AgeCommit message (Collapse)AuthorLines
2012-06-02Linux 3.5-rc1v3.5-rc1Linus Torvalds-2/+2
2012-06-02Merge tag 'dm-3.5-changes-1' of ↵Linus Torvalds-90/+322
git:// Pull device-mapper updates from Alasdair G Kergon: "Improve multipath's retrying mechanism in some defined circumstances and provide a simple reserve/release mechanism for userspace tools to access thin provisioning metadata while the pool is in use." * tag 'dm-3.5-changes-1' of git:// dm thin: provide userspace access to pool metadata dm thin: use slab mempools dm mpath: allow ioctls to trigger pg init dm mpath: delay retry of bypassed pg dm mpath: reduce size of struct multipath
2012-06-03dm thin: provide userspace access to pool metadataJoe Thornber-11/+193
This patch implements two new messages that can be sent to the thin pool target allowing it to take a snapshot of the _metadata_. This, read-only snapshot can be accessed by userland, concurrently with the live target. Only one metadata snapshot can be held at a time. The pool's status line will give the block location for the current msnap. Since version 0.1.5 of the userland thin provisioning tools, the thin_dump program displays the msnap as follows: thin_dump -m <msnap root> <metadata dev> Available here: Now that userland can access the metadata we can do various things that have traditionally been kernel side tasks: i) Incremental backups. By using metadata snapshots we can work out what blocks have changed over time. Combined with data snapshots we can ensure the data doesn't change while we back it up. A short proof of concept script can be found here: ii) Migration of thin devices from one pool to another. iii) Merging snapshots back into an external origin. iv) Asyncronous replication. Signed-off-by: Joe Thornber <> Signed-off-by: Alasdair G Kergon <>
2012-06-03dm thin: use slab mempoolsMike Snitzer-62/+99
Use dedicated caches prefixed with a "dm_" name rather than relying on kmalloc mempools backed by generic slab caches so the memory usage of thin provisioning (and any leaks) can be accounted for independently. Signed-off-by: Mike Snitzer <> Signed-off-by: Alasdair G Kergon <>
2012-06-03dm mpath: allow ioctls to trigger pg initMikulas Patocka-9/+17
After the failure of a group of paths, any alternative paths that need initialising do not become available until further I/O is sent to the device. Until this has happened, ioctls return -EAGAIN. With this patch, new paths are made available in response to an ioctl too. The processing of the ioctl gets delayed until this has happened. Instead of returning an error, we submit a work item to kmultipathd (that will potentially activate the new path) and retry in ten milliseconds. Note that the patch doesn't retry an ioctl if the ioctl itself fails due to a path failure. Such retries should be handled intelligently by the code that generated the ioctl in the first place, noting that some SCSI commands should not be retried because they are not idempotent (XOR write commands). For commands that could be retried, there is a danger that if the device rejected the SCSI command, the path could be errorneously marked as failed, and the request would be retried on another path which might fail too. It can be determined if the failure happens on the device or on the SCSI controller, but there is no guarantee that all SCSI drivers set these flags correctly. Signed-off-by: Mikulas Patocka <> Signed-off-by: Alasdair G Kergon <>
2012-06-03dm mpath: delay retry of bypassed pgMike Christie-2/+6
If I/O needs retrying and only bypassed priority groups are available, set the pg_init_delay_retry flag to wait before retrying. If, for example, the reason for the bypass is that the controller is getting reset or there is a firmware upgrade happening, retrying right away would cause a flood of log messages and retries for what could be a few seconds or even several minutes. Signed-off-by: Mike Christie <> Acked-by: Mike Snitzer <> Signed-off-by: Alasdair G Kergon <>
2012-06-03dm mpath: reduce size of struct multipathMike Snitzer-6/+7
Move multipath structure's 'lock' and 'queue_size' members to eliminate two 4-byte holes. Also use a bit within a single unsigned int for each existing flag (saves 8-bytes). This allows future flags to be added without each consuming an unsigned int. Signed-off-by: Mike Snitzer <> Acked-by: Hannes Reinecke <> Signed-off-by: Alasdair G Kergon <>
2012-06-02Merge git:// Torvalds-84/+201
