AgeCommit message (Collapse)AuthorLines
2012-12-13microblaze: lib: Remove helper macrosMichal Simek-16/+12
Remove these gcc types and use standard types. Signed-off-by: Michal Simek <>
2012-12-13microblaze: Add static qualifiersMichal Simek-3/+3
Adding static to internal variables and functions. Sparse warnings: arch/microblaze/kernel/prom.c:55:6: warning: symbol 'stdout' was not declared. Should it be static? arch/microblaze/kernel/prom.c:57:12: warning: symbol 'early_init_dt_scan_chosen_serial' was not declared. Should it be static? CC arch/microblaze/kernel/prom.o arch/microblaze/kernel/intc.c:102:5: warning: symbol 'xintc_map' was not declared. Should it be static? CC arch/microblaze/kernel/intc.o Signed-off-by: Michal Simek <>
2012-12-13microblaze: Wire-up new system call kcmpMichal Simek-1/+3
Wire-up kcmp syscall. Signed-off-by: Michal Simek <>
2012-12-13microblaze: Fix intc_enable_or_unmask functionMichal Simek-1/+2
Intc_enable_or_unmask() is called at the last stage of handle_level_irq(). This function enables the irq first (Write INTC.SIE) and clear ISR next (Write INTC.IAR). This would create problems that processor will get into a new interrupt as soon as SIE is written because the previous level interrupt has been captured by INTC. If the description bring some puzzles, here is the details of how interrupt is handled for MicroBlaze after Interrupt signal is detected: 1. disable INTC (INTC.CIE = 1) 2. Acknowledge INTC (INTC.IAR = 1) 3. gets into interrupt source's handler, for example, timer's handler 4. Timer is interrupt handler acknowledge Timer Interrupt Status (Timer.TCSR0[23] = 1), and return 5. Enable INTC (INTC.SIE = 1) 6. Acknowledge INTC (INTC.IAR = 1) INTC continue to capture source inputs even if INTC is disabled (INTC.IER == 1). So between the gap of step 2 and step 3, the level interrupt from source makes INTC captures a new interrupt and thus the INTC.ISR = 1 during step 3, 4, and 5. When INTC is enabled in step 5, INTC's interrupt output will go high immediately. In summary, the driver should issue step 6 before step 5. Signed-off-by: Michal Simek <>
2012-12-13microblaze: Do not initialized regs->r1 twice in ELF_PLAT_INITMichal Simek-1/+1
Fix ELF_PLAT_INIT macro which initialized r1 twice which ends in compilation warning. Warning log: fs/binfmt_elf.c: In function 'load_elf_binary': fs/binfmt_elf.c:981:2: warning: operation on 'regs->r1' may be undefined [-Wsequence-point] CC fs/dcookies.o Signed-off-by: Michal Simek <>
2012-12-13microblaze: Remove passing the second arg to schedule_tailMichal Simek-1/+0
Signed-off-by: Michal Simek <>
2012-12-13UAPI: (Scripted) Disintegrate arch/microblaze/include/asmDavid Howells-552/+649
Signed-off-by: David Howells <> Acked-by: Arnd Bergmann <> Acked-by: Thomas Gleixner <> Acked-by: Michael Kerrisk <> Acked-by: Paul E. McKenney <> Acked-by: Dave Jones <>
2012-12-13microblaze: uaccess.h: Fix timerfd syscallMichal Simek-2/+1
__pu_val must be volatile to ensure that the value is not lost. It was causing the problem with timerfd syscall where using inline asm at the end of function call doesn't save u64 bit value to the stack. In comparison both cases you can find out this fragment where you can see the first part which is saved u64 value to stack and then using it in __put_user_asm_8 macro. Origin broken implementation misses the first two swi instructions. swi r22, r1, 28 /* missing without volatile */ swi r23, r1, 32 ... addik r4, r1, 28 lwi r3, r4, 0 swi r3, r25, 0 lwi r3, r4, 4 swi r3, r25, 4 addk r3, r0, r0 NOTE: Moving __put_val initialization after declaration has not impact on this bug. It is just coding style issue. Signed-off-by: Michal Simek <>
2012-12-13microblaze: Remove BIP from childregsMichal Simek-1/+0
Not necessary to use BIP for protection. Signed-off-by: Michal Simek <>
2012-12-12Merge git:// Torvalds-34453/+82808
Pull networking changes from David Miller: 1) Allow to dump, monitor, and change the bridge multicast database using netlink. From Cong Wang. 2) RFC 5961 TCP blind data injection attack mitigation, from Eric Dumazet. 3) Networking user namespace support from Eric W. Biederman. 4) tuntap/virtio-net multiqueue support by Jason Wang. 5) Support for checksum offload of encapsulated packets (basically, tunneled traffic can still be checksummed by HW). From Joseph Gasparakis. 6) Allow BPF filter access to VLAN tags, from Eric Dumazet and Daniel Borkmann. 7) Bridge port parameters over netlink and BPDU blocking support from Stephen Hemminger. 8) Improve data access patterns during inet socket demux by rearranging socket layout, from Eric Dumazet. 9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and Jon Maloy. 