sh/Kconfig5
-rw-r--r--arch/sh/mm/cache.c1
-rw-r--r--arch/sparc/net/bpf_jit_comp.c3
-rw-r--r--arch/tile/Kconfig2
-rw-r--r--arch/tile/kernel/smp.c1
-rw-r--r--arch/unicore32/kernel/signal.c9
-rw-r--r--arch/x86/Kbuild4
-rw-r--r--arch/x86/Kconfig18
-rw-r--r--arch/x86/Makefile6
-rw-r--r--arch/x86/include/asm/io_apic.h2
-rw-r--r--arch/x86/include/asm/pgtable.h9
-rw-r--r--arch/x86/kernel/Makefile2
-rw-r--r--arch/x86/kernel/apic/io_apic.c27
-rw-r--r--arch/x86/kernel/crash.c6
-rw-r--r--arch/x86/kernel/entry_32.S2
-rw-r--r--arch/x86/kernel/irqinit.c2
-rw-r--r--arch/x86/kernel/machine_kexec_64.c11
-rw-r--r--arch/x86/kernel/time.c2
-rw-r--r--arch/x86/mm/tlb.c10
-rw-r--r--arch/x86/net/bpf_jit_comp.c60
-rw-r--r--arch/x86/pci/intel_mid_pci.c2
-rw-r--r--arch/x86/pci/irq.c2
-rw-r--r--arch/x86/purgatory/Makefile6
-rw-r--r--arch/xtensa/Kconfig92
-rw-r--r--arch/xtensa/Makefile7
-rw-r--r--arch/xtensa/boot/dts/kc705.dts5
-rw-r--r--arch/xtensa/configs/common_defconfig1
-rw-r--r--arch/xtensa/configs/iss_defconfig3
-rw-r--r--arch/xtensa/configs/s6105_defconfig1
-rw-r--r--arch/xtensa/include/asm/cacheflush.h2
-rw-r--r--arch/xtensa/include/asm/fixmap.h30
-rw-r--r--arch/xtensa/include/asm/highmem.h40
-rw-r--r--arch/xtensa/include/asm/page.h14
-rw-r--r--arch/xtensa/include/asm/pgtable.h7
-rw-r--r--arch/xtensa/include/asm/uaccess.h5
-rw-r--r--arch/xtensa/include/uapi/asm/ioctls.h19
-rw-r--r--arch/xtensa/include/uapi/asm/unistd.h5
-rw-r--r--arch/xtensa/kernel/align.S128
-rw-r--r--arch/xtensa/kernel/entry.S54
-rw-r--r--arch/xtensa/kernel/pci-dma.c12
-rw-r--r--arch/xtensa/kernel/smp.c1
-rw-r--r--arch/xtensa/kernel/traps.c5
-rw-r--r--arch/xtensa/kernel/vectors.S8
-rw-r--r--arch/xtensa/kernel/vmlinux.lds.S4
-rw-r--r--arch/xtensa/mm/cache.c77
-rw-r--r--arch/xtensa/mm/highmem.c41
-rw-r--r--arch/xtensa/mm/misc.S116
-rw-r--r--arch/xtensa/mm/mmu.c38
-rw-r--r--block/bio-integrity.c2
-rw-r--r--block/blk-core.c1
-rw-r--r--block/blk-mq.c36
-rw-r--r--block/cfq-iosched.c19
-rw-r--r--block/scsi_ioctl.c40
-rw-r--r--crypto/asymmetric_keys/public_key.c1
-rw-r--r--crypto/asymmetric_keys/verify_pefile.c49
-rw-r--r--drivers/acpi/acpi_lpss.c17
-rw-r--r--drivers/acpi/acpica/nsprepkg.c39
-rw-r--r--drivers/acpi/ec.c25
-rw-r--r--drivers/acpi/pci_irq.c4
-rw-r--r--drivers/acpi/processor_idle.c4
-rw-r--r--drivers/acpi/scan.c32
-rw-r--r--drivers/acpi/video.c45
-rw-r--r--drivers/ata/ahci.c22
-rw-r--r--drivers/ata/ahci_tegra.c14
-rw-r--r--drivers/ata/ahci_xgene.c61
-rw-r--r--drivers/ata/ata_piix.c8
-rw-r--r--drivers/ata/pata_jmicron.c12
-rw-r--r--drivers/base/regmap/internal.h3
-rw-r--r--drivers/base/regmap/regcache-rbtree.c9
-rw-r--r--drivers/base/regmap/regcache.c2
-rw-r--r--drivers/base/regmap/regmap-debugfs.c3
-rw-r--r--drivers/base/regmap/regmap.c2
-rw-r--r--drivers/block/brd.c6
-rw-r--r--drivers/block/xsysace.c1
-rw-r--r--drivers/block/zram/zram_drv.c10
-rw-r--r--drivers/block/zram/zram_drv.h2
-rw-r--r--drivers/bus/arm-ccn.c53
-rw-r--r--drivers/cpufreq/intel_pstate.c7
-rw-r--r--drivers/cpufreq/s5pv210-cpufreq.c2
-rw-r--r--drivers/cpuidle/cpuidle-big_little.c13
-rw-r--r--drivers/dma-buf/fence.c2
-rw-r--r--drivers/firmware/efi/vars.c8
-rw-r--r--drivers/gpio/devres.c2
-rw-r--r--drivers/gpio/gpio-bt8xx.c3
-rw-r--r--drivers/gpio/gpio-lynxpoint.c18
-rw-r--r--drivers/gpio/gpio-zynq.c36
-rw-r--r--drivers/gpio/gpiolib-of.c4
-rw-r--r--drivers/gpu/drm/ast/ast_tables.h1
-rw-r--r--drivers/gpu/drm/drm_crtc.c3
-rw-r--r--drivers/gpu/drm/i915/i915_drv.c33
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h3
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c33
-rw-r--r--drivers/gpu/drm/i915/intel_bios.c2
-rw-r--r--drivers/gpu/drm/i915/intel_crt.c9
-rw-r--r--drivers/gpu/drm/i915/intel_display.c73
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c88
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h9
-rw-r--r--drivers/gpu/drm/i915/intel_lvds.c2
-rw-r--r--drivers/gpu/drm/i915/intel_panel.c8
-rw-r--r--drivers/gpu/drm/i915/intel_tv.c17
-rw-r--r--drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c2
-rw-r--r--drivers/gpu/drm/msm/msm_drv.c3
-rw-r--r--drivers/gpu/drm/msm/msm_fbdev.c2
-rw-r--r--drivers/gpu/drm/msm/msm_iommu.c4
-rw-r--r--drivers/gpu/drm/nouveau/core/core/parent.c4
-rw-r--r--drivers/gpu/drm/radeon/Makefile2
-rw-r--r--drivers/gpu/drm/radeon/ci_dpm.c3
-rw-r--r--drivers/gpu/drm/radeon/cik.c69
-rw-r--r--drivers/gpu/drm/radeon/cik_sdma.c6
-rw-r--r--drivers/gpu/drm/radeon/evergreen.c4
-rw-r--r--drivers/gpu/drm/radeon/evergreen_dma.c2
-rw-r--r--drivers/gpu/drm/radeon/kv_dpm.c11
-rw-r--r--drivers/gpu/drm/radeon/ni.c13
-rw-r--r--drivers/gpu/drm/radeon/r100.c8
-rw-r--r--drivers/gpu/drm/radeon/r200.c2
-rw-r--r--drivers/gpu/drm/radeon/r300.c2
-rw-r--r--drivers/gpu/drm/radeon/r420.c4
-rw-r--r--drivers/gpu/drm/radeon/r600.c52
-rw-r--r--drivers/gpu/drm/radeon/r600_dma.c6
-rw-r--r--drivers/gpu/drm/radeon/r600d.h1
-rw-r--r--drivers/gpu/drm/radeon/radeon.h11
-rw-r--r--drivers/gpu/drm/radeon/radeon_cs.c9
-rw-r--r--drivers/gpu/drm/radeon/radeon_device.c34
-rw-r--r--drivers/gpu/drm/radeon/radeon_drv.c4
-rw-r--r--drivers/gpu/drm/radeon/radeon_ib.c5
-rw-r--r--drivers/gpu/drm/radeon/radeon_pm.c16
-rw-r--r--drivers/gpu/drm/radeon/radeon_ring.c20
-rw-r--r--drivers/gpu/drm/radeon/radeon_semaphore.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_test.c18
-rw-r--r--drivers/gpu/drm/radeon/radeon_uvd.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_vce.c6
-rw-r--r--drivers/gpu/drm/radeon/radeon_vm.c10
-rw-r--r--drivers/gpu/drm/radeon/rv515.c2
-rw-r--r--drivers/gpu/drm/radeon/rv770.c23
-rw-r--r--drivers/gpu/drm/radeon/rv770_dma.c2
-rw-r--r--drivers/gpu/drm/radeon/si.c40
-rw-r--r--drivers/gpu/drm/radeon/si_dma.c2
-rw-r--r--drivers/gpu/drm/radeon/trinity_dpm.c24
-rw-r--r--drivers/gpu/drm/radeon/uvd_v1_0.c4
-rw-r--r--drivers/gpu/drm/sti/Kconfig1
-rw-r--r--drivers/gpu/drm/sti/sti_drm_drv.c4
-rw-r--r--drivers/gpu/drm/sti/sti_hda.c10
-rw-r--r--drivers/gpu/drm/sti/sti_hdmi.c10
-rw-r--r--drivers/gpu/drm/sti/sti_tvout.c6
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c11
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c3
-rw-r--r--drivers/hid/hid-logitech-dj.c43
-rw-r--r--drivers/hid/hid-logitech-dj.h1
-rw-r--r--drivers/hid/hid-magicmouse.c10
-rw-r--r--drivers/hid/hid-picolcd_core.c6
-rw-r--r--drivers/hwmon/ds1621.c1
-rw-r--r--drivers/i2c/busses/i2c-at91.c32
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c3
-rw-r--r--drivers/i2c/busses/i2c-rcar.c37
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c4
-rw-r--r--drivers/infiniband/hw/mlx4/main.c30
-rw-r--r--drivers/infiniband/hw/mlx4/qp.c8
-rw-r--r--drivers/input/input-mt.c30
-rw-r--r--drivers/input/mouse/alps.c4
-rw-r--r--drivers/input/mouse/elantech.c137
-rw-r--r--drivers/input/mouse/elantech.h3
-rw-r--r--drivers/input/serio/i8042-sparcio.h3
-rw-r--r--drivers/isdn/gigaset/bas-gigaset.c2
-rw-r--r--drivers/isdn/gigaset/usb-gigaset.c2
-rw-r--r--drivers/isdn/mISDN/dsp_cmx.c109
-rw-r--r--drivers/leds/led-class.c14
-rw-r--r--drivers/leds/led-core.c11
-rw-r--r--drivers/md/dm-crypt.c25
-rw-r--r--drivers/mfd/ab8500-core.c2
-rw-r--r--drivers/mfd/htc-i2cpld.c2
-rw-r--r--drivers/mfd/omap-usb-host.c2
-rw-r--r--drivers/mfd/twl4030-power.c20
-rw-r--r--drivers/misc/mei/client.c1
-rw-r--r--drivers/misc/mei/nfc.c11
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c4
-rw-r--r--drivers/mtd/nand/omap2.c16
-rw-r--r--drivers/net/bonding/bond_alb.c2
-rw-r--r--drivers/net/bonding/bond_netlink.c34
-rw-r--r--drivers/net/bonding/bond_options.c2
-rw-r--r--drivers/net/can/Kconfig2
-rw-r--r--drivers/net/can/Makefile3
-rw-r--r--drivers/net/can/c_can/Makefile2
-rw-r--r--drivers/net/can/cc770/Makefile2
-rw-r--r--drivers/net/can/dev.c3
-rw-r--r--drivers/net/can/flexcan.c111
-rw-r--r--drivers/net/can/m_can/Kconfig4
-rw-r--r--drivers/net/can/m_can/Makefile5
-rw-r--r--drivers/net/can/m_can/m_can.c1202
-rw-r--r--drivers/net/can/mscan/Makefile2
-rw-r--r--drivers/net/can/rcar_can.c66
-rw-r--r--drivers/net/can/sja1000/Makefile2
-rw-r--r--drivers/net/can/softing/Makefile2
-rw-r--r--drivers/net/can/spi/Makefile2
-rw-r--r--drivers/net/can/spi/mcp251x.c16
-rw-r--r--drivers/net/can/usb/Makefile2
-rw-r--r--drivers/net/dsa/Kconfig11
-rw-r--r--drivers/net/dsa/Makefile1
-rw-r--r--drivers/net/dsa/bcm_sf2.c626
-rw-r--r--drivers/net/dsa/bcm_sf2.h140
-rw-r--r--drivers/net/dsa/bcm_sf2_regs.h227
-rw-r--r--drivers/net/ethernet/3com/3c59x.c8
-rw-r--r--drivers/net/ethernet/aeroflex/greth.c86
-rw-r--r--drivers/net/ethernet/aeroflex/greth.h2
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-common.h11
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-dcb.c1
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-debugfs.c9
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-desc.c6
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-dev.c210
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-drv.c3
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c9
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-main.c3
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-mdio.c1
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-ptp.c1
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe.h6
-rw-r--r--drivers/net/ethernet/apm/xgene/Kconfig1
-rw-r--r--drivers/net/ethernet/arc/Kconfig8
-rw-r--r--drivers/net/ethernet/arc/Makefile3
-rw-r--r--drivers/net/ethernet/arc/emac.h6
-rw-r--r--drivers/net/ethernet/arc/emac_arc.c95
-rw-r--r--drivers/net/ethernet/arc/emac_main.c127
-rw-r--r--drivers/net/ethernet/arc/emac_mdio.c7
-rw-r--r--drivers/net/ethernet/broadcom/Kconfig3
-rw-r--r--drivers/net/ethernet/broadcom/bcmsysport.c18
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x.h40
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c128
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h5
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c5
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h14
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c42
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h222
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h236
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c74
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h5
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c901
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h178
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c130
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h62
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c48
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h3
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c10
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c9
-rw-r--r--drivers/net/ethernet/broadcom/cnic.c10
-rw-r--r--drivers/net/ethernet/broadcom/tg3.c16
-rw-r--r--drivers/net/ethernet/broadcom/tg3.h1
-rw-r--r--drivers/net/ethernet/brocade/bna/bnad.c7
-rw-r--r--drivers/net/ethernet/calxeda/Kconfig1
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c16
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.c79
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_regs.h2
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h4
-rw-r--r--drivers/net/ethernet/cisco/enic/enic.h1
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_ethtool.c39
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_main.c50
-rw-r--r--drivers/net/ethernet/dec/tulip/dmfe.c152
-rw-r--r--drivers/net/ethernet/ec_bhf.c101
-rw-r--r--drivers/net/ethernet/emulex/benet/be.h28
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.c14
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.h2
-rw-r--r--drivers/net/ethernet/emulex/benet/be_ethtool.c35
-rw-r--r--drivers/net/ethernet/emulex/benet/be_hw.h12
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c289
-rw-r--r--drivers/net/ethernet/hp/hp100.c4
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_main.c2
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_ethtool.c155
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_main.c19
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c21
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e.h9
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_adminq.c8
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_common.c10
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_debugfs.c3
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_ethtool.c70
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c259
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_prototype.h6
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_txrx.c92
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_txrx.h1
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c50
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h2
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_adminq.c9
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_common.c8
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_prototype.h6
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_txrx.c10
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_txrx.h1
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40evf_main.c2
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.c31
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.h4
-rw-r--r--drivers/net/ethernet/intel/igb/igb_ethtool.c24
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c204
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c8
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c278
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c14
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_type.h7
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/vf.c15
-rw-r--r--drivers/net/ethernet/marvell/mvneta.c8
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_netdev.c31
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_rx.c19
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_tx.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mcg.c38
-rw-r--r--drivers/net/ethernet/moxa/moxart_ether.c34
-rw-r--r--drivers/net/ethernet/nvidia/forcedeth.c2
-rw-r--r--drivers/net/ethernet/nxp/lpc_eth.c3
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic.h8
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c218
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h2
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c156
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c2
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c6
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c2
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c10
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_main.c5
-rw-r--r--drivers/net/ethernet/realtek/r8169.c472
-rw-r--r--drivers/net/ethernet/renesas/Kconfig1
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/chain_mode.c14
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/common.h13
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c62
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000.h2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c6
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/mmc.h2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/mmc_core.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/ring_mode.c15
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac.h9
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c20
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c144
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c1
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h2
-rw-r--r--drivers/net/ethernet/sun/sungem.c34
-rw-r--r--drivers/net/ethernet/ti/cpsw.c59
-rw-r--r--drivers/net/fddi/skfp/h/skfbi.h5
-rw-r--r--drivers/net/hyperv/hyperv_net.h4
-rw-r--r--drivers/net/hyperv/netvsc.c22
-rw-r--r--drivers/net/phy/Kconfig10
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/amd-xgbe-phy.c168
-rw-r--r--drivers/net/phy/bcm7xxx.c116
-rw-r--r--drivers/net/phy/broadcom.c122
-rw-r--r--drivers/net/phy/dp83640.c35
-rw-r--r--drivers/net/phy/fixed.c11
-rw-r--r--drivers/net/phy/mdio-bcm-unimac.c213
-rw-r--r--drivers/net/phy/mdio_bus.c8
-rw-r--r--drivers/net/phy/phy.c30
-rw-r--r--drivers/net/phy/phy_device.c4
-rw-r--r--drivers/net/sungem_phy.c304
-rw-r--r--drivers/net/team/team.c44
-rw-r--r--drivers/net/usb/r8152.c151
-rw-r--r--drivers/net/virtio_net.c4
-rw-r--r--drivers/net/vmxnet3/vmxnet3_drv.c15
-rw-r--r--drivers/net/vmxnet3/vmxnet3_int.h4
-rw-r--r--drivers/net/vxlan.c12
-rw-r--r--drivers/net/wan/dlci.c6
-rw-r--r--drivers/net/xen-netback/interface.c6
-rw-r--r--drivers/pci/host/Kconfig2
-rw-r--r--drivers/pinctrl/nomadik/pinctrl-abx500.c3
-rw-r--r--drivers/pinctrl/pinctrl-at91.c4
-rw-r--r--drivers/pinctrl/pinctrl-rockchip.c15
-rw-r--r--drivers/pinctrl/pinctrl-tegra-xusb.c5
-rw-r--r--drivers/pinctrl/samsung/pinctrl-exynos.c69
-rw-r--r--drivers/pinctrl/samsung/pinctrl-samsung.h1
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-r8a7791.c8
-rw-r--r--drivers/platform/x86/ideapad-laptop.c31
-rw-r--r--drivers/platform/x86/toshiba_acpi.c27
-rw-r--r--drivers/powercap/intel_rapl.c8
-rw-r--r--drivers/pwm/core.c8
-rw-r--r--drivers/rtc/rtc-s5m.c21
-rw-r--r--drivers/s390/char/con3215.c20
-rw-r--r--drivers/s390/char/sclp_tty.c2
-rw-r--r--drivers/s390/net/qeth_core.h1
-rw-r--r--drivers/s390/net/qeth_core_main.c16
-rw-r--r--drivers/s390/net/qeth_l2_sys.c7
-rw-r--r--drivers/scsi/scsi_lib.c1
-rw-r--r--drivers/sh/Makefile3
-rw-r--r--drivers/sh/intc/Kconfig6
-rw-r--r--drivers/spi/spi-au1550.c2
-rw-r--r--drivers/spi/spi-davinci.c16
-rw-r--r--drivers/spi/spi-dw-pci.c2
-rw-r--r--drivers/spi/spi-dw.c2
-rw-r--r--drivers/spi/spi-omap2-mcspi.c3
-rw-r--r--drivers/spi/spi-pxa2xx.c1
-rw-r--r--drivers/spi/spi-rockchip.c4
-rw-r--r--drivers/spi/spi-rspi.c94
-rw-r--r--drivers/spi/spi-sh-msiof.c71
-rw-r--r--drivers/spi/spi.c1
-rw-r--r--drivers/staging/Kconfig2
-rw-r--r--drivers/staging/Makefile1
-rw-r--r--drivers/staging/android/logger.c5
-rw-r--r--drivers/staging/et131x/et131x.c68
-rw-r--r--drivers/staging/lustre/lustre/libcfs/workitem.c1
-rw-r--r--drivers/staging/lustre/lustre/obdclass/class_obd.c2
-rw-r--r--drivers/staging/rtl8188eu/os_dep/usb_intf.c2
-rw-r--r--drivers/thunderbolt/path.c21
-rw-r--r--drivers/usb/Kconfig2
-rw-r--r--drivers/usb/Makefile2
-rw-r--r--drivers/usb/core/hub.c16
-rw-r--r--drivers/usb/dwc2/gadget.c2
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c2
-rw-r--r--drivers/usb/gadget/Makefile2
-rw-r--r--drivers/usb/gadget/function/Makefile4
-rw-r--r--drivers/usb/gadget/function/f_ncm.c8
-rw-r--r--drivers/usb/gadget/function/u_ether.c3
-rw-r--r--drivers/usb/gadget/function/uvc_video.c3
-rw-r--r--drivers/usb/gadget/legacy/Makefile6
-rw-r--r--drivers/usb/gadget/legacy/dbgp.c2
-rw-r--r--drivers/usb/gadget/legacy/inode.c2
-rw-r--r--drivers/usb/gadget/udc/Kconfig3
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.c2
-rw-r--r--drivers/usb/gadget/udc/fusb300_udc.c8
-rw-r--r--drivers/usb/gadget/udc/pch_udc.c22
-rw-r--r--drivers/usb/gadget/udc/r8a66597-udc.c4
-rw-r--r--drivers/usb/host/ehci-hub.c2
-rw-r--r--drivers/usb/host/xhci-pci.c9
-rw-r--r--drivers/usb/host/xhci-ring.c104
-rw-r--r--drivers/usb/host/xhci.c3
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c1
-rw-r--r--drivers/usb/musb/ux500_dma.c2
-rw-r--r--drivers/usb/phy/phy-gpio-vbus-usb.c4
-rw-r--r--drivers/usb/phy/phy-msm-usb.c4
-rw-r--r--drivers/usb/phy/phy-samsung-usb.h2
-rw-r--r--drivers/usb/phy/phy.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.c3
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h7
-rw-r--r--drivers/usb/serial/option.c31
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/serial/usb-serial.c37
-rw-r--r--drivers/usb/serial/whiteheat.c7
-rw-r--r--drivers/usb/serial/zte_ev.c20
-rw-r--r--drivers/usb/storage/unusual_devs.h6
-rw-r--r--drivers/usb/usbip/Kconfig (renamed from drivers/staging/usbip/Kconfig)0
-rw-r--r--drivers/usb/usbip/Makefile (renamed from drivers/staging/usbip/Makefile)0
-rw-r--r--drivers/usb/usbip/README (renamed from drivers/staging/usbip/README)0
-rw-r--r--drivers/usb/usbip/stub.h (renamed from drivers/staging/usbip/stub.h)0
-rw-r--r--drivers/usb/usbip/stub_dev.c (renamed from drivers/staging/usbip/stub_dev.c)27
-rw-r--r--drivers/usb/usbip/stub_main.c (renamed from drivers/staging/usbip/stub_main.c)0
-rw-r--r--drivers/usb/usbip/stub_rx.c (renamed from drivers/staging/usbip/stub_rx.c)0
-rw-r--r--drivers/usb/usbip/stub_tx.c (renamed from drivers/staging/usbip/stub_tx.c)0
-rw-r--r--drivers/usb/usbip/usbip_common.c (renamed from drivers/staging/usbip/usbip_common.c)0
-rw-r--r--drivers/usb/usbip/usbip_common.h (renamed from drivers/staging/usbip/usbip_common.h)2
-rw-r--r--drivers/usb/usbip/usbip_event.c (renamed from drivers/staging/usbip/usbip_event.c)0
-rw-r--r--drivers/usb/usbip/usbip_protocol.txt (renamed from drivers/staging/usbip/usbip_protocol.txt)0
-rw-r--r--drivers/usb/usbip/vhci.h (renamed from drivers/staging/usbip/vhci.h)0
-rw-r--r--drivers/usb/usbip/vhci_hcd.c (renamed from drivers/staging/usbip/vhci_hcd.c)0
-rw-r--r--drivers/usb/usbip/vhci_rx.c (renamed from drivers/staging/usbip/vhci_rx.c)0
-rw-r--r--drivers/usb/usbip/vhci_sysfs.c (renamed from drivers/staging/usbip/vhci_sysfs.c)0
-rw-r--r--drivers/usb/usbip/vhci_tx.c (renamed from drivers/staging/usbip/vhci_tx.c)0
-rw-r--r--drivers/usb/wusbcore/wa-xfer.c3
-rw-r--r--drivers/video/backlight/pwm_bl.c1
-rw-r--r--drivers/video/fbdev/amba-clcd.c23
-rw-r--r--drivers/video/fbdev/atmel_lcdfb.c2
-rw-r--r--drivers/video/fbdev/chipsfb.c2
-rw-r--r--drivers/video/fbdev/da8xx-fb.c2
-rw-r--r--drivers/video/of_display_timing.c1
-rw-r--r--fs/aio.c90
-rw-r--r--fs/btrfs/async-thread.c44
-rw-r--r--fs/btrfs/async-thread.h28
-rw-r--r--fs/btrfs/delayed-inode.c4
-rw-r--r--fs/btrfs/disk-io.c56
-rw-r--r--fs/btrfs/extent-tree.c23
-rw-r--r--fs/btrfs/extent_io.c5
-rw-r--r--fs/btrfs/file.c17
-rw-r--r--fs/btrfs/inode.c109
-rw-r--r--fs/btrfs/ioctl.c36
-rw-r--r--fs/btrfs/ordered-data.c1
-rw-r--r--fs/btrfs/qgroup.c3
-rw-r--r--fs/btrfs/raid56.c9
-rw-r--r--fs/btrfs/reada.c3
-rw-r--r--fs/btrfs/scrub.c25
-rw-r--r--fs/btrfs/sysfs.c2
-rw-r--r--fs/btrfs/tree-log.c17
-rw-r--r--fs/btrfs/volumes.c65
-rw-r--r--fs/ext4/ext4.h18
-rw-r--r--fs/ext4/extents.c88
-rw-r--r--fs/ext4/inode.c44
-rw-r--r--fs/ext4/mballoc.c5
-rw-r--r--fs/ext4/namei.c56
-rw-r--r--fs/ext4/super.c5
-rw-r--r--fs/f2fs/Kconfig4
-rw-r--r--fs/f2fs/checkpoint.c80
-rw-r--r--fs/f2fs/data.c19
-rw-r--r--fs/f2fs/debug.c4
-rw-r--r--fs/f2fs/dir.c6
-rw-r--r--fs/f2fs/f2fs.h26
-rw-r--r--fs/f2fs/file.c60
-rw-r--r--fs/f2fs/gc.c8
-rw-r--r--fs/f2fs/gc.h2
-rw-r--r--fs/f2fs/hash.c7
-rw-r--r--fs/f2fs/inline.c38
-rw-r--r--fs/f2fs/namei.c23
-rw-r--r--fs/f2fs/node.c80
-rw-r--r--fs/f2fs/recovery.c30
-rw-r--r--fs/f2fs/segment.c53
-rw-r--r--fs/f2fs/segment.h2
-rw-r--r--fs/f2fs/super.c32
-rw-r--r--fs/f2fs/xattr.c2
-rw-r--r--fs/jbd2/commit.c21
-rw-r--r--fs/jbd2/journal.c56
-rw-r--r--fs/jbd2/recovery.c33
-rw-r--r--fs/jbd2/revoke.c6
-rw-r--r--fs/locks.c2
-rw-r--r--fs/namespace.c10
-rw-r--r--fs/nfs/nfs3acl.c5
-rw-r--r--fs/nfs/nfs4proc.c26
-rw-r--r--fs/nfs/pagelist.c84
-rw-r--r--fs/nfs/write.c21
-rw-r--r--fs/ocfs2/cluster/quorum.c13
-rw-r--r--fs/ocfs2/cluster/tcp.c45
-rw-r--r--fs/ocfs2/cluster/tcp.h1
-rw-r--r--fs/ocfs2/ioctl.c129
-rw-r--r--fs/pnode.c1
-rw-r--r--fs/sync.c2
-rw-r--r--fs/ufs/inode.c7
-rw-r--r--fs/ufs/namei.c14
-rw-r--r--fs/xfs/libxfs/xfs_bmap.c18
-rw-r--r--fs/xfs/xfs_aops.c61
-rw-r--r--fs/xfs/xfs_bmap_util.c20
-rw-r--r--fs/xfs/xfs_file.c27
-rw-r--r--include/acpi/acpi_bus.h1
-rw-r--r--include/drm/drm_pciids.h7
-rw-r--r--include/linux/blk-mq.h7
-rw-r--r--include/linux/brcmphy.h132
-rw-r--r--include/linux/cycx_x25.h125
-rw-r--r--include/linux/etherdevice.h1
-rw-r--r--include/linux/ethtool.h4
-rw-r--r--include/linux/f2fs_fs.h16
-rw-r--r--include/linux/filter.h49
-rw-r--r--include/linux/ftrace.h14
-rw-r--r--include/linux/gpio/consumer.h109
-rw-r--r--include/linux/i82593.h229
-rw-r--r--include/linux/igmp.h1
-rw-r--r--include/linux/jbd2.h30
-rw-r--r--include/linux/leds.h3
-rw-r--r--include/linux/mlx4/device.h6
-rw-r--r--include/linux/mtd/nand.h2
-rw-r--r--include/linux/netdevice.h159
-rw-r--r--include/linux/netfilter.h5
-rw-r--r--include/linux/nfs_page.h1
-rw-r--r--include/linux/phonedev.h25
-rw-r--r--include/linux/phy.h27
-rw-r--r--include/linux/phy_fixed.h17
-rw-r--r--include/linux/platform_data/mtd-nand-omap2.h13
-rw-r--r--include/linux/pm_domain.h2
-rw-r--r--include/linux/random.h4
-rw-r--r--include/linux/regulator/driver.h2
-rw-r--r--include/linux/regulator/machine.h1
-rw-r--r--include/linux/rhashtable.h2
-rw-r--r--include/linux/seqno-fence.h1
-rw-r--r--include/linux/skbuff.h143
-rw-r--r--include/linux/spi/spi.h7
-rw-r--r--include/linux/tcp.h2
-rw-r--r--include/linux/tick.h7
-rw-r--r--include/linux/udp.h16
-rw-r--r--include/net/codel.h2
-rw-r--r--include/net/dsa.h43
-rw-r--r--include/net/flow_keys.h16
-rw-r--r--include/net/inetpeer.h1
-rw-r--r--include/net/ip.h8
-rw-r--r--include/net/ip6_checksum.h8
-rw-r--r--include/net/ip_fib.h5
-rw-r--r--include/net/ipv6.h1
-rw-r--r--include/net/pkt_sched.h2
-rw-r--r--include/net/sctp/sctp.h13
-rw-r--r--include/net/sock.h10
-rw-r--r--include/net/tcp.h8
-rw-r--r--include/net/udp.h18
-rw-r--r--include/net/wimax.h2
-rw-r--r--include/rxrpc/types.h41
-rw-r--r--include/sound/soc.h2
-rw-r--r--include/trace/events/irq.h4
-rw-r--r--include/uapi/drm/radeon_drm.h1
-rw-r--r--include/uapi/linux/ethtool.h28
-rw-r--r--include/uapi/linux/if_ether.h1
-rw-r--r--include/uapi/linux/usbip.h (renamed from drivers/staging/usbip/uapi/usbip.h)0
-rw-r--r--include/uapi/linux/xattr.h2
-rw-r--r--kernel/bpf/core.c80
-rw-r--r--kernel/cgroup.c47
-rw-r--r--kernel/compat.c24
-rw-r--r--kernel/crash_dump.c1
-rw-r--r--kernel/events/core.c23
-rw-r--r--kernel/irq/chip.c1
-rw-r--r--kernel/kexec.c11
-rw-r--r--kernel/kprobes.c13
-rw-r--r--kernel/power/power.h1
-rw-r--r--kernel/power/suspend.c2
-rw-r--r--kernel/power/suspend_test.c31
-rw-r--r--kernel/rcu/tree.h2
-rw-r--r--kernel/rcu/tree_plugin.h22
-rw-r--r--kernel/resource.c11
-rw-r--r--kernel/seccomp.c7
-rw-r--r--kernel/time/tick-sched.c14
-rw-r--r--kernel/time/timekeeping.c5
-rw-r--r--kernel/trace/ftrace.c246
-rw-r--r--kernel/trace/ring_buffer.c16
-rw-r--r--lib/Kconfig.debug11
-rw-r--r--lib/assoc_array.c2
-rw-r--r--lib/random32.c39
-rw-r--r--lib/rhashtable.c12
-rw-r--r--lib/test_bpf.c40
-rw-r--r--mm/hugetlb_cgroup.c2
-rw-r--r--mm/memblock.c3
-rw-r--r--mm/memcontrol.c103
-rw-r--r--mm/memory.c7
-rw-r--r--mm/percpu-vm.c22
-rw-r--r--mm/percpu.c2
-rw-r--r--mm/pgtable-generic.c2
-rw-r--r--mm/zbud.c1
-rw-r--r--mm/zpool.c2
-rw-r--r--mm/zsmalloc.c1
-rw-r--r--net/atm/mpc.c2
-rw-r--r--net/bridge/br_multicast.c2
-rw-r--r--net/core/datagram.c2
-rw-r--r--net/core/dev.c372
-rw-r--r--net/core/dev_ioctl.c7
-rw-r--r--net/core/ethtool.c81
-rw-r--r--net/core/filter.c8
-rw-r--r--net/core/flow_dissector.c115
-rw-r--r--net/core/gen_estimator.c2
-rw-r--r--net/core/gen_stats.c2
-rw-r--r--net/core/netpoll.c7
-rw-r--r--net/core/pktgen.c28
-rw-r--r--net/core/rtnetlink.c66
-rw-r--r--net/core/secure_seq.c6
-rw-r--r--net/core/skbuff.c103
-rw-r--r--net/core/sock.c66
-rw-r--r--net/core/timestamping.c43
-rw-r--r--net/decnet/af_decnet.c3
-rw-r--r--net/decnet/dn_dev.c3
-rw-r--r--net/decnet/dn_timer.c3
-rw-r--r--net/dsa/Kconfig3
-rw-r--r--net/dsa/Makefile1
-rw-r--r--net/dsa/dsa.c48
-rw-r--r--net/dsa/dsa_priv.h16
-rw-r--r--net/dsa/slave.c165
-rw-r--r--net/dsa/tag_brcm.c173
-rw-r--r--net/dsa/tag_dsa.c8
-rw-r--r--net/dsa/tag_edsa.c8
-rw-r--r--net/dsa/tag_trailer.c8
-rw-r--r--net/ethernet/eth.c34
-rw-r--r--net/ipv4/fib_frontend.c14
-rw-r--r--net/ipv4/fib_semantics.c8
-rw-r--r--net/ipv4/gre_demux.c9
-rw-r--r--net/ipv4/gre_offload.c44
-rw-r--r--net/ipv4/igmp.c33
-rw-r--r--net/ipv4/inet_hashtables.c2
-rw-r--r--net/ipv4/inetpeer.c21
-rw-r--r--net/ipv4/ip_sockglue.c15
-rw-r--r--net/ipv4/ipconfig.c3
-rw-r--r--net/ipv4/netfilter/Kconfig102
-rw-r--r--net/ipv4/netfilter/Makefile2
-rw-r--r--net/ipv4/netfilter/ipt_CLUSTERIP.c2
-rw-r--r--net/ipv4/route.c14
-rw-r--r--net/ipv4/syncookies.c2
-rw-r--r--net/ipv4/sysctl_net_ipv4.c10
-rw-r--r--net/ipv4/tcp_bic.c11
-rw-r--r--net/ipv4/tcp_cong.c5
-rw-r--r--net/ipv4/tcp_cubic.c18
-rw-r--r--net/ipv4/tcp_diag.c5
-rw-r--r--net/ipv4/tcp_highspeed.c145
-rw-r--r--net/ipv4/tcp_htcp.c6
-rw-r--r--net/ipv4/tcp_hybla.c1
-rw-r--r--net/ipv4/tcp_illinois.c3
-rw-r--r--net/ipv4/tcp_input.c31
-rw-r--r--net/ipv4/tcp_ipv4.c12
-rw-r--r--net/ipv4/tcp_minisocks.c2
-rw-r--r--net/ipv4/tcp_offload.c27
-rw-r--r--net/ipv4/tcp_output.c42
-rw-r--r--net/ipv4/tcp_probe.c6
-rw-r--r--net/ipv4/tcp_scalable.c2
-rw-r--r--net/ipv4/tcp_timer.c7
-rw-r--r--net/ipv4/tcp_vegas.c3
-rw-r--r--net/ipv4/tcp_veno.c1
-rw-r--r--net/ipv4/tcp_westwood.c7
-rw-r--r--net/ipv4/tcp_yeah.c9
-rw-r--r--net/ipv4/udp.c13
-rw-r--r--net/ipv4/udp_offload.c71
-rw-r--r--net/ipv6/addrconf.c41
-rw-r--r--net/ipv6/af_inet6.c12
-rw-r--r--net/ipv6/ah6.c21
-rw-r--r--net/ipv6/anycast.c10
-rw-r--r--net/ipv6/datagram.c23
-rw-r--r--net/ipv6/esp6.c15
-rw-r--r--net/ipv6/exthdrs.c2
-rw-r--r--net/ipv6/icmp.c10
-rw-r--r--net/ipv6/inet6_connection_sock.c6
-rw-r--r--net/ipv6/inet6_hashtables.c7
-rw-r--r--net/ipv6/ip6_flowlabel.c19
-rw-r--r--net/ipv6/ip6_icmp.c2
-rw-r--r--net/ipv6/ip6_input.c6
-rw-r--r--net/ipv6/ip6_offload.c2
-rw-r--r--net/ipv6/ip6_output.c21
-rw-r--r--net/ipv6/ip6_tunnel.c32
-rw-r--r--net/ipv6/ip6mr.c4
-rw-r--r--net/ipv6/ipcomp6.c6
-rw-r--r--net/ipv6/ipv6_sockglue.c26
-rw-r--r--net/ipv6/mcast.c139
-rw-r--r--net/ipv6/mip6.c10
-rw-r--r--net/ipv6/ndisc.c17
-rw-r--r--net/ipv6/netfilter/Kconfig28
-rw-r--r--net/ipv6/netfilter/Makefile2
-rw-r--r--net/ipv6/output_core.c2
-rw-r--r--net/ipv6/proc.c2
-rw-r--r--net/ipv6/raw.c8
-rw-r--r--net/ipv6/reassembly.c12
-rw-r--r--net/ipv6/route.c22
-rw-r--r--net/ipv6/sit.c12
-rw-r--r--net/ipv6/syncookies.c2
-rw-r--r--net/ipv6/sysctl_net_ipv6.c10
-rw-r--r--net/ipv6/tcp_ipv6.c4
-rw-r--r--net/ipv6/tcpv6_offload.c26
-rw-r--r--net/ipv6/tunnel6.c4
-rw-r--r--net/ipv6/udp.c26
-rw-r--r--net/ipv6/udp_offload.c43
-rw-r--r--net/ipv6/xfrm6_input.c6
-rw-r--r--net/ipv6/xfrm6_output.c1
-rw-r--r--net/ipv6/xfrm6_policy.c22
-rw-r--r--net/ipv6/xfrm6_state.c14
-rw-r--r--net/ipv6/xfrm6_tunnel.c4
-rw-r--r--net/l2tp/l2tp_core.c4
-rw-r--r--net/l2tp/l2tp_ppp.c3
-rw-r--r--net/netfilter/Kconfig14
-rw-r--r--net/netfilter/Makefile2
-rw-r--r--net/netfilter/core.c6
-rw-r--r--net/netfilter/ipvs/ip_vs_core.c2
-rw-r--r--net/netfilter/ipvs/ip_vs_xmit.c20
-rw-r--r--net/netfilter/nf_conntrack_core.c4
-rw-r--r--net/netfilter/nf_conntrack_expect.c3
-rw-r--r--net/netfilter/nf_conntrack_netlink.c2
-rw-r--r--net/netfilter/nf_conntrack_standalone.c2
-rw-r--r--net/netfilter/nf_nat_core.c5
-rw-r--r--net/netfilter/xt_HMARK.c2
-rw-r--r--net/netfilter/xt_cgroup.c2
-rw-r--r--net/netfilter/xt_cluster.c3
-rw-r--r--net/netfilter/xt_hashlimit.c2
-rw-r--r--net/openvswitch/datapath.c11
-rw-r--r--net/openvswitch/flow.c2
-rw-r--r--net/packet/af_packet.c12
-rw-r--r--net/rose/rose_link.c3
-rw-r--r--net/rxrpc/ar-error.c14
-rw-r--r--net/rxrpc/ar-input.c9
-rw-r--r--net/sched/act_police.c4
-rw-r--r--net/sched/sch_fq.c4
-rw-r--r--net/sched/sch_fq_codel.c3
-rw-r--r--net/sched/sch_generic.c25
-rw-r--r--net/sched/sch_htb.c6
-rw-r--r--net/sched/sch_tbf.c6
-rw-r--r--net/sched/sch_teql.c5
-rw-r--r--net/sctp/input.c8
-rw-r--r--net/sctp/socket.c2
-rw-r--r--net/socket.c5
-rw-r--r--net/tipc/Makefile2
-rw-r--r--net/tipc/bcast.c8
-rw-r--r--net/tipc/config.c4
-rw-r--r--net/tipc/core.c9
-rw-r--r--net/tipc/core.h6
-rw-r--r--net/tipc/link.c120
-rw-r--r--net/tipc/link.h7
-rw-r--r--net/tipc/msg.c38
-rw-r--r--net/tipc/msg.h5
-rw-r--r--net/tipc/name_distr.c139
-rw-r--r--net/tipc/name_distr.h1
-rw-r--r--net/tipc/name_table.c9
-rw-r--r--net/tipc/net.c3
-rw-r--r--net/tipc/node.c90
-rw-r--r--net/tipc/node.h7
-rw-r--r--net/tipc/port.c514
-rw-r--r--net/tipc/port.h190
-rw-r--r--net/tipc/ref.c266
-rw-r--r--net/tipc/ref.h48
-rw-r--r--net/tipc/socket.c884
-rw-r--r--net/tipc/socket.h55
-rw-r--r--net/tipc/subscr.c1
-rw-r--r--net/tipc/sysctl.c7
-rwxr-xr-xscripts/checkpatch.pl4
-rwxr-xr-xscripts/kernel-doc1
-rw-r--r--security/keys/key.c4
-rw-r--r--security/tomoyo/realpath.c5
-rw-r--r--sound/core/info.c4
-rw-r--r--sound/core/pcm_misc.c4
-rw-r--r--sound/firewire/amdtp.c11
-rw-r--r--sound/firewire/amdtp.h1
-rw-r--r--sound/firewire/dice.c29
-rw-r--r--sound/pci/ctxfi/ct20k1reg.h4
-rw-r--r--sound/pci/hda/ca0132_regs.h2
-rw-r--r--sound/pci/hda/patch_conexant.c9
-rw-r--r--sound/pci/hda/patch_realtek.c20
-rw-r--r--sound/soc/codecs/cs4265.c12
-rw-r--r--sound/soc/codecs/da732x.h2
-rw-r--r--sound/soc/codecs/rt5640.c1
-rw-r--r--sound/soc/codecs/rt5677.c8
-rw-r--r--sound/soc/generic/simple-card.c8
-rw-r--r--sound/soc/omap/omap-twl4030.c2
-rw-r--r--sound/soc/sh/rcar/gen.c2
-rw-r--r--sound/soc/soc-core.c2
-rw-r--r--sound/soc/tegra/tegra_asoc_utils.h2
-rw-r--r--tools/testing/selftests/ipc/Makefile6
-rw-r--r--tools/testing/selftests/kcmp/Makefile6
-rw-r--r--tools/testing/selftests/memfd/Makefile10
-rw-r--r--tools/usb/usbip/.gitignore (renamed from drivers/staging/usbip/userspace/.gitignore)0
-rw-r--r--tools/usb/usbip/AUTHORS (renamed from drivers/staging/usbip/userspace/AUTHORS)0
-rw-r--r--tools/usb/usbip/COPYING (renamed from drivers/staging/usbip/userspace/COPYING)0
-rw-r--r--tools/usb/usbip/INSTALL (renamed from drivers/staging/usbip/userspace/INSTALL)0
-rw-r--r--tools/usb/usbip/Makefile.am (renamed from drivers/staging/usbip/userspace/Makefile.am)0
-rw-r--r--tools/usb/usbip/README (renamed from drivers/staging/usbip/userspace/README)0
-rwxr-xr-xtools/usb/usbip/autogen.sh (renamed from drivers/staging/usbip/userspace/autogen.sh)0
-rwxr-xr-xtools/usb/usbip/cleanup.sh (renamed from drivers/staging/usbip/userspace/cleanup.sh)0
-rw-r--r--tools/usb/usbip/configure.ac (renamed from drivers/staging/usbip/userspace/configure.ac)0
-rw-r--r--tools/usb/usbip/doc/usbip.8 (renamed from drivers/staging/usbip/userspace/doc/usbip.8)0
-rw-r--r--tools/usb/usbip/doc/usbipd.8 (renamed from drivers/staging/usbip/userspace/doc/usbipd.8)0
-rw-r--r--tools/usb/usbip/libsrc/Makefile.am (renamed from drivers/staging/usbip/userspace/libsrc/Makefile.am)0
-rw-r--r--tools/usb/usbip/libsrc/list.h (renamed from drivers/staging/usbip/userspace/libsrc/list.h)0
-rw-r--r--tools/usb/usbip/libsrc/names.c (renamed from drivers/staging/usbip/userspace/libsrc/names.c)0
-rw-r--r--tools/usb/usbip/libsrc/names.h (renamed from drivers/staging/usbip/userspace/libsrc/names.h)0
-rw-r--r--tools/usb/usbip/libsrc/sysfs_utils.c (renamed from drivers/staging/usbip/userspace/libsrc/sysfs_utils.c)0
-rw-r--r--tools/usb/usbip/libsrc/sysfs_utils.h (renamed from drivers/staging/usbip/userspace/libsrc/sysfs_utils.h)0
-rw-r--r--tools/usb/usbip/libsrc/usbip_common.c (renamed from drivers/staging/usbip/userspace/libsrc/usbip_common.c)0
-rw-r--r--tools/usb/usbip/libsrc/usbip_common.h (renamed from drivers/staging/usbip/userspace/libsrc/usbip_common.h)0
-rw-r--r--tools/usb/usbip/libsrc/usbip_host_driver.c (renamed from drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c)0
-rw-r--r--tools/usb/usbip/libsrc/usbip_host_driver.h (renamed from drivers/staging/usbip/userspace/libsrc/usbip_host_driver.h)0
-rw-r--r--tools/usb/usbip/libsrc/vhci_driver.c (renamed from drivers/staging/usbip/userspace/libsrc/vhci_driver.c)0
-rw-r--r--tools/usb/usbip/libsrc/vhci_driver.h (renamed from drivers/staging/usbip/userspace/libsrc/vhci_driver.h)0
-rw-r--r--tools/usb/usbip/src/Makefile.am (renamed from drivers/staging/usbip/userspace/src/Makefile.am)0
-rw-r--r--tools/usb/usbip/src/usbip.c (renamed from drivers/staging/usbip/userspace/src/usbip.c)0
-rw-r--r--tools/usb/usbip/src/usbip.h (renamed from drivers/staging/usbip/userspace/src/usbip.h)0
-rw-r--r--tools/usb/usbip/src/usbip_attach.c (renamed from drivers/staging/usbip/userspace/src/usbip_attach.c)0
-rw-r--r--tools/usb/usbip/src/usbip_bind.c (renamed from drivers/staging/usbip/userspace/src/usbip_bind.c)0
-rw-r--r--tools/usb/usbip/src/usbip_detach.c (renamed from drivers/staging/usbip/userspace/src/usbip_detach.c)0
-rw-r--r--tools/usb/usbip/src/usbip_list.c (renamed from drivers/staging/usbip/userspace/src/usbip_list.c)0
-rw-r--r--tools/usb/usbip/src/usbip_network.c (renamed from drivers/staging/usbip/userspace/src/usbip_network.c)0
-rw-r--r--tools/usb/usbip/src/usbip_network.h (renamed from drivers/staging/usbip/userspace/src/usbip_network.h)0
-rw-r--r--tools/usb/usbip/src/usbip_port.c (renamed from drivers/staging/usbip/userspace/src/usbip_port.c)0
-rw-r--r--tools/usb/usbip/src/usbip_unbind.c (renamed from drivers/staging/usbip/userspace/src/usbip_unbind.c)0
-rw-r--r--tools/usb/usbip/src/usbipd.c (renamed from drivers/staging/usbip/userspace/src/usbipd.c)0
-rw-r--r--tools/usb/usbip/src/utils.c (renamed from drivers/staging/usbip/userspace/src/utils.c)0
-rw-r--r--tools/usb/usbip/src/utils.h (renamed from drivers/staging/usbip/userspace/src/utils.h)0
987 files changed, 17651 insertions, 8739 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 0a523c9a5ff4..482c74947de0 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -794,6 +794,7 @@ Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
<http://www.kroah.com/log/linux/maintainer-03.html>
<http://www.kroah.com/log/linux/maintainer-04.html>
<http://www.kroah.com/log/linux/maintainer-05.html>
+ <http://www.kroah.com/log/linux/maintainer-06.html>
NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
<https://lkml.org/lkml/2005/7/11/336>
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index baef432e8369..0ac23f2ed104 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -15,6 +15,17 @@ Optional properties for main touchpad device:
keycode generated by each GPIO. Linux keycodes are defined in
<dt-bindings/input/input.h>.
+- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
+ on GPIO bit changes. An array of up to 8 entries can be provided
+ indicating the Linux keycode mapped to each bit of the status byte,
+ starting at the LSB. Linux keycodes are defined in
+ <dt-bindings/input/input.h>.
+
+ Note: the numbering of the GPIOs and the bit they start at varies between
+ maXTouch devices. You must either refer to the documentation, or
+ experiment to determine which bit corresponds to which input. Use
+ KEY_RESERVED for unused padding values.
+
Example:
touch@4b {
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
new file mode 100644
index 000000000000..6fcedba46ae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+ "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupt-parent : specifies which IRQ controller we're connected to
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+ TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+ This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+ (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+ TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+ in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+ flags are valid:
+ - IRQ_TYPE_LEVEL_LOW
+ - IRQ_TYPE_LEVEL_HIGH
+ - IRQ_TYPE_EDGE_RISING
+ - IRQ_TYPE_EDGE_FALLING
+ - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+ GPIO controller, the second cell is the flags.
+
+- Keypad
+ This keypad is the same on all variants, supporting up to 96 different
+ keys. The linux-specific properties are modeled on those already existing
+ in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+ bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+ bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+ bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - linux,wakeup: use any event on keypad as wakeup event.
+
+Example:
+
+tc35893@44 {
+ compatible = "toshiba,tc35893";
+ reg = <0x44>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ tc3589x_gpio {
+ compatible = "toshiba,tc3589x-gpio";
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ tc3589x_keypad {
+ compatible = "toshiba,tc3589x-keypad";
+ interrupts = <6>;
+ debounce-delay-ms = <4>;
+ keypad,num-columns = <8>;
+ keypad,num-rows = <8>;
+ linux,no-autorepeat;
+ linux,wakeup;
+ linux,keymap = <0x0301006b
+ 0x04010066
+ 0x06040072
+ 0x040200d7
+ 0x0303006a
+ 0x0205000e
+ 0x0607008b
+ 0x0500001c
+ 0x0403000b
+ 0x03040034
+ 0x05020067
+ 0x0305006c
+ 0x040500e7
+ 0x0005009e
+ 0x06020073
+ 0x01030039
+ 0x07060069
+ 0x050500d9>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 65f4f7c43136..ee654e95d8ad 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -22,7 +22,7 @@ Optional properties:
width of 8 is assumed.
- ti,nand-ecc-opt: A string setting the ECC layout to use. One of:
- "sw" <deprecated> use "ham1" instead
+ "sw" 1-bit Hamming ecc code via software
"hw" <deprecated> use "ham1" instead
"hw-romcode" <deprecated> use "ham1" instead
"ham1" 1-bit Hamming ecc code
diff --git a/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt b/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt
new file mode 100644
index 000000000000..ab0bb4247d14
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt
@@ -0,0 +1,39 @@
+* Broadcom UniMAC MDIO bus controller
+
+Required properties:
+- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2",
+ "brcm,genet-mdio-v3", "brcm,genet-mdio-v4" or "brcm,unimac-mdio"
+- reg: address and length of the regsiter set for the device, first one is the
+ base register, and the second one is optional and for indirect accesses to
+ larger than 16-bits MDIO transactions
+- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"
+- #size-cells: must be 1
+- #address-cells: must be 0
+
+Optional properties:
+- interrupts: must be one if the interrupt is shared with the Ethernet MAC or
+ Ethernet switch this MDIO block is integrated from, or must be two, if there
+ are two separate interrupts, first one must be "mdio done" and second must be
+ for "mdio error"
+- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
+ to this hardware block, or must be "mdio_done" for the first interrupt and
+ "mdio_error" for the second when there are separate interrupts
+
+Child nodes of this MDIO bus controller node are standard Ethernet PHY device
+nodes as described in Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+
+mdio@403c0 {
+ compatible = "brcm,unimac-mdio";
+ reg = <0x403c0 0x8 0x40300 0x18>;
+ reg-names = "mdio", "mdio_indir_rw";
+ #size-cells = <1>;
+ #address-cells = <0>;
+
+ ...
+ phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/net/broadcom-sf2.txt b/Documentation/devicetree/bindings/net/broadcom-sf2.txt
new file mode 100644
index 000000000000..30d487597ecb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-sf2.txt
@@ -0,0 +1,78 @@
+* Broadcom Starfighter 2 integrated swich
+
+Required properties:
+
+- compatible: should be "brcm,bcm7445-switch-v4.0"
+- reg: addresses and length of the register sets for the device, must be 6
+ pairs of register addresses and lengths
+- interrupts: interrupts for the devices, must be two interrupts
+- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
+- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
+- #size-cells: must be 0
+- #address-cells: must be 2, see dsa/dsa.txt
+
+Subnodes:
+
+The integrated switch subnode should be specified according to the binding
+described in dsa/dsa.txt.
+
+Optional properties:
+
+- reg-names: litteral names for the device base register addresses, when present
+ must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb"
+
+- interrupt-names: litternal names for the device interrupt lines, when present
+ must be: "switch_0" and "switch_1"
+
+- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the
+ switch
+
+- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported
+ by the switch
+
+- brcm,fcb-pause-override: boolean property, if present indicates that the switch
+ supports Failover Control Block pause override capability
+
+- brcm,acb-packets-inflight: boolean property, if present indicates that the switch
+ Admission Control Block supports reporting the number of packets in-flight in a
+ switch queue
+
+Example:
+
+switch_top@f0b00000 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0 0xf0b00000 0x40804>;
+
+ ethernet_switch@0 {
+ compatible = "brcm,bcm7445-switch-v4.0";
+ #size-cells = <0>;
+ #address-cells = <2>;
+ reg = <0x0 0x40000
+ 0x40000 0x110
+ 0x40340 0x30
+ 0x40380 0x30
+ 0x40400 0x34
+ 0x40600 0x208>;
+ interrupts = <0 0x18 0
+ 0 0x19 0>;
+ brcm,num-gphy = <1>;
+ brcm,num-rgmii-ports = <2>;
+ brcm,fcb-pause-override;
+ brcm,acb-packets-inflight;
+
+ ...
+ switch@0 {
+ reg = <0 0>;
+ #size-cells = <0>;
+ #address-cells <1>;
+
+ port@0 {
+ label = "gphy";
+ reg = <0>;
+ };
+ ...
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
new file mode 100644
index 000000000000..9e331777c203
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -0,0 +1,67 @@
+Bosch MCAN controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible : Should be "bosch,m_can" for M_CAN controllers
+- reg : physical base address and size of the M_CAN
+ registers map and Message RAM
+- reg-names : Should be "m_can" and "message_ram"
+- interrupts : Should be the interrupt number of M_CAN interrupt
+ line 0 and line 1, could be same if sharing
+ the same interrupt.
+- interrupt-names : Should contain "int0" and "int1"
+- clocks : Clocks used by controller, should be host clock
+ and CAN clock.
+- clock-names : Should contain "hclk" and "cclk"
+- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+- pinctrl-names : Names corresponding to the numbered pinctrl states
+- bosch,mram-cfg : Message RAM configuration data.
+ Multiple M_CAN instances can share the same Message
+ RAM and each element(e.g Rx FIFO or Tx Buffer and etc)
+ number in Message RAM is also configurable,
+ so this property is telling driver how the shared or
+ private Message RAM are used by this M_CAN controller.
+
+ The format should be as follows:
+ <offset sidf_elems xidf_elems rxf0_elems rxf1_elems
+ rxb_elems txe_elems txb_elems>
+ The 'offset' is an address offset of the Message RAM
+ where the following elements start from. This is
+ usually set to 0x0 if you're using a private Message
+ RAM. The remain cells are used to specify how many
+ elements are used for each FIFO/Buffer.
+
+ M_CAN includes the following elements according to user manual:
+ 11-bit Filter 0-128 elements / 0-128 words
+ 29-bit Filter 0-64 elements / 0-128 words
+ Rx FIFO 0 0-64 elements / 0-1152 words
+ Rx FIFO 1 0-64 elements / 0-1152 words
+ Rx Buffers 0-64 elements / 0-1152 words
+ Tx Event FIFO 0-32 elements / 0-64 words
+ Tx Buffers 0-32 elements / 0-576 words
+
+ Please refer to 2.4.1 Message RAM Configuration in
+ Bosch M_CAN user manual for details.
+
+Example:
+SoC dtsi:
+m_can1: can@020e8000 {
+ compatible = "bosch,m_can";
+ reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <0 114 0x04>,
+ <0 114 0x04>;
+ interrupt-names = "int0", "int1";
+ clocks = <&clks IMX6SX_CLK_CANFD>,
+ <&clks IMX6SX_CLK_CANFD>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
+ status = "disabled";
+};
+
+Board dts:
+&m_can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_m_can1>;
+ status = "enabled";
+};
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
new file mode 100644
index 000000000000..002d8440bf66
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -0,0 +1,43 @@
+Renesas R-Car CAN controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible: "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
+ "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
+ "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
+ "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
+- reg: physical base address and size of the R-Car CAN register map.
+- interrupts: interrupt specifier for the sole interrupt.
+- clocks: phandles and clock specifiers for 3 CAN clock inputs.
+- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+- pinctrl-0: pin control group to be used for this controller.
+- pinctrl-names: must be "default".
+
+Optional properties:
+- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
+ <0x0> (default) : Peripheral clock (clkp1)
+ <0x1> : Peripheral clock (clkp2)
+ <0x3> : Externally input clock
+
+Example
+-------
+
+SoC common .dtsi file:
+
+ can0: can@e6e80000 {
+ compatible = "renesas,can-r8a7791";
+ reg = <0 0xe6e80000 0 0x1000>;
+ interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
+ <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ status = "disabled";
+ };
+
+Board specific .dts file:
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index 49f4f7ae3f51..a62c889aafca 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -39,6 +39,22 @@ Optionnal property:
This property is only used when switches are being
chained/cascaded together.
+- phy-handle : Phandle to a PHY on an external MDIO bus, not the
+ switch internal one. See
+ Documentation/devicetree/bindings/net/ethernet.txt
+ for details.
+
+- phy-mode : String representing the connection to the designated
+ PHY node specified by the 'phy-handle' property. See
+ Documentation/devicetree/bindings/net/ethernet.txt
+ for details.
+
+Optional subnodes:
+- fixed-link : Fixed-link subnode describing a link to a non-MDIO
+ managed entity. See
+ Documentation/devicetree/bindings/net/fixed-link.txt
+ for details.
+
Example:
dsa@0 {
@@ -58,6 +74,7 @@ Example:
port@0 {
reg = <0>;
label = "lan1";
+ phy-handle = <&phy0>;
};
port@1 {
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
index 2a60cd3e8d5d..3a9d67951606 100644
--- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -12,6 +12,10 @@ Required properties:
- altr,sysmgr-syscon : Should be the phandle to the system manager node that
encompasses the glue register, the register offset, and the register shift.
+Optional properties:
+altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
+ DWMAC controller is connected emac splitter.
+
Example:
gmac0: ethernet@ff700000 {
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 9b03c57563a4..e45ac3f926b1 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -39,6 +39,10 @@ Optional properties:
further clocks may be specified in derived bindings.
- clock-names: One name for each entry in the clocks property, the
first one should be "stmmaceth".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+ available this clock is used for programming the Timestamp Addend Register.
+ If not passed then the system clock will be used and this is fine on some
+ platforms.
Examples:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
index 0211c6d8a522..92fae82f35f2 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -62,7 +62,7 @@ Example:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 16 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&gsbi5_uart_default>;
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt
index 340980239ea9..ca69f5e3040c 100644
--- a/Documentation/devicetree/bindings/regulator/tps65090.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65090.txt
@@ -45,8 +45,8 @@ Example:
infet5-supply = <&some_reg>;
infet6-supply = <&some_reg>;
infet7-supply = <&some_reg>;
- vsys_l1-supply = <&some_reg>;
- vsys_l2-supply = <&some_reg>;
+ vsys-l1-supply = <&some_reg>;
+ vsys-l2-supply = <&some_reg>;
regulators {
dcdc1 {
diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
index 46f344965313..4eb7997674a0 100644
--- a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
+++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
@@ -1,7 +1,7 @@
ADI AXI-SPDIF controller
Required properties:
- - compatible : Must be "adi,axi-spdif-1.00.a"
+ - compatible : Must be "adi,axi-spdif-tx-1.00.a"
- reg : Must contain SPDIF core's registers location and length
- clocks : Pairs of phandle and specifier referencing the controller's clocks.
The controller expects two clocks, the clock used for the AXI interface and
diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
index 67a4087d53f9..bb9753b635a3 100644
--- a/Documentation/dma-buf-sharing.txt
+++ b/Documentation/dma-buf-sharing.txt
@@ -56,10 +56,10 @@ The dma_buf buffer sharing API usage contains the following steps:
size_t size, int flags,
const char *exp_name)
- If this succeeds, dma_buf_export allocates a dma_buf structure, and returns a
- pointer to the same. It also associates an anonymous file with this buffer,
- so it can be exported. On failure to allocate the dma_buf object, it returns
- NULL.
+ If this succeeds, dma_buf_export_named allocates a dma_buf structure, and
+ returns a pointer to the same. It also associates an anonymous file with this
+ buffer, so it can be exported. On failure to allocate the dma_buf object,
+ it returns NULL.
'exp_name' is the name of exporter - to facilitate information while
debugging.
@@ -76,7 +76,7 @@ The dma_buf buffer sharing API usage contains the following steps:
drivers and/or processes.
Interface:
- int dma_buf_fd(struct dma_buf *dmabuf)
+ int dma_buf_fd(struct dma_buf *dmabuf, int flags)
This API installs an fd for the anonymous file associated with this buffer;
returns either 'fd', or error.
@@ -157,7 +157,9 @@ to request use of buffer for allocation.
"dma_buf->ops->" indirection from the users of this interface.
In struct dma_buf_ops, unmap_dma_buf is defined as
- void (*unmap_dma_buf)(struct dma_buf_attachment *, struct sg_table *);
+ void (*unmap_dma_buf)(struct dma_buf_attachment *,
+ struct sg_table *,
+ enum dma_data_direction);
unmap_dma_buf signifies the end-of-DMA for the attachment provided. Like
map_dma_buf, this API also must be implemented by the exporter.
diff --git a/Documentation/filesystems/nfs/nfs-rdma.txt b/Documentation/filesystems/nfs/nfs-rdma.txt
index e386f7e4bcee..724043858b08 100644
--- a/Documentation/filesystems/nfs/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs/nfs-rdma.txt
@@ -138,9 +138,9 @@ Installation
- Build, install, reboot
The NFS/RDMA code will be enabled automatically if NFS and RDMA
- are turned on. The NFS/RDMA client and server are configured via the hidden
- SUNRPC_XPRT_RDMA config option that depends on SUNRPC and INFINIBAND. The
- value of SUNRPC_XPRT_RDMA will be:
+ are turned on. The NFS/RDMA client and server are configured via the
+ SUNRPC_XPRT_RDMA_CLIENT and SUNRPC_XPRT_RDMA_SERVER config options that both
+ depend on SUNRPC and INFINIBAND. The default value of both options will be:
- N if either SUNRPC or INFINIBAND are N, in this case the NFS/RDMA client
and server will not be built
@@ -235,8 +235,9 @@ NFS/RDMA Setup
- Start the NFS server
- If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
- kernel config), load the RDMA transport module:
+ If the NFS/RDMA server was built as a module
+ (CONFIG_SUNRPC_XPRT_RDMA_SERVER=m in kernel config), load the RDMA
+ transport module:
$ modprobe svcrdma
@@ -255,8 +256,9 @@ NFS/RDMA Setup
- On the client system
- If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
- kernel config), load the RDMA client module:
+ If the NFS/RDMA client was built as a module
+ (CONFIG_SUNRPC_XPRT_RDMA_CLIENT=m in kernel config), load the RDMA client
+ module:
$ modprobe xprtrdma.ko
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
index 1fe0ccb1af55..8ea3e90ace07 100644
--- a/Documentation/filesystems/seq_file.txt
+++ b/Documentation/filesystems/seq_file.txt
@@ -235,6 +235,39 @@ be used for more than one file, you can store an arbitrary pointer in the
private field of the seq_file structure; that value can then be retrieved
by the iterator functions.
+There is also a wrapper function to seq_open() called seq_open_private(). It
+kmallocs a zero filled block of memory and stores a pointer to it in the
+private field of the seq_file structure, returning 0 on success. The
+block size is specified in a third parameter to the function, e.g.:
+
+ static int ct_open(struct inode *inode, struct file *file)
+ {
+ return seq_open_private(file, &ct_seq_ops,
+ sizeof(struct mystruct));
+ }
+
+There is also a variant function, __seq_open_private(), which is functionally
+identical except that, if successful, it returns the pointer to the allocated
+memory block, allowing further initialisation e.g.:
+
+ static int ct_open(struct inode *inode, struct file *file)
+ {
+ struct mystruct *p =
+ __seq_open_private(file, &ct_seq_ops, sizeof(*p));
+
+ if (!p)
+ return -ENOMEM;
+
+ p->foo = bar; /* initialize my stuff */
+ ...
+ p->baz = true;
+
+ return 0;
+ }
+
+A corresponding close function, seq_release_private() is available which
+frees the memory allocated in the corresponding open.
+
The other operations of interest - read(), llseek(), and release() - are
all implemented by the seq_file code itself. So a virtual file's
file_operations structure will look like:
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index 76546324e968..6ce544191ca6 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -53,7 +53,20 @@ with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned
if and only if no GPIO has been assigned to the device/function/index triplet,
other error codes are used for cases where a GPIO has been assigned but an error
occurred while trying to acquire it. This is useful to discriminate between mere
-errors and an absence of GPIO for optional GPIO parameters.
+errors and an absence of GPIO for optional GPIO parameters. For the common
+pattern where a GPIO is optional, the gpiod_get_optional() and
+gpiod_get_index_optional() functions can be used. These functions return NULL
+instead of -ENOENT if no GPIO has been assigned to the requested function:
+
+
+ struct gpio_desc *gpiod_get_optional(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+
+ struct gpio_desc *gpiod_get_index_optional(struct device *dev,
+ const char *con_id,
+ unsigned int index,
+ enum gpiod_flags flags)
Device-managed variants of these functions are also defined:
@@ -65,6 +78,15 @@ Device-managed variants of these functions are also defined:
unsigned int idx,
enum gpiod_flags flags)
+ struct gpio_desc *devm_gpiod_get_optional(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+
+ struct gpio_desc * devm_gpiod_get_index_optional(struct device *dev,
+ const char *con_id,
+ unsigned int index,
+ enum gpiod_flags flags)
+
A GPIO descriptor can be disposed of using the gpiod_put() function:
void gpiod_put(struct gpio_desc *desc)
diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface
index 3e742ba25536..2ac78ae1039d 100644
--- a/Documentation/i2c/dev-interface
+++ b/Documentation/i2c/dev-interface
@@ -57,12 +57,12 @@ Well, you are all set up now. You can now use SMBus commands or plain
I2C to communicate with your device. SMBus commands are preferred if
the device supports them. Both are illustrated below.
- __u8 register = 0x10; /* Device register to access */
+ __u8 reg = 0x10; /* Device register to access */
__s32 res;
char buf[10];
/* Using SMBus commands */
- res = i2c_smbus_read_word_data(file, register);
+ res = i2c_smbus_read_word_data(file, reg);
if (res < 0) {
/* ERROR HANDLING: i2c transaction failed */
} else {
@@ -70,11 +70,11 @@ the device supports them. Both are illustrated below.
}
/* Using I2C Write, equivalent of
- i2c_smbus_write_word_data(file, register, 0x6543) */
- buf[0] = register;
+ i2c_smbus_write_word_data(file, reg, 0x6543) */
+ buf[0] = reg;
buf[1] = 0x43;
buf[2] = 0x65;
- if (write(file, buf, 3) ! =3) {
+ if (write(file, buf, 3) != 3) {
/* ERROR HANDLING: i2c transaction failed */
}
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 88d5a863712a..6c0b9f27e465 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -18,7 +18,7 @@ memory image to a dump file on the local disk, or across the network to
a remote system.
Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
-and s390x architectures.
+s390x and arm architectures.
When the system kernel boots, it reserves a small section of memory for
the dump-capture kernel. This ensures that ongoing Direct Memory Access
@@ -112,7 +112,7 @@ There are two possible methods of using Kdump.
2) Or use the system kernel binary itself as dump-capture kernel and there is
no need to build a separate dump-capture kernel. This is possible
only with the architectures which support a relocatable kernel. As
- of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
+ of today, i386, x86_64, ppc64, ia64 and arm architectures support relocatable
kernel.
Building a relocatable kernel is advantageous from the point of view that
@@ -241,6 +241,13 @@ Dump-capture kernel config options (Arch Dependent, ia64)
kernel will be aligned to 64Mb, so if the start address is not then
any space below the alignment point will be wasted.
+Dump-capture kernel config options (Arch Dependent, arm)
+----------------------------------------------------------
+
+- To use a relocatable kernel,
+ Enable "AUTO_ZRELADDR" support under "Boot" options:
+
+ AUTO_ZRELADDR=y
Extended crashkernel syntax
===========================
@@ -256,6 +263,10 @@ The syntax is:
crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
range=start-[end]
+Please note, on arm, the offset is required.
+ crashkernel=<range1>:<size1>[,<range2>:<size2>,...]@offset
+ range=start-[end]
+
'start' is inclusive and 'end' is exclusive.
For example:
@@ -296,6 +307,12 @@ Boot into System Kernel
on the memory consumption of the kdump system. In general this is not
dependent on the memory size of the production system.
+ On arm, use "crashkernel=Y@X". Note that the start address of the kernel
+ will be aligned to 128MiB (0x08000000), so if the start address is not then
+ any space below the alignment point may be overwritten by the dump-capture kernel,
+ which means it is possible that the vmcore is not that precise as expected.
+
+
Load the Dump-capture Kernel
============================
@@ -315,7 +332,8 @@ For ia64:
- Use vmlinux or vmlinuz.gz
For s390x:
- Use image or bzImage
-
+For arm:
+ - Use zImage
If you are using a uncompressed vmlinux image then use following command
to load dump-capture kernel.
@@ -331,6 +349,15 @@ to load dump-capture kernel.
--initrd=<initrd-for-dump-capture-kernel> \
--append="root=<root-dev> <arch-specific-options>"
+If you are using a compressed zImage, then use following command
+to load dump-capture kernel.
+
+ kexec --type zImage -p <dump-capture-kernel-bzImage> \
+ --initrd=<initrd-for-dump-capture-kernel> \
+ --dtb=<dtb-for-dump-capture-kernel> \
+ --append="root=<root-dev> <arch-specific-options>"
+
+
Please note, that --args-linux does not need to be specified for ia64.
It is planned to make this a no-op on that architecture, but for now
it should be omitted
@@ -347,6 +374,9 @@ For ppc64:
For s390x:
"1 maxcpus=1 cgroup_disable=memory"
+For arm:
+ "1 maxcpus=1 reset_devices"
+
Notes on loading the dump-capture kernel:
* By default, the ELF headers are stored in ELF64 format to support
diff --git a/Documentation/misc-devices/lis3lv02d b/Documentation/misc-devices/lis3lv02d
index af815b9ba413..f89960a0ff95 100644
--- a/Documentation/misc-devices/lis3lv02d
+++ b/Documentation/misc-devices/lis3lv02d
@@ -59,7 +59,7 @@ acts similar to /dev/rtc and reacts on free-fall interrupts received
from the device. It supports blocking operations, poll/select and
fasync operation modes. You must read 1 bytes from the device. The
result is number of free-fall interrupts since the last successful
-read (or 255 if number of interrupts would not fit). See the hpfall.c
+read (or 255 if number of interrupts would not fit). See the freefall.c
file for an example on using the device.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 29a93518bf18..db2383cb1df9 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -65,6 +65,12 @@ neigh/default/gc_thresh1 - INTEGER
purge entries if there are fewer than this number.
Default: 128
+neigh/default/gc_thresh2 - INTEGER
+ Threshold when garbage collector becomes more aggressive about
+ purging entries. Entries older than 5 seconds will be cleared
+ when over this number.
+ Default: 512
+
neigh/default/gc_thresh3 - INTEGER
Maximum number of neighbor entries allowed. Increase this
when using large numbers of interfaces and when communicating
@@ -838,6 +844,11 @@ igmp_max_memberships - INTEGER
conf/all/* is special, changes the settings for all interfaces
+igmp_qrv - INTEGER
+ Controls the IGMP query robustness variable (see RFC2236 8.1).
+ Default: 2 (as specified by RFC2236 8.1)
+ Minimum: 1 (as specified by RFC6636 4.5)
+
log_martians - BOOLEAN
Log packets with impossible addresses to kernel log.
log_martians for the interface will be enabled if at least one of
@@ -1146,6 +1157,11 @@ anycast_src_echo_reply - BOOLEAN
FALSE: disabled
Default: FALSE
+mld_qrv - INTEGER
+ Controls the MLD query robustness variable (see RFC3810 9.1).
+ Default: 2 (as specified by RFC3810 9.1)
+ Minimum: 1 (as specified by RFC6636 4.5)
+
IPv6 Fragmentation:
ip6frag_high_thresh - INTEGER
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index 897f942b976b..412f45ca2d73 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -1,102 +1,307 @@
-The existing interfaces for getting network packages time stamped are:
+
+1. Control Interfaces
+
+The interfaces for receiving network packages timestamps are:
* SO_TIMESTAMP
- Generate time stamp for each incoming packet using the (not necessarily
- monotonous!) system time. Result is returned via recv_msg() in a
- control message as timeval (usec resolution).
+ Generates a timestamp for each incoming packet in (not necessarily
+ monotonic) system time. Reports the timestamp via recvmsg() in a
+ control message as struct timeval (usec resolution).
* SO_TIMESTAMPNS
- Same time stamping mechanism as SO_TIMESTAMP, but returns result as
- timespec (nsec resolution).
+ Same timestamping mechanism as SO_TIMESTAMP, but reports the
+ timestamp as struct timespec (nsec resolution).
* IP_MULTICAST_LOOP + SO_TIMESTAMP[NS]
- Only for multicasts: approximate send time stamp by receiving the looped
- packet and using its receive time stamp.
+ Only for multicast:approximate transmit timestamp obtained by
+ reading the looped packet receive timestamp.
-The following interface complements the existing ones: receive time
-stamps can be generated and returned for arbitrary packets and much
-closer to the point where the packet is really sent. Time stamps can
-be generated in software (as before) or in hardware (if the hardware
-has such a feature).
+* SO_TIMESTAMPING
+ Generates timestamps on reception, transmission or both. Supports
+ multiple timestamp sources, including hardware. Supports generating
+ timestamps for stream sockets.
-SO_TIMESTAMPING:
-Instructs the socket layer which kind of information should be collected
-and/or reported. The parameter is an integer with some of the following
-bits set. Setting other bits is an error and doesn't change the current
-state.
+1.1 SO_TIMESTAMP:
-Four of the bits are requests to the stack to try to generate
-timestamps. Any combination of them is valid.
+This socket option enables timestamping of datagrams on the reception
+path. Because the destination socket, if any, is not known early in
+the network stack, the feature has to be enabled for all packets. The
+same is true for all early receive timestamp options.
-SOF_TIMESTAMPING_TX_HARDWARE: try to obtain send time stamps in hardware
-SOF_TIMESTAMPING_TX_SOFTWARE: try to obtain send time stamps in software
-SOF_TIMESTAMPING_RX_HARDWARE: try to obtain receive time stamps in hardware
-SOF_TIMESTAMPING_RX_SOFTWARE: try to obtain receive time stamps in software
+For interface details, see `man 7 socket`.