Pull networking updates from David Miller: 1) Make syn floods consume significantly less resources by a) Not pre-COW'ing routing metrics for SYN/ACKs b) Mirroring the device queue mapping of the SYN for the SYN/ACK reply. Both from Eric Dumazet. 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA. 3) Validate the length requested when building a paged SKB for a socket, so we don't overrun the page vector accidently. From Jason Wang. 4) When netlabel is disabled, we abort all IP option processing when we see a CIPSO option. This isn't the right thing to do, we should simply skip over it and continue processing the remaining options (if any). Fix from Paul Moore. 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel Apfelbaum. 6) 8139cp enables the receiver before the ring address is properly programmed, which potentially lets the device crap over random memory. Fix from Jason Wang. 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer address reference in jumbo RX frame processing from Bruce Allan and Sebastian Andrzej Siewior, respectively. * git:// fec_mpc52xx: fix timestamp filtering mcs7830: Implement link state detection e1000e: fix Rapid Start Technology support for i217 e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats() r8169: call netif_napi_del at errpaths and at driver unload tcp: reflect SYN queue_mapping into SYNACK packets tcp: do not create inetpeer on SYNACK message 8139cp/8139too: terminate the eeprom access with the right opmode 8139cp: set ring address before enabling receiver cipso: handle CIPSO options correctly when NetLabel is disabled net: sock: validate data_len before allocating skb in sock_alloc_send_pskb() bql: Avoid possible inconsistent calculation. bql: Avoid unneeded limit decrement. bql: Fix POSDIFF() to integer overflow aware. net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap net/mlx4_core: Fixes for VF / Guest startup flow net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event net/mlx4_core: Fix number of EQs used in ICM initialisation net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
2012-06-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds-39/+297
git:// Pull straggler x86 fixes from Peter Anvin: "Three groups of patches: - EFI boot stub documentation and the ability to print error messages; - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which should never have been ported, and the port is broken and potentially dangerous.) - ftrace stack corruption fixes. I'm not super-happy about the technical implementation, but it is probably the least invasive in the short term. In the future I would like a single method for nesting the debug stack, however." * 'x86-urgent-for-linus' of git:// x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32 x86, efi: Add EFI boot stub documentation x86, efi; Add EFI boot stub console support x86, efi: Only close open files in error path ftrace/x86: Do not change stacks in DEBUG when calling lockdep x86: Allow nesting of the debug stack IDT setting x86: Reset the debug_stack update counter ftrace: Use breakpoint method to update ftrace caller ftrace: Synchronize variable setting with breakpoints
2012-06-02tty: Revert the tty locking series, it needs more workLinus Torvalds-191/+119
This reverts the tty layer change to use per-tty locking, because it's not correct yet, and fixing it will require some more deep surgery. The main revert is d29f3ef39be4 ("tty_lock: Localise the lock"), but there are several smaller commits that built upon it, they also get reverted here. The list of reverted commits is: fde86d310886 - tty: add lockdep annotations 8f6576ad476b - tty: fix ldisc lock inversion trace d3ca8b64b97e - pty: Fix lock inversion b1d679afd766 - tty: drop the pty lock during hangup abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock() fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call d29f3ef39be4 - tty_lock: Localise the lock The revert had a trivial conflict in the 68360serial.c staging driver that got removed in the meantime. Signed-off-by: Linus Torvalds <>
2012-06-02fec_mpc52xx: fix timestamp filteringStephan Gatzka-1/+1
skb_defer_rx_timestamp was called with a freshly allocated skb but must be called with rskb instead. Signed-off-by: Stephan Gatzka <> Cc: stable <> Acked-by: Richard Cochran <> Signed-off-by: David S. Miller <>
2012-06-02mcs7830: Implement link state detectionOndrej Zary-2/+23
Add .status callback that detects link state changes. Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver). Fixes Signed-off-by: Ondrej Zary <> Signed-off-by: David S. Miller <>