10) Update TCP socket hash sizing to be more in line with current day realities. The existing heurstics were choosen a decade ago. From Eric Dumazet. 11) Fix races, queue bloat, and excessive wakeups in ATM and associated drivers, from Krzysztof Mazur and David Woodhouse. 12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions in VXLAN driver, from David Stevens. 13) Add "oops_only" mode to netconsole, from Amerigo Wang. 14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also allow DCB netlink to work on namespaces other than the initial namespace. From John Fastabend. 15) Support PTP in the Tigon3 driver, from Matt Carlson. 16) tun/vhost zero copy fixes and improvements, plus turn it on by default, from Michael S. Tsirkin. 17) Support per-association statistics in SCTP, from Michele Baldessari. And many, many, driver updates, cleanups, and improvements. Too numerous to mention individually. * git:// (1722 commits) net/mlx4_en: Add support for destination MAC in steering rules net/mlx4_en: Use generic etherdevice.h functions. net: ethtool: Add destination MAC address to flow steering API bridge: add support of adding and deleting mdb entries bridge: notify mdb changes via netlink ndisc: Unexport ndisc_{build,send}_skb(). uapi: add missing netconf.h to export list pkt_sched: avoid requeues if possible solos-pci: fix double-free of TX skb in DMA mode bnx2: Fix accidental reversions. bna: Driver Version Updated to bna: Firmware update bna: Add RX State bna: Rx Page Based Allocation bna: TX Intr Coalescing Fix bna: Tx and Rx Optimizations bna: Code Cleanup and Enhancements ath9k: check pdata variable before dereferencing it ath5k: RX timestamp is reported at end of frame ath9k_htc: RX timestamp is reported at end of frame ...
2012-12-12Merge tag 'for-linus-20121212' of ↵Linus Torvalds-136/+234
git:// Pull MN10300 changes from David Howells: "miscellaneous MN10300 arch patches. I've based it on top of Al Viro's signal tree - so these patches should be pulled after that." * tag 'for-linus-20121212' of git:// MN10300: Use asm-generic/pci_iomap.h MN10300: Get rid of unused variable from ASB2305 PCI code MN10300: ASB2305 PCI code needs linux/irq.h mn10300/mm/fault.c: Port OOM changes to do_page_fault MN10300: Handle cacheable PCI regions in pci_iomap() MN10300: fix debug polling in ttySM driver MN10300: ttySM: clean up unnecessary casting MN10300: fix SMP synchronization between txdma and serial driver MN10300: fix serial port vdma irq setup for SMP MN10300: cleanup IRQ affinity setting MN10300: ttySM: Use memory barriers correctly in circular buffer logic
2012-12-12Merge branch 'for-linus' of ↵Linus Torvalds-4221/+1375
git:// Pull big execve/kernel_thread/fork unification series from Al Viro: "All architectures are converted to new model. Quite a bit of that stuff is actually shared with architecture trees; in such cases it's literally shared branch pulled by both, not a cherry-pick. A lot of ugliness and black magic is gone (-3KLoC total in this one): - kernel_thread()/kernel_execve()/sys_execve() redesign. We don't do syscalls from kernel anymore for either kernel_thread() or kernel_execve(): kernel_thread() is essentially clone(2) with callback run before we return to userland, the callbacks either never return or do successful do_execve() before returning. kernel_execve() is a wrapper for do_execve() - it doesn't need to do transition to user mode anymore. As a result kernel_thread() and kernel_execve() are arch-independent now - they live in kernel/fork.c and fs/exec.c resp. sys_execve() is also in fs/exec.c and it's completely architecture-independent. - daemonize() is gone, along with its parts in fs/*.c - struct pt_regs * is no longer passed to do_fork/copy_process/ copy_thread/do_execve/search_binary_handler/->load_binary/do_coredump. - sys_fork()/sys_vfork()/sys_clone() unified; some architectures still need wrappers (ones with callee-saved registers not saved in pt_regs on syscall entry), but the main part of those suckers is in kernel/fork.c now." * 'for-linus' of git:// (113 commits) do_coredump(): get rid of pt_regs argument print_fatal_signal(): get rid of pt_regs argument ptrace_signal(): get rid of unused arguments get rid of ptrace_signal_deliver() arguments new helper: signal_pt_regs() unify default ptrace_signal_deliver flagday: kill pt_regs argument of do_fork() death to idle_regs() don't pass regs to copy_process() flagday: don't pass regs to copy_thread() bfin: switch to generic vfork, get rid of pointless wrappers xtensa: switch to generic clone() openrisc: switch to use of generic fork and clone unicore32: switch to generic clone(2) score: switch to generic fork/vfork/clone c6x: sanitize copy_thread(), get rid of clone(2) wrapper, switch to generic clone() take sys_fork/sys_vfork/sys_clone prototypes to linux/syscalls.h mn10300: switch to generic fork/vfork/clone h8300: switch to generic fork/vfork/clone tile: switch to generic clone() ... Conflicts: arch/microblaze/include/asm/Kbuild