+
+
+1.2 SO_TIMESTAMPNS:
+
+This option is identical to SO_TIMESTAMP except for the returned data type.
+Its struct timespec allows for higher resolution (ns) timestamps than the
+timeval of SO_TIMESTAMP (ms).
+
+
+1.3 SO_TIMESTAMPING:
+
+Supports multiple types of timestamp requests. As a result, this
+socket option takes a bitmap of flags, not a boolean. In
+
+ err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, (void *) val, &val);
+
+val is an integer with any of the following bits set. Setting other
+bit returns EINVAL and does not change the current state.
-The other three bits control which timestamps will be reported in a
-generated control message. If none of these bits are set or if none of
-the set bits correspond to data that is available, then the control
-message will not be generated:
-SOF_TIMESTAMPING_SOFTWARE: report systime if available
-SOF_TIMESTAMPING_SYS_HARDWARE: report hwtimetrans if available (deprecated)
-SOF_TIMESTAMPING_RAW_HARDWARE: report hwtimeraw if available
+1.3.1 Timestamp Generation
-It is worth noting that timestamps may be collected for reasons other
-than being requested by a particular socket with
-SOF_TIMESTAMPING_[TR]X_(HARD|SOFT)WARE. For example, most drivers that
-can generate hardware receive timestamps ignore
-SOF_TIMESTAMPING_RX_HARDWARE. It is still a good idea to set that flag
-in case future drivers pay attention.
+Some bits are requests to the stack to try to generate timestamps. Any
+combination of them is valid. Changes to these bits apply to newly
+created packets, not to packets already in the stack. As a result, it
+is possible to selectively request timestamps for a subset of packets
+(e.g., for sampling) by embedding an send() call within two setsockopt
+calls, one to enable timestamp generation and one to disable it.
+Timestamps may also be generated for reasons other than being
+requested by a particular socket, such as when receive timestamping is
+enabled system wide, as explained earlier.
-If timestamps are reported, they will appear in a control message with
-cmsg_level==SOL_SOCKET, cmsg_type==SO_TIMESTAMPING, and a payload like
-this:
+SOF_TIMESTAMPING_RX_HARDWARE:
+ Request rx timestamps generated by the network adapter.
+
+SOF_TIMESTAMPING_RX_SOFTWARE:
+ Request rx timestamps when data enters the kernel. These timestamps
+ are generated just after a device driver hands a packet to the
+ kernel receive stack.
+
+SOF_TIMESTAMPING_TX_HARDWARE:
+ Request tx timestamps generated by the network adapter.
+
+SOF_TIMESTAMPING_TX_SOFTWARE:
+ Request tx timestamps when data leaves the kernel. These timestamps
+ are generated in the device driver as close as possible, but always
+ prior to, passing the packet to the network interface. Hence, they
+ require driver support and may not be available for all devices.
+
+SOF_TIMESTAMPING_TX_SCHED:
+ Request tx timestamps prior to entering the packet scheduler. Kernel
+ transmit latency is, if long, often dominated by queuing delay. The
+ difference between this timestamp and one taken at
+ SOF_TIMESTAMPING_TX_SOFTWARE will expose this latency independent
+ of protocol processing. The latency incurred in protocol
+ processing, if any, can be computed by subtracting a userspace
+ timestamp taken immediately before send() from this timestamp. On
+ machines with virtual devices where a transmitted packet travels
+ through multiple devices and, hence, multiple packet schedulers,
+ a timestamp is generated at each layer. This allows for fine
+ grained measurement of queuing delay.
+
+SOF_TIMESTAMPING_TX_ACK:
+ Request tx timestamps when all data in the send buffer has been
+ acknowledged. This only makes sense for reliable protocols. It is
+ currently only implemented for TCP. For that protocol, it may
+ over-report measurement, because the timestamp is generated when all
+ data up to and including the buffer at send() was acknowledged: the
+ cumulative acknowledgment. The mechanism ignores SACK and FACK.
+
+
+1.3.2 Timestamp Reporting
+
+The other three bits control which timestamps will be reported in a
+generated control message. Changes to the bits take immediate
+effect at the timestamp reporting locations in the stack. Timestamps
+are only reported for packets that also have the relevant timestamp
+generation request set.
+
+SOF_TIMESTAMPING_SOFTWARE:
+ Report any software timestamps when available.
+
+SOF_TIMESTAMPING_SYS_HARDWARE:
+ This option is deprecated and ignored.
+
+SOF_TIMESTAMPING_RAW_HARDWARE:
+ Report hardware timestamps as generated by
+ SOF_TIMESTAMPING_TX_HARDWARE when available.
+
+
+1.3.3 Timestamp Options
+
+The interface supports one option
+
+SOF_TIMESTAMPING_OPT_ID:
+
+ Generate a unique identifier along with each packet. A process can
+ have multiple concurrent timestamping requests outstanding. Packets
+ can be reordered in the transmit path, for instance in the packet
+ scheduler. In that case timestamps will be queued onto the error
+ queue out of order from the original send() calls. This option
+ embeds a counter that is incremented at send() time, to order
+ timestamps within a flow.
+
+ This option is implemented only for transmit timestamps. There, the
+ timestamp is always looped along with a struct sock_extended_err.
+ The option modifies field ee_info to pass an id that is unique
+ among all possibly concurrently outstanding timestamp requests for
+ that socket. In practice, it is a monotonically increasing u32
+ (that wraps).
+
+ In datagram sockets, the counter increments on each send call. In
+ stream sockets, it increments with every byte.
+
+
+1.4 Bytestream Timestamps
+
+The SO_TIMESTAMPING interface supports timestamping of bytes in a
+bytestream. Each request is interpreted as a request for when the
+entire contents of the buffer has passed a timestamping point. That
+is, for streams option SOF_TIMESTAMPING_TX_SOFTWARE will record
+when all bytes have reached the device driver, regardless of how
+many packets the data has been converted into.
+
+In general, bytestreams have no natural delimiters and therefore
+correlating a timestamp with data is non-trivial. A range of bytes
+may be split across segments, any segments may be merged (possibly
+coalescing sections of previously segmented buffers associated with
+independent send() calls). Segments can be reordered and the same
+byte range can coexist in multiple segments for protocols that
+implement retransmissions.
+
+It is essential that all timestamps implement the same semantics,
+regardless of these possible transformations, as otherwise they are
+incomparable. Handling "rare" corner cases differently from the
+simple case (a 1:1 mapping from buffer to skb) is insufficient
+because performance debugging often needs to focus on such outliers.
+
+In practice, timestamps can be correlated with segments of a
+bytestream consistently, if both semantics of the timestamp and the
+timing of measurement are chosen correctly. This challenge is no
+different from deciding on a strategy for IP fragmentation. There, the
+definition is that only the first fragment is timestamped. For
+bytestreams, we chose that a timestamp is generated only when all
+bytes have passed a point. SOF_TIMESTAMPING_TX_ACK as defined is easy to
+implement and reason about. An implementation that has to take into
+account SACK would be more complex due to possible transmission holes
+and out of order arrival.
+
+On the host, TCP can also break the simple 1:1 mapping from buffer to
+skbuff as a result of Nagle, cork, autocork, segmentation and GSO. The
+implementation ensures correctness in all cases by tracking the
+individual last byte passed to send(), even if it is no longer the
+last byte after an skbuff extend or merge operation. It stores the
+relevant sequence number in skb_shinfo(skb)->tskey. Because an skbuff
+has only one such field, only one timestamp can be generated.
+
+In rare cases, a timestamp request can be missed if two requests are
+collapsed onto the same skb. A process can detect this situation by
+enabling SOF_TIMESTAMPING_OPT_ID and comparing the byte offset at
+send time with the value returned for each timestamp. It can prevent
+the situation by always flushing the TCP stack in between requests,
+for instance by enabling TCP_NODELAY and disabling TCP_CORK and
+autocork.
+
+These precautions ensure that the timestamp is generated only when all
+bytes have passed a timestamp point, assuming that the network stack
+itself does not reorder the segments. The stack indeed tries to avoid
+reordering. The one exception is under administrator control: it is
+possible to construct a packet scheduler configuration that delays
+segments from the same stream differently. Such a setup would be
+unusual.
+
+
+2 Data Interfaces
+
+Timestamps are read using the ancillary data feature of recvmsg().
+See `man 3 cmsg` for details of this interface. The socket manual
+page (`man 7 socket`) describes how timestamps generated with
+SO_TIMESTAMP and SO_TIMESTAMPNS records can be retrieved.
+
+
+2.1 SCM_TIMESTAMPING records
+
+These timestamps are returned in a control message with cmsg_level
+SOL_SOCKET, cmsg_type SCM_TIMESTAMPING, and payload of type
struct scm_timestamping {
- struct timespec systime;
- struct timespec hwtimetrans;
- struct timespec hwtimeraw;
+ struct timespec ts[3];
};
-recvmsg() can be used to get this control message for regular incoming
-packets. For send time stamps the outgoing packet is looped back to
-the socket's error queue with the send time stamp(s) attached. It can
-be received with recvmsg(flags=MSG_ERRQUEUE). The call returns the
-original outgoing packet data including all headers preprended down to
-and including the link layer, the scm_timestamping control message and
-a sock_extended_err control message with ee_errno==ENOMSG and
-ee_origin==SO_EE_ORIGIN_TIMESTAMPING. A socket with such a pending
-bounced packet is ready for reading as far as select() is concerned.
-If the outgoing packet has to be fragmented, then only the first
-fragment is time stamped and returned to the sending socket.
-
-All three values correspond to the same event in time, but were
-generated in different ways. Each of these values may be empty (= all
-zero), in which case no such value was available. If the application
-is not interested in some of these values, they can be left blank to
-avoid the potential overhead of calculating them.
-
-systime is the value of the system time at that moment. This
-corresponds to the value also returned via SO_TIMESTAMP[NS]. If the
-time stamp was generated by hardware, then this field is
-empty. Otherwise it is filled in if SOF_TIMESTAMPING_SOFTWARE is
-set.
-
-hwtimeraw is the original hardware time stamp. Filled in if
-SOF_TIMESTAMPING_RAW_HARDWARE is set. No assumptions about its
-relation to system time should be made.
-
-hwtimetrans is always zero. This field is deprecated. It used to hold
-hw timestamps converted to system time. Instead, expose the hardware
-clock device on the NIC directly as a HW PTP clock source, to allow
-time conversion in userspace and optionally synchronize system time
-with a userspace PTP stack such as linuxptp. For the PTP clock API,
-see Documentation/ptp/ptp.txt.
-
-
-SIOCSHWTSTAMP, SIOCGHWTSTAMP:
+The structure can return up to three timestamps. This is a legacy
+feature. Only one field is non-zero at any time. Most timestamps
+are passed in ts[0]. Hardware timestamps are passed in ts[2].
+
+ts[1] used to hold hardware timestamps converted to system time.
+Instead, expose the hardware clock device on the NIC directly as
+a HW PTP clock source, to allow time conversion in userspace and
+optionally synchronize system time with a userspace PTP stack such
+as linuxptp. For the PTP clock API, see Documentation/ptp/ptp.txt.
+
+2.1.1 Transmit timestamps with MSG_ERRQUEUE
+
+For transmit timestamps the outgoing packet is looped back to the
+socket's error queue with the send timestamp(s) attached. A process
+receives the timestamps by calling recvmsg() with flag MSG_ERRQUEUE
+set and with a msg_control buffer sufficiently large to receive the
+relevant metadata structures. The recvmsg call returns the original
+outgoing data packet with two ancillary messages attached.
+
+A message of cm_level SOL_IP(V6) and cm_type IP(V6)_RECVERR
+embeds a struct sock_extended_err. This defines the error type. For
+timestamps, the ee_errno field is ENOMSG. The other ancillary message
+will have cm_level SOL_SOCKET and cm_type SCM_TIMESTAMPING. This
+embeds the struct scm_timestamping.
+
+
+2.1.1.2 Timestamp types
+
+The semantics of the three struct timespec are defined by field
+ee_info in the extended error structure. It contains a value of
+type SCM_TSTAMP_* to define the actual timestamp passed in
+scm_timestamping.
+
+The SCM_TSTAMP_* types are 1:1 matches to the SOF_TIMESTAMPING_*
+control fields discussed previously, with one exception. For legacy
+reasons, SCM_TSTAMP_SND is equal to zero and can be set for both
+SOF_TIMESTAMPING_TX_HARDWARE and SOF_TIMESTAMPING_TX_SOFTWARE. It
+is the first if ts[2] is non-zero, the second otherwise, in which
+case the timestamp is stored in ts[0].
+
+
+2.1.1.3 Fragmentation
+
+Fragmentation of outgoing datagrams is rare, but is possible, e.g., by
+explicitly disabling PMTU discovery. If an outgoing packet is fragmented,
+then only the first fragment is timestamped and returned to the sending
+socket.
+
+
+2.1.1.4 Packet Payload
+
+The calling application is often not interested in receiving the whole
+packet payload that it passed to the stack originally: the socket
+error queue mechanism is just a method to piggyback the timestamp on.
+In this case, the application can choose to read datagrams with a
+smaller buffer, possibly even of length 0. The payload is truncated
+accordingly. Until the process calls recvmsg() on the error queue,
+however, the full packet is queued, taking up budget from SO_RCVBUF.
+
+
+2.1.1.5 Blocking Read
+
+Reading from the error queue is always a non-blocking operation. To
+block waiting on a timestamp, use poll or select. poll() will return
+POLLERR in pollfd.revents if any data is ready on the error queue.
+There is no need to pass this flag in pollfd.events. This flag is
+ignored on request. See also `man 2 poll`.
+
+
+2.1.2 Receive timestamps
+
+On reception, there is no reason to read from the socket error queue.
+The SCM_TIMESTAMPING ancillary data is sent along with the packet data
+on a normal recvmsg(). Since this is not a socket error, it is not
+accompanied by a message SOL_IP(V6)/IP(V6)_RECVERROR. In this case,
+the meaning of the three fields in struct scm_timestamping is
+implicitly defined. ts[0] holds a software timestamp if set, ts[1]
+is again deprecated and ts[2] holds a hardware timestamp if set.
+
+
+3. Hardware Timestamping configuration: SIOCSHWTSTAMP and SIOCGHWTSTAMP
Hardware time stamping must also be initialized for each device driver
that is expected to do hardware time stamping. The parameter is defined in
@@ -167,8 +372,7 @@ enum {
*/
};
-
-DEVICE IMPLEMENTATION
+3.1 Hardware Timestamping Implementation: Device Drivers
A driver which supports hardware time stamping must support the
SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with
diff --git a/Documentation/networking/timestamping/Makefile b/Documentation/networking/timestamping/Makefile
index d934afc8306a..95e239c70076 100644
--- a/Documentation/networking/timestamping/Makefile
+++ b/Documentation/networking/timestamping/Makefile
@@ -1,14 +1,20 @@
+# To compile, from the source root
+#
+# make headers_install
+# make M=documentation
+
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
-hostprogs-y := timestamping hwtstamp_config
+hostprogs-y := timestamping txtimestamp hwtstamp_config
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_timestamping.o += -I$(objtree)/usr/include
+HOSTCFLAGS_txtimestamp.o += -I$(objtree)/usr/include
HOSTCFLAGS_hwtstamp_config.o += -I$(objtree)/usr/include
clean:
- rm -f timestamping hwtstamp_config
+ rm -f timestamping txtimestamp hwtstamp_config
diff --git a/Documentation/networking/timestamping/txtimestamp.c b/Documentation/networking/timestamping/txtimestamp.c
new file mode 100644
index 000000000000..b32fc2a07734
--- /dev/null
+++ b/Documentation/networking/timestamping/txtimestamp.c
@@ -0,0 +1,469 @@
+/*
+ * Copyright 2014 Google Inc.
+ * Author: willemb@google.com (Willem de Bruijn)
+ *
+ * Test software tx timestamping, including
+ *
+ * - SCHED, SND and ACK timestamps
+ * - RAW, UDP and TCP
+ * - IPv4 and IPv6
+ * - various packet sizes (to test GSO and TSO)
+ *
+ * Consult the command line arguments for help on running
+ * the various testcases.
+ *
+ * This test requires a dummy TCP server.
+ * A simple `nc6 [-u] -l -p $DESTPORT` will do
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <arpa/inet.h>
+#include <asm/types.h>
+#include <error.h>
+#include <errno.h>
+#include <linux/errqueue.h>
+#include <linux/if_ether.h>
+#include <linux/net_tstamp.h>
+#include <netdb.h>
+#include <net/if.h>
+#include <netinet/in.h>
+#include <netinet/ip.h>
+#include <netinet/udp.h>
+#include <netinet/tcp.h>
+#include <netpacket/packet.h>
+#include <poll.h>
+#include <stdarg.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/select.h>
+#include <sys/socket.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <time.h>
+#include <unistd.h>
+
+/* command line parameters */
+static int cfg_proto = SOCK_STREAM;
+static int cfg_ipproto = IPPROTO_TCP;
+static int cfg_num_pkts = 4;
+static int do_ipv4 = 1;
+static int do_ipv6 = 1;
+static int cfg_payload_len = 10;
+static uint16_t dest_port = 9000;
+
+static struct sockaddr_in daddr;
+static struct sockaddr_in6 daddr6;
+static struct timespec ts_prev;
+
+static void __print_timestamp(const char *name, struct timespec *cur,
+ uint32_t key, int payload_len)
+{
+ if (!(cur->tv_sec | cur->tv_nsec))
+ return;
+
+ fprintf(stderr, " %s: %lu s %lu us (seq=%u, len=%u)",
+ name, cur->tv_sec, cur->tv_nsec / 1000,
+ key, payload_len);
+
+ if ((ts_prev.tv_sec | ts_prev.tv_nsec)) {
+ int64_t cur_ms, prev_ms;
+
+ cur_ms = (long) cur->tv_sec * 1000 * 1000;
+ cur_ms += cur->tv_nsec / 1000;
+
+ prev_ms = (long) ts_prev.tv_sec * 1000 * 1000;
+ prev_ms += ts_prev.tv_nsec / 1000;
+
+ fprintf(stderr, " (%+ld us)", cur_ms - prev_ms);
+ }
+
+ ts_prev = *cur;
+ fprintf(stderr, "\n");
+}
+
+static void print_timestamp_usr(void)
+{
+ struct timespec ts;
+ struct timeval tv; /* avoid dependency on -lrt */
+
+ gettimeofday(&tv, NULL);
+ ts.tv_sec = tv.tv_sec;
+ ts.tv_nsec = tv.tv_usec * 1000;
+
+ __print_timestamp(" USR", &ts, 0, 0);
+}
+
+static void print_timestamp(struct scm_timestamping *tss, int tstype,
+ int tskey, int payload_len)
+{
+ const char *tsname;
+
+ switch (tstype) {
+ case SCM_TSTAMP_SCHED:
+ tsname = " ENQ";
+ break;
+ case SCM_TSTAMP_SND:
+ tsname = " SND";
+ break;
+ case SCM_TSTAMP_ACK:
+ tsname = " ACK";
+ break;
+ default:
+ error(1, 0, "unknown timestamp type: %u",
+ tstype);
+ }
+ __print_timestamp(tsname, &tss->ts[0], tskey, payload_len);
+}
+
+static void __poll(int fd)
+{
+ struct pollfd pollfd;
+ int ret;
+
+ memset(&pollfd, 0, sizeof(pollfd));
+ pollfd.fd = fd;
+ ret = poll(&pollfd, 1, 100);
+ if (ret != 1)
+ error(1, errno, "poll");
+}
+
+static void __recv_errmsg_cmsg(struct msghdr *msg, int payload_len)
+{
+ struct sock_extended_err *serr = NULL;
+ struct scm_timestamping *tss = NULL;
+ struct cmsghdr *cm;
+
+ for (cm = CMSG_FIRSTHDR(msg);
+ cm && cm->cmsg_len;
+ cm = CMSG_NXTHDR(msg, cm)) {
+ if (cm->cmsg_level == SOL_SOCKET &&
+ cm->cmsg_type == SCM_TIMESTAMPING) {
+ tss = (void *) CMSG_DATA(cm);
+ } else if ((cm->cmsg_level == SOL_IP &&
+ cm->cmsg_type == IP_RECVERR) ||
+ (cm->cmsg_level == SOL_IPV6 &&
+ cm->cmsg_type == IPV6_RECVERR)) {
+
+ serr = (void *) CMSG_DATA(cm);
+ if (serr->ee_errno != ENOMSG ||
+ serr->ee_origin != SO_EE_ORIGIN_TIMESTAMPING) {
+ fprintf(stderr, "unknown ip error %d %d\n",
+ serr->ee_errno,
+ serr->ee_origin);
+ serr = NULL;
+ }
+ } else
+ fprintf(stderr, "unknown cmsg %d,%d\n",
+ cm->cmsg_level, cm->cmsg_type);
+ }
+
+ if (serr && tss)
+ print_timestamp(tss, serr->ee_info, serr->ee_data, payload_len);
+}
+
+static int recv_errmsg(int fd)
+{
+ static char ctrl[1024 /* overprovision*/];
+ static struct msghdr msg;
+ struct iovec entry;
+ static char *data;
+ int ret = 0;
+
+ data = malloc(cfg_payload_len);
+ if (!data)
+ error(1, 0, "malloc");
+
+ memset(&msg, 0, sizeof(msg));
+ memset(&entry, 0, sizeof(entry));
+ memset(ctrl, 0, sizeof(ctrl));
+
+ entry.iov_base = data;
+ entry.iov_len = cfg_payload_len;
+ msg.msg_iov = &entry;
+ msg.msg_iovlen = 1;
+ msg.msg_name = NULL;
+ msg.msg_namelen = 0;
+ msg.msg_control = ctrl;
+ msg.msg_controllen = sizeof(ctrl);
+
+ ret = recvmsg(fd, &msg, MSG_ERRQUEUE);
+ if (ret == -1 && errno != EAGAIN)
+ error(1, errno, "recvmsg");
+
+ __recv_errmsg_cmsg(&msg, ret);
+
+ free(data);
+ return ret == -1;
+}
+
+static void do_test(int family, unsigned int opt)
+{
+ char *buf;
+ int fd, i, val, total_len;
+
+ if (family == IPPROTO_IPV6 && cfg_proto != SOCK_STREAM) {
+ /* due to lack of checksum generation code */
+ fprintf(stderr, "test: skipping datagram over IPv6\n");
+ return;
+ }
+
+ total_len = cfg_payload_len;
+ if (cfg_proto == SOCK_RAW) {
+ total_len += sizeof(struct udphdr);
+ if (cfg_ipproto == IPPROTO_RAW)
+ total_len += sizeof(struct iphdr);
+ }
+
+ buf = malloc(total_len);
+ if (!buf)
+ error(1, 0, "malloc");
+
+ fd = socket(family, cfg_proto, cfg_ipproto);
+ if (fd < 0)
+ error(1, errno, "socket");
+
+ if (cfg_proto == SOCK_STREAM) {
+ val = 1;
+ if (setsockopt(fd, IPPROTO_TCP, TCP_NODELAY,
+ (char*) &val, sizeof(val)))
+ error(1, 0, "setsockopt no nagle");
+
+ if (family == PF_INET) {
+ if (connect(fd, (void *) &daddr, sizeof(daddr)))
+ error(1, errno, "connect ipv4");
+ } else {
+ if (connect(fd, (void *) &daddr6, sizeof(daddr6)))
+ error(1, errno, "connect ipv6");
+ }
+ }
+
+ opt |= SOF_TIMESTAMPING_SOFTWARE |
+ SOF_TIMESTAMPING_OPT_ID;
+ if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING,
+ (char *) &opt, sizeof(opt)))
+ error(1, 0, "setsockopt timestamping");
+
+ for (i = 0; i < cfg_num_pkts; i++) {
+ memset(&ts_prev, 0, sizeof(ts_prev));
+ memset(buf, 'a' + i, total_len);
+ buf[total_len - 2] = '\n';
+ buf[total_len - 1] = '\0';
+
+ if (cfg_proto == SOCK_RAW) {
+ struct udphdr *udph;
+ int off = 0;
+
+ if (cfg_ipproto == IPPROTO_RAW) {
+ struct iphdr *iph = (void *) buf;
+
+ memset(iph, 0, sizeof(*iph));
+ iph->ihl = 5;
+ iph->version = 4;
+ iph->ttl = 2;
+ iph->daddr = daddr.sin_addr.s_addr;
+ iph->protocol = IPPROTO_UDP;
+ /* kernel writes saddr, csum, len */
+
+ off = sizeof(*iph);
+ }
+
+ udph = (void *) buf + off;
+ udph->source = ntohs(9000); /* random spoof */
+ udph->dest = ntohs(dest_port);
+ udph->len = ntohs(sizeof(*udph) + cfg_payload_len);
+ udph->check = 0; /* not allowed for IPv6 */
+ }
+
+ print_timestamp_usr();
+ if (cfg_proto != SOCK_STREAM) {
+ if (family == PF_INET)
+ val = sendto(fd, buf, total_len, 0, (void *) &daddr, sizeof(daddr));
+ else
+ val = sendto(fd, buf, total_len, 0, (void *) &daddr6, sizeof(daddr6));
+ } else {
+ val = send(fd, buf, cfg_payload_len, 0);
+ }
+ if (val != total_len)
+ error(1, errno, "send");
+
+ /* wait for all errors to be queued, else ACKs arrive OOO */
+ usleep(50 * 1000);
+
+ __poll(fd);
+
+ while (!recv_errmsg(fd)) {}
+ }
+
+ if (close(fd))
+ error(1, errno, "close");
+
+ free(buf);
+ usleep(400 * 1000);
+}
+
+static void __attribute__((noreturn)) usage(const char *filepath)
+{
+ fprintf(stderr, "\nUsage: %s [options] hostname\n"
+ "\nwhere options are:\n"
+ " -4: only IPv4\n"
+ " -6: only IPv6\n"
+ " -h: show this message\n"
+ " -l N: send N bytes at a time\n"
+ " -r: use raw\n"
+ " -R: use raw (IP_HDRINCL)\n"
+ " -p N: connect to port N\n"
+ " -u: use udp\n",
+ filepath);
+ exit(1);
+}
+
+static void parse_opt(int argc, char **argv)
+{
+ int proto_count = 0;
+ char c;
+
+ while ((c = getopt(argc, argv, "46hl:p:rRu")) != -1) {
+ switch (c) {
+ case '4':
+ do_ipv6 = 0;
+ break;
+ case '6':
+ do_ipv4 = 0;
+ break;
+ case 'r':
+ proto_count++;
+ cfg_proto = SOCK_RAW;
+ cfg_ipproto = IPPROTO_UDP;
+ break;
+ case 'R':
+ proto_count++;
+ cfg_proto = SOCK_RAW;
+ cfg_ipproto = IPPROTO_RAW;
+ break;
+ case 'u':
+ proto_count++;
+ cfg_proto = SOCK_DGRAM;
+ cfg_ipproto = IPPROTO_UDP;
+ break;
+ case 'l':
+ cfg_payload_len = strtoul(optarg, NULL, 10);
+ break;
+ case 'p':
+ dest_port = strtoul(optarg, NULL, 10);
+ break;
+ case 'h':
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if (!cfg_payload_len)
+ error(1, 0, "payload may not be nonzero");
+ if (cfg_proto != SOCK_STREAM && cfg_payload_len > 1472)
+ error(1, 0, "udp packet might exceed expected MTU");
+ if (!do_ipv4 && !do_ipv6)
+ error(1, 0, "pass -4 or -6, not both");
+ if (proto_count > 1)
+ error(1, 0, "pass -r, -R or -u, not multiple");
+
+ if (optind != argc - 1)
+ error(1, 0, "missing required hostname argument");
+}
+
+static void resolve_hostname(const char *hostname)
+{
+ struct addrinfo *addrs, *cur;
+ int have_ipv4 = 0, have_ipv6 = 0;
+
+ if (getaddrinfo(hostname, NULL, NULL, &addrs))
+ error(1, errno, "getaddrinfo");
+
+ cur = addrs;
+ while (cur && !have_ipv4 && !have_ipv6) {
+ if (!have_ipv4 && cur->ai_family == AF_INET) {
+ memcpy(&daddr, cur->ai_addr, sizeof(daddr));
+ daddr.sin_port = htons(dest_port);
+ have_ipv4 = 1;
+ }
+ else if (!have_ipv6 && cur->ai_family == AF_INET6) {
+ memcpy(&daddr6, cur->ai_addr, sizeof(daddr6));
+ daddr6.sin6_port = htons(dest_port);
+ have_ipv6 = 1;
+ }
+ cur = cur->ai_next;
+ }
+ if (addrs)
+ freeaddrinfo(addrs);
+
+ do_ipv4 &= have_ipv4;
+ do_ipv6 &= have_ipv6;
+}
+
+static void do_main(int family)
+{
+ fprintf(stderr, "family: %s\n",
+ family == PF_INET ? "INET" : "INET6");
+
+ fprintf(stderr, "test SND\n");
+ do_test(family, SOF_TIMESTAMPING_TX_SOFTWARE);
+
+ fprintf(stderr, "test ENQ\n");
+ do_test(family, SOF_TIMESTAMPING_TX_SCHED);
+
+ fprintf(stderr, "test ENQ + SND\n");
+ do_test(family, SOF_TIMESTAMPING_TX_SCHED |
+ SOF_TIMESTAMPING_TX_SOFTWARE);
+
+ if (cfg_proto == SOCK_STREAM) {
+ fprintf(stderr, "\ntest ACK\n");
+ do_test(family, SOF_TIMESTAMPING_TX_ACK);
+
+ fprintf(stderr, "\ntest SND + ACK\n");
+ do_test(family, SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_TX_ACK);
+
+ fprintf(stderr, "\ntest ENQ + SND + ACK\n");
+ do_test(family, SOF_TIMESTAMPING_TX_SCHED |
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_TX_ACK);
+ }
+}
+
+const char *sock_names[] = { NULL, "TCP", "UDP", "RAW" };
+
+int main(int argc, char **argv)
+{
+ if (argc == 1)
+ usage(argv[0]);
+
+ parse_opt(argc, argv);
+ resolve_hostname(argv[argc - 1]);
+
+ fprintf(stderr, "protocol: %s\n", sock_names[cfg_proto]);
+ fprintf(stderr, "payload: %u\n", cfg_payload_len);
+ fprintf(stderr, "server port: %u\n", dest_port);
+ fprintf(stderr, "\n");
+
+ if (do_ipv4)
+ do_main(PF_INET);
+ if (do_ipv6)
+ do_main(PF_INET6);
+
+ return 0;
+}
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 81c0e2b49cd8..8afb236ca765 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -143,8 +143,9 @@ This will cause the core to recalculate the total load on the regulator (based
on all its consumers) and change operating mode (if necessary and permitted)
to best match the current operating load.
-The load_uA value can be determined from the consumers datasheet. e.g.most
-datasheets have tables showing the max current consumed in certain situations.
+The load_uA value can be determined from the consumer's datasheet. e.g. most
+datasheets have tables showing the maximum current consumed in certain
+situations.
Most consumers will use indirect operating mode control since they have no
knowledge of the regulator or whether the regulator is shared with other
@@ -173,7 +174,7 @@ Consumers can register interest in regulator events by calling :-
int regulator_register_notifier(struct regulator *regulator,
struct notifier_block *nb);
-Consumers can uregister interest by calling :-
+Consumers can unregister interest by calling :-
int regulator_unregister_notifier(struct regulator *regulator,
struct notifier_block *nb);
diff --git a/Documentation/power/regulator/design.txt b/Documentation/power/regulator/design.txt
index f9b56b72b782..fdd919b96830 100644
--- a/Documentation/power/regulator/design.txt
+++ b/Documentation/power/regulator/design.txt
@@ -9,14 +9,14 @@ Safety
- Errors in regulator configuration can have very serious consequences
for the system, potentially including lasting hardware damage.
- - It is not possible to automatically determine the power confugration
+ - It is not possible to automatically determine the power configuration
of the system - software-equivalent variants of the same chip may
- have different power requirments, and not all components with power
+ have different power requirements, and not all components with power
requirements are visible to software.
=> The API should make no changes to the hardware state unless it has
- specific knowledge that these changes are safe to do perform on
- this particular system.
+ specific knowledge that these changes are safe to perform on this
+ particular system.
Consumer use cases
------------------
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index ce63af0a8e35..757e3b53dc11 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -11,7 +11,7 @@ Consider the following machine :-
+-> [Consumer B @ 3.3V]
The drivers for consumers A & B must be mapped to the correct regulator in
-order to control their power supply. This mapping can be achieved in machine
+order to control their power supplies. This mapping can be achieved in machine
initialisation code by creating a struct regulator_consumer_supply for
each regulator.
@@ -39,7 +39,7 @@ to the 'Vcc' supply for Consumer A.
Constraints can now be registered by defining a struct regulator_init_data
for each regulator power domain. This structure also maps the consumers
-to their supply regulator :-
+to their supply regulators :-
static struct regulator_init_data regulator1_data = {
.constraints = {
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index 8ed17587a74b..40ca2d6e2742 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -36,11 +36,11 @@ Some terms used in this document:-
Consumers can be classified into two types:-
Static: consumer does not change its supply voltage or
- current limit. It only needs to enable or disable it's
+ current limit. It only needs to enable or disable its
power supply. Its supply voltage is set by the hardware,
bootloader, firmware or kernel board initialisation code.
- Dynamic: consumer needs to change it's supply voltage or
+ Dynamic: consumer needs to change its supply voltage or
current limit to meet operation demands.
@@ -156,7 +156,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
This interface is for machine specific code and allows the creation of
voltage/current domains (with constraints) for each regulator. It can
provide regulator constraints that will prevent device damage through
- overvoltage or over current caused by buggy client drivers. It also
+ overvoltage or overcurrent caused by buggy client drivers. It also
allows the creation of a regulator tree whereby some regulators are
supplied by others (similar to a clock tree).
diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
index 13902778ae44..b17e5833ce21 100644
--- a/Documentation/power/regulator/regulator.txt
+++ b/Documentation/power/regulator/regulator.txt
@@ -13,7 +13,7 @@ Drivers can register a regulator by calling :-
struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
const struct regulator_config *config);
-This will register the regulators capabilities and operations to the regulator
+This will register the regulator's capabilities and operations to the regulator
core.
Regulators can be unregistered by calling :-
@@ -23,8 +23,8 @@ void regulator_unregister(struct regulator_dev *rdev);
Regulator Events
================
-Regulators can send events (e.g. over temp, under voltage, etc) to consumer
-drivers by calling :-
+Regulators can send events (e.g. overtemperature, undervoltage, etc) to
+consumer drivers by calling :-
int regulator_notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data);
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index 9a0319a82470..04892b821157 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -241,6 +241,9 @@ address of the router (or Connected) for internal networks.
6. TIPC
-------------------------------------------------------
+tipc_rmem
+----------
+
The TIPC protocol now has a tunable for the receive memory, similar to the
tcp_rmem - i.e. a vector of 3 INTEGERs: (min, default, max)
@@ -252,3 +255,16 @@ The max value is set to CONN_OVERLOAD_LIMIT, and the default and min values
are scaled (shifted) versions of that same value. Note that the min value
is not at this point in time used in any meaningful way, but the triplet is
preserved in order to be consistent with things like tcp_rmem.
+
+named_timeout
+--------------
+
+TIPC name table updates are distributed asynchronously in a cluster, without
+any form of transaction handling. This means that different race scenarios are
+possible. One such is that a name withdrawal sent out by one node and received
+by another node may arrive after a second, overlapping name publication already
+has been accepted from a third node, although the conflicting updates
+originally may have been issued in the correct sequential order.
+If named_timeout is nonzero, failed topology updates will be placed on a defer
+queue until another event arrives that clears the error, or until the timeout
+expires. Value is in milliseconds.
diff --git a/Documentation/this_cpu_ops.txt b/Documentation/this_cpu_ops.txt
index 1a4ce7e3e05f..0ec995712176 100644
--- a/Documentation/this_cpu_ops.txt
+++ b/Documentation/this_cpu_ops.txt
@@ -2,26 +2,26 @@ this_cpu operations
-------------------
this_cpu operations are a way of optimizing access to per cpu
-variables associated with the *currently* executing processor through
-the use of segment registers (or a dedicated register where the cpu
-permanently stored the beginning of the per cpu area for a specific
-processor).
+variables associated with the *currently* executing processor. This is
+done through the use of segment registers (or a dedicated register where
+the cpu permanently stored the beginning of the per cpu area for a
+specific processor).
-The this_cpu operations add a per cpu variable offset to the processor
-specific percpu base and encode that operation in the instruction
+this_cpu operations add a per cpu variable offset to the processor
+specific per cpu base and encode that operation in the instruction
operating on the per cpu variable.
-This means there are no atomicity issues between the calculation of
+This means that there are no atomicity issues between the calculation of
the offset and the operation on the data. Therefore it is not
-necessary to disable preempt or interrupts to ensure that the
+necessary to disable preemption or interrupts to ensure that the
processor is not changed between the calculation of the address and
the operation on the data.
Read-modify-write operations are of particular interest. Frequently
processors have special lower latency instructions that can operate
-without the typical synchronization overhead but still provide some
-sort of relaxed atomicity guarantee. The x86 for example can execute
-RMV (Read Modify Write) instructions like inc/dec/cmpxchg without the
+without the typical synchronization overhead, but still provide some
+sort of relaxed atomicity guarantees. The x86, for example, can execute
+RMW (Read Modify Write) instructions like inc/dec/cmpxchg without the
lock prefix and the associated latency penalty.
Access to the variable without the lock prefix is not synchronized but
@@ -30,6 +30,38 @@ data specific to the currently executing processor. Only the current
processor should be accessing that variable and therefore there are no
concurrency issues with other processors in the system.
+Please note that accesses by remote processors to a per cpu area are
+exceptional situations and may impact performance and/or correctness
+(remote write operations) of local RMW operations via this_cpu_*.
+
+The main use of the this_cpu operations has been to optimize counter
+operations.
+
+The following this_cpu() operations with implied preemption protection
+are defined. These operations can be used without worrying about
+preemption and interrupts.
+
+ this_cpu_add()
+ this_cpu_read(pcp)
+ this_cpu_write(pcp, val)
+ this_cpu_add(pcp, val)
+ this_cpu_and(pcp, val)
+ this_cpu_or(pcp, val)
+ this_cpu_add_return(pcp, val)
+ this_cpu_xchg(pcp, nval)
+ this_cpu_cmpxchg(pcp, oval, nval)
+ this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+ this_cpu_sub(pcp, val)
+ this_cpu_inc(pcp)
+ this_cpu_dec(pcp)
+ this_cpu_sub_return(pcp, val)
+ this_cpu_inc_return(pcp)
+ this_cpu_dec_return(pcp)
+
+
+Inner working of this_cpu operations
+------------------------------------
+
On x86 the fs: or the gs: segment registers contain the base of the
per cpu area. It is then possible to simply use the segment override
to relocate a per cpu relative address to the proper per cpu area for
@@ -48,22 +80,21 @@ results in a single instruction
mov ax, gs:[x]
instead of a sequence of calculation of the address and then a fetch
-from that address which occurs with the percpu operations. Before
+from that address which occurs with the per cpu operations. Before
this_cpu_ops such sequence also required preempt disable/enable to
prevent the kernel from moving the thread to a different processor
while the calculation is performed.