2012-06-02Merge 'for-linus' branches from ↵Linus Torvalds-2/+2
git://{vfs,signal} Pull vfs fix and a fix from the signal changes for frv from Al Viro. The __kernel_nlink_t for powerpc got scrogged because 64-bit powerpc actually depended on the default "unsigned long", while 32-bit powerpc had an explicit override to "unsigned short". Al didn't notice, and made both of them be the unsigned short. The frv signal fix is fallout from simplifying the do_notify_resume() code, and leaving an extra parenthesis. * 'for-linus' of git:// powerpc: Fix size of st_nlink on 64bit * 'for-linus' of git:// frv: Remove bogus closing parenthesis
2012-06-02powerpc: Fix size of st_nlink on 64bitAnton Blanchard-1/+1
commit e57f93cc53b7 (powerpc: get rid of nlink_t uses, switch to explicitly-sized type) changed the size of st_nlink on ppc64 from a long to a short, resulting in boot failures. Signed-off-by: Anton Blanchard <> Signed-off-by: Al Viro <>
2012-06-02frv: Remove bogus closing parenthesisGeert Uytterhoeven-1/+1
Introduced by commit 6fd84c0831ec78d98736b76dc5e9b849f1dbfc9e ("TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set") Signed-off-by: Geert Uytterhoeven <> Signed-off-by: Al Viro <>
2012-06-02e1000e: fix Rapid Start Technology support for i217Bruce Allan-9/+9
The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY register greater than the maximum allowed by the latter macro, and fix a typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan. Also for clarity, rename a few defines as bit definitions instead of masks. Signed-off-by: Bruce Allan <> Tested-by: Aaron Brown <> Signed-off-by: Jeff Kirsher <>
2012-06-02e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()Sebastian Andrzej Siewior-1/+1
This is another fixup where the data is not transfered into buffer addressed by skb->data but into a page. Signed-off-by: Sebastian Andrzej Siewior <> Tested-by: Aaron Brown <> Signed-off-by: Jeff Kirsher <>
2012-06-01Merge branch 'akpm' (Fixups for Andrew's patchbomb)Linus Torvalds-45/+33
Merge fixups for the mac NLS tables from Andrew. * emailed from Andrew Morton, and one cleanup by me: nls: fix (and rename) mac NLS table files and config options fs/nls/Makefile: remove bogus CONFIG_ assignments
2012-06-01nls: fix (and rename) mac NLS table files and config optionsLinus Torvalds-33/+33
The config options in the Kconfig file (with _CODEPAGE_ in the name) didn't match the config option name in the Makefile (no _CODEPAGE_). And both of them were of the hard-to-read MACXYZZY variety, which made them hard to parse for normal humans: MACROMAN easily reads as "macro man", not as "Mac Roman". So rename the options to be consistent, and be NLS_MAC_xyzzy. Rename the files to be mac-xyzzy.c too, and drop the "nls" part entirely (it's already in the directory name). Signed-off-by: Linus Torvalds <>
2012-06-01fs/nls/Makefile: remove bogus CONFIG_ assignmentsAndrew Morton-12/+0
These were debug things which snuck through. Reported-by: Yinghai Lu <> Cc: Vladimir Serbinenko <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2012-06-01Merge tag 'fbdev-updates-for-3.5' of git:// Torvalds-2155/+5467
Pull fbdev updates from Florian Tobias Schandinat: - driver for AUO-K1900 and AUO-K1901 epaper controller - large updates for OMAP (e.g. decouple HDMI audio and video) - some updates for Exynos and SH Mobile - various other small fixes and cleanups * tag 'fbdev-updates-for-3.5' of git:// (130 commits) video: bfin_adv7393fb: Fix cleanup code video: exynos_dp: reduce delay time when configuring video setting video: exynos_dp: move sw reset prioir to enabling sw defined function video: exynos_dp: use devm_ functions fb: handle NULL pointers in framebuffer release OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request OMAPDSS: Apply VENC timings even if panel is disabled OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC OMAPDSS: DISPC: Support rotation through TILER OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n OMAPFB: remove compiler warnings when CONFIG_BUG=n OMAPDSS: remove compiler warnings when CONFIG_BUG=n OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods OMAPDSS: DISPC: Update Accumulator configuration for chroma plane drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers video: exynos mipi dsi: support reverse panel type video: exynos mipi dsi: Properly interpret the interrupt source flags video: exynos mipi dsi: Avoid races in probe() ...