2012-12-12Merge tag 'boards' of git:// Torvalds-1322/+2500
Pull ARM SoC board updates from Olof Johansson: "This branch contains a set of various board updates for ARM platforms. A few shmobile platforms that are stale have been removed, some defconfig updates for various boards selecting new features such as pinctrl subsystem support, and various updates enabling peripherals, etc." Fix up conflicts mostly as per Olof. * tag 'boards' of git:// (58 commits) ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore ARM: kirkwood: Add Plat'Home OpenBlocks A6 support ARM: Dove: update defconfig ARM: Kirkwood: update defconfig for new boards arm: orion5x: add DT related options in defconfig arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree arm: orion5x: basic Device Tree support arm: orion5x: mechanical defconfig update ARM: kirkwood: Add support for the MPL CEC4 arm: kirkwood: add support for ZyXEL NSA310 ARM: Kirkwood: new board USI Topkick ARM: kirkwood: use gpio-fan DT binding on lsxl ARM: Kirkwood: add Netspace boards to defconfig ARM: kirkwood: DT board setup for Network Space Mini v2 ARM: kirkwood: DT board setup for Network Space Lite v2 ARM: kirkwood: DT board setup for Network Space v2 and parents leds: leds-ns2: add device tree binding ARM: Kirkwood: Enable the second I2C bus ARM: mmp: select pinctrl driver ...
2012-12-12Merge tag 'soc' of git:// Torvalds-10616/+10139
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git:// (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-12-12Merge tag 'cleanup' of git:// Torvalds-4091/+4718
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git:// (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-12Merge tag 'headers' of git:// Torvalds-8518/+8659
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git:// (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-12-12Merge tag 'fixes-non-critical' of ↵Linus Torvalds-16/+168
git:// Pull ARM SoC Non-critical bug fixes from Olof Johansson: "Simple bug fixes that were not considered important enough for inclusion into 3.7, especially those that arrived late during the merge window. There's also a MAINTAINERS update for the Renesas platforms in here, marking Simon Horman as a maintainer and changing the git url to his tree." * tag 'fixes-non-critical' of git:// Update ARM/SHMOBILE section of MAINTAINERS ARM: Fix Kconfig symbols typo for LEDS ARM: pxa: add dummy SA1100 rtc clock in pxa25x ARM: pxa: fix pxa25x gpio wakeup setting ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n ARM: cns3xxx: drop unnecessary symbol selection ARM: vexpress: fix ll debug code when building multiplatform ARM: OMAP4: retrigger localtimers after re-enabling gic ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change. ARM: OMAP4: PM: add errata support ARM: davinci: fix return value check by using IS_ERR in tnetv107x_devices_init() ARM: davinci: uncompress.h: bail out if uart not initialized ARM: davinci: serial.h: fix uart number in the comment ARM: davinci: dm644x evm: move pointer dereference below NULL check ARM: vexpress: Make the debug UART detection more specific
2012-12-12Merge branch 'for-linus' of git:// Torvalds-970/+1548
Pull ARM updates from Russell King: "Here's the updates for ARM for this merge window, which cover quite a variety of areas. There's a bunch of patch series from Will tackling various bugs like the PROT_NONE handling, ASID allocation, cluster boot protocol and ASID TLB tagging updates. We move to a build-time sorted exception table rather than doing the sorting at run-time, add support for the secure computing filter, and some updates to the perf code. We also have sorted out the placement of some headers, fixed some build warnings, fixed some hotplug problems with the per-cpu TWD code." * 'for-linus' of git:// (73 commits) ARM: 7594/1: Add .smp entry for REALVIEW_EB ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets. ARM: 7595/1: syscall: rework ordering in syscall_trace_exit ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch. ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6 ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only ARM: 7587/1: implement optimized percpu variable access ARM: 7589/1: integrator: pass the lm resource to amba ARM: 7588/1: amba: create a resource parent registrator ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected ARM: gic: use a private mapping for CPU target interfaces ARM: kernel: add logical mappings look-up ARM: kernel: add cpu logical map DT init in setup_arch ARM: kernel: add device tree init map function ...