-The main use of the this_cpu operations has been to optimize counter
-operations.
+Consider the following this_cpu operation:
this_cpu_inc(x)
-results in the following single instruction (no lock prefix!)
+The above results in the following single instruction (no lock prefix!)
inc gs:[x]
instead of the following operations required if there is no segment
-register.
+register:
int *y;
int cpu;
@@ -73,10 +104,10 @@ register.
(*y)++;
put_cpu();
-Note that these operations can only be used on percpu data that is
+Note that these operations can only be used on per cpu data that is
reserved for a specific processor. Without disabling preemption in the
surrounding code this_cpu_inc() will only guarantee that one of the
-percpu counters is correctly incremented. However, there is no
+per cpu counters is correctly incremented. However, there is no
guarantee that the OS will not move the process directly before or
after the this_cpu instruction is executed. In general this means that
the value of the individual counters for each processor are
@@ -86,9 +117,9 @@ that is of interest.
Per cpu variables are used for performance reasons. Bouncing cache
lines can be avoided if multiple processors concurrently go through
the same code paths. Since each processor has its own per cpu
-variables no concurrent cacheline updates take place. The price that
+variables no concurrent cache line updates take place. The price that
has to be paid for this optimization is the need to add up the per cpu
-counters when the value of the counter is needed.
+counters when the value of a counter is needed.
Special operations:
@@ -100,33 +131,39 @@ Takes the offset of a per cpu variable (&x !) and returns the address
of the per cpu variable that belongs to the currently executing
processor. this_cpu_ptr avoids multiple steps that the common
get_cpu/put_cpu sequence requires. No processor number is
-available. Instead the offset of the local per cpu area is simply
-added to the percpu offset.
+available. Instead, the offset of the local per cpu area is simply
+added to the per cpu offset.
+Note that this operation is usually used in a code segment when
+preemption has been disabled. The pointer is then used to
+access local per cpu data in a critical section. When preemption
+is re-enabled this pointer is usually no longer useful since it may
+no longer point to per cpu data of the current processor.
Per cpu variables and offsets
-----------------------------
-Per cpu variables have *offsets* to the beginning of the percpu
+Per cpu variables have *offsets* to the beginning of the per cpu
area. They do not have addresses although they look like that in the
code. Offsets cannot be directly dereferenced. The offset must be
-added to a base pointer of a percpu area of a processor in order to
+added to a base pointer of a per cpu area of a processor in order to
form a valid address.
Therefore the use of x or &x outside of the context of per cpu
operations is invalid and will generally be treated like a NULL
pointer dereference.
-In the context of per cpu operations
+ DEFINE_PER_CPU(int, x);
- x is a per cpu variable. Most this_cpu operations take a cpu
- variable.
+In the context of per cpu operations the above implies that x is a per
+cpu variable. Most this_cpu operations take a cpu variable.
- &x is the *offset* a per cpu variable. this_cpu_ptr() takes
- the offset of a per cpu variable which makes this look a bit
- strange.
+ int __percpu *p = &x;
+&x and hence p is the *offset* of a per cpu variable. this_cpu_ptr()
+takes the offset of a per cpu variable which makes this look a bit
+strange.
Operations on a field of a per cpu structure
@@ -152,7 +189,7 @@ If we have an offset to struct s:
struct s __percpu *ps = &p;
- z = this_cpu_dec(ps->m);
+ this_cpu_dec(ps->m);
z = this_cpu_inc_return(ps->n);
@@ -172,29 +209,52 @@ if we do not make use of this_cpu ops later to manipulate fields:
Variants of this_cpu ops
-------------------------
-this_cpu ops are interrupt safe. Some architecture do not support
+this_cpu ops are interrupt safe. Some architectures do not support
these per cpu local operations. In that case the operation must be
replaced by code that disables interrupts, then does the operations
-that are guaranteed to be atomic and then reenable interrupts. Doing
+that are guaranteed to be atomic and then re-enable interrupts. Doing
so is expensive. If there are other reasons why the scheduler cannot
change the processor we are executing on then there is no reason to
-disable interrupts. For that purpose the __this_cpu operations are
-provided. For example.
-
- __this_cpu_inc(x);
-
-Will increment x and will not fallback to code that disables
+disable interrupts. For that purpose the following __this_cpu operations
+are provided.
+
+These operations have no guarantee against concurrent interrupts or
+preemption. If a per cpu variable is not used in an interrupt context
+and the scheduler cannot preempt, then they are safe. If any interrupts
+still occur while an operation is in progress and if the interrupt too
+modifies the variable, then RMW actions can not be guaranteed to be
+safe.
+
+ __this_cpu_add()
+ __this_cpu_read(pcp)
+ __this_cpu_write(pcp, val)
+ __this_cpu_add(pcp, val)
+ __this_cpu_and(pcp, val)
+ __this_cpu_or(pcp, val)
+ __this_cpu_add_return(pcp, val)
+ __this_cpu_xchg(pcp, nval)
+ __this_cpu_cmpxchg(pcp, oval, nval)
+ __this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+ __this_cpu_sub(pcp, val)
+ __this_cpu_inc(pcp)
+ __this_cpu_dec(pcp)
+ __this_cpu_sub_return(pcp, val)
+ __this_cpu_inc_return(pcp)
+ __this_cpu_dec_return(pcp)
+
+
+Will increment x and will not fall-back to code that disables
interrupts on platforms that cannot accomplish atomicity through
address relocation and a Read-Modify-Write operation in the same
instruction.
-
&this_cpu_ptr(pp)->n vs this_cpu_ptr(&pp->n)
--------------------------------------------
The first operation takes the offset and forms an address and then
-adds the offset of the n field.
+adds the offset of the n field. This may result in two add
+instructions emitted by the compiler.
The second one first adds the two offsets and then does the
relocation. IMHO the second form looks cleaner and has an easier time
@@ -202,4 +262,73 @@ with (). The second form also is consistent with the way
this_cpu_read() and friends are used.
-Christoph Lameter, April 3rd, 2013
+Remote access to per cpu data
+------------------------------
+
+Per cpu data structures are designed to be used by one cpu exclusively.
+If you use the variables as intended, this_cpu_ops() are guaranteed to
+be "atomic" as no other CPU has access to these data structures.
+
+There are special cases where you might need to access per cpu data
+structures remotely. It is usually safe to do a remote read access
+and that is frequently done to summarize counters. Remote write access
+something which could be problematic because this_cpu ops do not
+have lock semantics. A remote write may interfere with a this_cpu
+RMW operation.
+
+Remote write accesses to percpu data structures are highly discouraged
+unless absolutely necessary. Please consider using an IPI to wake up
+the remote CPU and perform the update to its per cpu area.
+
+To access per-cpu data structure remotely, typically the per_cpu_ptr()
+function is used:
+
+
+ DEFINE_PER_CPU(struct data, datap);
+
+ struct data *p = per_cpu_ptr(&datap, cpu);
+
+This makes it explicit that we are getting ready to access a percpu
+area remotely.
+
+You can also do the following to convert the datap offset to an address
+
+ struct data *p = this_cpu_ptr(&datap);
+
+but, passing of pointers calculated via this_cpu_ptr to other cpus is
+unusual and should be avoided.
+
+Remote access are typically only for reading the status of another cpus
+per cpu data. Write accesses can cause unique problems due to the
+relaxed synchronization requirements for this_cpu operations.
+
+One example that illustrates some concerns with write operations is
+the following scenario that occurs because two per cpu variables
+share a cache-line but the relaxed synchronization is applied to
+only one process updating the cache-line.
+
+Consider the following example
+
+
+ struct test {
+ atomic_t a;
+ int b;
+ };
+
+ DEFINE_PER_CPU(struct test, onecacheline);
+
+There is some concern about what would happen if the field 'a' is updated
+remotely from one processor and the local processor would use this_cpu ops
+to update field b. Care should be taken that such simultaneous accesses to
+data within the same cache line are avoided. Also costly synchronization
+may be necessary. IPIs are generally recommended in such scenarios instead
+of a remote write to the per cpu area of another processor.
+
+Even in cases where the remote writes are rare, please bear in
+mind that a remote write will evict the cache line from the processor
+that most likely will access it. If the processor wakes up and finds a
+missing local cache line of a per cpu area, its performance and hence
+the wake up times will be affected.
+
+Christoph Lameter, August 4th, 2014
+Pranith Kumar, Aug 2nd, 2014
diff --git a/Documentation/x86/tlb.txt b/Documentation/x86/tlb.txt
index 2b3a82e69151..39d172326703 100644
--- a/Documentation/x86/tlb.txt
+++ b/Documentation/x86/tlb.txt
@@ -35,7 +35,7 @@ invlpg instruction (or instructions _near_ it) show up high in
profiles. If you believe that individual invalidations being
called too often, you can lower the tunable:
- /sys/debug/kernel/x86/tlb_single_page_flush_ceiling
+ /sys/kernel/debug/x86/tlb_single_page_flush_ceiling
This will cause us to do the global flush for more cases.
Lowering it to 0 will disable the use of the individual flushes.
diff --git a/MAINTAINERS b/MAINTAINERS
index 0b7007a9c8a4..5e3709ebc234 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1277,9 +1277,15 @@ F: drivers/scsi/arm/
ARM/Rockchip SoC support
M: Heiko Stuebner <heiko@sntech.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-rockchip@lists.infradead.org
S: Maintained
+F: arch/arm/boot/dts/rk3*
F: arch/arm/mach-rockchip/
+F: drivers/clk/rockchip/
+F: drivers/i2c/busses/i2c-rk3x.c
F: drivers/*/*rockchip*
+F: drivers/*/*/*rockchip*
+F: sound/soc/rockchip/
ARM/SAMSUNG ARM ARCHITECTURES
M: Ben Dooks <ben-linux@fluff.org>
@@ -2065,7 +2071,7 @@ S: Supported
F: drivers/scsi/bnx2i/
BROADCOM KONA GPIO DRIVER
-M: Markus Mayer <markus.mayer@linaro.org>
+M: Ray Jui <rjui@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
S: Supported
F: drivers/gpio/gpio-bcm-kona.c
@@ -3121,6 +3127,17 @@ F: include/linux/host1x.h
F: include/uapi/drm/tegra_drm.h
F: Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+DRM DRIVERS FOR RENESAS
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L: dri-devel@lists.freedesktop.org
+L: linux-sh@vger.kernel.org
+T: git git://people.freedesktop.org/~airlied/linux
+S: Supported
+F: drivers/gpu/drm/rcar-du/
+F: drivers/gpu/drm/shmobile/
+F: include/linux/platform_data/rcar-du.h
+F: include/linux/platform_data/shmob_drm.h
+
DSBR100 USB FM RADIO DRIVER
M: Alexey Klimov <klimov.linux@gmail.com>
L: linux-media@vger.kernel.org
@@ -7362,7 +7379,7 @@ F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Shahed Shaikh <shahed.shaikh@qlogic.com>
-M: Dept-HSGLinuxNICDev@qlogic.com
+M: Dept-GELinuxNICDev@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/qlogic/qlcnic/
@@ -9546,6 +9563,14 @@ S: Maintained
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
+USB OVER IP DRIVER
+M: Valentina Manea <valentina.manea.m@gmail.com>
+M: Shuah Khan <shuah.kh@samsung.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: drivers/usb/usbip/
+F: tools/usb/usbip/
+
USB PEGASUS DRIVER
M: Petko Manolov <petkan@nucleusys.com>
L: linux-usb@vger.kernel.org
@@ -10046,9 +10071,9 @@ F: Documentation/x86/
F: arch/x86/
X86 PLATFORM DRIVERS
-M: Matthew Garrett <matthew.garrett@nebula.com>
+M: Darren Hart <dvhart@infradead.org>
L: platform-driver-x86@vger.kernel.org
-T: git git://cavan.codon.org.uk/platform-drivers-x86.git
+T: git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git
S: Maintained
F: drivers/platform/x86/
diff --git a/Makefile b/Makefile
index e43244263306..1a60bdd05c9a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 17
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 5ebab5895edb..f05bdb4b1cb9 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -500,10 +500,14 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
#define outb_p outb
#define outw_p outw
#define outl_p outl
-#define readb_relaxed(addr) __raw_readb(addr)
-#define readw_relaxed(addr) __raw_readw(addr)
-#define readl_relaxed(addr) __raw_readl(addr)
-#define readq_relaxed(addr) __raw_readq(addr)
+#define readb_relaxed(addr) __raw_readb(addr)
+#define readw_relaxed(addr) __raw_readw(addr)
+#define readl_relaxed(addr) __raw_readl(addr)
+#define readq_relaxed(addr) __raw_readq(addr)
+#define writeb_relaxed(b, addr) __raw_writeb(b, addr)
+#define writew_relaxed(b, addr) __raw_writew(b, addr)
+#define writel_relaxed(b, addr) __raw_writel(b, addr)
+#define writeq_relaxed(b, addr) __raw_writeq(b, addr)
#define mmiowb()
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index f2c94402e2c8..c509d306db45 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -3,7 +3,7 @@
#include <uapi/asm/unistd.h>
-#define NR_SYSCALLS 508
+#define NR_SYSCALLS 511
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_STAT64
diff --git a/arch/alpha/include/uapi/asm/unistd.h b/arch/alpha/include/uapi/asm/unistd.h
index 53ae7bb1bfd1..d214a0358100 100644
--- a/arch/alpha/include/uapi/asm/unistd.h
+++ b/arch/alpha/include/uapi/asm/unistd.h
@@ -469,5 +469,8 @@
#define __NR_process_vm_writev 505
#define __NR_kcmp 506
#define __NR_finit_module 507
+#define __NR_sched_setattr 508
+#define __NR_sched_getattr 509
+#define __NR_renameat2 510
#endif /* _UAPI_ALPHA_UNISTD_H */
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index dca9b3fb0071..24789713f1ea 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -526,6 +526,9 @@ sys_call_table:
.quad sys_process_vm_writev /* 505 */
.quad sys_kcmp
.quad sys_finit_module
+ .quad sys_sched_setattr
+ .quad sys_sched_getattr
+ .quad sys_renameat2 /* 510 */
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 4670afc3b971..9e1142729fd1 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -427,7 +427,7 @@ struct ic_inv_args {
static void __ic_line_inv_vaddr_helper(void *info)
{
- struct ic_inv *ic_inv_args = (struct ic_inv_args *) info;
+ struct ic_inv_args *ic_inv = info;
__ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
}
@@ -581,6 +581,7 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
tot_sz -= sz;
}
}
+EXPORT_SYMBOL(flush_icache_range);
/*
* General purpose helper to make I and D cache lines consistent.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c49a775937db..32cbbd565902 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1983,8 +1983,6 @@ config XIP_PHYS_ADDR
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on (!SMP || PM_SLEEP_SMP)
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 9b3d2ba82f13..8689949bdba3 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -804,7 +804,7 @@
usb1: usb@48390000 {
compatible = "synopsys,dwc3";
- reg = <0x48390000 0x17000>;
+ reg = <0x48390000 0x10000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
@@ -826,7 +826,7 @@
usb2: usb@483d0000 {
compatible = "synopsys,dwc3";
- reg = <0x483d0000 0x17000>;
+ reg = <0x483d0000 0x10000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 646a6eade788..e7ac47fa6615 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -260,7 +260,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
tps65218: tps65218@24 {
reg = <0x24>;
@@ -424,7 +424,7 @@
ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
reg = <0 0 4>; /* device IO registers */
- ti,nand-ecc-opt = "bch8";
+ ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
@@ -443,8 +443,6 @@
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
gpmc,wait-pin = <0>;
- gpmc,wait-on-read;
- gpmc,wait-on-write;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ed7dd2395915..ac3e4859935f 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -435,13 +435,13 @@
};
&gpmc {
- status = "okay";
+ status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
- ti,nand-ecc-opt = "bch8";
+ ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
@@ -459,8 +459,7 @@
gpmc,access-ns = <30>; /* tCEA + 4*/
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
- gpmc,wait-on-read = "true";
- gpmc,wait-on-write = "true";
+ gpmc,wait-pin = <0>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
@@ -557,7 +556,7 @@
};
&qspi {
- status = "okay";
+ status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */
pinctrl-names = "default";
pinctrl-0 = <&qspi1_default>;
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 65ccf564b9a5..6c97d4af61ee 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -149,7 +149,7 @@
usb: usbck {
compatible = "atmel,at91rm9200-clk-usb";
#clock-cells = <0>;
- atmel,clk-divisors = <1 2>;
+ atmel,clk-divisors = <1 2 0 0>;
clocks = <&pllb>;
};
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 31f7652612fc..4e0abbd9d655 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -40,6 +40,7 @@
};
pllb: pllbck {
+ compatible = "atmel,at91sam9g20-clk-pllb";
atmel,clk-input-range = <2000000 32000000>;
atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 50f8022905a1..e03fbf3c6889 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "TI DRA742";
@@ -24,9 +25,29 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ vtt_fixed: fixedregulator-vtt {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ };
};
&dra7_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vtt_pin>;
+
+ vtt_pin: pinmux_vtt_pin {
+ pinctrl-single,pins = <
+ 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+ >;
+ };
+
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
@@ -43,20 +64,19 @@
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
- 0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+ 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
- 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
- 0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
- 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
- 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
- 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
- 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+ 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+ 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+ 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+ 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+ 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+ 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
>;
};
@@ -284,7 +304,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
- clock-frequency = <3400000>;
+ clock-frequency = <400000>;
};
&mcspi1 {
@@ -483,7 +503,7 @@
reg = <0x001c0000 0x00020000>;
};
partition@7 {
- label = "NAND.u-boot-env";
+ label = "NAND.u-boot-env.backup1";
reg = <0x001e0000 0x00020000>;
};
partition@8 {
@@ -504,3 +524,8 @@
&usb2_phy2 {
phy-supply = <&ldousb_reg>;
};
+
+&gpio7 {
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 97f603c4483d..d678152db4cb 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -245,7 +245,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
@@ -256,7 +256,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
@@ -267,7 +267,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
@@ -278,7 +278,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
@@ -289,7 +289,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
@@ -300,7 +300,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio@48051000 {
@@ -311,7 +311,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio8: gpio@48053000 {
@@ -322,7 +322,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 6d6d23c83d30..adadaf97ac01 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -134,6 +134,8 @@
i2c@13860000 {
pinctrl-0 = <&i2c0_bus>;
pinctrl-names = "default";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <400000>;
status = "okay";
usb3503: usb3503@08 {
@@ -148,6 +150,10 @@
max77686: pmic@09 {
compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
reg = <0x09>;
#clock-cells = <1>;
@@ -368,4 +374,11 @@
samsung,pins = "gpx1-3";
samsung,pin-pud = <0>;
};
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index f1bbf9a32991..82d623d05915 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -28,6 +28,12 @@
MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
>;
};
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */
+ >;
+ };
};
};
@@ -38,6 +44,8 @@
pmic: mc34708@8 {
compatible = "fsl,mc34708";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <23 0x8>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 64fa27b36be0..c6c58c1c00e3 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -731,7 +731,7 @@
compatible = "fsl,imx53-vpu";
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
- clocks = <&clks IMX5_CLK_VPU_GATE>,
+ clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
<&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
resets = <&src 1>;
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index c8e51dd41b8f..71598546087f 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -58,7 +58,7 @@
sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
+ model = "On-board SPDIF";
/* IMX6 doesn't implement this yet */
spdif-controller = <&spdif>;
spdif-out;
@@ -181,11 +181,13 @@
};
&usbh1 {
+ disable-over-current;
vbus-supply = <&reg_usbh1_vbus>;
status = "okay";
};
&usbotg {
+ disable-over-current;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 8c1cb53464a0..4fa254347798 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -119,7 +119,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
+ phy-reset-gpios = <&gpio1 25 0>;
phy-supply = <&vgen2_1v2_eth>;
status = "okay";
};
@@ -339,6 +339,7 @@
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index e8e781656b3f..6a524ca011e7 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -61,7 +61,7 @@
sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
+ model = "Integrated SPDIF";
/* IMX6 doesn't implement this yet */
spdif-controller = <&spdif>;
spdif-out;
@@ -130,16 +130,23 @@
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
+ pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+ fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+ };
+
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
};
- pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+ pinctrl_cubox_i_usbotg: cubox-i-usbotg {
/*
- * The Cubox-i pulls this low, but as it's pointless
+ * The Cubox-i pulls ID low, but as it's pointless
* leaving it as a pull-up, even if it is just 10uA.
*/
- fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ >;
};
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@
};
&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
vbus-supply = <&reg_usbh1_vbus>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+ pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
index d16066608e21..db9f45b2c573 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
@@ -17,7 +17,7 @@
enet {
pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
/* AR8035 reset */
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
index 3e0b816dac08..bb9c6b78cb97 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -78,7 +78,7 @@
#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1
#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0
#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0
#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0
#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0
#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0
@@ -96,7 +96,7 @@
#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0
#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0
#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0
#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0
#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0
#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0
@@ -213,7 +213,7 @@
#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1
#define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2
#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0
#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0
#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0
#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0
@@ -254,7 +254,7 @@
#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0
#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1
#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0
#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0
#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0
#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0
@@ -352,7 +352,7 @@
#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0
#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1
#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0
#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1
#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0
#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0
@@ -404,7 +404,7 @@
#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0
#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0
#define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0
#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0
#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0
#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0
@@ -423,7 +423,7 @@
#define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0
#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0
#define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0
#define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1
#define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1
#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0
@@ -815,7 +815,7 @@
#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0
#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0
#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0
#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0
#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0
#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0
@@ -957,7 +957,7 @@
#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0
#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0
#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0
#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1
#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2
#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1
@@ -1236,7 +1236,7 @@
#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1
#define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0
#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0
#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0
#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0
#define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0
@@ -1315,7 +1315,7 @@
#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0
#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0
#define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0
#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0
#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0
#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0
@@ -1409,7 +1409,7 @@
#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0
#define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0
#define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0
#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0
#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0
#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0
@@ -1510,7 +1510,7 @@
#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0
#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0
#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0
#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0
#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0
#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3c3e6da1deac..a9aae88b74f5 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -292,6 +292,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
&gpio1 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b15f1a77d684..1fe45d1f75ec 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -353,7 +353,7 @@
};
twl_power: power {
- compatible = "ti,twl4030-power-n900";
+ compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
ti,use_poweroff;
};
};
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 02f69f4a8fd3..9bad94efe1c8 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -107,7 +107,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <1 0 0x08000000>;
- ti,nand-ecc-opt = "ham1";
+ ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index e47ff69dcf70..5c375003bad1 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -467,6 +467,7 @@
ti,bit-shift = <0x1e>;
reg = <0x0d00>;
ti,set-bit-to-disable;
+ ti,set-rate-parent;
};
dpll4_m6_ck: dpll4_m6_ck {
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index e67a23b5d788..58c27466f012 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -367,10 +367,12 @@
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,divider-clock";
+ ti,max-div = <2>;
+ ti,bit-shift = <4>;
+ reg = <0x100>;
clocks = <&dpll_core_h12x2_ck>;
- clock-mult = <1>;
- clock-div = <1>;
+ ti,index-power-of-two;
};
gpu_l3_iclk: gpu_l3_iclk {
@@ -383,10 +385,12 @@
l4_root_clk_div: l4_root_clk_div {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,divider-clock";
+ ti,max-div = <2>;
+ ti,bit-shift = <8>;
+ reg = <0x100>;
clocks = <&l3_iclk_div>;
- clock-mult = <1>;
- clock-div = <1>;
+ ti,index-power-of-two;
};
slimbus1_slimbus_clk: slimbus1_slimbus_clk {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 23486c081a69..be59014474b2 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -275,11 +275,6 @@
renesas,function = "msiof0";
};
- i2c6_pins: i2c6 {
- renesas,groups = "i2c6";
- renesas,function = "i2c6";
- };
-
usb0_pins: usb0 {
renesas,groups = "usb0";
renesas,function = "usb0";
@@ -420,8 +415,6 @@
};
&i2c6 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 042f821d9e4d..c9d912da6141 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -149,6 +149,8 @@
&mmc0 { /* sdmmc */
num-slots = <1>;
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
slot@0 {
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 171b610db709..5e4e3c238b2d 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -179,6 +179,8 @@
&mmc0 {
num-slots = <1>;
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
slot@0 {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 4a2000c620ad..3e97a669f15e 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -116,7 +116,6 @@
msp2: msp@80117000 {
pinctrl-names = "default";
pinctrl-0 = <&msp2_default_mode>;
- status = "okay";
};
msp3: msp@80125000 {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 44b07e512c24..e06fbfc55bb7 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -660,6 +660,8 @@
clock-frequency = <100000>;
resets = <&apb2_rst 0>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c1: i2c@01c2b000 {
@@ -670,6 +672,8 @@
clock-frequency = <100000>;
resets = <&apb2_rst 1>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@01c2b400 {
@@ -680,6 +684,8 @@
clock-frequency = <100000>;
resets = <&apb2_rst 2>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c3: i2c@01c2b800 {
@@ -690,6 +696,8 @@
clock-frequency = <100000>;
resets = <&apb2_rst 3>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
gmac: ethernet@01c30000 {
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 8adaa7871dd3..a5446cba9804 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -423,7 +423,7 @@
vcc4-supply = <&sys_3v3_reg>;
vcc5-supply = <&sys_3v3_reg>;
vcc6-supply = <&vio_reg>;
- vcc7-supply = <&sys_5v0_reg>;
+ vcc7-supply = <&charge_pump_5v0_reg>;
vccio-supply = <&sys_3v3_reg>;
regulators {
@@ -674,5 +674,14 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ charge_pump_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index bf16f8e65627..c4ed1bec4d92 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -201,7 +201,7 @@
vcc4-supply = <&sys_3v3_reg>;
vcc5-supply = <&sys_3v3_reg>;
vcc6-supply = <&vio_reg>;
- vcc7-supply = <&sys_5v0_reg>;
+ vcc7-supply = <&charge_pump_5v0_reg>;
vccio-supply = <&sys_3v3_reg>;
regulators {
@@ -373,5 +373,14 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ charge_pump_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 2e3bd3172b23..55eb35f068fb 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -83,10 +83,6 @@
regulator-always-on;
};
- clk32kg: regulator-clk32kg {
- compatible = "ti,twl6030-clk32kg";
- };
-
twl_usb_comparator: usb-comparator {
compatible = "ti,twl6030-usb";
interrupts = <4>, <10>;
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 11d733406c7e..b8a5e8c68f06 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -168,7 +168,7 @@
};
pinctrl_esdhc1: esdhc1grp {
- fsl,fsl,pins = <
+ fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 88099175fc56..d86771abbf57 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -1443,14 +1443,14 @@ void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
EXPORT_SYMBOL(edma_assign_channel_eventq);
static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
- struct edma *edma_cc)
+ struct edma *edma_cc, int cc_id)
{
int i;
u32 value, cccfg;
s8 (*queue_priority_map)[2];
/* Decode the eDMA3 configuration from CCCFG register */
- cccfg = edma_read(0, EDMA_CCCFG);
+ cccfg = edma_read(cc_id, EDMA_CCCFG);
value = GET_NUM_REGN(cccfg);
edma_cc->num_region = BIT(value);
@@ -1464,7 +1464,8 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
value = GET_NUM_EVQUE(cccfg);
edma_cc->num_tc = value + 1;
- dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg);
+ dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id,
+ cccfg);
dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
@@ -1684,7 +1685,7 @@ static int edma_probe(struct platform_device *pdev)
return -ENOMEM;
/* Get eDMA3 configuration from IP */
- ret = edma_setup_from_hw(dev, info[j], edma_cc[j]);
+ ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j);
if (ret)
return ret;
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index fd43f7f55b70..79ecb4f34ffb 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -472,7 +472,6 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
"mcr p15, 0, r0, c1, c0, 0 @ set SCTLR \n\t" \
"isb \n\t" \
"bl v7_flush_dcache_"__stringify(level)" \n\t" \
- "clrex \n\t" \
"mrc p15, 0, r0, c1, c0, 1 @ get ACTLR \n\t" \
"bic r0, r0, #(1 << 6) @ disable local coherency \n\t" \
"mcr p15, 0, r0, c1, c0, 1 @ set ACTLR \n\t" \
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 963a2515906d..819777d0e91f 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -74,6 +74,7 @@
#define ARM_CPU_PART_CORTEX_A12 0x4100c0d0
#define ARM_CPU_PART_CORTEX_A17 0x4100c0e0
#define ARM_CPU_PART_CORTEX_A15 0x4100c0f0
+#define ARM_CPU_PART_MASK 0xff00fff0
#define ARM_CPU_XSCALE_ARCH_MASK 0xe000
#define ARM_CPU_XSCALE_ARCH_V1 0x2000
@@ -179,7 +180,7 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void)
*/
static inline unsigned int __attribute_const__ read_cpuid_part(void)
{
- return read_cpuid_id() & 0xff00fff0;
+ return read_cpuid_id() & ARM_CPU_PART_MASK;
}
static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void)
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index f4b46d39b9cf..afb9cafd3786 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t;
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
+#define R_ARM_TARGET1 38
#define R_ARM_V4BX 40
#define R_ARM_PREL31 42
#define R_ARM_MOVW_ABS_NC 43
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index a252c0bfacf5..0ad7d490ee6f 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -8,6 +8,7 @@
#include <linux/cpumask.h>
#include <linux/err.h>
+#include <asm/cpu.h>
#include <asm/cputype.h>
/*
@@ -25,6 +26,20 @@ static inline bool is_smp(void)
#endif
}
+/**
+ * smp_cpuid_part() - return part id for a given cpu
+ * @cpu: logical cpu id.
+ *
+ * Return: part id of logical cpu passed as argument.
+ */
+static inline unsigned int smp_cpuid_part(int cpu)
+{
+ struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpu);
+
+ return is_smp() ? cpu_info->cpuid & ARM_CPU_PART_MASK :
+ read_cpuid_part();
+}
+
/* all SMP configurations have the extended CPUID registers */
#ifndef CONFIG_MMU
#define tlb_ops_need_broadcast() 0
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 8db307d0954b..2fdf8679b46e 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -208,26 +208,21 @@
#endif
.endif
msr spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_V6)
- ldr r0, [sp]
- strex r1, r2, [sp] @ clear the exclusive monitor
- ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
-#elif defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
-#else
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ sub r0, sp, #4 @ uninhabited address
+ strex r1, r2, [r0] @ clear the exclusive monitor
#endif
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.endm
.macro restore_user_regs, fast = 0, offset = 0
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
strex r1, r2, [sp] @ clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
@@ -261,7 +256,10 @@
.endif
ldr lr, [sp, #S_SP] @ top of the stack
ldrd r0, r1, [sp, #S_LR] @ calling lr and pc
- clrex @ clear the exclusive monitor
+
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ strex r2, r1, [sp, #S_LR] @ clear the exclusive monitor
+
stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context
ldmia sp, {r0 - r12}
mov sp, lr
@@ -282,13 +280,16 @@
.endm
#else /* ifdef CONFIG_CPU_V7M */
.macro restore_user_regs, fast = 0, offset = 0
- clrex @ clear the exclusive monitor
mov r2, sp
load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC] @ get pc
add sp, sp, #\offset + S_SP
msr spsr_cxsf, r1 @ save in spsr_svc
+
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ strex r1, r2, [sp] @ clear the exclusive monitor
+
.if \fast
ldmdb sp, {r1 - r12} @ get calling r1 - r12
.else
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 45e478157278..6a4dffefd357 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -91,6 +91,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
break;
case R_ARM_ABS32:
+ case R_ARM_TARGET1:
*(u32 *)loc += sym->st_value;
break;
diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c
index 4c979d466cc1..a96a8043277c 100644
--- a/arch/arm/kvm/handle_exit.c
+++ b/arch/arm/kvm/handle_exit.c
@@ -93,6 +93,8 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
else
kvm_vcpu_block(vcpu);
+ kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+
return 1;
}
diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S
index 991415d978b6..3988e72d16ff 100644
--- a/arch/arm/kvm/init.S
+++ b/arch/arm/kvm/init.S
@@ -99,6 +99,10 @@ __do_hyp_init:
mrc p15, 0, r0, c10, c2, 1
mcr p15, 4, r0, c10, c2, 1
+ @ Invalidate the stale TLBs from Bootloader
+ mcr p15, 4, r0, c8, c7, 0 @ TLBIALLH
+ dsb ish
+
@ Set the HSCTLR to:
@ - ARM/THUMB exceptions: Kernel config (Thumb-2 kernel)
@ - Endianness: Kernel config
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c
index 3a185faee795..f4b6e91843e4 100644
--- a/arch/arm/mach-at91/board-dt-rm9200.c
+++ b/arch/arm/mach-at91/board-dt-rm9200.c
@@ -14,6 +14,7 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/clk-provider.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -35,13 +36,21 @@ static void __init at91rm9200_dt_init_irq(void)
of_irq_init(irq_of_match);
}
+static void __init at91rm9200_dt_timer_init(void)
+{
+#if defined(CONFIG_COMMON_CLK)
+ of_clk_init(NULL);
+#endif
+ at91rm9200_timer_init();
+}
+
static const char *at91rm9200_dt_board_compat[] __initdata = {
"atmel,at91rm9200",
NULL
};
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
- .init_time = at91rm9200_timer_init,
+ .init_time = at91rm9200_dt_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = at91rm9200_dt_initialize,
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 67c492aabf4d..b19a39652545 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -36,5 +36,4 @@ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
ifeq ($(CONFIG_ARCH_BRCMSTB),y)
obj-y += brcmstb.o
-obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o
endif
diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h
deleted file mode 100644
index ec0c3d112b36..000000000000
--- a/arch/arm/mach-bcm/brcmstb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __BRCMSTB_H__
-#define __BRCMSTB_H__
-
-void brcmstb_secondary_startup(void);
-
-#endif /* __BRCMSTB_H__ */
diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S
deleted file mode 100644
index 199c1ea58248..000000000000
--- a/arch/arm/mach-bcm/headsmp-brcmstb.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * SMP boot code for secondary CPUs
- * Based on arch/arm/mach-tegra/headsmp.S
- *
- * Copyright (C) 2010 NVIDIA, Inc.
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/assembler.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- .section ".text.head", "ax"
-
-ENTRY(brcmstb_secondary_startup)
- /*
- * Ensure CPU is in a sane state by disabling all IRQs and switching
- * into SVC mode.
- */
- setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
-
- bl v7_invalidate_l1
- b secondary_startup
-ENDPROC(brcmstb_secondary_startup)
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
deleted file mode 100644
index af780e9c23a6..000000000000
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Broadcom STB CPU SMP and hotplug support for ARM
- *
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/printk.h>
-#include <linux/regmap.h>
-#include <linux/smp.h>
-#include <linux/mfd/syscon.h>
-#include <linux/spinlock.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/mach-types.h>
-#include <asm/smp_plat.h>
-
-#include "brcmstb.h"
-
-enum {
- ZONE_MAN_CLKEN_MASK = BIT(0),
- ZONE_MAN_RESET_CNTL_MASK = BIT(1),
- ZONE_MAN_MEM_PWR_MASK = BIT(4),
- ZONE_RESERVED_1_MASK = BIT(5),
- ZONE_MAN_ISO_CNTL_MASK = BIT(6),
- ZONE_MANUAL_CONTROL_MASK = BIT(7),
- ZONE_PWR_DN_REQ_MASK = BIT(9),
- ZONE_PWR_UP_REQ_MASK = BIT(10),
- ZONE_BLK_RST_ASSERT_MASK = BIT(12),
- ZONE_PWR_OFF_STATE_MASK = BIT(25),
- ZONE_PWR_ON_STATE_MASK = BIT(26),
- ZONE_DPG_PWR_STATE_MASK = BIT(28),
- ZONE_MEM_PWR_STATE_MASK = BIT(29),
- ZONE_RESET_STATE_MASK = BIT(31),
- CPU0_PWR_ZONE_CTRL_REG = 1,
- CPU_RESET_CONFIG_REG = 2,
-};
-
-static void __iomem *cpubiuctrl_block;
-static void __iomem *hif_cont_block;
-static u32 cpu0_pwr_zone_ctrl_reg;
-static u32 cpu_rst_cfg_reg;
-static u32 hif_cont_reg;
-
-#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
-
-static int per_cpu_sw_state_rd(u32 cpu)
-{
- sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
- return per_cpu(per_cpu_sw_state, cpu);
-}
-
-static void per_cpu_sw_state_wr(u32 cpu, int val)
-{
- per_cpu(per_cpu_sw_state, cpu) = val;
- dmb();
- sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
- dsb_sev();
-}
-#else
-static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
-#endif
-
-static void __iomem *pwr_ctrl_get_base(u32 cpu)
-{
- void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
- base += (cpu_logical_map(cpu) * 4);
- return base;
-}
-
-static u32 pwr_ctrl_rd(u32 cpu)
-{
- void __iomem *base = pwr_ctrl_get_base(cpu);
- return readl_relaxed(base);
-}
-
-static void pwr_ctrl_wr(u32 cpu, u32 val)
-{
- void __iomem *base = pwr_ctrl_get_base(cpu);
- writel(val, base);
-}
-
-static void cpu_rst_cfg_set(u32 cpu, int set)
-{
- u32 val;
- val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
- if (set)
- val |= BIT(cpu_logical_map(cpu));
- else
- val &= ~BIT(cpu_logical_map(cpu));
- writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
-}
-
-static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
-{
- const int reg_ofs = cpu_logical_map(cpu) * 8;
- writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
- writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
-}
-
-static void brcmstb_cpu_boot(u32 cpu)
-{
- pr_info("SMP: Booting CPU%d...\n", cpu);
-
- /*
- * set the reset vector to point to the secondary_startup
- * routine
- */
- cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
-
- /* unhalt the cpu */
- cpu_rst_cfg_set(cpu, 0);
-}
-
-static void brcmstb_cpu_power_on(u32 cpu)
-{
- /*
- * The secondary cores power was cut, so we must go through
- * power-on initialization.
- */
- u32 tmp;
-
- pr_info("SMP: Powering up CPU%d...\n", cpu);
-
- /* Request zone power up */
- pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
-
- /* Wait for the power up FSM to complete */
- do {
- tmp = pwr_ctrl_rd(cpu);
- } while (!(tmp & ZONE_PWR_ON_STATE_MASK));
-
- per_cpu_sw_state_wr(cpu, 1);
-}
-
-static int brcmstb_cpu_get_power_state(u32 cpu)
-{
- int tmp = pwr_ctrl_rd(cpu);
- return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void brcmstb_cpu_die(u32 cpu)
-{
- v7_exit_coherency_flush(all);
-
- /* Prevent all interrupts from reaching this CPU. */
- arch_local_irq_disable();
-
- /*
- * Final full barrier to ensure everything before this instruction has
- * quiesced.