2012-06-01Merge tag 'for-linus-3.5-20120601' of git:// Torvalds-792/+1775
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git:// (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-06-01Merge branch 'for_linus' of git:// Torvalds-629/+1416
Pull x86 platform driver updates from Matthew Garrett: "Some significant improvements for the Sony driver on newer machines, but other than that mostly just minor fixes and a patch to remove the broken rfkill code from the Dell driver." * 'for_linus' of git:// (35 commits) apple-gmux: Fix up the suspend/resume patch dell-laptop: Remove rfkill code toshiba_acpi: Fix mis-merge dell-laptop: Add touchpad led support for Dell V3450 acer-wmi: add 3 laptops to video backlight vendor mode quirk table sony-laptop: add touchpad enable/disable function sony-laptop: add missing Fn key combos for 0x100 handlers sony-laptop: add support for more WWAN modems sony-laptop: new keyboard backlight handle sony-laptop: add high speed battery charging function sony-laptop: support automatic resume on lid open sony-laptop: adjust error handling in finding SNC handles sony-laptop: add thermal profiles support sony-laptop: support battery care functions sony-laptop: additional debug statements sony-laptop: improve SNC initialization and acpi notify callback code sony-laptop: use kstrtoul to parse sysfs values sony-laptop: generalise ACPI calls into SNC functions sony-laptop: fix return path when no ACPI buffer is allocated sony-laptop: use soft rfkill status stored in hw ...
2012-06-01Merge branch 'slab/for-linus' of ↵Linus Torvalds-11/+14
git:// Pull slab updates from Pekka Enberg: "Mainly a bunch of SLUB fixes from Joonsoo Kim" * 'slab/for-linus' of git:// slub: use __SetPageSlab function to set PG_slab flag slub: fix a memory leak in get_partial_node() slub: remove unused argument of init_kmem_cache_node() slub: fix a possible memory leak Documentations: Fix slabinfo.c directory in vm/slub.txt slub: fix incorrect return type of get_any_partial()
2012-06-01Merge remote-tracking branch 'rostedt/tip/perf/urgent-2' into ↵H. Peter Anvin-16/+154
2012-06-01Merge branch 'ux500/hickup' of ↵Linus Torvalds-22/+301
git:// Pull arm fixes for ux500 mismerge mishap from Arnd Bergmann: "The device tree conversion for arm/ux500 in 3.5 turns out to be incomplete because of a mismerge done by Linus Walleij that I failed to notice early enough and that Lee Jones as the original author of those patches did not manage to fix during the -next cycle. While we originally to get a much larger set of ux500 device tree enablement patches merged, this did not happen in time. After some discussion at Linaro Connect conference this week, Lee has been able to do damage control and provide a series to put the broken platform back into usable shape for both DT and non-DT based booting. This series has not been part of linux-next and is based on top of the current state of the upstream kernel rather than an -rc, but this is the best we could manage given the earlier breakage." * 'ux500/hickup' of git:// ARM: ux500: Enable probing of pinctrl through Device Tree ARM: ux500: Add support for ab8500 regulators into the Device Tree ARM: ux500: Provide regulator support for SMSC911x via Device Tree ARM: ux500: Allow PRCMU regulator to be probed during a DT enabled boot ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree ARM: ux500: Only initialise STE's UIBs on boards which support them ARM: ux500: Disable