2012-12-12net/mlx4_en: Add support for destination MAC in steering rulesYan Burman-6/+15
Implement destination MAC rule extension for L3/L4 rules in flow steering. Usefull for vSwitch/macvlan configurations. Signed-off-by: Yan Burman <> Signed-off-by: Amir Vadai <> Signed-off-by: David S. Miller <>
2012-12-12net/mlx4_en: Use generic etherdevice.h functions.Yan Burman-4/+2
Get rid of full_mac, zero_mac in favour of is_zero_ether_addr and is_broadcast_ether_addr. Signed-off-by: Yan Burman <> Signed-off-by: Amir Vadai <> Signed-off-by: David S. Miller <>
2012-12-12net: ethtool: Add destination MAC address to flow steering APIYan Burman-4/+7
Add ability to specify destination MAC address for L3/L4 flow spec in order to be able to specify action for different VM's under vSwitch configuration. This change is transparent to older userspace. Signed-off-by: Yan Burman <> Signed-off-by: Amir Vadai <> Signed-off-by: David S. Miller <>
2012-12-12bridge: add support of adding and deleting mdb entriesCong Wang-29/+297
This patch implents adding/deleting mdb entries via netlink. Currently all entries are temp, we probably need a flag to distinguish permanent entries too. Cc: Herbert Xu <> Cc: Stephen Hemminger <> Cc: "David S. Miller" <> Cc: Thomas Graf <> Signed-off-by: Cong Wang <> Signed-off-by: David S. Miller <>
2012-12-12bridge: notify mdb changes via netlinkCong Wang-0/+90
As Stephen mentioned, we need to monitor the mdb changes in user-space, so add notifications via netlink too. Cc: Herbert Xu <> Cc: Stephen Hemminger <> Cc: "David S. Miller" <> Cc: Thomas Graf <> Signed-off-by: Cong Wang <> Signed-off-by: David S. Miller <>
2012-12-12ndisc: Unexport ndisc_{build,send}_skb().YOSHIFUJI Hideaki-31/+11
These symbols were exported for bonding device by commit 305d552a ("bonding: send IPv6 neighbor advertisement on failover"). It bacame obsolete by commit 7c899432 ("bonding, ipv4, ipv6, vlan: Handle NETDEV_BONDING_FAILOVER like NETDEV_NOTIFY_PEERS") and removed by commit 4f5762ec ("bonding: Remove obsolete source file 'bond_ipv6.c'"). Signed-off-by: YOSHIFUJI Hideaki <> Signed-off-by: David S. Miller <>
2012-12-12uapi: add missing netconf.h to export liststephen hemminger-0/+1
Add netconf.h for use by iproute2. Signed-off-by: Stephen Hemminger <> Acked-by: Nicolas Dichtel <> Signed-off-by: David S. Miller <>
2012-12-12Merge branch 'for-next' of git:// Torvalds-954/+787
Pull CIFS fixes from Steve French: "This includes a set of misc. cifs fixes (most importantly some byte range lock related write fixes from Pavel, and some ACL and idmap related fixes from Jeff) but also includes the SMB2.02 dialect enablement, and a key fix for SMB3 mounts. Default authentication upgraded to ntlmv2 for cifs (it was already ntlmv2 for smb2)" * 'for-next' of git:// (43 commits) CIFS: Fix write after setting a read lock for read oplock files cifs: parse the device name into UNC and prepath cifs: fix up handling of prefixpath= option cifs: clean up handling of unc= option cifs: fix SID binary to string conversion fix "disabling echoes and oplocks" on SMB2 mounts Do not send SMB2 signatures for SMB3 frames cifs: deal with id_to_sid embedded sid reply corner case cifs: fix hardcoded default security descriptor length cifs: extra sanity checking for cifs.idmap keys cifs: avoid extra allocation for small cifs.idmap keys cifs: simplify id_to_sid and sid_to_id mapping code CIFS: Fix possible data coherency problem after oplock break to None CIFS: Do not permit write to a range mandatory locked with a read lock cifs: rename cifs_readdir_lookup to cifs_prime_dcache and make it void return cifs: Add CONFIG_CIFS_DEBUG and rename use of CIFS_DEBUG cifs: Make CIFS_DEBUG possible to undefine SMB3 mounts fail with access denied to some servers cifs: Remove unused cEVENT macro cifs: always zero out smb_vol before parsing options ...