- */
- isb();
- dsb();
-
- per_cpu_sw_state_wr(cpu, 0);
-
- /* Sit and wait to die */
- wfi();
-
- /* We should never get here... */
- panic("Spurious interrupt on CPU %d received!\n", cpu);
-}
-
-static int brcmstb_cpu_kill(u32 cpu)
-{
- u32 tmp;
-
- pr_info("SMP: Powering down CPU%d...\n", cpu);
-
- while (per_cpu_sw_state_rd(cpu))
- ;
-
- /* Program zone reset */
- pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
- ZONE_PWR_DN_REQ_MASK);
-
- /* Verify zone reset */
- tmp = pwr_ctrl_rd(cpu);
- if (!(tmp & ZONE_RESET_STATE_MASK))
- pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
- __func__, cpu);
-
- /* Wait for power down */
- do {
- tmp = pwr_ctrl_rd(cpu);
- } while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
-
- /* Settle-time from Broadcom-internal DVT reference code */
- udelay(7);
-
- /* Assert reset on the CPU */
- cpu_rst_cfg_set(cpu, 1);
-
- return 1;
-}
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
-static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
-{
- int rc = 0;
- char *name;
- struct device_node *syscon_np = NULL;
-
- name = "syscon-cpu";
-
- syscon_np = of_parse_phandle(np, name, 0);
- if (!syscon_np) {
- pr_err("can't find phandle %s\n", name);
- rc = -EINVAL;
- goto cleanup;
- }
-
- cpubiuctrl_block = of_iomap(syscon_np, 0);
- if (!cpubiuctrl_block) {
- pr_err("iomap failed for cpubiuctrl_block\n");
- rc = -EINVAL;
- goto cleanup;
- }
-
- rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
- &cpu0_pwr_zone_ctrl_reg);
- if (rc) {
- pr_err("failed to read 1st entry from %s property (%d)\n", name,
- rc);
- rc = -EINVAL;
- goto cleanup;
- }
-
- rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
- &cpu_rst_cfg_reg);
- if (rc) {
- pr_err("failed to read 2nd entry from %s property (%d)\n", name,
- rc);
- rc = -EINVAL;
- goto cleanup;
- }
-
-cleanup:
- if (syscon_np)
- of_node_put(syscon_np);
-
- return rc;
-}
-
-static int __init setup_hifcont_regs(struct device_node *np)
-{
- int rc = 0;
- char *name;
- struct device_node *syscon_np = NULL;
-
- name = "syscon-cont";
-
- syscon_np = of_parse_phandle(np, name, 0);
- if (!syscon_np) {
- pr_err("can't find phandle %s\n", name);
- rc = -EINVAL;
- goto cleanup;
- }
-
- hif_cont_block = of_iomap(syscon_np, 0);
- if (!hif_cont_block) {
- pr_err("iomap failed for hif_cont_block\n");
- rc = -EINVAL;
- goto cleanup;
- }
-
- /* offset is at top of hif_cont_block */
- hif_cont_reg = 0;
-
-cleanup:
- if (syscon_np)
- of_node_put(syscon_np);
-
- return rc;
-}
-
-static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
-{
- int rc;
- struct device_node *np;
- char *name;
-
- name = "brcm,brcmstb-smpboot";
- np = of_find_compatible_node(NULL, NULL, name);
- if (!np) {
- pr_err("can't find compatible node %s\n", name);
- return;
- }
-
- rc = setup_hifcpubiuctrl_regs(np);
- if (rc)
- return;
-
- rc = setup_hifcont_regs(np);
- if (rc)
- return;
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static void brcmstb_secondary_init(unsigned int cpu)
-{
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- /*
- * set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /* Bring up power to the core if necessary */
- if (brcmstb_cpu_get_power_state(cpu) == 0)
- brcmstb_cpu_power_on(cpu);
-
- brcmstb_cpu_boot(cpu);
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return 0;
-}
-
-static struct smp_operations brcmstb_smp_ops __initdata = {
- .smp_prepare_cpus = brcmstb_cpu_ctrl_setup,
- .smp_secondary_init = brcmstb_secondary_init,
- .smp_boot_secondary = brcmstb_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_kill = brcmstb_cpu_kill,
- .cpu_die = brcmstb_cpu_die,
-#endif
-};
-
-CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index b2f8b60cf0e9..dc9a764a7c37 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -43,7 +43,6 @@
"mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \
"isb\n\t"\
"bl v7_flush_dcache_"__stringify(level)"\n\t" \
- "clrex\n\t"\
"mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \
"bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \
/* Dummy Load of a device register to avoid Erratum 799270 */ \
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 9de84a215abd..be9a51afe05a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -85,7 +85,6 @@ config SOC_IMX25
config SOC_IMX27
bool
- select ARCH_HAS_OPP
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -659,7 +658,6 @@ comment "Device tree only"
config SOC_IMX5
bool
- select ARCH_HAS_OPP
select HAVE_IMX_SRC
select MXC_TZIC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ac88599ca080..23c02932bf84 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -93,9 +93,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+ifdef CONFIG_SOC_IMX6
AFLAGS_headsmp.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+endif
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 6cceb7765c14..29d412975aff 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -194,6 +194,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ if (cpu_is_imx6dl()) {
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
+ }
clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
@@ -217,8 +221,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ if (cpu_is_imx6q()) {
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ }
clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index 74b50f1982db..ca4ea2daf25b 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -173,6 +173,8 @@ ENTRY(imx6_suspend)
ldr r6, [r11, #0x0]
ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
ldr r6, [r11, #0x0]
+ ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+ ldr r6, [r11, #0x0]
/* use r11 to store the IO address */
ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index e87f2a83d6bf..2d245c2e641c 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
- board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
+ board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 8897ad7035fd..cb7764314f17 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -49,7 +49,8 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
return 0;
/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
- if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
+ if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
+ ecc_opt == OMAP_ECC_HAM1_CODE_SW)
return 1;
else
return 0;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 8bc13380f0a0..2f97228f188a 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1207,8 +1207,7 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
}
}
- if ((p->wait_on_read || p->wait_on_write) &&
- (p->wait_pin > gpmc_nr_waitpins)) {
+ if (p->wait_pin > gpmc_nr_waitpins) {
pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
return -EINVAL;
}
@@ -1288,8 +1287,8 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
p->wait_on_write = of_property_read_bool(np,
"gpmc,wait-on-write");
if (!p->wait_on_read && !p->wait_on_write)
- pr_warn("%s: read/write wait monitoring not enabled!\n",
- __func__);
+ pr_debug("%s: rd/wr wait monitoring not enabled!\n",
+ __func__);
}
}
@@ -1403,8 +1402,11 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
return -ENODEV;
}
- if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
- !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+
+ if (!strcmp(s, "sw"))
+ gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+ else if (!strcmp(s, "ham1") ||
+ !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
gpmc_nand_data->ecc_opt =
OMAP_ECC_HAM1_CODE_HW;
else if (!strcmp(s, "bch4"))
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index d42022f2a71e..53841dea80ea 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -663,7 +663,7 @@ void __init dra7xxx_check_revision(void)
default:
/* Unknown default to latest silicon rev as default*/
- pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
+ pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
__func__, idcode, hawkeye, rev);
omap_revision = DRA752_REV_ES1_1;
}
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 01ef59def44b..d22c30d3ccfa 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -56,7 +56,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
if (!IS_ERR(r)) {
- dev_warn(&od->pdev->dev,
+ dev_dbg(&od->pdev->dev,
"alias %s already exists\n", clk_alias);
clk_put(r);
return;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 6c074f37cdd2..8fd87a3055bf 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2185,6 +2185,8 @@ static int _enable(struct omap_hwmod *oh)
oh->mux->pads_dynamic))) {
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
_reconfigure_io_chain();
+ } else if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ _reconfigure_io_chain();
}
_add_initiator_dep(oh, mpu_oh);
@@ -2291,6 +2293,8 @@ static int _idle(struct omap_hwmod *oh)
if (oh->mux && oh->mux->pads_dynamic) {
omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
_reconfigure_io_chain();
+ } else if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ _reconfigure_io_chain();
}
oh->_state = _HWMOD_STATE_IDLE;
@@ -3345,6 +3349,9 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
if (!ois)
return 0;
+ if (ois[0] == NULL) /* Empty list */
+ return 0;
+
if (!linkspace) {
if (_alloc_linkspace(ois)) {
pr_err("omap_hwmod: could not allocate link space\n");
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 2757abf87fbc..5684f112654b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -35,6 +35,7 @@
#include "i2c.h"
#include "mmc.h"
#include "wd_timer.h"
+#include "soc.h"
/* Base offset for all DRA7XX interrupts external to MPUSS */
#define DRA7XX_IRQ_GIC_START 32
@@ -3261,7 +3262,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per3__usb_otg_ss1,
&dra7xx_l4_per3__usb_otg_ss2,
&dra7xx_l4_per3__usb_otg_ss3,
- &dra7xx_l4_per3__usb_otg_ss4,
&dra7xx_l3_main_1__vcp1,
&dra7xx_l4_per2__vcp1,
&dra7xx_l3_main_1__vcp2,
@@ -3270,8 +3270,26 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
NULL,
};
+static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
+ &dra7xx_l4_per3__usb_otg_ss4,
+ NULL,
+};
+
+static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
+ NULL,
+};
+
int __init dra7xx_hwmod_init(void)
{
+ int ret;
+
omap_hwmod_init();
- return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+ ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+
+ if (!ret && soc_is_dra74x())
+ return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
+ else if (!ret && soc_is_dra72x())
+ return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
+
+ return ret;
}
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 01ca8086fb6c..4376f59626d1 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -245,6 +245,8 @@ IS_AM_SUBCLASS(437x, 0x437)
#define soc_is_omap54xx() 0
#define soc_is_omap543x() 0
#define soc_is_dra7xx() 0
+#define soc_is_dra74x() 0
+#define soc_is_dra72x() 0
#if defined(MULTI_OMAP2)
# if defined(CONFIG_ARCH_OMAP2)
@@ -393,7 +395,11 @@ IS_OMAP_TYPE(3430, 0x3430)
#if defined(CONFIG_SOC_DRA7XX)
#undef soc_is_dra7xx
+#undef soc_is_dra74x
+#undef soc_is_dra72x
#define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7"))
+#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74"))
+#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72"))
#endif
/* Various silicon revisions for omap2 */
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index e15dff790dbb..1e6c51c7c2d5 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -75,6 +75,7 @@ config ARCH_SH7372
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select CPU_V7
select SH_CLK_CPG
+ select SH_INTC
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
@@ -85,6 +86,7 @@ config ARCH_SH73A0
select CPU_V7
select I2C
select SH_CLK_CPG
+ select SH_INTC
select RENESAS_INTC_IRQPIN
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 17435c1aa2fe..126ddafad526 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -183,8 +183,8 @@ enum {
static struct clk div4_clks[DIV4_NR] = {
[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
- [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT),
+ [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
+ [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT),
};
/* DIV6 clocks */
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index 10e193d707f5..453b23129cfa 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -152,7 +152,7 @@ enum {
static struct clk div4_clks[DIV4_NR] = {
[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+ [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
};
/* DIV6 clocks */
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index d8c4048b9e33..02a6f45a0b9e 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
- CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 2c2754e79cb3..f61158c6ce71 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -426,9 +426,15 @@ static int ve_spc_populate_opps(uint32_t cluster)
static int ve_init_opp_table(struct device *cpu_dev)
{
- int cluster = topology_physical_package_id(cpu_dev->id);
- int idx, ret = 0, max_opp = info->num_opps[cluster];
- struct ve_spc_opp *opps = info->opps[cluster];
+ int cluster;
+ int idx, ret = 0, max_opp;
+ struct ve_spc_opp *opps;
+
+ cluster = topology_physical_package_id(cpu_dev->id);
+ cluster = cluster < 0 ? 0 : cluster;
+
+ max_opp = info->num_opps[cluster];
+ opps = info->opps[cluster];
for (idx = 0; idx < max_opp; idx++, opps++) {
ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
@@ -537,6 +543,8 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
spc->hw.init = &init;
spc->cluster = topology_physical_package_id(cpu_dev->id);
+ spc->cluster = spc->cluster < 0 ? 0 : spc->cluster;
+
init.name = dev_name(cpu_dev);
init.ops = &clk_spc_ops;
init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 3815a8262af0..8c48c5c22a33 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -17,12 +17,6 @@
*/
.align 5
ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_V6
- sub r1, sp, #4 @ Get unused stack location
- strex r0, r1, [r1] @ Clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
- clrex
-#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
/*
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index 703375277ba6..4812ad054214 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -13,12 +13,6 @@
*/
.align 5
ENTRY(v7_early_abort)
- /*
- * The effect of data aborts on on the exclusive access monitor are
- * UNPREDICTABLE. Do a CLREX to clear the state
- */
- clrex
-
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index a37b989a2f91..a76623bcf722 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -930,5 +930,6 @@ void bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited)
module_free(NULL, fp->bpf_func);
- kfree(fp);
+
+ bpf_prog_unlock_free(fp);
}
diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c
index c294e67d3925..ae67e88c28b9 100644
--- a/arch/arm64/crypto/sha2-ce-glue.c
+++ b/arch/arm64/crypto/sha2-ce-glue.c
@@ -150,7 +150,6 @@ static void sha2_finup(struct shash_desc *desc, const u8 *data,
kernel_neon_begin_partial(28);
sha2_ce_transform(blocks, data, sctx->state, NULL, len);
kernel_neon_end();
- data += blocks * SHA256_BLOCK_SIZE;
}
static int sha224_finup(struct shash_desc *desc, const u8 *data,
diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
index d064047612b1..52b484b6aa1a 100644
--- a/arch/arm64/include/asm/hw_breakpoint.h
+++ b/arch/arm64/include/asm/hw_breakpoint.h
@@ -79,7 +79,6 @@ static inline void decode_ctrl_reg(u32 reg,
*/
#define ARM_MAX_BRP 16
#define ARM_MAX_WRP 16
-#define ARM_MAX_HBP_SLOTS (ARM_MAX_BRP + ARM_MAX_WRP)
/* Virtual debug register bases. */
#define AARCH64_DBG_REG_BVR 0
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 3df21feeabdd..286b1bec547c 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -139,7 +139,7 @@ extern struct task_struct *cpu_switch_to(struct task_struct *prev,
((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
#define KSTK_EIP(tsk) ((unsigned long)task_pt_regs(tsk)->pc)
-#define KSTK_ESP(tsk) ((unsigned long)task_pt_regs(tsk)->sp)
+#define KSTK_ESP(tsk) user_stack_pointer(task_pt_regs(tsk))
/*
* Prefetching support
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 501000fadb6f..41ed9e13795e 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -137,7 +137,7 @@ struct pt_regs {
(!((regs)->pstate & PSR_F_BIT))
#define user_stack_pointer(regs) \
- (!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp)
+ (!compat_user_mode(regs) ? (regs)->sp : (regs)->compat_sp)
static inline unsigned long regs_return_value(struct pt_regs *regs)
{
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index 24f0c6fb61d8..03aaa99e1ea0 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -465,6 +465,8 @@ static int __init arm64_enter_virtual_mode(void)
efi_native_runtime_setup();
set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+ efi.runtime_version = efi.systab->hdr.revision;
+
return 0;
err_unmap:
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index ad8aebb1cdef..3dca15634e69 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -270,6 +270,7 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
case CPU_PM_ENTER:
if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
fpsimd_save_state(&current->thread.fpsimd_state);
+ this_cpu_write(fpsimd_last_state, NULL);
break;
case CPU_PM_EXIT:
if (current->mm)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index bed028364a93..873069056229 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -373,10 +373,6 @@ ENTRY(__boot_cpu_mode)
.long 0
.popsection
- .align 3
-2: .quad .
- .quad PAGE_OFFSET
-
#ifdef CONFIG_SMP
.align 3
1: .quad .
diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c
index 422ebd63b619..6762ad705587 100644
--- a/arch/arm64/kernel/perf_regs.c
+++ b/arch/arm64/kernel/perf_regs.c
@@ -24,6 +24,12 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
return regs->compat_lr;
}
+ if ((u32)idx == PERF_REG_ARM64_SP)
+ return regs->sp;
+
+ if ((u32)idx == PERF_REG_ARM64_PC)
+ return regs->pc;
+
return regs->regs[idx];
}
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 70526cfda056..fe63ac5e9bf5 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -87,7 +87,8 @@ static void ptrace_hbptriggered(struct perf_event *bp,
break;
}
}
- for (i = ARM_MAX_BRP; i < ARM_MAX_HBP_SLOTS && !bp; ++i) {
+
+ for (i = 0; i < ARM_MAX_WRP; ++i) {
if (current->thread.debug.hbp_watch[i] == bp) {
info.si_errno = -((i << 1) + 1);
break;
@@ -662,8 +663,10 @@ static int compat_gpr_get(struct task_struct *target,
kbuf += sizeof(reg);
} else {
ret = copy_to_user(ubuf, &reg, sizeof(reg));
- if (ret)
+ if (ret) {
+ ret = -EFAULT;
break;
+ }
ubuf += sizeof(reg);
}
@@ -701,8 +704,10 @@ static int compat_gpr_set(struct task_struct *target,
kbuf += sizeof(reg);
} else {
ret = copy_from_user(&reg, ubuf, sizeof(reg));
- if (ret)
- return ret;
+ if (ret) {
+ ret = -EFAULT;
+ break;
+ }
ubuf += sizeof(reg);
}
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index f6f0ccf35ae6..edb146d01857 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -78,6 +78,7 @@ unsigned int compat_elf_hwcap2 __read_mostly;
#endif
static const char *cpu_name;
+static const char *machine_name;
phys_addr_t __fdt_pointer __initdata;
/*
@@ -309,6 +310,8 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
while (true)
cpu_relax();
}
+
+ machine_name = of_flat_dt_get_machine_name();
}
/*
@@ -447,21 +450,10 @@ static int c_show(struct seq_file *m, void *v)
{
int i;
- /*
- * Dump out the common processor features in a single line. Userspace
- * should read the hwcaps with getauxval(AT_HWCAP) rather than
- * attempting to parse this.
- */
- seq_puts(m, "features\t:");
- for (i = 0; hwcap_str[i]; i++)
- if (elf_hwcap & (1 << i))
- seq_printf(m, " %s", hwcap_str[i]);
- seq_puts(m, "\n\n");
+ seq_printf(m, "Processor\t: %s rev %d (%s)\n",
+ cpu_name, read_cpuid_id() & 15, ELF_PLATFORM);
for_each_online_cpu(i) {
- struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
- u32 midr = cpuinfo->reg_midr;
-
/*
* glibc reads /proc/cpuinfo to determine the number of
* online processors, looking for lines beginning with
@@ -470,13 +462,25 @@ static int c_show(struct seq_file *m, void *v)
#ifdef CONFIG_SMP
seq_printf(m, "processor\t: %d\n", i);
#endif
- seq_printf(m, "implementer\t: 0x%02x\n",
- MIDR_IMPLEMENTOR(midr));
- seq_printf(m, "variant\t\t: 0x%x\n", MIDR_VARIANT(midr));
- seq_printf(m, "partnum\t\t: 0x%03x\n", MIDR_PARTNUM(midr));
- seq_printf(m, "revision\t: 0x%x\n\n", MIDR_REVISION(midr));
}
+ /* dump out the processor features */
+ seq_puts(m, "Features\t: ");
+
+ for (i = 0; hwcap_str[i]; i++)
+ if (elf_hwcap & (1 << i))
+ seq_printf(m, "%s ", hwcap_str[i]);
+
+ seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
+ seq_printf(m, "CPU architecture: AArch64\n");
+ seq_printf(m, "CPU variant\t: 0x%x\n", (read_cpuid_id() >> 20) & 15);
+ seq_printf(m, "CPU part\t: 0x%03x\n", (read_cpuid_id() >> 4) & 0xfff);
+ seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
+
+ seq_puts(m, "\n");
+
+ seq_printf(m, "Hardware\t: %s\n", machine_name);
+
return 0;
}
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index e28be510380c..34b8bd0711e9 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -66,6 +66,8 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
else
kvm_vcpu_block(vcpu);
+ kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+
return 1;
}
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index d968796f4b2d..c3191168a994 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -80,6 +80,10 @@ __do_hyp_init:
msr mair_el2, x4
isb
+ /* Invalidate the stale TLBs from Bootloader */
+ tlbi alle2
+ dsb sy
+
mrs x4, sctlr_el2
and x4, x4, #SCTLR_EL2_EE // preserve endianness of EL2
ldr x5, =SCTLR_EL2_FLAGS
diff --git a/arch/hexagon/mm/cache.c b/arch/hexagon/mm/cache.c
index fe14ccf28561..0c76c802e31c 100644
--- a/arch/hexagon/mm/cache.c
+++ b/arch/hexagon/mm/cache.c
@@ -68,6 +68,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
);
local_irq_restore(flags);
}
+EXPORT_SYMBOL(flush_icache_range);
void hexagon_clean_dcache_range(unsigned long start, unsigned long end)
{
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 64aefb76bd69..c84c88bbbbd7 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -549,8 +549,6 @@ source "drivers/sn/Kconfig"
config KEXEC
bool "kexec system call"
depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 3ff8c9a25335..87b7c7581b1d 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -91,8 +91,6 @@ config MMU_SUN3
config KEXEC
bool "kexec system call"
depends on M68KCLASSIC
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 1fcdd344c7ad..4ef7a54813e6 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
-#define NR_syscalls 352
+#define NR_syscalls 354
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h
index 9cd82fbc7817..b419c6b7ac37 100644
--- a/arch/m68k/include/uapi/asm/unistd.h
+++ b/arch/m68k/include/uapi/asm/unistd.h
@@ -357,5 +357,7 @@
#define __NR_sched_setattr 349
#define __NR_sched_getattr 350
#define __NR_renameat2 351
+#define __NR_getrandom 352
+#define __NR_memfd_create 353
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index 501e10212789..05b46c2b08b8 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -372,4 +372,6 @@ ENTRY(sys_call_table)
.long sys_sched_setattr
.long sys_sched_getattr /* 350 */
.long sys_renameat2
+ .long sys_getrandom
+ .long sys_memfd_create
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index df51e78a72cc..900c7e5333b6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2396,8 +2396,6 @@ source "kernel/Kconfig.preempt"
config KEXEC
bool "Kexec system call"
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 776188908dfc..8c13675a12e7 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -847,6 +847,7 @@ int __init db1200_dev_setup(void)
pr_warn("DB1200: cant get I2C close to 50MHz\n");
else
clk_set_rate(c, pfc);
+ clk_prepare_enable(c);
clk_put(c);
}
@@ -922,11 +923,6 @@ int __init db1200_dev_setup(void)
}
/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
- c = clk_get(NULL, "psc1_intclk");
- if (!IS_ERR(c)) {
- clk_prepare_enable(c);
- clk_put(c);
- }
__raw_writel(PSC_SEL_CLK_SERCLK,
(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 2b63e7e7d3d3..ad439c273003 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -59,12 +59,21 @@ static void bcm47xx_machine_restart(char *command)
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 3);
+ if (bcm47xx_bus.ssb.chip_id == 0x4785)
+ write_c0_diag4(1 << 22);
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ if (bcm47xx_bus.ssb.chip_id == 0x4785) {
+ __asm__ __volatile__(
+ ".set\tmips3\n\t"
+ "sync\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+ }
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 3);
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
break;
#endif
}
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 008e9c8b8eac..38f4c32e2816 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -263,7 +263,6 @@ static uint64_t crashk_size, crashk_base;
static int octeon_uart;
extern asmlinkage void handle_int(void);
-extern asmlinkage void plat_irq_dispatch(void);
/**
* Return non zero if we are currently running in the Octeon simulator
@@ -458,6 +457,18 @@ static void octeon_halt(void)
octeon_kill_core(NULL);
}
+static char __read_mostly octeon_system_type[80];
+
+static int __init init_octeon_system_type(void)
+{
+ snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)",
+ cvmx_board_type_to_string(octeon_bootinfo->board_type),
+ octeon_model_get_string(read_c0_prid()));
+
+ return 0;
+}
+early_initcall(init_octeon_system_type);
+
/**
* Return a string representing the system type
*
@@ -465,11 +476,7 @@ static void octeon_halt(void)
*/
const char *octeon_board_type_string(void)
{
- static char name[80];
- sprintf(name, "%s (%s)",
- cvmx_board_type_to_string(octeon_bootinfo->board_type),
- octeon_model_get_string(read_c0_prid()));
- return name;
+ return octeon_system_type;
}
const char *get_system_type(void)
diff --git a/arch/mips/include/asm/eva.h b/arch/mips/include/asm/eva.h
new file mode 100644
index 000000000000..a3d1807f227c
--- /dev/null
+++ b/arch/mips/include/asm/eva.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014, Imagination Technologies Ltd.
+ *
+ * EVA functions for generic code
+ */
+
+#ifndef _ASM_EVA_H
+#define _ASM_EVA_H
+
+#include <kernel-entry-init.h>
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_EVA
+
+/*
+ * EVA early init code
+ *
+ * Platforms must define their own 'platform_eva_init' macro in
+ * their kernel-entry-init.h header. This macro usually does the
+ * platform specific configuration of the segmentation registers,
+ * and it is normally called from assembly code.
+ *
+ */
+
+.macro eva_init
+platform_eva_init
+.endm
+
+#else
+
+.macro eva_init
+.endm
+
+#endif /* CONFIG_EVA */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 3f20b2111d56..d7699cf7e135 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -49,7 +49,7 @@
#endif
#define GICBIS(reg, mask, bits) \
do { u32 data; \
- GICREAD((reg), data); \
+ GICREAD(reg, data); \
data &= ~(mask); \
data |= ((bits) & (mask)); \
GICWRITE((reg), data); \
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index ae1f7b24dd1a..39f07aec640c 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -26,6 +26,8 @@ static inline int irq_canonicalize(int irq)
#define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */
#endif
+asmlinkage void plat_irq_dispatch(void);
+
extern void do_IRQ(unsigned int irq);
extern void arch_init_irq(void);
diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
index 77eeda77e73c..0cf8622db27f 100644
--- a/arch/mips/include/asm/mach-malta/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
@@ -10,14 +10,15 @@
#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
/*
* Prepare segments for EVA boot:
*
* This is in case the processor boots in legacy configuration
* (SI_EVAReset is de-asserted and CONFIG5.K == 0)
*
- * On entry, t1 is loaded with CP0_CONFIG
- *
* ========================= Mappings =============================
* Virtual memory Physical memory Mapping
* 0x00000000 - 0x7fffffff 0x80000000 - 0xfffffffff MUSUK (kuseg)
@@ -30,12 +31,20 @@
*
*
* Lowmem is expanded to 2GB
+ *
+ * The following code uses the t0, t1, t2 and ra registers without
+ * previously preserving them.
+ *
*/
- .macro eva_entry
+ .macro platform_eva_init
+
+ .set push
+ .set reorder
/*
* Get Config.K0 value and use it to program
* the segmentation registers
*/
+ mfc0 t1, CP0_CONFIG
andi t1, 0x7 /* CCA */
move t2, t1
ins t2, t1, 16, 3
@@ -77,6 +86,8 @@
mtc0 t0, $16, 5
sync
jal mips_ihb
+
+ .set pop
.endm
.macro kernel_entry_setup
@@ -95,7 +106,7 @@
sll t0, t0, 6 /* SC bit */
bgez t0, 9f
- eva_entry
+ platform_eva_init
b 0f
9:
/* Assume we came from YAMON... */
@@ -127,8 +138,7 @@ nonsc_processor:
#ifdef CONFIG_EVA
sync
ehb
- mfc0 t1, CP0_CONFIG
- eva_entry
+ platform_eva_init
#endif
.endm
diff --git a/arch/mips/include/asm/mach-netlogic/topology.h b/arch/mips/include/asm/mach-netlogic/topology.h
index ceeb1f5e7129..0eb43c832b25 100644
--- a/arch/mips/include/asm/mach-netlogic/topology.h
+++ b/arch/mips/include/asm/mach-netlogic/topology.h
@@ -10,13 +10,6 @@
#include <asm/mach-netlogic/multi-node.h>
-#ifdef CONFIG_SMP
-#define topology_physical_package_id(cpu) cpu_to_node(cpu)
-#define topology_core_id(cpu) (cpu_logical_map(cpu) / NLM_THREADS_PER_CORE)
-#define topology_thread_cpumask(cpu) (&cpu_sibling_map[cpu])
-#define topology_core_cpumask(cpu) cpumask_of_node(cpu_to_node(cpu))
-#endif
-
#include <asm-generic/topology.h>
#endif /* _ASM_MACH_NETLOGIC_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 027c74db13f9..df49a308085c 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -122,6 +122,9 @@ do { \
} \
} while(0)
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+ pte_t pteval);
+
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
@@ -145,7 +148,6 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
}
}
}
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
@@ -183,7 +185,6 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
}
#endif
}
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
@@ -390,15 +391,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
pte_t pte);
-extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep)
{
pte_t pte = *ptep;
__update_tlb(vma, address, pte);
- __update_cache(vma, address, pte);
}
static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
index 17960fe7a8ce..cdf68b33bd65 100644
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -131,10 +131,12 @@ static inline int syscall_get_arch(void)
{
int arch = EM_MIPS;
#ifdef CONFIG_64BIT
- if (!test_thread_flag(TIF_32BIT_REGS))
+ if (!test_thread_flag(TIF_32BIT_REGS)) {
arch |= __AUDIT_ARCH_64BIT;
- if (test_thread_flag(TIF_32BIT_ADDR))
- arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
+ /* N32 sets only TIF_32BIT_ADDR */
+ if (test_thread_flag(TIF_32BIT_ADDR))
+ arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
+ }
#endif
#if defined(__LITTLE_ENDIAN)
arch |= __AUDIT_ARCH_LE;
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index 6f4f739dad96..e6e97d2a5c9e 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -13,6 +13,7 @@
#include <asm/asm-offsets.h>
#include <asm/asmmacro.h>
#include <asm/cacheops.h>
+#include <asm/eva.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/pm.h>
@@ -166,6 +167,9 @@ dcache_done:
1: jal mips_cps_core_init
nop
+ /* Do any EVA initialization if necessary */
+ eva_init
+
/*
* Boot any other VPEs within this core that should be online, and
* deactivate this VPE if it should be offline.
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 14bf74b0f51c..b63f2482f288 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -558,7 +558,7 @@ static int mipspmu_get_irq(void)
if (mipspmu.irq >= 0) {
/* Request my own irq handler. */
err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
- IRQF_PERCPU | IRQF_NOBALANCING,
+ IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_THREAD,
"mips_perf_pmu", NULL);
if (err) {
pr_warning("Unable to request IRQ%d for MIPS "
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 13b964fddc4a..25bb8400156d 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -113,15 +113,19 @@ trace_a_syscall:
move s0, t2 # Save syscall pointer
move a0, sp
/*
- * syscall number is in v0 unless we called syscall(__NR_###)
+ * absolute syscall number is in v0 unless we called syscall(__NR_###)
* where the real syscall number is in a0
* note: NR_syscall is the first O32 syscall but the macro is
* only defined when compiling with -mabi=32 (CONFIG_32BIT)
* therefore __NR_O32_Linux is used (4000)
*/
- addiu a1, v0, __NR_O32_Linux
- bnez v0, 1f /* __NR_syscall at offset 0 */
- lw a1, PT_R4(sp)
+ .set push
+ .set reorder
+ subu t1, v0, __NR_O32_Linux
+ move a1, v0
+ bnez t1, 1f /* __NR_syscall at offset 0 */
+ lw a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
+ .set pop
1: jal syscall_trace_enter
diff --git a/arch/mips/loongson/loongson-3/cop2-ex.c b/arch/mips/loongson/loongson-3/cop2-ex.c
index 9182e8d2967c..b03e37d2071a 100644
--- a/arch/mips/loongson/loongson-3/cop2-ex.c
+++ b/arch/mips/loongson/loongson-3/cop2-ex.c
@@ -22,13 +22,13 @@
static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
void *data)
{
- int fpu_enabled;
+ int fpu_owned;
int fr = !test_thread_flag(TIF_32BIT_FPREGS);
switch (action) {
case CU2_EXCEPTION:
preempt_disable();
- fpu_enabled = read_c0_status() & ST0_CU1;
+ fpu_owned = __is_fpu_owner();
if (!fr)
set_c0_status(ST0_CU1 | ST0_CU2);
else
@@ -39,8 +39,8 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
KSTK_STATUS(current) |= ST0_FR;
else
KSTK_STATUS(current) &= ~ST0_FR;
- /* If FPU is enabled, we needn't init or restore fp */
- if(!fpu_enabled) {
+ /* If FPU is owned, we needn't init or restore fp */
+ if (!fpu_owned) {
set_thread_flag(TIF_USEDFPU);
if (!used_math()) {
_init_fpu();
diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson/loongson-3/numa.c
index ca025a6ba559..37ed184398c6 100644
--- a/arch/mips/loongson/loongson-3/numa.c
+++ b/arch/mips/loongson/loongson-3/numa.c
@@ -24,8 +24,6 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
-#include <linux/bootmem.h>
-#include <linux/init.h>
#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/mc146818-time.h>
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index f7b91d3a371d..7e3ea7766822 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -119,25 +119,36 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
EXPORT_SYMBOL(__flush_anon_page);
-void __update_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte)
+static void mips_flush_dcache_from_pte(pte_t pteval, unsigned long address)
{
struct page *page;
- unsigned long pfn, addr;
- int exec = (vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc;
+ unsigned long pfn = pte_pfn(pteval);
- pfn = pte_pfn(pte);
if (unlikely(!pfn_valid(pfn)))
return;
+
page = pfn_to_page(pfn);
if (page_mapping(page) && Page_dcache_dirty(page)) {
- addr = (unsigned long) page_address(page);
- if (exec || pages_do_alias(addr, address & PAGE_MASK))
- flush_data_cache_page(addr);
+ unsigned long page_addr = (unsigned long) page_address(page);
+
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias(page_addr, address & PAGE_MASK))
+ flush_data_cache_page(page_addr);
ClearPageDcacheDirty(page);
}
}
+void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval)
+{
+ if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) {
+ if (pte_present(pteval))
+ mips_flush_dcache_from_pte(pteval, addr);
+ }
+
+ set_pte(ptep, pteval);
+}
+
unsigned long _page_cachable_default;
EXPORT_SYMBOL(_page_cachable_default);
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index 0c35dee0a215..8fddd2cdbff7 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -35,13 +35,19 @@ fw_memblock_t * __init fw_getmdesc(int eva)
/* otherwise look in the environment */
memsize_str = fw_getenv("memsize");
- if (memsize_str)
- tmp = kstrtol(memsize_str, 0, &memsize);
+ if (memsize_str) {
+ tmp = kstrtoul(memsize_str, 0, &memsize);
+ if (tmp)
+ pr_warn("Failed to read the 'memsize' env variable.\n");
+ }
if (eva) {
/* Look for ememsize for EVA */
ememsize_str = fw_getenv("ememsize");
- if (ememsize_str)
- tmp = kstrtol(ememsize_str, 0, &ememsize);
+ if (ememsize_str) {
+ tmp = kstrtoul(ememsize_str, 0, &ememsize);
+ if (tmp)
+ pr_warn("Failed to read the 'ememsize' env variable.\n");
+ }
}
if (!memsize && !ememsize) {
pr_warn("memsize not set in YAMON, set to default (32Mb)\n");
diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
index 05a56619ece2..cfa83cf2447d 100644
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -1427,5 +1427,6 @@ void bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited)
module_free(NULL, fp->bpf_func);
- kfree(fp);
+
+ bpf_prog_unlock_free(fp);
}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c
index 941744aabb51..f914c753de21 100644
--- a/arch/mips/pmcs-msp71xx/msp_irq.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq.c
@@ -51,7 +51,7 @@ static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); }
* the range 40-71.