2012-12-12Merge tag 'for-linus-v3.8-rc1' of git:// Torvalds-2311/+3747
Pull xfs update from Ben Myers: "There is plenty going on, including the cleanup of xfssyncd, metadata verifiers, CRC infrastructure for the log, tracking of inodes with speculative allocation, a cleanup of xfs_fs_subr.c, fixes for XFS_IOC_ZERO_RANGE, and important fix related to log replay (only update the last_sync_lsn when a transaction completes), a fix for deadlock on AGF buffers, documentation and comment updates, and a few more cleanups and fixes. Details: - remove the xfssyncd mess - only update the last_sync_lsn when a transaction completes - zero allocation_args on the kernel stack - fix AGF/alloc workqueue deadlock - silence uninitialised f.file warning - Update inode alloc comments - Update mount options documentation - report projid32bit feature in geometry call - speculative preallocation inode tracking - fix attr tree double split corruption - fix broken error handling in xfs_vm_writepage - drop buffer io reference when a bad bio is built - add more attribute tree trace points - growfs infrastructure changes for 3.8 - fs/xfs/xfs_fs_subr.c die die die - add CRC infrastructure - add CRC checks to the log - Remove description of nodelaylog mount option from xfs.txt - inode allocation should use unmapped buffers - byte range granularity for XFS_IOC_ZERO_RANGE - fix direct IO nested transaction deadlock - fix stray dquot unlock when reclaiming dquots - fix sparse reported log CRC endian issue" Fix up trivial conflict in fs/xfs/xfs_fsops.c due to the same patch having been applied twice (commits eaef854335ce and 1375cb65e87b: "xfs: growfs: don't read garbage for new secondary superblocks") with later updates to the affected code in the XFS tree. * tag 'for-linus-v3.8-rc1' of git:// (78 commits) xfs: fix sparse reported log CRC endian issue xfs: fix stray dquot unlock when reclaiming dquots xfs: fix direct IO nested transaction deadlock. xfs: byte range granularity for XFS_IOC_ZERO_RANGE xfs: inode allocation should use unmapped buffers. xfs: Remove the description of nodelaylog mount option from xfs.txt xfs: add CRC checks to the log xfs: add CRC infrastructure xfs: convert buffer verifiers to an ops structure. xfs: connect up write verifiers to new buffers xfs: add pre-write metadata buffer verifier callbacks xfs: add buffer pre-write callback xfs: Add verifiers to dir2 data readahead. xfs: add xfs_da_node verification xfs: factor and verify attr leaf reads xfs: factor dir2 leaf read xfs: factor out dir2 data block reading xfs: factor dir2 free block reading xfs: verify dir2 block format buffers xfs: factor dir2 block read operations ...
2012-12-12Merge tag 'dlm-3.8' of ↵Linus Torvalds-14/+47
git:// Pull dlm updates from David Teigland: "This set fixes some conditions in which value blocks are invalidated, and includes two trivial cleanups." * tag 'dlm-3.8' of git:// dlm: fix lvb invalidation conditions fs/dlm: remove CONFIG_EXPERIMENTAL dlm: remove unused variable in *dlm_lowcomms_get_buffer()
2012-12-12Merge branch 'for-3.8' of ↵Linus Torvalds-1086/+1255
git:// Pull cgroup changes from Tejun Heo: "A lot of activities on cgroup side. The big changes are focused on making cgroup hierarchy handling saner. - cgroup_rmdir() had peculiar semantics - it allowed cgroup destruction to be vetoed by individual controllers and tried to drain refcnt synchronously. The vetoing never worked properly and caused good deal of contortions in cgroup. memcg was the last reamining user. Michal Hocko removed the usage and cgroup_rmdir() path has been simplified significantly. This was done in a separate branch so that the memcg people can base further memcg changes on top. - The above allowed cleaning up cgroup lifecycle management and implementation of generic cgroup iterators which are used to improve hierarchy support. - cgroup_freezer updated to allow migration in and out of a frozen cgroup and handle hierarchy. If a cgroup is frozen, all descendant cgroups are frozen. - netcls_cgroup and netprio_cgroup updated to handle hierarchy properly. - Various fixes and cleanups. - Two merge commits. One to pull in memcg and rmdir cleanups (needed to build iterators). The other pulled in cgroup/for-3.7-fixes for device_cgroup fixes so that further device_cgroup patches can be stacked on top." Fixed up a trivial conflict in mm/memcontrol.c as per Tejun (due to commit bea8c150a7 ("memcg: fix hotplugged memory zone oops") in master touching code close to commit 2ef37d3fe4 ("memcg: Simplify mem_cgroup_force_empty_list error handling") in for-3.8) * 'for-3.8' of git:// (65 commits) cgroup: update Documentation/cgroups/00-INDEX cgroup_rm_file: don't delete the uncreated files cgroup: remove subsystem files when remounting cgroup cgroup: use cgroup_addrm_files() in cgroup_clear_directory() cgroup: warn about broken hierarchies only after css_online cgroup: list_del_init() on removed events cgroup: fix lockdep warning for event_control cgroup: move list add after list head initilization netprio_cgroup: allow nesting and inherit config on cgroup creation netprio_cgroup: implement netprio[_set]_prio() helpers netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx netprio_cgroup: reimplement priomap expansion netprio_cgroup: shorten variable names in extend_netdev_table() netprio_cgroup: simplify write_priomap() netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking cgroup: remove obsolete guarantee from cgroup_task_migrate. cgroup: add cgroup->id cgroup, cpuset: remove cgroup_subsys->post_clone() cgroup: s/CGRP_CLONE_CHILDREN/CGRP_CPUSET_CLONE_CHILDREN/ cgroup: rename ->create/post_create/pre_destroy/destroy() to ->css_alloc/online/offline/free() ...