*/
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(void)
{
u32 pending;
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a577609f8ed6..4bc7b62fb4b6 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -399,8 +399,6 @@ config PPC64_SUPPORTS_MEMORY_FAILURE
config KEXEC
bool "kexec system call"
depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 72c20bb16d26..79294c4c5015 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -62,10 +62,10 @@ long kvmppc_alloc_hpt(struct kvm *kvm, u32 *htab_orderp)
}
kvm->arch.hpt_cma_alloc = 0;
- page = kvm_alloc_hpt(1 << (order - PAGE_SHIFT));
+ page = kvm_alloc_hpt(1ul << (order - PAGE_SHIFT));
if (page) {
hpt = (unsigned long)pfn_to_kaddr(page_to_pfn(page));
- memset((void *)hpt, 0, (1 << order));
+ memset((void *)hpt, 0, (1ul << order));
kvm->arch.hpt_cma_alloc = 1;
}
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index 3afa6f4c1957..40c53ff59124 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -697,5 +697,6 @@ void bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited)
module_free(NULL, fp->bpf_func);
- kfree(fp);
+
+ bpf_prog_unlock_free(fp);
}
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index ab39ceb89ecf..05c78bb5f570 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -48,8 +48,6 @@ config ARCH_SUPPORTS_DEBUG_PAGEALLOC
config KEXEC
def_bool y
- select CRYPTO
- select CRYPTO_SHA256
config AUDIT_ARCH
def_bool y
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index b76317c1f3eb..5efb2fe186e7 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -1127,7 +1127,7 @@ static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
pgste_t pgste;
- pte_t pte;
+ pte_t pte, oldpte;
int young;
if (mm_has_pgste(vma->vm_mm)) {
@@ -1135,12 +1135,13 @@ static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
pgste = pgste_ipte_notify(vma->vm_mm, ptep, pgste);
}
- pte = *ptep;
+ oldpte = pte = *ptep;
ptep_flush_direct(vma->vm_mm, addr, ptep);
young = pte_young(pte);
pte = pte_mkold(pte);
if (mm_has_pgste(vma->vm_mm)) {
+ pgste = pgste_update_all(&oldpte, pgste, vma->vm_mm);
pgste = pgste_set_pte(ptep, pgste, pte);
pgste_set_unlock(ptep, pgste);
} else
@@ -1330,6 +1331,7 @@ static inline int ptep_set_access_flags(struct vm_area_struct *vma,
ptep_flush_direct(vma->vm_mm, address, ptep);
if (mm_has_pgste(vma->vm_mm)) {
+ pgste_set_key(ptep, pgste, entry, vma->vm_mm);
pgste = pgste_set_pte(ptep, pgste, entry);
pgste_set_unlock(ptep, pgste);
} else
diff --git a/arch/s390/include/uapi/asm/unistd.h b/arch/s390/include/uapi/asm/unistd.h
index 3802d2d3a18d..940ac49198db 100644
--- a/arch/s390/include/uapi/asm/unistd.h
+++ b/arch/s390/include/uapi/asm/unistd.h
@@ -283,7 +283,10 @@
#define __NR_sched_setattr 345
#define __NR_sched_getattr 346
#define __NR_renameat2 347
-#define NR_syscalls 348
+#define __NR_seccomp 348
+#define __NR_getrandom 349
+#define __NR_memfd_create 350
+#define NR_syscalls 351
/*
* There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/compat_wrapper.c b/arch/s390/kernel/compat_wrapper.c
index 45cdb37aa6f8..faf6caa510dc 100644
--- a/arch/s390/kernel/compat_wrapper.c
+++ b/arch/s390/kernel/compat_wrapper.c
@@ -214,3 +214,6 @@ COMPAT_SYSCALL_WRAP3(finit_module, int, fd, const char __user *, uargs, int, fla
COMPAT_SYSCALL_WRAP3(sched_setattr, pid_t, pid, struct sched_attr __user *, attr, unsigned int, flags);
COMPAT_SYSCALL_WRAP4(sched_getattr, pid_t, pid, struct sched_attr __user *, attr, unsigned int, size, unsigned int, flags);
COMPAT_SYSCALL_WRAP5(renameat2, int, olddfd, const char __user *, oldname, int, newdfd, const char __user *, newname, unsigned int, flags);
+COMPAT_SYSCALL_WRAP3(seccomp, unsigned int, op, unsigned int, flags, const char __user *, uargs)
+COMPAT_SYSCALL_WRAP3(getrandom, char __user *, buf, size_t, count, unsigned int, flags)
+COMPAT_SYSCALL_WRAP2(memfd_create, const char __user *, uname, unsigned int, flags)
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 633ca7504536..22aac5885ba2 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2060,6 +2060,13 @@ void s390_reset_system(void (*func)(void *), void *data)
S390_lowcore.program_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
+ /*
+ * Clear subchannel ID and number to signal new kernel that no CCW or
+ * SCSI IPL has been done (for kexec and kdump)
+ */
+ S390_lowcore.subchannel_id = 0;
+ S390_lowcore.subchannel_nr = 0;
+
/* Store status at absolute zero */
store_status();
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index ae1d5be7dd88..82bc113e8c1d 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -24,6 +24,7 @@
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
+#include <linux/random.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/ioport.h>
@@ -61,6 +62,7 @@
#include <asm/diag.h>
#include <asm/os_info.h>
#include <asm/sclp.h>
+#include <asm/sysinfo.h>
#include "entry.h"
/*
@@ -766,6 +768,7 @@ static void __init setup_hwcaps(void)
#endif
get_cpu_id(&cpu_id);
+ add_device_randomness(&cpu_id, sizeof(cpu_id));
switch (cpu_id.machine) {
case 0x9672:
#if !defined(CONFIG_64BIT)
@@ -804,6 +807,19 @@ static void __init setup_hwcaps(void)
}
/*
+ * Add system information as device randomness
+ */
+static void __init setup_randomness(void)
+{
+ struct sysinfo_3_2_2 *vmms;
+
+ vmms = (struct sysinfo_3_2_2 *) alloc_page(GFP_KERNEL);
+ if (vmms && stsi(vmms, 3, 2, 2) == 0 && vmms->count)
+ add_device_randomness(&vmms, vmms->count);
+ free_page((unsigned long) vmms);
+}
+
+/*
* Setup function called from init/main.c just after the banner
* was printed.
*/
@@ -901,6 +917,9 @@ void __init setup_arch(char **cmdline_p)
/* Setup zfcpdump support */
setup_zfcpdump();
+
+ /* Add system specific data to the random pool */
+ setup_randomness();
}
#ifdef CONFIG_32BIT
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index fe5cdf29a001..6fe886ac2db5 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -356,3 +356,6 @@ SYSCALL(sys_finit_module,sys_finit_module,compat_sys_finit_module)
SYSCALL(sys_sched_setattr,sys_sched_setattr,compat_sys_sched_setattr) /* 345 */
SYSCALL(sys_sched_getattr,sys_sched_getattr,compat_sys_sched_getattr)
SYSCALL(sys_renameat2,sys_renameat2,compat_sys_renameat2)
+SYSCALL(sys_seccomp,sys_seccomp,compat_sys_seccomp)
+SYSCALL(sys_getrandom,sys_getrandom,compat_sys_getrandom)
+SYSCALL(sys_memfd_create,sys_memfd_create,compat_sys_memfd_create) /* 350 */
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index ce81eb2ab76a..81b0e11521e4 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1317,19 +1317,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
return -EINVAL;
}
- switch (kvm_run->exit_reason) {
- case KVM_EXIT_S390_SIEIC:
- case KVM_EXIT_UNKNOWN:
- case KVM_EXIT_INTR:
- case KVM_EXIT_S390_RESET:
- case KVM_EXIT_S390_UCONTROL:
- case KVM_EXIT_S390_TSCH:
- case KVM_EXIT_DEBUG:
- break;
- default:
- BUG();
- }
-
vcpu->arch.sie_block->gpsw.mask = kvm_run->psw_mask;
vcpu->arch.sie_block->gpsw.addr = kvm_run->psw_addr;
if (kvm_run->kvm_dirty_regs & KVM_SYNC_PREFIX) {
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 19daa53a3da4..5404a6261db9 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -986,11 +986,21 @@ int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
pte_t *ptep;
down_read(&mm->mmap_sem);
+retry:
ptep = get_locked_pte(current->mm, addr, &ptl);
if (unlikely(!ptep)) {
up_read(&mm->mmap_sem);
return -EFAULT;
}
+ if (!(pte_val(*ptep) & _PAGE_INVALID) &&
+ (pte_val(*ptep) & _PAGE_PROTECT)) {
+ pte_unmap_unlock(*ptep, ptl);
+ if (fixup_user_fault(current, mm, addr, FAULT_FLAG_WRITE)) {
+ up_read(&mm->mmap_sem);
+ return -EFAULT;
+ }
+ goto retry;
+ }
new = old = pgste_get_lock(ptep);
pgste_val(new) &= ~(PGSTE_GR_BIT | PGSTE_GC_BIT |
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 61e45b7c04d7..f2833c5b218a 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -887,5 +887,5 @@ void bpf_jit_free(struct bpf_prog *fp)
module_free(NULL, header);
free_filter:
- kfree(fp);
+ bpf_prog_unlock_free(fp);
}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 453fa5c09550..244fb4c81e25 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -172,6 +172,7 @@ menu "System type"
#
config CPU_SH2
bool
+ select SH_INTC
config CPU_SH2A
bool
@@ -182,6 +183,7 @@ config CPU_SH3
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
+ select SH_INTC
select SYS_SUPPORTS_SH_TMU
config CPU_SH4
@@ -189,6 +191,7 @@ config CPU_SH4
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
+ select SH_INTC
select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU
@@ -595,8 +598,6 @@ source kernel/Kconfig.hz
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on SUPERH32 && MMU
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 097c2cdd117f..f770e3992620 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -229,6 +229,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
}
+EXPORT_SYMBOL(flush_icache_range);
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
{
diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c
index 1f76c22a6a75..f7a736b645e8 100644
--- a/arch/sparc/net/bpf_jit_comp.c
+++ b/arch/sparc/net/bpf_jit_comp.c
@@ -812,5 +812,6 @@ void bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited)
module_free(NULL, fp->bpf_func);
- kfree(fp);
+
+ bpf_prog_unlock_free(fp);
}
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index a3ffe2dd4832..7fcd492adbfc 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -191,8 +191,6 @@ source "kernel/Kconfig.hz"
config KEXEC
bool "kexec system call"
- select CRYPTO
- select CRYPTO_SHA256
---help---
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index 01e8ab29f43a..19eaa62d456a 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -183,6 +183,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
preempt_enable();
}
}
+EXPORT_SYMBOL(flush_icache_range);
/* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */
diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c
index 780d77388dec..7c8fb7018dc6 100644
--- a/arch/unicore32/kernel/signal.c
+++ b/arch/unicore32/kernel/signal.c
@@ -254,7 +254,8 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set,
err |= setup_sigframe(frame, regs, set);
if (err == 0)
- err |= setup_return(regs, &ksig->ka, frame->retcode, frame, usig);
+ err |= setup_return(regs, &ksig->ka, frame->retcode, frame,
+ ksig->sig);
return err;
}
@@ -276,7 +277,8 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
err |= __save_altstack(&frame->sig.uc.uc_stack, regs->UCreg_sp);
err |= setup_sigframe(&frame->sig, regs, set);
if (err == 0)
- err |= setup_return(regs, &ksig->ka, frame->sig.retcode, frame, usig);
+ err |= setup_return(regs, &ksig->ka, frame->sig.retcode, frame,
+ ksig->sig);
if (err == 0) {
/*
@@ -303,7 +305,6 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs,
int syscall)
{
struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = current;
sigset_t *oldset = sigmask_to_save();
int usig = ksig->sig;
int ret;
@@ -373,7 +374,7 @@ static void do_signal(struct pt_regs *regs, int syscall)
if (!user_mode(regs))
return;
- if (get_signsl(&ksig)) {
+ if (get_signal(&ksig)) {
handle_signal(&ksig, regs, syscall);
return;
}
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index 61b6d51866f8..3942f74c92d7 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -17,6 +17,4 @@ obj-$(CONFIG_IA32_EMULATION) += ia32/
obj-y += platform/
obj-y += net/
-ifeq ($(CONFIG_X86_64),y)
-obj-$(CONFIG_KEXEC) += purgatory/
-endif
+obj-$(CONFIG_KEXEC_FILE) += purgatory/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5d0bf1aa9dcb..778178f4c7d1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1585,9 +1585,6 @@ source kernel/Kconfig.hz
config KEXEC
bool "kexec system call"
- select BUILD_BIN2C
- select CRYPTO
- select CRYPTO_SHA256
---help---
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -1602,9 +1599,22 @@ config KEXEC
interface is strongly in flux, so no good recommendation can be
made.
+config KEXEC_FILE
+ bool "kexec file based system call"
+ select BUILD_BIN2C
+ depends on KEXEC
+ depends on X86_64
+ depends on CRYPTO=y
+ depends on CRYPTO_SHA256=y
+ ---help---
+ This is new version of kexec system call. This system call is
+ file based and takes file descriptors as system call argument
+ for kernel and initramfs as opposed to list of segments as
+ accepted by previous system call.
+
config KEXEC_VERIFY_SIG
bool "Verify kernel signature during kexec_file_load() syscall"
- depends on KEXEC
+ depends on KEXEC_FILE
---help---
This option makes kernel signature verification mandatory for
kexec_file_load() syscall. If kernel is signature can not be
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index c1aa36887843..60087ca37679 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -184,11 +184,8 @@ archheaders:
$(Q)$(MAKE) $(build)=arch/x86/syscalls all
archprepare:
-ifeq ($(CONFIG_KEXEC),y)
-# Build only for 64bit. No loaders for 32bit yet.
- ifeq ($(CONFIG_X86_64),y)
+ifeq ($(CONFIG_KEXEC_FILE),y)
$(Q)$(MAKE) $(build)=arch/x86/purgatory arch/x86/purgatory/kexec-purgatory.c
- endif
endif
###
@@ -254,6 +251,7 @@ archclean:
$(Q)rm -rf $(objtree)/arch/x86_64
$(Q)$(MAKE) $(clean)=$(boot)
$(Q)$(MAKE) $(clean)=arch/x86/tools
+ $(Q)$(MAKE) $(clean)=arch/x86/purgatory
PHONY += kvmconfig
kvmconfig:
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 0aeed5ca356e..478c490f3654 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -227,6 +227,8 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
extern void io_apic_eoi(unsigned int apic, unsigned int vector);
+extern bool mp_should_keep_irq(struct device *dev);
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 0ec056012618..aa97a070f09f 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -131,8 +131,13 @@ static inline int pte_exec(pte_t pte)
static inline int pte_special(pte_t pte)
{
- return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) ==
- (_PAGE_PRESENT|_PAGE_SPECIAL);
+ /*
+ * See CONFIG_NUMA_BALANCING pte_numa in include/asm-generic/pgtable.h.
+ * On x86 we have _PAGE_BIT_NUMA == _PAGE_BIT_GLOBAL+1 ==
+ * __PAGE_BIT_SOFTW1 == _PAGE_BIT_SPECIAL.
+ */
+ return (pte_flags(pte) & _PAGE_SPECIAL) &&
+ (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_PROTNONE));
}
static inline unsigned long pte_pfn(pte_t pte)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index b5ea75c4a4b4..ada2e2d6be3e 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
obj-$(CONFIG_X86_TSC) += trace_clock.o
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
+obj-$(CONFIG_KEXEC_FILE) += kexec-bzimage64.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
obj-y += kprobes/
obj-$(CONFIG_MODULES) += module.o
@@ -118,5 +119,4 @@ ifeq ($(CONFIG_X86_64),y)
obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o
obj-y += vsmp_64.o
- obj-$(CONFIG_KEXEC) += kexec-bzimage64.o
endif
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 29290f554e79..337ce5a9b15c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1070,6 +1070,11 @@ static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
}
if (flags & IOAPIC_MAP_ALLOC) {
+ /* special handling for legacy IRQs */
+ if (irq < nr_legacy_irqs() && info->count == 1 &&
+ mp_irqdomain_map(domain, irq, pin) != 0)
+ irq = -1;
+
if (irq > 0)
info->count++;
else if (info->count == 0)
@@ -3896,7 +3901,15 @@ int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
info->polarity = 1;
}
info->node = NUMA_NO_NODE;
- info->set = 1;
+
+ /*
+ * setup_IO_APIC_irqs() programs all legacy IRQs with default
+ * trigger and polarity attributes. Don't set the flag for that
+ * case so the first legacy IRQ user could reprogram the pin
+ * with real trigger and polarity attributes.
+ */
+ if (virq >= nr_legacy_irqs() || info->count)
+ info->set = 1;
}
set_io_apic_irq_attr(&attr, ioapic, hwirq, info->trigger,
info->polarity);
@@ -3946,6 +3959,18 @@ int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node)
return ret;
}
+bool mp_should_keep_irq(struct device *dev)
+{
+ if (dev->power.is_prepared)
+ return true;
+#ifdef CONFIG_PM_RUNTIME
+ if (dev->power.runtime_status == RPM_SUSPENDING)
+ return true;
+#endif
+
+ return false;
+}
+
/* Enable IOAPIC early just for system timer */
void __init pre_init_apic_IRQ0(void)
{
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 0553a34fa0df..a618fcd2c07d 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -182,8 +182,7 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
crash_save_cpu(regs, safe_smp_processor_id());
}
-#ifdef CONFIG_X86_64
-
+#ifdef CONFIG_KEXEC_FILE
static int get_nr_ram_ranges_callback(unsigned long start_pfn,
unsigned long nr_pfn, void *arg)
{
@@ -696,5 +695,4 @@ int crash_load_segments(struct kimage *image)
return ret;
}
-
-#endif /* CONFIG_X86_64 */
+#endif /* CONFIG_KEXEC_FILE */
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 47c410d99f5d..4b0e1dfa2226 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -683,7 +683,7 @@ END(syscall_badsys)
sysenter_badsys:
movl $-ENOSYS,%eax
jmp sysenter_after_call
-END(syscall_badsys)
+END(sysenter_badsys)
CFI_ENDPROC
.macro FIXUP_ESPFIX_STACK
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 1e6cff5814fa..44f1ed42fdf2 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -203,7 +203,7 @@ void __init native_init_IRQ(void)
set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
}
- if (!acpi_ioapic && !of_ioapic)
+ if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
setup_irq(2, &irq2);
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 8b04018e5d1f..485981059a40 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -25,9 +25,11 @@
#include <asm/debugreg.h>
#include <asm/kexec-bzimage64.h>
+#ifdef CONFIG_KEXEC_FILE
static struct kexec_file_ops *kexec_file_loaders[] = {
&kexec_bzImage64_ops,
};
+#endif
static void free_transition_pgtable(struct kimage *image)
{
@@ -178,6 +180,7 @@ static void load_segments(void)
);
}
+#ifdef CONFIG_KEXEC_FILE
/* Update purgatory as needed after various image segments have been prepared */
static int arch_update_purgatory(struct kimage *image)
{
@@ -209,6 +212,12 @@ static int arch_update_purgatory(struct kimage *image)
return ret;
}
+#else /* !CONFIG_KEXEC_FILE */
+static inline int arch_update_purgatory(struct kimage *image)
+{
+ return 0;
+}
+#endif /* CONFIG_KEXEC_FILE */
int machine_kexec_prepare(struct kimage *image)
{
@@ -329,6 +338,7 @@ void arch_crash_save_vmcoreinfo(void)
/* arch-dependent functionality related to kexec file-based syscall */
+#ifdef CONFIG_KEXEC_FILE
int arch_kexec_kernel_image_probe(struct kimage *image, void *buf,
unsigned long buf_len)
{
@@ -522,3 +532,4 @@ overflow:
(int)ELF64_R_TYPE(rel[i].r_info), value);
return -ENOEXEC;
}
+#endif /* CONFIG_KEXEC_FILE */
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index bf7ef5ce29df..0fa29609b2c4 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -68,6 +68,8 @@ static struct irqaction irq0 = {
void __init setup_default_timer_irq(void)
{
+ if (!nr_legacy_irqs())
+ return;
setup_irq(0, &irq0);
}
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 1fe33987de02..ee61c36d64f8 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -49,7 +49,13 @@ void leave_mm(int cpu)
if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
load_cr3(swapper_pg_dir);
- trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+ /*
+ * This gets called in the idle path where RCU
+ * functions differently. Tracing normally
+ * uses RCU, so we have to call the tracepoint
+ * specially here.
+ */
+ trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
}
}
EXPORT_SYMBOL_GPL(leave_mm);
@@ -174,7 +180,7 @@ void flush_tlb_current_task(void)
*
* This is in units of pages.
*/
-unsigned long tlb_single_page_flush_ceiling = 33;
+static unsigned long tlb_single_page_flush_ceiling __read_mostly = 33;
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long vmflag)
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 5c8cb8043c5a..39ccfbb4a723 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -515,6 +515,48 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
EMIT3(0xC1, add_1reg(b3, dst_reg), imm32);
break;
+ case BPF_ALU | BPF_LSH | BPF_X:
+ case BPF_ALU | BPF_RSH | BPF_X:
+ case BPF_ALU | BPF_ARSH | BPF_X:
+ case BPF_ALU64 | BPF_LSH | BPF_X:
+ case BPF_ALU64 | BPF_RSH | BPF_X:
+ case BPF_ALU64 | BPF_ARSH | BPF_X:
+
+ /* check for bad case when dst_reg == rcx */
+ if (dst_reg == BPF_REG_4) {
+ /* mov r11, dst_reg */
+ EMIT_mov(AUX_REG, dst_reg);
+ dst_reg = AUX_REG;
+ }
+
+ if (src_reg != BPF_REG_4) { /* common case */
+ EMIT1(0x51); /* push rcx */
+
+ /* mov rcx, src_reg */
+ EMIT_mov(BPF_REG_4, src_reg);
+ }
+
+ /* shl %rax, %cl | shr %rax, %cl | sar %rax, %cl */
+ if (BPF_CLASS(insn->code) == BPF_ALU64)
+ EMIT1(add_1mod(0x48, dst_reg));
+ else if (is_ereg(dst_reg))
+ EMIT1(add_1mod(0x40, dst_reg));
+
+ switch (BPF_OP(insn->code)) {
+ case BPF_LSH: b3 = 0xE0; break;
+ case BPF_RSH: b3 = 0xE8; break;
+ case BPF_ARSH: b3 = 0xF8; break;
+ }
+ EMIT2(0xD3, add_1reg(b3, dst_reg));
+
+ if (src_reg != BPF_REG_4)
+ EMIT1(0x59); /* pop rcx */
+
+ if (insn->dst_reg == BPF_REG_4)
+ /* mov dst_reg, r11 */
+ EMIT_mov(insn->dst_reg, AUX_REG);
+ break;
+
case BPF_ALU | BPF_END | BPF_FROM_BE:
switch (imm32) {
case 16:
@@ -930,23 +972,17 @@ out:
kfree(addrs);
}
-static void bpf_jit_free_deferred(struct work_struct *work)
+void bpf_jit_free(struct bpf_prog *fp)
{
- struct bpf_prog *fp = container_of(work, struct bpf_prog, work);
unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
struct bpf_binary_header *header = (void *)addr;
+ if (!fp->jited)
+ goto free_filter;
+
set_memory_rw(addr, header->pages);
module_free(NULL, header);
- kfree(fp);
-}
-void bpf_jit_free(struct bpf_prog *fp)
-{
- if (fp->jited) {
- INIT_WORK(&fp->work, bpf_jit_free_deferred);
- schedule_work(&fp->work);
- } else {
- kfree(fp);
- }
+free_filter:
+ bpf_prog_unlock_free(fp);
}
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 3865116c51fb..b9958c364075 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -229,7 +229,7 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
static void intel_mid_pci_irq_disable(struct pci_dev *dev)
{
- if (!dev->dev.power.is_prepared && dev->irq > 0)
+ if (!mp_should_keep_irq(&dev->dev) && dev->irq > 0)
mp_unmap_irq(dev->irq);
}
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index bc1a2c341891..eb500c2592ad 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -1256,7 +1256,7 @@ static int pirq_enable_irq(struct pci_dev *dev)
static void pirq_disable_irq(struct pci_dev *dev)
{
- if (io_apic_assign_pci_irqs && !dev->dev.power.is_prepared &&
+ if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) &&
dev->irq) {
mp_unmap_irq(dev->irq);
dev->irq = 0;
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index 7fde9ee438a4..899dd2454256 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -11,6 +11,7 @@ targets += purgatory.ro
# sure how to relocate those. Like kexec-tools, use custom flags.
KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -MD -Os -mcmodel=large
+KBUILD_CFLAGS += -m$(BITS)
$(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
$(call if_changed,ld)
@@ -24,7 +25,4 @@ $(obj)/kexec-purgatory.c: $(obj)/purgatory.ro FORCE
$(call if_changed,bin2c)
-# No loaders for 32bits yet.
-ifeq ($(CONFIG_X86_64),y)
- obj-$(CONFIG_KEXEC) += kexec-purgatory.o
-endif
+obj-$(CONFIG_KEXEC_FILE) += kexec-purgatory.o
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 3a617af60d46..49c6c3d94449 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -4,24 +4,23 @@ config ZONE_DMA
config XTENSA
def_bool y
select ARCH_WANT_FRAME_POINTERS
- select HAVE_IDE
- select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
- select VIRT_TO_BUS
- select GENERIC_IRQ_SHOW
- select GENERIC_SCHED_CLOCK
- select MODULES_USE_ELF_RELA
- select GENERIC_PCI_IOMAP
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_WANT_OPTIONAL_GPIOLIB
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
- select IRQ_DOMAIN
- select HAVE_OPROFILE
+ select COMMON_CLK
+ select GENERIC_ATOMIC64
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
+ select GENERIC_SCHED_CLOCK
select HAVE_FUNCTION_TRACER
select HAVE_IRQ_TIME_ACCOUNTING
+ select HAVE_OPROFILE
select HAVE_PERF_EVENTS
- select COMMON_CLK
+ select IRQ_DOMAIN
+ select MODULES_USE_ELF_RELA
+ select VIRT_TO_BUS
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
@@ -62,7 +61,9 @@ config TRACE_IRQFLAGS_SUPPORT
def_bool y
config MMU
- def_bool n
+ bool
+ default n if !XTENSA_VARIANT_CUSTOM
+ default XTENSA_VARIANT_MMU if XTENSA_VARIANT_CUSTOM
config VARIANT_IRQ_SWITCH
def_bool n
@@ -102,8 +103,40 @@ config XTENSA_VARIANT_S6000
select VARIANT_IRQ_SWITCH
select ARCH_REQUIRE_GPIOLIB
select XTENSA_CALIBRATE_CCOUNT
+
+config XTENSA_VARIANT_CUSTOM
+ bool "Custom Xtensa processor configuration"
+ select MAY_HAVE_SMP
+ select HAVE_XTENSA_GPIO32
+ help
+ Select this variant to use a custom Xtensa processor configuration.
+ You will be prompted for a processor variant CORENAME.
endchoice
+config XTENSA_VARIANT_CUSTOM_NAME
+ string "Xtensa Processor Custom Core Variant Name"
+ depends on XTENSA_VARIANT_CUSTOM
+ help
+ Provide the name of a custom Xtensa processor variant.
+ This CORENAME selects arch/xtensa/variant/CORENAME.
+ Dont forget you have to select MMU if you have one.
+
+config XTENSA_VARIANT_NAME
+ string
+ default "dc232b" if XTENSA_VARIANT_DC232B
+ default "dc233c" if XTENSA_VARIANT_DC233C
+ default "fsf" if XTENSA_VARIANT_FSF
+ default "s6000" if XTENSA_VARIANT_S6000
+ default XTENSA_VARIANT_CUSTOM_NAME if XTENSA_VARIANT_CUSTOM
+
+config XTENSA_VARIANT_MMU
+ bool "Core variant has a Full MMU (TLB, Pages, Protection, etc)"
+ depends on XTENSA_VARIANT_CUSTOM
+ default y
+ help
+ Build a Conventional Kernel with full MMU support,
+ ie: it supports a TLB with auto-loading, page protection.
+
config XTENSA_UNALIGNED_USER
bool "Unaligned memory access in use space"
help
@@ -156,13 +189,9 @@ config HOTPLUG_CPU
Say N if you want to disable CPU hotplug.
-config MATH_EMULATION
- bool "Math emulation"
- help
- Can we use information of configuration file?
-
config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
bool "Initialize Xtensa MMU inside the Linux kernel code"
+ depends on MMU
default y
help
Earlier version initialized the MMU in the exception vector
@@ -192,6 +221,7 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
config HIGHMEM
bool "High Memory Support"
+ depends on MMU
help
Linux can use the full amount of RAM in the system by
default. However, the default MMUv2 setup only maps the
@@ -208,6 +238,32 @@ config HIGHMEM
If unsure, say Y.
+config FAST_SYSCALL_XTENSA
+ bool "Enable fast atomic syscalls"
+ default n
+ help
+ fast_syscall_xtensa is a syscall that can make atomic operations
+ on UP kernel when processor has no s32c1i support.
+
+ This syscall is deprecated. It may have issues when called with
+ invalid arguments. It is provided only for backwards compatibility.
+ Only enable it if your userspace software requires it.
+
+ If unsure, say N.
+
+config FAST_SYSCALL_SPILL_REGISTERS
+ bool "Enable spill registers syscall"
+ default n
+ help
+ fast_syscall_spill_registers is a syscall that spills all active
+ register windows of a calling userspace task onto its stack.
+
+ This syscall is deprecated. It may have issues when called with
+ invalid arguments. It is provided only for backwards compatibility.
+ Only enable it if your userspace software requires it.
+
+ If unsure, say N.
+
endmenu
config XTENSA_CALIBRATE_CCOUNT
@@ -250,12 +306,14 @@ config XTENSA_PLATFORM_ISS
config XTENSA_PLATFORM_XT2000
bool "XT2000"
+ select HAVE_IDE
help
XT2000 is the name of Tensilica's feature-rich emulation platform.
This hardware is capable of running a full Linux distribution.
config XTENSA_PLATFORM_S6105
bool "S6105"
+ select HAVE_IDE
select SERIAL_CONSOLE
select NO_IOPORT_MAP
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 81250ece3062..472533064b46 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -4,6 +4,7 @@
# for more details.
#
# Copyright (C) 2001 - 2005 Tensilica Inc.
+# Copyright (C) 2014 Cadence Design Systems Inc.
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
@@ -13,11 +14,7 @@
# Core configuration.
# (Use VAR=<xtensa_config> to use another default compiler.)
-variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf
-variant-$(CONFIG_XTENSA_VARIANT_DC232B) := dc232b
-variant-$(CONFIG_XTENSA_VARIANT_DC233C) := dc233c
-variant-$(CONFIG_XTENSA_VARIANT_S6000) := s6000
-variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom
+variant-y := $(patsubst "%",%,$(CONFIG_XTENSA_VARIANT_NAME))
VARIANT = $(variant-y)
export VARIANT
diff --git a/arch/xtensa/boot/dts/kc705.dts b/arch/xtensa/boot/dts/kc705.dts
index 742a347be67a..c4d17a34ab86 100644
--- a/arch/xtensa/boot/dts/kc705.dts
+++ b/arch/xtensa/boot/dts/kc705.dts
@@ -4,8 +4,11 @@
/ {
compatible = "cdns,xtensa-kc705";
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000";
+ };
memory@0 {
device_type = "memory";
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x38000000>;
};
};
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index f6000fe05119..721df1214bc3 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -66,7 +66,6 @@ CONFIG_XTENSA_ARCH_LINUX_BE=y
CONFIG_MMU=y
# CONFIG_XTENSA_UNALIGNED_USER is not set
# CONFIG_PREEMPT is not set
-# CONFIG_MATH_EMULATION is not set
# CONFIG_HIGHMEM is not set
#
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 1493c68352d1..b966baf82cae 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -146,7 +146,6 @@ CONFIG_XTENSA_VARIANT_FSF=y
# CONFIG_XTENSA_VARIANT_S6000 is not set
# CONFIG_XTENSA_UNALIGNED_USER is not set
# CONFIG_PREEMPT is not set
-# CONFIG_MATH_EMULATION is not set
CONFIG_XTENSA_CALIBRATE_CCOUNT=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_XTENSA_ISS_NETWORK=y
@@ -308,7 +307,7 @@ CONFIG_MISC_DEVICES=y
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
+# CONFIG_HAVE_IDE is not set
# CONFIG_IDE is not set
#
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index 12a492ab6d17..9471265b8ca6 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -109,7 +109,6 @@ CONFIG_VARIANT_IRQ_SWITCH=y
CONFIG_XTENSA_VARIANT_S6000=y
# CONFIG_XTENSA_UNALIGNED_USER is not set
CONFIG_PREEMPT=y
-# CONFIG_MATH_EMULATION is not set
# CONFIG_HIGHMEM is not set
CONFIG_XTENSA_CALIBRATE_CCOUNT=y
CONFIG_SERIAL_CONSOLE=y
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index 555a98a18453..e72aaca7a77f 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -37,6 +37,7 @@
* specials for cache aliasing:
*
* __flush_invalidate_dcache_page_alias(vaddr,paddr)
+ * __invalidate_dcache_page_alias(vaddr,paddr)
* __invalidate_icache_page_alias(vaddr,paddr)
*/
@@ -62,6 +63,7 @@ extern void __flush_invalidate_dcache_range(unsigned long, unsigned long);
#if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE)
extern void __flush_invalidate_dcache_page_alias(unsigned long, unsigned long);
+extern void __invalidate_dcache_page_alias(unsigned long, unsigned long);
#else
static inline void __flush_invalidate_dcache_page_alias(unsigned long virt,
unsigned long phys) { }
diff --git a/arch/xtensa/include/asm/fixmap.h b/arch/xtensa/include/asm/fixmap.h
index 9f6c33d0428a..62b507deea9d 100644
--- a/arch/xtensa/include/asm/fixmap.h
+++ b/arch/xtensa/include/asm/fixmap.h
@@ -23,8 +23,8 @@
* Here we define all the compile-time 'special' virtual
* addresses. The point is to have a constant address at
* compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
- * from the end of the consistent memory region backwards.
+ * in the boot process. We allocate these special addresses
+ * from the start of the consistent memory region upwards.
* Also this lets us do fail-safe vmalloc(), we
* can guarantee that these special addresses and
* vmalloc()-ed addresses never overlap.
@@ -38,7 +38,8 @@ enum fixed_addresses {
#ifdef CONFIG_HIGHMEM
/* reserved pte's for temporary kernel mappings */
FIX_KMAP_BEGIN,
- FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_TYPE_NR * NR_CPUS) - 1,
+ FIX_KMAP_END = FIX_KMAP_BEGIN +
+ (KM_TYPE_NR * NR_CPUS * DCACHE_N_COLORS) - 1,
#endif
__end_of_fixed_addresses
};
@@ -47,7 +48,28 @@ enum fixed_addresses {
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START ((FIXADDR_TOP - FIXADDR_SIZE) & PMD_MASK)
-#include <asm-generic/fixmap.h>
+#define __fix_to_virt(x) (FIXADDR_START + ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) (((x) - FIXADDR_START) >> PAGE_SHIFT)
+
+#ifndef __ASSEMBLY__
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without translation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+#endif
#define kmap_get_fixmap_pte(vaddr) \
pte_offset_kernel( \
diff --git a/arch/xtensa/include/asm/highmem.h b/arch/xtensa/include/asm/highmem.h
index 2653ef5d55f1..2c7901edffaf 100644
--- a/arch/xtensa/include/asm/highmem.h
+++ b/arch/xtensa/include/asm/highmem.h
@@ -12,19 +12,55 @@
#ifndef _XTENSA_HIGHMEM_H
#define _XTENSA_HIGHMEM_H
+#include <linux/wait.h>
#include <asm/cacheflush.h>
#include <asm/fixmap.h>
#include <asm/kmap_types.h>
#include <asm/pgtable.h>
-#define PKMAP_BASE (FIXADDR_START - PMD_SIZE)
-#define LAST_PKMAP PTRS_PER_PTE
+#define PKMAP_BASE ((FIXADDR_START - \
+ (LAST_PKMAP + 1) * PAGE_SIZE) & PMD_MASK)
+#define LAST_PKMAP (PTRS_PER_PTE * DCACHE_N_COLORS)
#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT)
#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
#define kmap_prot PAGE_KERNEL
+#if DCACHE_WAY_SIZE > PAGE_SIZE
+#define get_pkmap_color get_pkmap_color
+static inline int get_pkmap_color(struct page *page)
+{
+ return DCACHE_ALIAS(page_to_phys(page));
+}
+
+extern unsigned int last_pkmap_nr_arr[];
+
+static inline unsigned int get_next_pkmap_nr(unsigned int color)
+{
+ last_pkmap_nr_arr[color] =
+ (last_pkmap_nr_arr[color] + DCACHE_N_COLORS) & LAST_PKMAP_MASK;
+ return last_pkmap_nr_arr[color] + color;
+}
+
+static inline int no_more_pkmaps(unsigned int pkmap_nr, unsigned int color)
+{
+ return pkmap_nr < DCACHE_N_COLORS;
+}
+
+static inline int get_pkmap_entries_count(unsigned int color)
+{
+ return LAST_PKMAP / DCACHE_N_COLORS;
+}
+
+extern wait_queue_head_t pkmap_map_wait_arr[];
+
+static inline wait_queue_head_t *get_pkmap_wait_queue_head(unsigned int color)
+{
+ return pkmap_map_wait_arr + color;
+}
+#endif
+
extern pte_t *pkmap_page_table;
void *kmap_high(struct page *page);
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index 47f582333f6b..abe24c6f8b2f 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -78,7 +78,9 @@
# define DCACHE_ALIAS_EQ(a,b) ((((a) ^ (b)) & DCACHE_ALIAS_MASK) == 0)
#else
# define DCACHE_ALIAS_ORDER 0
+# define DCACHE_ALIAS(a) ((void)(a), 0)
#endif
+#define DCACHE_N_COLORS (1 << DCACHE_ALIAS_ORDER)
#if ICACHE_WAY_SIZE > PAGE_SIZE
# define ICACHE_ALIAS_ORDER (ICACHE_WAY_SHIFT - PAGE_SHIFT)
@@ -134,6 +136,7 @@ static inline __attribute_const__ int get_order(unsigned long size)
#endif
struct page;
+struct vm_area_struct;
extern void clear_page(void *page);
extern void copy_page(void *to, void *from);
@@ -143,8 +146,15 @@ extern void copy_page(void *to, void *from);
*/
#if DCACHE_WAY_SIZE > PAGE_SIZE
-extern void clear_user_page(void*, unsigned long, struct page*);
-extern void copy_user_page(void*, void*, unsigned long, struct page*);
+extern void clear_page_alias(void *vaddr, unsigned long paddr);
+extern void copy_page_alias(void *to, void *from,
+ unsigned long to_paddr, unsigned long from_paddr);
+
+#define clear_user_highpage clear_user_highpage
+void clear_user_highpage(struct page *page, unsigned long vaddr);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+void copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr, struct vm_area_struct *vma);
#else
# define clear_user_page(page, vaddr, pg) clear_page(page)
# define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index 4b0ca35a93b1..b2173e5da601 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -67,7 +67,12 @@
#define VMALLOC_START 0xC0000000
#define VMALLOC_END 0xC7FEFFFF
#define TLBTEMP_BASE_1 0xC7FF0000
-#define TLBTEMP_BASE_2 0xC7FF8000
+#define TLBTEMP_BASE_2 (TLBTEMP_BASE_1 + DCACHE_WAY_SIZE)
+#if 2 * DCACHE_WAY_SIZE > ICACHE_WAY_SIZE
+#define TLBTEMP_SIZE (2 * DCACHE_WAY_SIZE)
+#else
+#define TLBTEMP_SIZE ICACHE_WAY_SIZE
+#endif
/*
* For the Xtensa architecture, the PTE layout is as follows:
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
index fd686dc45d1a..c7211e7e182d 100644
--- a/arch/xtensa/include/asm/uaccess.h
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -52,7 +52,12 @@
*/
.macro get_fs ad, sp
GET_CURRENT(\ad,\sp)
+#if THREAD_CURRENT_DS > 1020
+ addi \ad, \ad, TASK_THREAD
+ l32i \ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
+#else
l32i \ad, \ad, THREAD_CURRENT_DS
+#endif
.endm
/*
diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h
index b4cb1100c0fb..a47909f0c34b 100644
--- a/arch/xtensa/include/uapi/asm/ioctls.h
+++ b/arch/xtensa/include/uapi/asm/ioctls.h
@@ -28,17 +28,17 @@
#define TCSETSW 0x5403
#define TCSETSF 0x5404
-#define TCGETA _IOR('t', 23, struct termio)
-#define TCSETA _IOW('t', 24, struct termio)
-#define TCSETAW _IOW('t', 25, struct termio)
-#define TCSETAF _IOW('t', 28, struct termio)
+#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */
+#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */
+#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */
+#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */
#define TCSBRK _IO('t', 29)
#define TCXONC _IO('t', 30)
#define TCFLSH _IO('t', 31)
-#define TIOCSWINSZ _IOW('t', 103, struct winsize)
-#define TIOCGWINSZ _IOR('t', 104, struct winsize)
+#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */
+#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */
#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
@@ -88,7 +88,6 @@
#define TIOCSETD _IOW('T', 35, int)
#define TIOCGETD _IOR('T', 36, int)
#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/
-#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/
#define TIOCSBRK _IO('T', 39) /* BSD compatibility */
#define TIOCCBRK _IO('T', 40) /* BSD compatibility */
#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/
@@ -114,8 +113,10 @@
#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */
-#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */
+#define TIOCSERGETMULTI 0x80a8545a /* Get multiport config */
+ /* _IOR('T', 90, struct serial_multiport_struct) */
+#define TIOCSERSETMULTI 0x40a8545b /* Set multiport config */
+ /* _IOW('T', 91, struct serial_multiport_struct) */
#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h
index b9395529f02d..8883fc877c5c 100644
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@@ -739,7 +739,10 @@ __SYSCALL(334, sys_sched_setattr, 2)
#define __NR_sched_getattr 335
__SYSCALL(335, sys_sched_getattr, 3)
-#define __NR_syscall_count 336
+#define __NR_renameat2 336
+__SYSCALL(336, sys_renameat2, 5)
+
+#define __NR_syscall_count 337
/*
* sysxtensa syscall handler
diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S
index d4cef6039a5c..890004af03a9 100644
--- a/arch/xtensa/kernel/align.S
+++ b/arch/xtensa/kernel/align.S
@@ -8,6 +8,7 @@
* this archive for more details.