2012-12-12Merge branch 'for-3.8' of ↵Linus Torvalds-1/+4
git:// Pull percpu changes from Tejun Heo: "Nothing exciting here either. Joonsoo's is almost cosmetic. Cyrill's patch fixes "percpu_alloc" early kernel param handling so that the kernel doesn't crash when the parameter is specified w/o any argument." * 'for-3.8' of git:// mm, percpu: Make sure percpu_alloc early parameter has an argument percpu: make pcpu_free_chunk() use pcpu_mem_free() instead of kfree()
2012-12-12Merge branch 'for-3.8' of git:// Torvalds-2/+4
Pull workqueue changes from Tejun Heo: "Nothing exciting. Just two trivial changes." * 'for-3.8' of git:// workqueue: add WARN_ON_ONCE() on CPU number to wq_worker_waking_up() workqueue: trivial fix for return statement in work_busy()
2012-12-12Merge branch 'release' of ↵Linus Torvalds-398/+2038
git:// Pull thermal management update from Zhang Rui: "Highlights: - Introduction of thermal policy support, together with three new thermal governors, including step_wise, user_space, fire_share. - Introduction of ST-Ericsson db8500_thermal driver and ST-Ericsson db8500_cpufreq_cooling driver. - Thermal Kconfig file and Makefile refactor. - Fixes for generic thermal layer, generic cpucooling, rcar thermal driver and Exynos thermal driver." * 'release' of git:// (36 commits) Thermal: Fix DEFAULT_THERMAL_GOVERNOR Thermal: fix a NULL pointer dereference when generic thermal layer is built as a module thermal: rcar: add rcar_zone_to_priv() macro thermal: rcar: fixup the unit of temperature thermal: cpu cooling: allow module builds thermal: cpu cooling: use const parameter while registering Thermal: Add ST-Ericsson DB8500 thermal properties and platform data. Thermal: Add ST-Ericsson DB8500 thermal driver. drivers/thermal/Makefile refactor Exynos: Add missing dependency Refactor drivers/thermal/Kconfig thermal: cpu_cooling: Make 'notify_device' static Thermal: Remove the cooling_cpufreq_list. Thermal: fix bug of counting cpu frequencies. Thermal: add indent for code alignment. thermal: rcar_thermal: remove explicitly used devm_kfree/iounap() thermal: user_space: Add missing static storage class specifiers thermal: fair_share: Add missing static storage class specifiers thermal: step_wise: Add missing static storage class specifiers Thermal: Fix oops and unlocking in thermal_sys.c ...
2012-12-12Merge tag 'regmap-3.8' of ↵Linus Torvalds-102/+453
git:// Pull regmap updates from Mark Brown: "Quite a few enhancements this time around, helpers and diagnostics for the most part which is good to see: - Addition of table based lookups for the register access checks from Davide Ciminaghi, making life easier for drivers with big blocks of similar registers. - Allow drivers to get the irqdomain for regmap irq_chips, allowing the domain to be used with other APIs. - Debug improvements for paged register maps. - Performance improvments for some of the diagnostic infrastructure, very helpful for devices with large register maps." * tag 'regmap-3.8' of git:// regmap: debugfs: Cache offsets of valid regions for dump regmap: debugfs: Factor out initial seek regmap: debugfs: Avoid overflows for very small reads regmap: Cache register and value sizes for debugfs regmap: introduce tables for readable/writeable/volatile/precious checks regmap: core: Report registers in hex when we can't cache regmap: Fix printing of size_t variable regmap: make lock/unlock functions customizable regmap: silence GCC warning regmap: Split raw writes that cross window boundaries regmap: Make return code checks consistent regmap: Factor range lookup out of page selection regmap: Provide debugfs read of register ranges regmap: Factor out debugfs register read regmap: Allow ranges to be named regmap: When we sanity check during range adds say what errors we find regmap: Rename n_ranges to num_ranges regmap: irq: Allow users to retrieve the irq_domain
2012-12-12Merge tag 'please-pull-einj-fix-for-acpi5' of ↵Linus Torvalds-1/+1
git:// Pull ACPI5 error injection fix from Tony Luck: "Trivial fix for error injection code using ACPI5 version of EINJ" * tag 'please-pull-einj-fix-for-acpi5' of git:// ACPI, APEI, EINJ: Add missed ACPI5 support for error trigger table
2012-12-12Merge tag 'please-pull-pstore_mevent' of ↵Linus Torvalds-73/+144
git:// Pull pstore fixes from Tony Luck: "Patch series to allow EFI variable backend to pstore to hold multiple records." * tag 'please-pull-pstore_mevent' of git:// efi_pstore: Add a format check for an existing variable name at erasing time efi_pstore: Add a format check for an existing variable name at reading time efi_pstore: Add a sequence counter to a variable name efi_pstore: Add ctime to argument of erase callback efi_pstore: Remove a logic erasing entries from a write callback to hold multiple logs efi_pstore: Add a logic erasing entries to an erase callback efi_pstore: Check remaining space with QueryVariableInfo() before writing data
2012-12-12Merge tag 'please-pull-misc-3.8' of ↵Linus Torvalds-2/+2
git:// Pull ia64 fix from Tony Luck: "Miscellaneous ia64 fix for 3.8. Just need to avoid a pending namespace collision from other work being merged." * tag 'please-pull-misc-3.8' of git:// [IA64] Resolve name space collision for cache_show()
2012-12-12Merge tag 'arm64-for-linus' of ↵Linus Torvalds-368/+473
git:// Pull ARM64 updates from Catalin Marinas: - Generic execve, kernel_thread, fork/vfork/clone. - Preparatory patches for KVM support (initialising EL2 mode for later installing KVM support, hypervisor stub). - Signal handling corner case fix (alternative signal stack set up for a SEGV handler, which is raised in response to RLIMIT_STACK being reached). - Sub-nanosecond timer error fix. * tag 'arm64-for-linus' of git:// (30 commits) arm64: Update the MAINTAINERS entry arm64: compat for clock_adjtime(2) is miswired arm64: move FP-SIMD save/restore code to a macro arm64: hyp: initialize vttbr_el2 to zero arm64: add hypervisor stub arm64: record boot mode when entering the kernel arm64: move vector entry macro to assembler.h arm64: add AArch32 execution modes to ptrace.h arm64: expand register mapping between AArch32 and AArch64 arm64: generic timer: use virtual counter instead of physical at EL0 arm64: vdso: defer shifting of nanosecond component of timespec arm64: vdso: rework __do_get_tspec register allocation and return shift arm64: vdso: check sequence counter even for coarse realtime operations arm64: vdso: fix clocksource mask when extracting bottom 56 bits ARM64: Remove incorrect Kconfig symbol HAVE_SPARSE_IRQ Documentation: Fixes a word in Documentation/arm64/memory.txt arm64: Make !dirty ptes read-only arm64: Convert empty flush_cache_{mm,page} functions to static inline arm64: signal: let the compiler inline compat_get_sigframe arm64: signal: return struct rt_sigframe from get_sigframe ... Conflicts: arch/arm64/include/asm/unistd32.h
2012-12-12MN10300: Use asm-generic/pci_iomap.hDavid Howells-0/+1
The declarations from MN10300's pci_iomap() was removed by commit 34f1bdee1910f7efe3c32e1a891dba4fd21cb3b6 but asm-generic/pci_iomap.h wasn't then #included from asm/io.h. Signed-off-by: David Howells <>
2012-12-12MN10300: Get rid of unused variable from ASB2305 PCI codeDavid Howells-3/+1
Get rid of an unused variable in pcibios_fixup_device_resources() which leads to the following warning: arch/mn10300/unit-asb2305/pci.c: In function 'pcibios_fixup_device_resources': arch/mn10300/unit-asb2305/pci.c:324:24: warning: unused variable 'region' [-Wunused-variable] Whilst we're at it, merge the two integer variable declarations into one line. Signed-off-by: David Howells <>
2012-12-12MN10300: ASB2305 PCI code needs linux/irq.hDavid Howells-0/+1
ASB2305 PCI code needs to #include linux/irq.h for XIRQ1 so that it can set the CPU interrupt priority level on the PCI interrupt. Signed-off-by: David Howells <>
2012-12-12mn10300/mm/fault.c: Port OOM changes to do_page_faultKautuk Consul-8/+25
Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to mn10300. Signed-off-by: Kautuk Consul <> Signed-off-by: David Howells <>
2012-12-12MN10300: Handle cacheable PCI regions in pci_iomap()David Howells-1/+36
Handle cacheable PCI regions in pci_iomap(). If IORESOURCE_CACHEABLE is set then we AND away the 0x20000000 "flag". Signed-off-by: David Howells <>
2012-12-12MN10300: fix debug polling in ttySM driverMark Salter-12/+23
The debug polling interface for the SoC serial ports did not work in the case where the serial ports were not also used as a console. In that case, the uart driver startup function will not be called so tx and rx would not be enabled in the hardware control register. Also, vdma interrupts would not be enabled which the poll_get_char function relied on. This patch makes sure that the rx and tx enables are set as a consequence of the uart set_termios call which is the only initialization done for the debug polling interface. Also, the poll_get_char now handles the case where vdma interrupts are not enabled. Signed-off-by: Mark Salter <> Signed-off-by: David Howells <>
2012-12-12MN10300: ttySM: clean up unnecessary castingMark Salter-6/+6
The ttySM uart data register pointers are declared as void* pointers. Change them to u8* pointers so we don't need to use casts in the code. Signed-off-by: Mark Salter <> Signed-off-by: David Howells <>
2012-12-12MN10300: fix SMP synchronization between txdma and serial driverMark Salter-48/+90