*
* Copyright (C) 2001 - 2005 Tensilica, Inc.
+ * Copyright (C) 2014 Cadence Design Systems Inc.
*
* Rewritten by Chris Zankel <chris@zankel.net>
*
@@ -174,6 +175,10 @@ ENTRY(fast_unaligned)
s32i a0, a2, PT_AREG2
s32i a3, a2, PT_AREG3
+ rsr a3, excsave1
+ movi a4, fast_unaligned_fixup
+ s32i a4, a3, EXC_TABLE_FIXUP
+
/* Keep value of SAR in a0 */
rsr a0, sar
@@ -225,10 +230,6 @@ ENTRY(fast_unaligned)
addx8 a5, a6, a5
jx a5 # jump into table
- /* Invalid instruction, CRITICAL! */
-.Linvalid_instruction_load:
- j .Linvalid_instruction
-
/* Load: Load memory address. */
.Lload: movi a3, ~3
@@ -272,18 +273,6 @@ ENTRY(fast_unaligned)
/* Set target register. */
1:
-
-#if XCHAL_HAVE_LOOPS
- rsr a5, lend # check if we reached LEND
- bne a7, a5, 1f
- rsr a5, lcount # and LCOUNT != 0
- beqz a5, 1f
- addi a5, a5, -1 # decrement LCOUNT and set
- rsr a7, lbeg # set PC to LBEGIN
- wsr a5, lcount
-#endif
-
-1: wsr a7, epc1 # skip load instruction
extui a4, a4, INSN_T, 4 # extract target register
movi a5, .Lload_table
addx8 a4, a4, a5
@@ -326,6 +315,35 @@ ENTRY(fast_unaligned)
mov a3, a14 ; _j 1f; .align 8
mov a3, a15 ; _j 1f; .align 8
+ /* We cannot handle this exception. */
+
+ .extern _kernel_exception
+.Linvalid_instruction_load:
+.Linvalid_instruction_store:
+
+ movi a4, 0
+ rsr a3, excsave1
+ s32i a4, a3, EXC_TABLE_FIXUP
+
+ /* Restore a4...a8 and SAR, set SP, and jump to default exception. */
+
+ l32i a8, a2, PT_AREG8
+ l32i a7, a2, PT_AREG7
+ l32i a6, a2, PT_AREG6
+ l32i a5, a2, PT_AREG5
+ l32i a4, a2, PT_AREG4
+ wsr a0, sar
+ mov a1, a2
+
+ rsr a0, ps
+ bbsi.l a0, PS_UM_BIT, 2f # jump if user mode
+
+ movi a0, _kernel_exception
+ jx a0
+
+2: movi a0, _user_exception
+ jx a0
+
1: # a7: instruction pointer, a4: instruction, a3: value
movi a6, 0 # mask: ffffffff:00000000
@@ -353,17 +371,6 @@ ENTRY(fast_unaligned)
/* Get memory address */
1:
-#if XCHAL_HAVE_LOOPS
- rsr a4, lend # check if we reached LEND
- bne a7, a4, 1f
- rsr a4, lcount # and LCOUNT != 0
- beqz a4, 1f
- addi a4, a4, -1 # decrement LCOUNT and set
- rsr a7, lbeg # set PC to LBEGIN
- wsr a4, lcount
-#endif
-
-1: wsr a7, epc1 # skip store instruction
movi a4, ~3
and a4, a4, a8 # align memory address
@@ -375,25 +382,25 @@ ENTRY(fast_unaligned)
#endif
__ssa8r a8
- __src_b a7, a5, a6 # lo-mask F..F0..0 (BE) 0..0F..F (LE)
+ __src_b a8, a5, a6 # lo-mask F..F0..0 (BE) 0..0F..F (LE)
__src_b a6, a6, a5 # hi-mask 0..0F..F (BE) F..F0..0 (LE)
#ifdef UNALIGNED_USER_EXCEPTION
l32e a5, a4, -8
#else
l32i a5, a4, 0 # load lower address word
#endif
- and a5, a5, a7 # mask
- __sh a7, a3 # shift value
- or a5, a5, a7 # or with original value
+ and a5, a5, a8 # mask
+ __sh a8, a3 # shift value
+ or a5, a5, a8 # or with original value
#ifdef UNALIGNED_USER_EXCEPTION
s32e a5, a4, -8
- l32e a7, a4, -4
+ l32e a8, a4, -4
#else
s32i a5, a4, 0 # store
- l32i a7, a4, 4 # same for upper address word
+ l32i a8, a4, 4 # same for upper address word
#endif
__sl a5, a3
- and a6, a7, a6
+ and a6, a8, a6
or a6, a6, a5
#ifdef UNALIGNED_USER_EXCEPTION
s32e a6, a4, -4
@@ -401,9 +408,27 @@ ENTRY(fast_unaligned)
s32i a6, a4, 4
#endif
- /* Done. restore stack and return */
-
.Lexit:
+#if XCHAL_HAVE_LOOPS
+ rsr a4, lend # check if we reached LEND
+ bne a7, a4, 1f
+ rsr a4, lcount # and LCOUNT != 0
+ beqz a4, 1f
+ addi a4, a4, -1 # decrement LCOUNT and set
+ rsr a7, lbeg # set PC to LBEGIN
+ wsr a4, lcount
+#endif
+
+1: wsr a7, epc1 # skip emulated instruction
+
+ /* Update icount if we're single-stepping in userspace. */
+ rsr a4, icountlevel
+ beqz a4, 1f
+ bgeui a4, LOCKLEVEL + 1, 1f
+ rsr a4, icount
+ addi a4, a4, 1
+ wsr a4, icount
+1:
movi a4, 0
rsr a3, excsave1
s32i a4, a3, EXC_TABLE_FIXUP
@@ -424,31 +449,40 @@ ENTRY(fast_unaligned)
l32i a2, a2, PT_AREG2
rfe
- /* We cannot handle this exception. */
+ENDPROC(fast_unaligned)
- .extern _kernel_exception
-.Linvalid_instruction_store:
-.Linvalid_instruction:
+ENTRY(fast_unaligned_fixup)
- /* Restore a4...a8 and SAR, set SP, and jump to default exception. */
+ l32i a2, a3, EXC_TABLE_DOUBLE_SAVE
+ wsr a3, excsave1
l32i a8, a2, PT_AREG8
l32i a7, a2, PT_AREG7
l32i a6, a2, PT_AREG6
l32i a5, a2, PT_AREG5
l32i a4, a2, PT_AREG4
+ l32i a0, a2, PT_AREG2
+ xsr a0, depc # restore depc and a0
wsr a0, sar
- mov a1, a2
+
+ rsr a0, exccause
+ s32i a0, a2, PT_DEPC # mark as a regular exception
rsr a0, ps
- bbsi.l a2, PS_UM_BIT, 1f # jump if user mode
+ bbsi.l a0, PS_UM_BIT, 1f # jump if user mode
- movi a0, _kernel_exception
+ rsr a0, exccause
+ addx4 a0, a0, a3 # find entry in table
+ l32i a0, a0, EXC_TABLE_FAST_KERNEL # load handler
+ l32i a3, a2, PT_AREG3
jx a0
-
-1: movi a0, _user_exception
+1:
+ rsr a0, exccause
+ addx4 a0, a0, a3 # find entry in table
+ l32i a0, a0, EXC_TABLE_FAST_USER # load handler
+ l32i a3, a2, PT_AREG3
jx a0
-ENDPROC(fast_unaligned)
+ENDPROC(fast_unaligned_fixup)
#endif /* XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index ef7f4990722b..82bbfa5a05b3 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -986,6 +986,8 @@ ENDPROC(fast_syscall_unrecoverable)
* j done
*/
+#ifdef CONFIG_FAST_SYSCALL_XTENSA
+
#define TRY \
.section __ex_table, "a"; \
.word 66f, 67f; \
@@ -1001,9 +1003,8 @@ ENTRY(fast_syscall_xtensa)
movi a7, 4 # sizeof(unsigned int)
access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp
- addi a6, a6, -1 # assuming SYS_XTENSA_ATOMIC_SET = 1
- _bgeui a6, SYS_XTENSA_COUNT - 1, .Lill
- _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP - 1, .Lnswp
+ _bgeui a6, SYS_XTENSA_COUNT, .Lill
+ _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP, .Lnswp
/* Fall through for ATOMIC_CMP_SWP. */
@@ -1015,27 +1016,26 @@ TRY s32i a5, a3, 0 # different, modify value
l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, 1 # and return 1
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
1: l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, 0 # return 0 (note that we cannot set
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
.Lnswp: /* Atomic set, add, and exg_add. */
TRY l32i a7, a3, 0 # orig
+ addi a6, a6, -SYS_XTENSA_ATOMIC_SET
add a0, a4, a7 # + arg
moveqz a0, a4, a6 # set
+ addi a6, a6, SYS_XTENSA_ATOMIC_SET
TRY s32i a0, a3, 0 # write new value
mov a0, a2
mov a2, a7
l32i a7, a0, PT_AREG7 # restore a7
l32i a0, a0, PT_AREG0 # restore a0
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
CATCH
@@ -1044,13 +1044,25 @@ CATCH
movi a2, -EFAULT
rfe
-.Lill: l32i a7, a2, PT_AREG0 # restore a7
+.Lill: l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, -EINVAL
rfe
ENDPROC(fast_syscall_xtensa)
+#else /* CONFIG_FAST_SYSCALL_XTENSA */
+
+ENTRY(fast_syscall_xtensa)
+
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -ENOSYS
+ rfe
+
+ENDPROC(fast_syscall_xtensa)
+
+#endif /* CONFIG_FAST_SYSCALL_XTENSA */
+
/* fast_syscall_spill_registers.
*
@@ -1066,6 +1078,8 @@ ENDPROC(fast_syscall_xtensa)
* Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
*/
+#ifdef CONFIG_FAST_SYSCALL_SPILL_REGISTERS
+
ENTRY(fast_syscall_spill_registers)
/* Register a FIXUP handler (pass current wb as a parameter) */
@@ -1400,6 +1414,18 @@ ENTRY(fast_syscall_spill_registers_fixup_return)
ENDPROC(fast_syscall_spill_registers_fixup_return)
+#else /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */
+
+ENTRY(fast_syscall_spill_registers)
+
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -ENOSYS
+ rfe
+
+ENDPROC(fast_syscall_spill_registers)
+
+#endif /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */
+
#ifdef CONFIG_MMU
/*
* We should never get here. Bail out!
@@ -1565,7 +1591,7 @@ ENTRY(fast_second_level_miss)
rsr a0, excvaddr
bltu a0, a3, 2f
- addi a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT))
+ addi a1, a0, -TLBTEMP_SIZE
bgeu a1, a3, 2f
/* Check if we have to restore an ITLB mapping. */
@@ -1820,7 +1846,6 @@ ENTRY(_switch_to)
entry a1, 16
- mov a10, a2 # preserve 'prev' (a2)
mov a11, a3 # and 'next' (a3)
l32i a4, a2, TASK_THREAD_INFO
@@ -1828,8 +1853,14 @@ ENTRY(_switch_to)
save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
- s32i a0, a10, THREAD_RA # save return address
- s32i a1, a10, THREAD_SP # save stack pointer
+#if THREAD_RA > 1020 || THREAD_SP > 1020
+ addi a10, a2, TASK_THREAD
+ s32i a0, a10, THREAD_RA - TASK_THREAD # save return address
+ s32i a1, a10, THREAD_SP - TASK_THREAD # save stack pointer
+#else
+ s32i a0, a2, THREAD_RA # save return address
+ s32i a1, a2, THREAD_SP # save stack pointer
+#endif
/* Disable ints while we manipulate the stack pointer. */
@@ -1870,7 +1901,6 @@ ENTRY(_switch_to)
load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
wsr a14, ps
- mov a2, a10 # return 'prev'
rsync
retw
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 2d9cc6dbfd78..e8b76b8e4b29 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -49,9 +49,8 @@ dma_alloc_coherent(struct device *dev,size_t size,dma_addr_t *handle,gfp_t flag)
/* We currently don't support coherent memory outside KSEG */
- if (ret < XCHAL_KSEG_CACHED_VADDR
- || ret >= XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE)
- BUG();
+ BUG_ON(ret < XCHAL_KSEG_CACHED_VADDR ||
+ ret > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1);
if (ret != 0) {
@@ -68,10 +67,11 @@ EXPORT_SYMBOL(dma_alloc_coherent);
void dma_free_coherent(struct device *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
- long addr=(long)vaddr+XCHAL_KSEG_CACHED_VADDR-XCHAL_KSEG_BYPASS_VADDR;
+ unsigned long addr = (unsigned long)vaddr +
+ XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
- if (addr < 0 || addr >= XCHAL_KSEG_SIZE)
- BUG();
+ BUG_ON(addr < XCHAL_KSEG_CACHED_VADDR ||
+ addr > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1);
free_pages(addr, get_order(size));
}
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 40b5a3771fb0..4d02e38514f5 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -571,6 +571,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
};
on_each_cpu(ipi_flush_icache_range, &fd, 1);
}
+EXPORT_SYMBOL(flush_icache_range);
/* ------------------------------------------------------------------------- */
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index eebbfd8c26fc..9d2f45f010ef 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -101,9 +101,8 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = {
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
#ifdef CONFIG_XTENSA_UNALIGNED_USER
{ EXCCAUSE_UNALIGNED, USER, fast_unaligned },
-#else
-{ EXCCAUSE_UNALIGNED, 0, do_unaligned_user },
#endif
+{ EXCCAUSE_UNALIGNED, 0, do_unaligned_user },
{ EXCCAUSE_UNALIGNED, KRNL, fast_unaligned },
#endif
#ifdef CONFIG_MMU
@@ -264,7 +263,6 @@ do_illegal_instruction(struct pt_regs *regs)
*/
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
-#ifndef CONFIG_XTENSA_UNALIGNED_USER
void
do_unaligned_user (struct pt_regs *regs)
{
@@ -286,7 +284,6 @@ do_unaligned_user (struct pt_regs *regs)
}
#endif
-#endif
void
do_debug(struct pt_regs *regs)
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index 8453e6e39895..1b397a902292 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -454,8 +454,14 @@ _DoubleExceptionVector_WindowOverflow:
s32i a0, a2, PT_DEPC
_DoubleExceptionVector_handle_exception:
+ addi a0, a0, -EXCCAUSE_UNALIGNED
+ beqz a0, 2f
addx4 a0, a0, a3
- l32i a0, a0, EXC_TABLE_FAST_USER
+ l32i a0, a0, EXC_TABLE_FAST_USER + 4 * EXCCAUSE_UNALIGNED
+ xsr a3, excsave1
+ jx a0
+2:
+ movi a0, user_exception
xsr a3, excsave1
jx a0
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index d16db6df86f8..fc1bc2ba8d5d 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -269,13 +269,13 @@ SECTIONS
.UserExceptionVector.literal)
SECTION_VECTOR (_DoubleExceptionVector_literal,
.DoubleExceptionVector.literal,
- DOUBLEEXC_VECTOR_VADDR - 40,
+ DOUBLEEXC_VECTOR_VADDR - 48,
SIZEOF(.UserExceptionVector.text),
.UserExceptionVector.text)
SECTION_VECTOR (_DoubleExceptionVector_text,
.DoubleExceptionVector.text,
DOUBLEEXC_VECTOR_VADDR,
- 40,
+ 48,
.DoubleExceptionVector.literal)
. = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index 63cbb867dadd..d75aa1476da7 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -59,9 +59,68 @@
*
*/
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && defined(CONFIG_HIGHMEM)
-#error "HIGHMEM is not supported on cores with aliasing cache."
-#endif
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+static inline void kmap_invalidate_coherent(struct page *page,
+ unsigned long vaddr)
+{
+ if (!DCACHE_ALIAS_EQ(page_to_phys(page), vaddr)) {
+ unsigned long kvaddr;
+
+ if (!PageHighMem(page)) {
+ kvaddr = (unsigned long)page_to_virt(page);
+
+ __invalidate_dcache_page(kvaddr);
+ } else {
+ kvaddr = TLBTEMP_BASE_1 +
+ (page_to_phys(page) & DCACHE_ALIAS_MASK);
+
+ __invalidate_dcache_page_alias(kvaddr,
+ page_to_phys(page));
+ }
+ }
+}
+
+static inline void *coherent_kvaddr(struct page *page, unsigned long base,
+ unsigned long vaddr, unsigned long *paddr)
+{
+ if (PageHighMem(page) || !DCACHE_ALIAS_EQ(page_to_phys(page), vaddr)) {
+ *paddr = page_to_phys(page);
+ return (void *)(base + (vaddr & DCACHE_ALIAS_MASK));
+ } else {
+ *paddr = 0;
+ return page_to_virt(page);
+ }
+}
+
+void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+ unsigned long paddr;
+ void *kvaddr = coherent_kvaddr(page, TLBTEMP_BASE_1, vaddr, &paddr);
+
+ pagefault_disable();
+ kmap_invalidate_coherent(page, vaddr);
+ set_bit(PG_arch_1, &page->flags);
+ clear_page_alias(kvaddr, paddr);
+ pagefault_enable();
+}
+
+void copy_user_highpage(struct page *dst, struct page *src,
+ unsigned long vaddr, struct vm_area_struct *vma)
+{
+ unsigned long dst_paddr, src_paddr;
+ void *dst_vaddr = coherent_kvaddr(dst, TLBTEMP_BASE_1, vaddr,
+ &dst_paddr);
+ void *src_vaddr = coherent_kvaddr(src, TLBTEMP_BASE_2, vaddr,
+ &src_paddr);
+
+ pagefault_disable();
+ kmap_invalidate_coherent(dst, vaddr);
+ set_bit(PG_arch_1, &dst->flags);
+ copy_page_alias(dst_vaddr, src_vaddr, dst_paddr, src_paddr);
+ pagefault_enable();
+}
+
+#endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
@@ -103,7 +162,8 @@ void flush_dcache_page(struct page *page)
if (!alias && !mapping)
return;
- __flush_invalidate_dcache_page((long)page_address(page));
+ virt = TLBTEMP_BASE_1 + (phys & DCACHE_ALIAS_MASK);
+ __flush_invalidate_dcache_page_alias(virt, phys);
virt = TLBTEMP_BASE_1 + (temp & DCACHE_ALIAS_MASK);
@@ -168,13 +228,12 @@ update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
if (!PageReserved(page) && test_bit(PG_arch_1, &page->flags)) {
-
- unsigned long paddr = (unsigned long) page_address(page);
unsigned long phys = page_to_phys(page);
- unsigned long tmp = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK);
-
- __flush_invalidate_dcache_page(paddr);
+ unsigned long tmp;
+ tmp = TLBTEMP_BASE_1 + (phys & DCACHE_ALIAS_MASK);
+ __flush_invalidate_dcache_page_alias(tmp, phys);
+ tmp = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK);
__flush_invalidate_dcache_page_alias(tmp, phys);
__invalidate_icache_page_alias(tmp, phys);
diff --git a/arch/xtensa/mm/highmem.c b/arch/xtensa/mm/highmem.c
index 17a8c0d6fd17..8cfb71ec0937 100644
--- a/arch/xtensa/mm/highmem.c
+++ b/arch/xtensa/mm/highmem.c
@@ -14,23 +14,45 @@
static pte_t *kmap_pte;
+#if DCACHE_WAY_SIZE > PAGE_SIZE
+unsigned int last_pkmap_nr_arr[DCACHE_N_COLORS];
+wait_queue_head_t pkmap_map_wait_arr[DCACHE_N_COLORS];
+
+static void __init kmap_waitqueues_init(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(pkmap_map_wait_arr); ++i)
+ init_waitqueue_head(pkmap_map_wait_arr + i);
+}
+#else
+static inline void kmap_waitqueues_init(void)
+{
+}
+#endif
+
+static inline enum fixed_addresses kmap_idx(int type, unsigned long color)
+{
+ return (type + KM_TYPE_NR * smp_processor_id()) * DCACHE_N_COLORS +
+ color;
+}
+
void *kmap_atomic(struct page *page)
{
enum fixed_addresses idx;
unsigned long vaddr;
- int type;
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
- type = kmap_atomic_idx_push();
- idx = type + KM_TYPE_NR * smp_processor_id();
+ idx = kmap_idx(kmap_atomic_idx_push(),
+ DCACHE_ALIAS(page_to_phys(page)));
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte - idx)));
+ BUG_ON(!pte_none(*(kmap_pte + idx)));
#endif
- set_pte(kmap_pte - idx, mk_pte(page, PAGE_KERNEL_EXEC));
+ set_pte(kmap_pte + idx, mk_pte(page, PAGE_KERNEL_EXEC));
return (void *)vaddr;
}
@@ -38,12 +60,10 @@ EXPORT_SYMBOL(kmap_atomic);
void __kunmap_atomic(void *kvaddr)
{
- int idx, type;
-
if (kvaddr >= (void *)FIXADDR_START &&
kvaddr < (void *)FIXADDR_TOP) {
- type = kmap_atomic_idx();
- idx = type + KM_TYPE_NR * smp_processor_id();
+ int idx = kmap_idx(kmap_atomic_idx(),
+ DCACHE_ALIAS((unsigned long)kvaddr));
/*
* Force other mappings to Oops if they'll try to access this
@@ -51,7 +71,7 @@ void __kunmap_atomic(void *kvaddr)
* is a bad idea also, in case the page changes cacheability
* attributes or becomes a protected page in a hypervisor.
*/
- pte_clear(&init_mm, kvaddr, kmap_pte - idx);
+ pte_clear(&init_mm, kvaddr, kmap_pte + idx);
local_flush_tlb_kernel_range((unsigned long)kvaddr,
(unsigned long)kvaddr + PAGE_SIZE);
@@ -69,4 +89,5 @@ void __init kmap_init(void)
/* cache the first kmap pte */
kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+ kmap_waitqueues_init();
}
diff --git a/arch/xtensa/mm/misc.S b/arch/xtensa/mm/misc.S
index 1f68558dbcc2..11a01c3e9cea 100644
--- a/arch/xtensa/mm/misc.S
+++ b/arch/xtensa/mm/misc.S
@@ -110,41 +110,24 @@ ENTRY(__tlbtemp_mapping_start)
#if (DCACHE_WAY_SIZE > PAGE_SIZE)
/*
- * clear_user_page (void *addr, unsigned long vaddr, struct page *page)
- * a2 a3 a4
+ * clear_page_alias(void *addr, unsigned long paddr)
+ * a2 a3
*/
-ENTRY(clear_user_page)
+ENTRY(clear_page_alias)
entry a1, 32
- /* Mark page dirty and determine alias. */
+ /* Skip setting up a temporary DTLB if not aliased low page. */
- movi a7, (1 << PG_ARCH_1)
- l32i a5, a4, PAGE_FLAGS
- xor a6, a2, a3
- extui a3, a3, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- extui a6, a6, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- or a5, a5, a7
- slli a3, a3, PAGE_SHIFT
- s32i a5, a4, PAGE_FLAGS
+ movi a5, PAGE_OFFSET
+ movi a6, 0
+ beqz a3, 1f
- /* Skip setting up a temporary DTLB if not aliased. */
-
- beqz a6, 1f
-
- /* Invalidate kernel page. */
-
- mov a10, a2
- call8 __invalidate_dcache_page
-
- /* Setup a temporary DTLB with the color of the VPN */
-
- movi a4, ((PAGE_KERNEL | _PAGE_HW_WRITE) - PAGE_OFFSET) & 0xffffffff
- movi a5, TLBTEMP_BASE_1 # virt
- add a6, a2, a4 # ppn
- add a2, a5, a3 # add 'color'
+ /* Setup a temporary DTLB for the addr. */
+ addi a6, a3, (PAGE_KERNEL | _PAGE_HW_WRITE)
+ mov a4, a2
wdtlb a6, a2
dsync
@@ -165,62 +148,43 @@ ENTRY(clear_user_page)
/* We need to invalidate the temporary idtlb entry, if any. */
-1: addi a2, a2, -PAGE_SIZE
- idtlb a2
+1: idtlb a4
dsync
retw
-ENDPROC(clear_user_page)
+ENDPROC(clear_page_alias)
/*
- * copy_page_user (void *to, void *from, unsigned long vaddr, struct page *page)
- * a2 a3 a4 a5
+ * copy_page_alias(void *to, void *from,
+ * a2 a3
+ * unsigned long to_paddr, unsigned long from_paddr)
+ * a4 a5
*/
-ENTRY(copy_user_page)
+ENTRY(copy_page_alias)
entry a1, 32
- /* Mark page dirty and determine alias for destination. */
-
- movi a8, (1 << PG_ARCH_1)
- l32i a9, a5, PAGE_FLAGS
- xor a6, a2, a4
- xor a7, a3, a4
- extui a4, a4, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- extui a6, a6, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- extui a7, a7, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- or a9, a9, a8
- slli a4, a4, PAGE_SHIFT
- s32i a9, a5, PAGE_FLAGS
- movi a5, ((PAGE_KERNEL | _PAGE_HW_WRITE) - PAGE_OFFSET) & 0xffffffff
-
- beqz a6, 1f
-
- /* Invalidate dcache */
-
- mov a10, a2
- call8 __invalidate_dcache_page
+ /* Skip setting up a temporary DTLB for destination if not aliased. */
- /* Setup a temporary DTLB with a matching color. */
+ movi a6, 0
+ movi a7, 0
+ beqz a4, 1f
- movi a8, TLBTEMP_BASE_1 # base
- add a6, a2, a5 # ppn
- add a2, a8, a4 # add 'color'
+ /* Setup a temporary DTLB for destination. */
+ addi a6, a4, (PAGE_KERNEL | _PAGE_HW_WRITE)
wdtlb a6, a2
dsync
- /* Skip setting up a temporary DTLB for destination if not aliased. */
+ /* Skip setting up a temporary DTLB for source if not aliased. */
-1: beqz a7, 1f
+1: beqz a5, 1f
- /* Setup a temporary DTLB with a matching color. */
+ /* Setup a temporary DTLB for source. */
- movi a8, TLBTEMP_BASE_2 # base
- add a7, a3, a5 # ppn
- add a3, a8, a4
+ addi a7, a5, PAGE_KERNEL
addi a8, a3, 1 # way1
wdtlb a7, a8
@@ -271,7 +235,7 @@ ENTRY(copy_user_page)
retw
-ENDPROC(copy_user_page)
+ENDPROC(copy_page_alias)
#endif
@@ -300,6 +264,30 @@ ENTRY(__flush_invalidate_dcache_page_alias)
retw
ENDPROC(__flush_invalidate_dcache_page_alias)
+
+/*
+ * void __invalidate_dcache_page_alias (addr, phys)
+ * a2 a3
+ */
+
+ENTRY(__invalidate_dcache_page_alias)
+
+ entry sp, 16
+
+ movi a7, 0 # required for exception handler
+ addi a6, a3, (PAGE_KERNEL | _PAGE_HW_WRITE)
+ mov a4, a2
+ wdtlb a6, a2
+ dsync
+
+ ___invalidate_dcache_page a2 a3
+
+ idtlb a4
+ dsync
+
+ retw
+
+ENDPROC(__invalidate_dcache_page_alias)
#endif
ENTRY(__tlbtemp_mapping_itlb)
diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c
index 3429b483d9f8..abe4513eb0dd 100644
--- a/arch/xtensa/mm/mmu.c
+++ b/arch/xtensa/mm/mmu.c
@@ -18,32 +18,38 @@
#include <asm/io.h>
#if defined(CONFIG_HIGHMEM)
-static void * __init init_pmd(unsigned long vaddr)
+static void * __init init_pmd(unsigned long vaddr, unsigned long n_pages)
{
pgd_t *pgd = pgd_offset_k(vaddr);
pmd_t *pmd = pmd_offset(pgd, vaddr);
+ pte_t *pte;
+ unsigned long i;
- if (pmd_none(*pmd)) {
- unsigned i;
- pte_t *pte = alloc_bootmem_low_pages(PAGE_SIZE);
+ n_pages = ALIGN(n_pages, PTRS_PER_PTE);
- for (i = 0; i < 1024; i++)
- pte_clear(NULL, 0, pte + i);
+ pr_debug("%s: vaddr: 0x%08lx, n_pages: %ld\n",
+ __func__, vaddr, n_pages);
- set_pmd(pmd, __pmd(((unsigned long)pte) & PAGE_MASK));
- BUG_ON(pte != pte_offset_kernel(pmd, 0));
- pr_debug("%s: vaddr: 0x%08lx, pmd: 0x%p, pte: 0x%p\n",
- __func__, vaddr, pmd, pte);
- return pte;
- } else {
- return pte_offset_kernel(pmd, 0);
+ pte = alloc_bootmem_low_pages(n_pages * sizeof(pte_t));
+
+ for (i = 0; i < n_pages; ++i)
+ pte_clear(NULL, 0, pte + i);
+
+ for (i = 0; i < n_pages; i += PTRS_PER_PTE, ++pmd) {
+ pte_t *cur_pte = pte + i;
+
+ BUG_ON(!pmd_none(*pmd));
+ set_pmd(pmd, __pmd(((unsigned long)cur_pte) & PAGE_MASK));
+ BUG_ON(cur_pte != pte_offset_kernel(pmd, 0));
+ pr_debug("%s: pmd: 0x%p, pte: 0x%p\n",
+ __func__, pmd, cur_pte);
}
+ return pte;
}
static void __init fixedrange_init(void)
{
- BUILD_BUG_ON(FIXADDR_SIZE > PMD_SIZE);
- init_pmd(__fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK);
+ init_pmd(__fix_to_virt(0), __end_of_fixed_addresses);
}
#endif
@@ -52,7 +58,7 @@ void __init paging_init(void)
memset(swapper_pg_dir, 0, PAGE_SIZE);
#ifdef CONFIG_HIGHMEM
fixedrange_init();
- pkmap_page_table = init_pmd(PKMAP_BASE);
+ pkmap_page_table = init_pmd(PKMAP_BASE, LAST_PKMAP);
kmap_init();
#endif
}
diff --git a/block/bio-integrity.c b/block/bio-integrity.c
index bc423f7b02da..f14b4abbebd8 100644
--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -520,7 +520,7 @@ void bio_integrity_endio(struct bio *bio, int error)
*/
if (error) {
bio->bi_end_io = bip->bip_end_io;
- bio_endio(bio, error);
+ bio_endio_nodec(bio, error);
return;
}
diff --git a/block/blk-core.c b/block/blk-core.c
index c359d72e9d76..bf930f481d43 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1252,7 +1252,6 @@ void blk_rq_set_block_pc(struct request *rq)
rq->__sector = (sector_t) -1;
rq->bio = rq->biotail = NULL;
memset(rq->__cmd, 0, sizeof(rq->__cmd));
- rq->cmd = rq->__cmd;
}
EXPORT_SYMBOL(blk_rq_set_block_pc);
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 5189cb1e478a..4aac82615a46 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -112,18 +112,22 @@ static void blk_mq_usage_counter_release(struct percpu_ref *ref)
*/
void blk_mq_freeze_queue(struct request_queue *q)
{
+ bool freeze;
+
spin_lock_irq(q->queue_lock);
- q->mq_freeze_depth++;
+ freeze = !q->mq_freeze_depth++;
spin_unlock_irq(q->queue_lock);
- percpu_ref_kill(&q->mq_usage_counter);
- blk_mq_run_queues(q, false);
+ if (freeze) {
+ percpu_ref_kill(&q->mq_usage_counter);
+ blk_mq_run_queues(q, false);
+ }
wait_event(q->mq_freeze_wq, percpu_ref_is_zero(&q->mq_usage_counter));
}
static void blk_mq_unfreeze_queue(struct request_queue *q)
{
- bool wake = false;
+ bool wake;
spin_lock_irq(q->queue_lock);
wake = !--q->mq_freeze_depth;
@@ -172,6 +176,8 @@ static void blk_mq_rq_ctx_init(struct request_queue *q, struct blk_mq_ctx *ctx,
/* tag was already set */
rq->errors = 0;
+ rq->cmd = rq->__cmd;
+
rq->extra_len = 0;
rq->sense_len = 0;
rq->resid_len = 0;
@@ -1068,13 +1074,17 @@ static void blk_mq_bio_to_request(struct request *rq, struct bio *bio)
blk_account_io_start(rq, 1);
}
+static inline bool hctx_allow_merges(struct blk_mq_hw_ctx *hctx)
+{
+ return (hctx->flags & BLK_MQ_F_SHOULD_MERGE) &&
+ !blk_queue_nomerges(hctx->queue);
+}
+
static inline bool blk_mq_merge_queue_io(struct blk_mq_hw_ctx *hctx,
struct blk_mq_ctx *ctx,
struct request *rq, struct bio *bio)
{
- struct request_queue *q = hctx->queue;
-
- if (!(hctx->flags & BLK_MQ_F_SHOULD_MERGE)) {
+ if (!hctx_allow_merges(hctx)) {
blk_mq_bio_to_request(rq, bio);
spin_lock(&ctx->lock);
insert_rq:
@@ -1082,6 +1092,8 @@ insert_rq:
spin_unlock(&ctx->lock);
return false;
} else {
+ struct request_queue *q = hctx->queue;
+
spin_lock(&ctx->lock);
if (!blk_mq_attempt_merge(q, ctx, bio)) {
blk_mq_bio_to_request(rq, bio);
@@ -1574,7 +1586,7 @@ static int blk_mq_init_hw_queues(struct request_queue *q,
hctx->tags = set->tags[i];
/*
- * Allocate space for all possible cpus to avoid allocation in
+ * Allocate space for all possible cpus to avoid allocation at
* runtime
*/
hctx->ctxs = kmalloc_node(nr_cpu_ids * sizeof(void *),
@@ -1662,8 +1674,8 @@ static void blk_mq_map_swqueue(struct request_queue *q)
queue_for_each_hw_ctx(q, hctx, i) {
/*
- * If not software queues are mapped to this hardware queue,
- * disable it and free the request entries
+ * If no software queues are mapped to this hardware queue,
+ * disable it and free the request entries.
*/
if (!hctx->nr_ctx) {
struct blk_mq_tag_set *set = q->tag_set;
@@ -1713,14 +1725,10 @@ static void blk_mq_del_queue_tag_set(struct request_queue *q)
{
struct blk_mq_tag_set *set = q->tag_set;
- blk_mq_freeze_queue(q);
-
mutex_lock(&set->tag_list_lock);
list_del_init(&q->tag_set_list);
blk_mq_update_tag_set_depth(set);
mutex_unlock(&set->tag_list_lock);
-
- blk_mq_unfreeze_queue(q);
}
static void blk_mq_add_queue_tag_set(struct blk_mq_tag_set *set,
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index cadc37841744..3f31cf9508e6 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1272,15 +1272,22 @@ __cfq_group_service_tree_add(struct cfq_rb_root *st, struct cfq_group *cfqg)
rb_insert_color(&cfqg->rb_node, &st->rb);
}
+/*
+ * This has to be called only on activation of cfqg
+ */
static void
cfq_update_group_weight(struct cfq_group *cfqg)
{
- BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
-
if (cfqg->new_weight) {
cfqg->weight = cfqg->new_weight;
cfqg->new_weight = 0;
}
+}
+
+static void
+cfq_update_group_leaf_weight(struct cfq_group *cfqg)
+{
+ BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
if (cfqg->new_leaf_weight) {
cfqg->leaf_weight = cfqg->new_leaf_weight;
@@ -1299,7 +1306,12 @@ cfq_group_service_tree_add(struct cfq_rb_root *st, struct cfq_group *cfqg)
/* add to the service tree */
BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
- cfq_update_group_weight(cfqg);
+ /*
+ * Update leaf_weight. We cannot update weight at this point
+ * because cfqg might already have been activated and is
+ * contributing its current weight to the parent's child_weight.