The SoC serial port driver uses a high priority interrupt to handle tx of characters in the tx ring buffer. The driver needs to disable/enable this IRQ from outside of irq context. The original code to do this is not foolproof on SMP machines because the IRQ running on one core could still access the serial port for a short time after the driver running on another core disables the interrupt. This patch adds a flag to tell the IRQ handler that the driver wants to disable the interrupt. After seeing the flag, the IRQ handler will immediately disable the interrupt and exit. After setting the flag, the driver will wait for interrupt to be disabled by the IRQ handler. Signed-off-by: Mark Salter <> Signed-off-by: David Howells <>
2012-12-12MN10300: fix serial port vdma irq setup for SMPMark Salter-4/+30
The builtin SoC serial ports have no FIFOs and use a virtual DMA mechanism based on high priority IRQs to avoid overruns. These high priority interrupts are pinned to cpu#0 on SMP systems. This patch fixes a problem with SMP where the set_intr_level() interface is used to set the priority for these IRQs. The set_intr_level() function sets priority on the local cpu but on SMP systems, this code may be run on some other cpu than the one handling the interrupts. Instead of setting interrupt level explicitly, this patch uses a special irq_chip for these interrupts so that the mask/unmask methods can set the interrupt level implicitly. Signed-off-by: Mark Salter <> Signed-off-by: David Howells <>
2012-12-12MN10300: cleanup IRQ affinity settingMark Salter-52/+17
The irq_set_affinity handler for the mn10300 cpu pic had some hard-coded IRQs which were not to be migrated from one cpu to another. This patch cleans those up by using a combination of IRQF_NOBALANCING and specialized irq chips with no irq_set_affinity handler. This maintains the previous behavior by using generic IRQ interfaces rather than hard coding IRQ numbers in the default irq_set_affinity handler. Signed-off-by: Mark Salter <> Signed-off-by: David Howells <>
2012-12-12MN10300: ttySM: Use memory barriers correctly in circular buffer logicDavid Howells-6/+8
Use memory barriers correctly in the circular buffer logic used in the driver, as documented in Documentation/circular-buffers.txt. Signed-off-by: David Howells <> Signed-off-by: Mark Salter <>
2012-12-12Merge branch 'omap-serial' of git:// Torvalds-150/+213
Pull ARM OMAP serial updates from Russell King: "This series is a major reworking of the OMAP serial driver code fixing various bugs in the hardware-assisted flow control, extending up into serial_core for a couple of issues. These fixes have been done as a set of progressive changes and transformations in the hope that no new bugs will be introduced by this series. The problems are many-fold, from the driver not being informed about updated settings, to the driver not knowing what the intentions of the upper layers are. The first four patches tackle the serial_core layer, allowing it to provide the necessary information to drivers, and the remaining patches allow the OMAP serial driver to take advantage of this. This brings hardware assisted RTS/CTS and XON/OFF flow control into a useful state. These patches have been in linux-next for most of the last cycle; indeed they predate the previous merge window. They've also been posted to the OMAP people." * 'omap-serial' of git:// (21 commits) SERIAL: omap: fix hardware assisted flow control SERIAL: omap: simplify (2) SERIAL: omap: move xon/xoff setting earlier SERIAL: omap: always set TCR SERIAL: omap: simplify SERIAL: omap: don't read back LCR/MCR/EFR SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios SERIAL: omap: configure xon/xoff before setting modem control lines SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR SERIAL: omap: move driver private definitions and structures to driver SERIAL: omap: remove 'irq_pending' bitfield SERIAL: omap: fix MCR TCRTLR bit handling SERIAL: omap: fix set_mctrl() breakage SERIAL: omap: no need to re-read EFR SERIAL: omap: remove setting of EFR SCD bit SERIAL: omap: allow hardware assisted IXANY mode to be disabled SERIAL: omap: allow hardware assisted rts/cts modes to be disabled SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control SERIAL: core: add hardware assisted h/w flow control support SERIAL: core: add hardware assisted s/w flow control support ... Conflicts: drivers/tty/serial/omap-serial.c
2012-12-12Thermal: Fix DEFAULT_THERMAL_GOVERNORZhang Rui-3/+9
Fix DEFAULT_THERMAL_GOVERNOR to be consistant with the default governor selected in kernel config file. Signed-off-by: Zhang Rui <>