+ */
+ cfq_update_group_leaf_weight(cfqg);
__cfq_group_service_tree_add(st, cfqg);
/*
@@ -1323,6 +1335,7 @@ cfq_group_service_tree_add(struct cfq_rb_root *st, struct cfq_group *cfqg)
*/
while ((parent = cfqg_parent(pos))) {
if (propagate) {
+ cfq_update_group_weight(pos);
propagate = !parent->nr_active++;
parent->children_weight += pos->weight;
}
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 51bf5155ee75..9b8eaeca6a79 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -279,7 +279,6 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
r = blk_rq_unmap_user(bio);
if (!ret)
ret = r;
- blk_put_request(rq);
return ret;
}
@@ -297,8 +296,6 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
if (hdr->interface_id != 'S')
return -EINVAL;
- if (hdr->cmd_len > BLK_MAX_CDB)
- return -EINVAL;
if (hdr->dxfer_len > (queue_max_hw_sectors(q) << 9))
return -EIO;
@@ -317,16 +314,23 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
if (hdr->flags & SG_FLAG_Q_AT_HEAD)
at_head = 1;
+ ret = -ENOMEM;
rq = blk_get_request(q, writing ? WRITE : READ, GFP_KERNEL);
if (!rq)
- return -ENOMEM;
+ goto out;
blk_rq_set_block_pc(rq);
- if (blk_fill_sghdr_rq(q, rq, hdr, mode)) {
- blk_put_request(rq);
- return -EFAULT;
+ if (hdr->cmd_len > BLK_MAX_CDB) {
+ rq->cmd = kzalloc(hdr->cmd_len, GFP_KERNEL);
+ if (!rq->cmd)
+ goto out_put_request;
}
+ ret = -EFAULT;
+ if (blk_fill_sghdr_rq(q, rq, hdr, mode))
+ goto out_free_cdb;
+
+ ret = 0;
if (hdr->iovec_count) {
size_t iov_data_len;
struct iovec *iov = NULL;
@@ -335,7 +339,7 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
0, NULL, &iov);
if (ret < 0) {
kfree(iov);
- goto out;
+ goto out_free_cdb;
}
iov_data_len = ret;
@@ -358,7 +362,7 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
GFP_KERNEL);
if (ret)
- goto out;
+ goto out_free_cdb;
bio = rq->bio;
memset(sense, 0, sizeof(sense));
@@ -376,9 +380,14 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
hdr->duration = jiffies_to_msecs(jiffies - start_time);
- return blk_complete_sghdr_rq(rq, hdr, bio);
-out:
+ ret = blk_complete_sghdr_rq(rq, hdr, bio);
+
+out_free_cdb:
+ if (rq->cmd != rq->__cmd)
+ kfree(rq->cmd);
+out_put_request:
blk_put_request(rq);
+out:
return ret;
}
@@ -448,6 +457,11 @@ int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,
}
rq = blk_get_request(q, in_len ? WRITE : READ, __GFP_WAIT);
+ if (!rq) {
+ err = -ENOMEM;
+ goto error;
+ }
+ blk_rq_set_block_pc(rq);
cmdlen = COMMAND_SIZE(opcode);
@@ -501,7 +515,6 @@ int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,
memset(sense, 0, sizeof(sense));
rq->sense = sense;
rq->sense_len = 0;
- blk_rq_set_block_pc(rq);
blk_execute_rq(q, disk, rq, 0);
@@ -521,7 +534,8 @@ out:
error:
kfree(buffer);
- blk_put_request(rq);
+ if (rq)
+ blk_put_request(rq);
return err;
}
EXPORT_SYMBOL_GPL(sg_scsi_ioctl);
diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c
index 97eb001960b9..2f6e4fb1a1ea 100644
--- a/crypto/asymmetric_keys/public_key.c
+++ b/crypto/asymmetric_keys/public_key.c
@@ -121,6 +121,7 @@ static int public_key_verify_signature_2(const struct key *key,
struct asymmetric_key_subtype public_key_subtype = {
.owner = THIS_MODULE,
.name = "public_key",
+ .name_len = sizeof("public_key") - 1,
.describe = public_key_describe,
.destroy = public_key_destroy,
.verify_signature = public_key_verify_signature_2,
diff --git a/crypto/asymmetric_keys/verify_pefile.c b/crypto/asymmetric_keys/verify_pefile.c
index 79175e6ea0b2..2421f46184ce 100644
--- a/crypto/asymmetric_keys/verify_pefile.c
+++ b/crypto/asymmetric_keys/verify_pefile.c
@@ -128,6 +128,7 @@ static int pefile_strip_sig_wrapper(const void *pebuf,
{
struct win_certificate wrapper;
const u8 *pkcs7;
+ unsigned len;
if (ctx->sig_len < sizeof(wrapper)) {
pr_debug("Signature wrapper too short\n");
@@ -154,33 +155,49 @@ static int pefile_strip_sig_wrapper(const void *pebuf,
return -ENOTSUPP;
}
- /* Looks like actual pkcs signature length is in wrapper->length.
- * size obtained from data dir entries lists the total size of
- * certificate table which is also aligned to octawrod boundary.
- *
- * So set signature length field appropriately.
+ /* It looks like the pkcs signature length in wrapper->length and the
+ * size obtained from the data dir entries, which lists the total size
+ * of certificate table, are both aligned to an octaword boundary, so
+ * we may have to deal with some padding.
*/
ctx->sig_len = wrapper.length;
ctx->sig_offset += sizeof(wrapper);
ctx->sig_len -= sizeof(wrapper);
- if (ctx->sig_len == 0) {
+ if (ctx->sig_len < 4) {
pr_debug("Signature data missing\n");
return -EKEYREJECTED;
}
- /* What's left should a PKCS#7 cert */
+ /* What's left should be a PKCS#7 cert */
pkcs7 = pebuf + ctx->sig_offset;
- if (pkcs7[0] == (ASN1_CONS_BIT | ASN1_SEQ)) {
- if (pkcs7[1] == 0x82 &&
- pkcs7[2] == (((ctx->sig_len - 4) >> 8) & 0xff) &&
- pkcs7[3] == ((ctx->sig_len - 4) & 0xff))
- return 0;
- if (pkcs7[1] == 0x80)
- return 0;
- if (pkcs7[1] > 0x82)
- return -EMSGSIZE;
+ if (pkcs7[0] != (ASN1_CONS_BIT | ASN1_SEQ))
+ goto not_pkcs7;
+
+ switch (pkcs7[1]) {
+ case 0 ... 0x7f:
+ len = pkcs7[1] + 2;
+ goto check_len;
+ case ASN1_INDEFINITE_LENGTH:
+ return 0;
+ case 0x81:
+ len = pkcs7[2] + 3;
+ goto check_len;
+ case 0x82:
+ len = ((pkcs7[2] << 8) | pkcs7[3]) + 4;
+ goto check_len;
+ case 0x83 ... 0xff:
+ return -EMSGSIZE;
+ default:
+ goto not_pkcs7;
}
+check_len:
+ if (len <= ctx->sig_len) {
+ /* There may be padding */
+ ctx->sig_len = len;
+ return 0;
+ }
+not_pkcs7:
pr_debug("Signature data not PKCS#7\n");
return -ELIBBAD;
}
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index ce06149088c5..9dfec48dd4e5 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -196,6 +196,17 @@ static struct lpss_device_desc byt_i2c_dev_desc = {
.setup = lpss_i2c_setup,
};
+static struct lpss_shared_clock bsw_pwm_clock = {
+ .name = "pwm_clk",
+ .rate = 19200000,
+};
+
+static struct lpss_device_desc bsw_pwm_dev_desc = {
+ .clk_required = true,
+ .save_ctx = true,
+ .shared_clock = &bsw_pwm_clock,
+};
+
#else
#define LPSS_ADDR(desc) (0UL)
@@ -225,6 +236,12 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = {
{ "INT33B2", },
{ "INT33FC", },
+ /* Braswell LPSS devices */
+ { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
+ { "8086228A", LPSS_ADDR(byt_uart_dev_desc) },
+ { "8086228E", LPSS_ADDR(byt_spi_dev_desc) },
+ { "808622C1", LPSS_ADDR(byt_i2c_dev_desc) },
+
{ "INT3430", LPSS_ADDR(lpt_dev_desc) },
{ "INT3431", LPSS_ADDR(lpt_dev_desc) },
{ "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c
index 68f725839eb6..1b13b921dda9 100644
--- a/drivers/acpi/acpica/nsprepkg.c
+++ b/drivers/acpi/acpica/nsprepkg.c
@@ -316,6 +316,45 @@ acpi_ns_check_package(struct acpi_evaluate_info *info,
acpi_ns_check_package_list(info, package, elements, count);
break;
+ case ACPI_PTYPE2_UUID_PAIR:
+
+ /* The package must contain pairs of (UUID + type) */
+
+ if (count & 1) {
+ expected_count = count + 1;
+ goto package_too_small;
+ }
+
+ while (count > 0) {
+ status = acpi_ns_check_object_type(info, elements,
+ package->ret_info.
+ object_type1, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Validate length of the UUID buffer */
+
+ if ((*elements)->buffer.length != 16) {
+ ACPI_WARN_PREDEFINED((AE_INFO,
+ info->full_pathname,
+ info->node_flags,
+ "Invalid length for UUID Buffer"));
+ return (AE_AML_OPERAND_VALUE);
+ }
+
+ status = acpi_ns_check_object_type(info, elements + 1,
+ package->ret_info.
+ object_type2, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ elements += 2;
+ count -= 2;
+ }
+ break;
+
default:
/* Should not get here if predefined info table is correct */
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index a66ab658abbc..cb6066c809ea 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -197,6 +197,8 @@ static bool advance_transaction(struct acpi_ec *ec)
t->rdata[t->ri++] = acpi_ec_read_data(ec);
if (t->rlen == t->ri) {
t->flags |= ACPI_EC_COMMAND_COMPLETE;
+ if (t->command == ACPI_EC_COMMAND_QUERY)
+ pr_debug("hardware QR_EC completion\n");
wakeup = true;
}
} else
@@ -208,7 +210,20 @@ static bool advance_transaction(struct acpi_ec *ec)
}
return wakeup;
} else {
- if ((status & ACPI_EC_FLAG_IBF) == 0) {
+ /*
+ * There is firmware refusing to respond QR_EC when SCI_EVT
+ * is not set, for which case, we complete the QR_EC
+ * without issuing it to the firmware.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=86211
+ */
+ if (!(status & ACPI_EC_FLAG_SCI) &&
+ (t->command == ACPI_EC_COMMAND_QUERY)) {
+ t->flags |= ACPI_EC_COMMAND_POLL;
+ t->rdata[t->ri++] = 0x00;
+ t->flags |= ACPI_EC_COMMAND_COMPLETE;
+ pr_debug("software QR_EC completion\n");
+ wakeup = true;
+ } else if ((status & ACPI_EC_FLAG_IBF) == 0) {
acpi_ec_write_cmd(ec, t->command);
t->flags |= ACPI_EC_COMMAND_POLL;
} else
@@ -288,11 +303,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
/* following two actions should be kept atomic */
ec->curr = t;
start_transaction(ec);
- if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
- clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
spin_unlock_irqrestore(&ec->lock, tmp);
ret = ec_poll(ec);
spin_lock_irqsave(&ec->lock, tmp);
+ if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
ec->curr = NULL;
spin_unlock_irqrestore(&ec->lock, tmp);
return ret;
@@ -1015,6 +1030,10 @@ static struct dmi_system_id ec_dmi_table[] __initdata = {
DMI_MATCH(DMI_SYS_VENDOR, "Quanta"),
DMI_MATCH(DMI_PRODUCT_NAME, "TW9/SW9"),}, NULL},
{
+ ec_flag_msi, "Clevo W350etq", {
+ DMI_MATCH(DMI_SYS_VENDOR, "CLEVO CO."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "W35_37ET"),}, NULL},
+ {
ec_validate_ecdt, "ASUS hardware", {
DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
{
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index c96887d5289e..6e6b80eb0bba 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -484,6 +484,10 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
/* Keep IOAPIC pin configuration when suspending */
if (dev->dev.power.is_prepared)
return;
+#ifdef CONFIG_PM_RUNTIME
+ if (dev->dev.power.runtime_status == RPM_SUSPENDING)
+ return;
+#endif
entry = acpi_pci_irq_lookup(dev, pin);
if (!entry)
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 3dca36d4ad26..17f9ec501972 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1071,9 +1071,9 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
- cpuidle_pause_and_lock();
/* Protect against cpu-hotplug */
get_online_cpus();
+ cpuidle_pause_and_lock();
/* Disable all cpuidle devices */
for_each_online_cpu(cpu) {
@@ -1100,8 +1100,8 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
cpuidle_enable_device(dev);
}
}
- put_online_cpus();
cpuidle_resume_and_unlock();
+ put_online_cpus();
}
return 0;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 0a817ad24f16..3bf7764659a4 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -667,8 +667,14 @@ static ssize_t
acpi_device_sun_show(struct device *dev, struct device_attribute *attr,
char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
+ acpi_status status;
+ unsigned long long sun;
+
+ status = acpi_evaluate_integer(acpi_dev->handle, "_SUN", NULL, &sun);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
- return sprintf(buf, "%lu\n", acpi_dev->pnp.sun);
+ return sprintf(buf, "%llu\n", sun);
}
static DEVICE_ATTR(sun, 0444, acpi_device_sun_show, NULL);
@@ -690,7 +696,6 @@ static int acpi_device_setup_files(struct acpi_device *dev)
{
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
acpi_status status;
- unsigned long long sun;
int result = 0;
/*
@@ -731,14 +736,10 @@ static int acpi_device_setup_files(struct acpi_device *dev)
if (dev->pnp.unique_id)
result = device_create_file(&dev->dev, &dev_attr_uid);
- status = acpi_evaluate_integer(dev->handle, "_SUN", NULL, &sun);
- if (ACPI_SUCCESS(status)) {
- dev->pnp.sun = (unsigned long)sun;
+ if (acpi_has_method(dev->handle, "_SUN")) {
result = device_create_file(&dev->dev, &dev_attr_sun);
if (result)
goto end;
- } else {
- dev->pnp.sun = (unsigned long)-1;
}
if (acpi_has_method(dev->handle, "_STA")) {
@@ -922,12 +923,17 @@ static void acpi_device_notify(acpi_handle handle, u32 event, void *data)
device->driver->ops.notify(device, event);
}
-static acpi_status acpi_device_notify_fixed(void *data)
+static void acpi_device_notify_fixed(void *data)
{
struct acpi_device *device = data;
/* Fixed hardware devices have no handles */
acpi_device_notify(NULL, ACPI_FIXED_HARDWARE_EVENT, device);
+}
+
+static acpi_status acpi_device_fixed_event(void *data)
+{
+ acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_device_notify_fixed, data);
return AE_OK;
}
@@ -938,12 +944,12 @@ static int acpi_device_install_notify_handler(struct acpi_device *device)
if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
- acpi_device_notify_fixed,
+ acpi_device_fixed_event,
device);
else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
- acpi_device_notify_fixed,
+ acpi_device_fixed_event,
device);
else
status = acpi_install_notify_handler(device->handle,
@@ -960,10 +966,10 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device)
{
if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
- acpi_device_notify_fixed);
+ acpi_device_fixed_event);
else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
- acpi_device_notify_fixed);
+ acpi_device_fixed_event);
else
acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
acpi_device_notify);
@@ -975,7 +981,7 @@ static int acpi_device_probe(struct device *dev)
struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver);
int ret;
- if (acpi_dev->handler)
+ if (acpi_dev->handler && !acpi_is_pnp_device(acpi_dev))
return -EINVAL;
if (!acpi_drv->ops.add)
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 826884392e6b..fcbda105616e 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -82,9 +82,9 @@ module_param(allow_duplicates, bool, 0644);
* For Windows 8 systems: used to decide if video module
* should skip registering backlight interface of its own.
*/
-static int use_native_backlight_param = 1;
+static int use_native_backlight_param = -1;
module_param_named(use_native_backlight, use_native_backlight_param, int, 0444);
-static bool use_native_backlight_dmi = false;
+static bool use_native_backlight_dmi = true;
static int register_count;
static struct mutex video_list_lock;
@@ -417,6 +417,12 @@ static int __init video_set_use_native_backlight(const struct dmi_system_id *d)
return 0;
}
+static int __init video_disable_native_backlight(const struct dmi_system_id *d)
+{
+ use_native_backlight_dmi = false;
+ return 0;
+}
+
static struct dmi_system_id video_dmi_table[] __initdata = {
/*
* Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -720,6 +726,41 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 8780w"),
},
},
+
+ /*
+ * These models have a working acpi_video backlight control, and using
+ * native backlight causes a regression where backlight does not work
+ * when userspace is not handling brightness key events. Disable
+ * native_backlight on these to fix this:
+ * https://bugzilla.kernel.org/show_bug.cgi?id=81691
+ */
+ {
+ .callback = video_disable_native_backlight,
+ .ident = "ThinkPad T420",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T420"),
+ },
+ },
+ {
+ .callback = video_disable_native_backlight,
+ .ident = "ThinkPad T520",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T520"),
+ },
+ },
+
+ /* The native backlight controls do not work on some older machines */
+ {
+ /* https://bugs.freedesktop.org/show_bug.cgi?id=81515 */
+ .callback = video_disable_native_backlight,
+ .ident = "HP ENVY 15 Notebook",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"),
+ },
+ },
{}
};
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a29f8012fb08..a0cc0edafc78 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -305,6 +305,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x9c85), board_ahci }, /* Wildcat Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x8c82), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c84), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c86), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -442,6 +450,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9182 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9182),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
@@ -1329,6 +1339,18 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;
+ /*
+ * The JMicron chip 361/363 contains one SATA controller and one
+ * PATA controller,for powering on these both controllers, we must
+ * follow the sequence one by one, otherwise one of them can not be
+ * powered on successfully, so here we disable the async suspend
+ * method for these chips.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
+ (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
+ pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
+ device_disable_async_suspend(&pdev->dev);
+
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
index f1fef74e503c..032904402c95 100644
--- a/drivers/ata/ahci_tegra.c
+++ b/drivers/ata/ahci_tegra.c
@@ -18,14 +18,17 @@
*/
#include <linux/ahci_platform.h>
-#include <linux/reset.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+
+#include <soc/tegra/fuse.h>
#include <soc/tegra/pmc.h>
+
#include "ahci.h"
#define SATA_CONFIGURATION_0 0x180
@@ -180,9 +183,12 @@ static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
/* Pad calibration */
- /* FIXME Always use calibration 0. Change this to read the calibration
- * fuse once the fuse driver has landed. */
- val = 0;
+ ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
+ if (ret) {
+ dev_err(&tegra->pdev->dev,
+ "failed to read calibration fuse: %d\n", ret);
+ return ret;
+ }
calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index c6962300b93c..f03aab187f4d 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -78,6 +78,9 @@
#define CFG_MEM_RAM_SHUTDOWN 0x00000070
#define BLOCK_MEM_RDY 0x00000074
+/* Max retry for link down */
+#define MAX_LINK_DOWN_RETRY 3
+
struct xgene_ahci_context {
struct ahci_host_priv *hpriv;
struct device *dev;
@@ -145,6 +148,14 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
return rc;
}
+static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx)
+{
+ void __iomem *diagcsr = ctx->csr_diag;
+
+ return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 &&
+ readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF);
+}
+
/**
* xgene_ahci_read_id - Read ID data from the specified device
* @dev: device
@@ -229,8 +240,11 @@ static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel)
* and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will
* report disparity error and etc. In addition, during COMRESET, there can
* be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and
- * SERR_10B_8B_ERR, the PHY receiver line must be reseted. The following
- * algorithm is followed to proper configure the hardware PHY during COMRESET:
+ * SERR_10B_8B_ERR, the PHY receiver line must be reseted. Also during long
+ * reboot cycle regression, sometimes the PHY reports link down even if the
+ * device is present because of speed negotiation failure. so need to retry
+ * the COMRESET to get the link up. The following algorithm is followed to
+ * proper configure the hardware PHY during COMRESET:
*
* Alg Part 1:
* 1. Start the PHY at Gen3 speed (default setting)
@@ -246,9 +260,15 @@ static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel)
* Alg Part 2:
* 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error
* reported in the register PORT_SCR_ERR, then reset the PHY receiver line
- * 2. Go to Alg Part 3
+ * 2. Go to Alg Part 4
*
* Alg Part 3:
+ * 1. Check the PORT_SCR_STAT to see whether device presence detected but PHY
+ * communication establishment failed and maximum link down attempts are
+ * less than Max attempts 3 then goto Alg Part 1.
+ * 2. Go to Alg Part 4.
+ *
+ * Alg Part 4:
* 1. Clear any pending from register PORT_SCR_ERR.
*
* NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition
@@ -267,19 +287,27 @@ static int xgene_ahci_do_hardreset(struct ata_link *link,
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_taskfile tf;
+ int link_down_retry = 0;
int rc;
- u32 val;
-
- /* clear D2H reception area to properly wait for D2H FIS */
- ata_tf_init(link->device, &tf);
- tf.command = ATA_BUSY;
- ata_tf_to_fis(&tf, 0, 0, d2h_fis);
- rc = sata_link_hardreset(link, timing, deadline, online,
+ u32 val, sstatus;
+
+ do {
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = ATA_BUSY;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+ rc = sata_link_hardreset(link, timing, deadline, online,
ahci_check_ready);
+ if (*online) {
+ val = readl(port_mmio + PORT_SCR_ERR);
+ if (val & (SERR_DISPARITY | SERR_10B_8B_ERR))
+ dev_warn(ctx->dev, "link has error\n");
+ break;
+ }
- val = readl(port_mmio + PORT_SCR_ERR);
- if (val & (SERR_DISPARITY | SERR_10B_8B_ERR))
- dev_warn(ctx->dev, "link has error\n");
+ sata_scr_read(link, SCR_STATUS, &sstatus);
+ } while (link_down_retry++ < MAX_LINK_DOWN_RETRY &&
+ (sstatus & 0xff) == 0x1);
/* clear all errors if any pending */
val = readl(port_mmio + PORT_SCR_ERR);
@@ -467,6 +495,11 @@ static int xgene_ahci_probe(struct platform_device *pdev)
return -ENODEV;
}
+ if (xgene_ahci_is_memram_inited(ctx)) {
+ dev_info(dev, "skip clock and PHY initialization\n");
+ goto skip_clk_phy;
+ }
+
/* Due to errata, HW requires full toggle transition */
rc = ahci_platform_enable_clks(hpriv);
if (rc)
@@ -479,7 +512,7 @@ static int xgene_ahci_probe(struct platform_device *pdev)
/* Configure the host controller */
xgene_ahci_hw_init(hpriv);
-
+skip_clk_phy:
hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info);
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 893e30e9a9ef..ffbe625e6fd2 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -340,6 +340,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
/* SATA Controller IDE (Coleto Creek) */
{ 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c88, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c89, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c80, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c81, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
{ } /* terminate list */
};
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 4d1a5d2c4287..47e418b8c8ba 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -143,6 +143,18 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
};
const struct ata_port_info *ppi[] = { &info, NULL };
+ /*
+ * The JMicron chip 361/363 contains one SATA controller and one
+ * PATA controller,for powering on these both controllers, we must
+ * follow the sequence one by one, otherwise one of them can not be
+ * powered on successfully, so here we disable the async suspend
+ * method for these chips.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
+ (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
+ pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
+ device_disable_async_suspend(&pdev->dev);
+
return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
}
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index 7d1326985bee..bfc90b8547f2 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -146,6 +146,9 @@ struct regcache_ops {
enum regcache_type type;
int (*init)(struct regmap *map);
int (*exit)(struct regmap *map);
+#ifdef CONFIG_DEBUG_FS
+ void (*debugfs_init)(struct regmap *map);
+#endif
int (*read)(struct regmap *map, unsigned int reg, unsigned int *value);
int (*write)(struct regmap *map, unsigned int reg, unsigned int value);
int (*sync)(struct regmap *map, unsigned int min, unsigned int max);
diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c
index 6a7e4fa12854..f3e8fe0cc650 100644
--- a/drivers/base/regmap/regcache-rbtree.c
+++ b/drivers/base/regmap/regcache-rbtree.c
@@ -194,10 +194,6 @@ static void rbtree_debugfs_init(struct regmap *map)
{
debugfs_create_file("rbtree", 0400, map->debugfs, map, &rbtree_fops);
}
-#else
-static void rbtree_debugfs_init(struct regmap *map)
-{
-}
#endif
static int regcache_rbtree_init(struct regmap *map)
@@ -222,8 +218,6 @@ static int regcache_rbtree_init(struct regmap *map)
goto err;
}
- rbtree_debugfs_init(map);
-
return 0;
err:
@@ -532,6 +526,9 @@ struct regcache_ops regcache_rbtree_ops = {
.name = "rbtree",
.init = regcache_rbtree_init,
.exit = regcache_rbtree_exit,
+#ifdef CONFIG_DEBUG_FS
+ .debugfs_init = rbtree_debugfs_init,
+#endif
.read = regcache_rbtree_read,
.write = regcache_rbtree_write,
.sync = regcache_rbtree_sync,
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c
index 29b4128da0b0..5617da6dc898 100644
--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -698,7 +698,7 @@ int regcache_sync_block(struct regmap *map, void *block,
unsigned int block_base, unsigned int start,
unsigned int end)
{
- if (regmap_can_raw_write(map))
+ if (regmap_can_raw_write(map) && !map->use_single_rw)
return regcache_sync_block_raw(map, block, cache_present,
block_base, start, end);
else
diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c
index 45d812c0ea77..65ea7b256b3e 100644
--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -538,6 +538,9 @@ void regmap_debugfs_init(struct regmap *map, const char *name)
next = rb_next(&range_node->node);
}
+
+ if (map->cache_ops && map->cache_ops->debugfs_init)
+ map->cache_ops->debugfs_init(map);
}
void regmap_debugfs_exit(struct regmap *map)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 78f43fb2fe84..1cf427bc0d4a 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -109,7 +109,7 @@ bool regmap_readable(struct regmap *map, unsigned int reg)
bool regmap_volatile(struct regmap *map, unsigned int reg)
{
- if (!regmap_readable(map, reg))
+ if (!map->format.format_write && !regmap_readable(map, reg))
return false;
if (map->volatile_reg)
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index c7d138eca731..3598110d2cef 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -442,12 +442,15 @@ static int rd_nr;
int rd_size = CONFIG_BLK_DEV_RAM_SIZE;
static int max_part;
static int part_shift;
+static int part_show = 0;
module_param(rd_nr, int, S_IRUGO);
MODULE_PARM_DESC(rd_nr, "Maximum number of brd devices");
module_param(rd_size, int, S_IRUGO);
MODULE_PARM_DESC(rd_size, "Size of each RAM disk in kbytes.");
module_param(max_part, int, S_IRUGO);
MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk");
+module_param(part_show, int, S_IRUGO);
+MODULE_PARM_DESC(part_show, "Control RAM disk visibility in /proc/partitions");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
MODULE_ALIAS("rd");
@@ -501,7 +504,8 @@ static struct brd_device *brd_alloc(int i)
disk->fops = &brd_fops;
disk->private_data = brd;
disk->queue = brd->brd_queue;
- disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
+ if (!part_show)
+ disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
sprintf(disk->disk_name, "ram%d", i);
set_capacity(disk, rd_size * 2);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ab3ea62e5dfc..c4328d9d9981 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1203,7 +1203,6 @@ static struct platform_driver ace_platform_driver = {
.probe = ace_probe,
.remove = ace_remove,
.driver = {
- .owner = THIS_MODULE,
.name = "xsysace",
.of_match_table = ace_of_match,
},
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index dfa4024c448a..d00831c3d731 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -378,7 +378,6 @@ static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
/* Should NEVER happen. Return bio error if it does. */
if (unlikely(ret)) {
pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
- atomic64_inc(&zram->stats.failed_reads);
return ret;
}
@@ -547,8 +546,6 @@ out:
zcomp_strm_release(zram->comp, zstrm);
if (is_partial_io(bvec))
kfree(uncmem);
- if (ret)
- atomic64_inc(&zram->stats.failed_writes);
return ret;
}
@@ -566,6 +563,13 @@ static int zram_bvec_rw(struct zram *zram, struct bio_vec *bvec, u32 index,
ret = zram_bvec_write(zram, bvec, index, offset);
}
+ if (unlikely(ret)) {
+ if (rw == READ)
+ atomic64_inc(&zram->stats.failed_reads);
+ else
+ atomic64_inc(&zram->stats.failed_writes);
+ }
+
return ret;
}
diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h
index 5b0afde729cd..e0f725c87cc6 100644
--- a/drivers/block/zram/zram_drv.h
+++ b/drivers/block/zram/zram_drv.h
@@ -84,7 +84,7 @@ struct zram_stats {
atomic64_t compr_data_size; /* compressed size of pages stored */
atomic64_t num_reads; /* failed + successful */
atomic64_t num_writes; /* --do-- */
- atomic64_t failed_reads; /* should NEVER! happen */
+ atomic64_t failed_reads; /* can happen when memory is too low */
atomic64_t failed_writes; /* can happen when memory is too low */
atomic64_t invalid_io; /* non-page-aligned I/O requests */
atomic64_t notify_free; /* no. of swap slot free notifications */
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 3266f8ff9311..a60f26400705 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -586,6 +586,30 @@ static int arm_ccn_pmu_type_eq(u32 a, u32 b)
return 0;
}
+static void arm_ccn_pmu_event_destroy(struct perf_event *event)
+{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
+ struct hw_perf_event *hw = &event->hw;
+
+ if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER) {
+ clear_bit(CCN_IDX_PMU_CYCLE_COUNTER, ccn->dt.pmu_counters_mask);
+ } else {
+ struct arm_ccn_component *source =
+ ccn->dt.pmu_counters[hw->idx].source;
+
+ if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP &&
+ CCN_CONFIG_EVENT(event->attr.config) ==
+ CCN_EVENT_WATCHPOINT)
+ clear_bit(hw->config_base, source->xp.dt_cmp_mask);
+ else
+ clear_bit(hw->config_base, source->pmu_events_mask);
+ clear_bit(hw->idx, ccn->dt.pmu_counters_mask);
+ }
+
+ ccn->dt.pmu_counters[hw->idx].source = NULL;
+ ccn->dt.pmu_counters[hw->idx].event = NULL;
+}
+
static int arm_ccn_pmu_event_init(struct perf_event *event)
{
struct arm_ccn *ccn;
@@ -599,6 +623,7 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
return -ENOENT;
ccn = pmu_to_arm_ccn(event->pmu);
+ event->destroy = arm_ccn_pmu_event_destroy;
if (hw->sample_period) {
dev_warn(ccn->dev, "Sampling not supported!\n");
@@ -662,7 +687,7 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
}
if (e->num_vcs && vc >= e->num_vcs) {
dev_warn(ccn->dev, "Invalid vc %d for node/XP %d!\n",
- port, node_xp);
+ vc, node_xp);
return -EINVAL;
}
valid = 1;
@@ -731,30 +756,6 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
return 0;
}
-static void arm_ccn_pmu_event_free(struct perf_event *event)
-{
- struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
- struct hw_perf_event *hw = &event->hw;
-
- if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER) {
- clear_bit(CCN_IDX_PMU_CYCLE_COUNTER, ccn->dt.pmu_counters_mask);
- } else {
- struct arm_ccn_component *source =
- ccn->dt.pmu_counters[hw->idx].source;
-
- if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP &&
- CCN_CONFIG_EVENT(event->attr.config) ==
- CCN_EVENT_WATCHPOINT)
- clear_bit(hw->config_base, source->xp.dt_cmp_mask);
- else
- clear_bit(hw->config_base, source->pmu_events_mask);
- clear_bit(hw->idx, ccn->dt.pmu_counters_mask);
- }
-
- ccn->dt.pmu_counters[hw->idx].source = NULL;
- ccn->dt.pmu_counters[hw->idx].event = NULL;
-}
-
static u64 arm_ccn_pmu_read_counter(struct arm_ccn *ccn, int idx)
{
u64 res;
@@ -1027,8 +1028,6 @@ static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
{
arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
-
- arm_ccn_pmu_event_free(event);
}
static void arm_ccn_pmu_event_read(struct perf_event *event)
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index c5eac949760d..0668b389c516 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -660,6 +660,7 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
ICPU(0x3f, core_params),
ICPU(0x45, core_params),
ICPU(0x46, core_params),
+ ICPU(0x4c, byt_params),
ICPU(0x4f, core_params),
ICPU(0x56, core_params),
{}
@@ -688,7 +689,7 @@ static int intel_pstate_init_cpu(unsigned int cpunum)
add_timer_on(&cpu->timer, cpunum);
- pr_info("Intel pstate controlling: cpu %d\n", cpunum);
+ pr_debug("Intel pstate controlling: cpu %d\n", cpunum);
return 0;
}
@@ -707,10 +708,6 @@ static unsigned int intel_pstate_get(unsigned int cpu_num)
static int intel_pstate_set_policy(struct cpufreq_policy *policy)
{
- struct cpudata *cpu;
-
- cpu = all_cpu_data[policy->cpu];
-
if (!policy->cpuinfo.max_freq)
return -ENODEV;
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 9a68225a757e..3f9791f07b8e 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -501,7 +501,7 @@ static int check_mem_type(void __iomem *dmc_reg)
return val >> 8;
}
-static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
+static int s5pv210_cpu_init(struct cpufreq_policy *policy)
{
unsigned long mem_type;
int ret;
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
index 344d79fa3407..ef94c3b81f18 100644
--- a/drivers/cpuidle/cpuidle-big_little.c
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -138,25 +138,18 @@ static int bl_enter_powerdown(struct cpuidle_device *dev,
return idx;
}
-static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int cpu_id)
+static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int part_id)
{
- struct cpuinfo_arm *cpu_info;
struct cpumask *cpumask;
- unsigned long cpuid;
int cpu;
cpumask = kzalloc(cpumask_size(), GFP_KERNEL);
if (!cpumask)
return -ENOMEM;
- for_each_possible_cpu(cpu) {
- cpu_info = &per_cpu(cpu_data, cpu);
- cpuid = is_smp() ? cpu_info->cpuid : read_cpuid_id();
-
- /* read cpu id part number */
- if ((cpuid & 0xFFF0) == cpu_id)
+ for_each_possible_cpu(cpu)
+ if (smp_cpuid_part(cpu) == part_id)
cpumask_set_cpu(cpu, cpumask);
- }
drv->cpumask = cpumask;
diff --git a/drivers/dma-buf/fence.c b/drivers/dma-buf/fence.c
index 4222cb2aa96a..7bb9d65d9a2c 100644
--- a/drivers/dma-buf/fence.c
+++ b/drivers/dma-buf/fence.c
@@ -29,7 +29,7 @@
EXPORT_TRACEPOINT_SYMBOL(fence_annotate_wait_on);
EXPORT_TRACEPOINT_SYMBOL(fence_emit);
-/**
+/*
* fence context counter: each execution context should have its own
* fence context, this allows checking if fences belong to the same
* context or not. One device can have multiple separate contexts,
diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
index f0a43646a2f3..5abe943e3404 100644
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -481,7 +481,7 @@ EXPORT_SYMBOL_GPL(efivar_entry_remove);
*/
static void efivar_entry_list_del_unlock(struct efivar_entry *entry)
{
- WARN_ON(!spin_is_locked(&__efivars->lock));
+ lockdep_assert_held(&__efivars->lock);
list_del(&entry->list);
spin_unlock_irq(&__efivars->lock);
@@ -507,7 +507,7 @@ int __efivar_entry_delete(struct efivar_entry *entry)
const struct efivar_operations *ops = __efivars->ops;
efi_status_t status;
- WARN_ON(!spin_is_locked(&__efivars->lock));
+ lockdep_assert_held(&__efivars->lock);
status = ops->set_variable(entry->var.VariableName,
&entry->var.VendorGuid,
@@ -667,7 +667,7 @@ struct efivar_entry *efivar_entry_find(efi_char16_t *name, efi_guid_t guid,
int strsize1, strsize2;
bool found = false;
- WARN_ON(!spin_is_locked(&__efivars->lock));
+ lockdep_assert_held(&__efivars->lock);
list_for_each_entry_safe(entry, n, head, list) {
strsize1 = ucs2_strsize(name, 1024);
@@ -739,7 +739,7 @@ int __efivar_entry_get(struct efivar_entry *entry, u32 *attributes,
const struct efivar_operations *ops = __efivars->ops;
efi_status_t status;
- WARN_ON(!spin_is_locked(&__efivars->lock));
+ lockdep_assert_held(&__efivars->lock);
status = ops->get_variable(entry->var.VariableName,
&entry->var.VendorGuid,
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 41b2f40578d5..954b9f6b0ef8 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -90,7 +90,7 @@ struct gpio_desc *__must_check __devm_gpiod_get_index(struct device *dev,
struct gpio_desc **dr;
struct gpio_desc *desc;
- dr = devres_alloc(devm_gpiod_release, sizeof(struct gpiod_desc *),
+ dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
GFP_KERNEL);
if (!dr)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c
index 6557147d9331..7e4c43c18960 100644
--- a/drivers/gpio/gpio-bt8xx.c
+++ b/drivers/gpio/gpio-bt8xx.c
@@ -241,9 +241,6 @@ static void bt8xxgpio_remove(struct pci_dev *pdev)
bgwrite(~0x0, BT848_INT_STAT);
bgwrite(0x0, BT848_GPIO_OUT_EN);
- iounmap(bg->mmio);
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
pci_disable_device(pdev);
}
diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c
index ff9eb911b5e4..fa945ec9ccff 100644
--- a/drivers/gpio/gpio-lynxpoint.c
+++ b/drivers/gpio/gpio-lynxpoint.c
@@ -407,9 +407,27 @@ static int lp_gpio_runtime_resume(struct device *dev)
return 0;
}
+static int lp_gpio_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct lp_gpio *lg = platform_get_drvdata(pdev);
+ unsigned long reg;
+ int i;
+
+ /* on some hardware suspend clears input sensing, re-enable it here */
+ for (i = 0; i < lg->chip.ngpio; i++) {
+ if (gpiochip_is_requested(&lg->chip, i) != NULL) {
+ reg = lp_gpio_reg(&lg->chip, i, LP_CONFIG2);
+ outl(inl(reg) & ~GPINDIS_BIT, reg);
+ }
+ }
+ return 0;
+}
+
static const struct dev_pm_ops lp_gpio_pm_ops = {
.runtime_suspend = lp_gpio_runtime_suspend,
.runtime_resume = lp_gpio_runtime_resume,
+ .resume = lp_gpio_resume,
};
static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = {
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index c3145f91fda3..31ad5df5dbc9 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -95,6 +95,9 @@ struct zynq_gpio {
struct clk *clk;
};
+static struct irq_chip zynq_gpio_level_irqchip;
+static struct irq_chip zynq_gpio_edge_irqchip;
+
/**
* zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
* for a given pin in the GPIO device
@@ -410,6 +413,15 @@ static int zynq_gpio_set_irq_type(struct irq_data *irq_data, unsigned int type)
gpio->base_addr + ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
writel_relaxed(int_any,
gpio->base_addr + ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+
+ if (type & IRQ_TYPE_LEVEL_MASK) {
+ __irq_set_chip_handler_name_locked(irq_data->irq,
+ &zynq_gpio_level_irqchip, handle_fasteoi_irq, NULL);
+ } else {
+ __irq_set_chip_handler_name_locked(irq_data->irq,
+ &zynq_gpio_edge_irqchip, handle_level_irq, NULL);
+ }
+
return 0;
}
@@ -424,9 +436,21 @@ static int zynq_gpio_set_wake(struct irq_data *data, unsigned int on)
}
/* irq chip descriptor */
-static struct irq_chip zynq_gpio_irqchip = {
+static struct irq_chip zynq_gpio_level_irqchip = {
.name = DRIVER_NAME,
.irq_enable = zynq_gpio_irq_enable,
+ .irq_eoi = zynq_gpio_irq_ack,
+ .irq_mask = zynq_gpio_irq_mask,
+ .irq_unmask = zynq_gpio_irq_unmask,
+ .irq_set_type = zynq_gpio_set_irq_type,
+ .irq_set_wake = zynq_gpio_set_wake,
+ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
+};
+
+static struct irq_chip zynq_gpio_edge_irqchip = {
+ .name = DRIVER_NAME,
+ .irq_enable = zynq_gpio_irq_enable,
+ .irq_ack = zynq_gpio_irq_ack,
.irq_mask = zynq_gpio_irq_mask,
.irq_unmask = zynq_gpio_irq_unmask,
.irq_set_type = zynq_gpio_set_irq_type,