platform setup of the ab8500 when DT is enabled ARM: ux500: Use correct format for dynamic IRQ assignment ARM: ux500: Re-enable SMSC911x platform code registration during non-DT boots ARM: ux500: PRCMU related configuration and layout corrections for Device Tree ARM: ux500: Remove DB8500 PRCMU platform registration when DT is enabled ARM: ux500: Disable SMSC911x platform code registration when DT is enabled ARM: ux500: New DT:ed u8500_init_devices for one-by-one device enablement ARM: ux500: New DT:ed snowball_platform_devs for one-by-one device enablement pinctrl-nomadik: Allow Device Tree driver probing
2012-06-01r8169: call netif_napi_del at errpaths and at driver unloadDevendra Naga-0/+3
when register_netdev fails, the init'ed NAPIs by netif_napi_add must be deleted with netif_napi_del, and also when driver unloads, it should delete the NAPI before unregistering netdevice using unregister_netdev. Signed-off-by: Devendra Naga <> Signed-off-by: David S. Miller <>
2012-06-01Merge branch 'drm-fixes' of git:// Torvalds-1017/+321
Pull drm fixes from Dave Airlie: "A bunch of fixes: - vmware memory corruption - ttm spinlock balance - cirrus/mgag200 work in the presence of efifb and finally Alex and Jerome managed to track down a magic set of bits that on certain rv740 and evergreen cards allow the correct use of the complete set of render backends, this makes the cards operate correctly in a number of scenarios we had issues in before, it also manages to boost speed on benchmarks my large amounts on these specific gpus." * 'drm-fixes' of git:// drm/edid: Make the header fixup threshold tunable drm/radeon: fix regression in UMS CS ioctl drm/vmwgfx: Fix nasty write past alloced memory area drm/ttm: Fix spinlock imbalance drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4) drm/radeon: fix HD6790, HD6570 backend programming drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlock drm/radeon: fix bank information in tiling config drm/mgag200: kick off conflicting framebuffers earlier. drm/cirrus: kick out conflicting framebuffers earlier cirrus: avoid crash if driver fails to load
2012-06-01Merge tag 'sound-3.5' of ↵Linus Torvalds-12/+29
git:// Pull sound fixes from Takashi Iwai: "Just a few trivial driver-specific fixes." * tag 'sound-3.5' of git:// ALSA: hdspm - Work around broken DDS value on PCI RME MADI ALSA: usb-audio: fix rate_list memory leak ASoC: fsi: bugfix: ensure dma is terminated ASoC: fsi: bugfix: correct dma area ASoC: fsi: bugfix: enable master clock control on DMA stream ASoC: imx-ssi: Use clk_prepare_enable/clk_disable_unprepare
2012-06-01x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32H.J. Lu-6/+0
When I added x32 ptrace to 3.4 kernel, I also include PTRACE_ARCH_PRCTL support for x32 GDB For ARCH_GET_FS/GS, it takes a pointer to int64. But at user level, ARCH_GET_FS/GS takes a pointer to int32. So I have to add x32 ptrace to glibc to handle it with a temporary int64 passed to kernel and copy it back to GDB as int32. Roland suggested that PTRACE_ARCH_PRCTL is obsolete and x32 GDB should use fs_base and gs_base fields of user_regs_struct instead. Accordingly, remove PTRACE_ARCH_PRCTL completely from the x32 code to avoid possible memory overrun when pointer to int32 is passed to kernel. Link: Signed-off-by: H. Peter Anvin <> Cc: <> v3.4
2012-06-01mtd: mxc_nand: move ecc strengh setup before nand_scan_tailSascha Hauer-6/+6
Since commit 6a918bade9dab40aaef80559bd1169c69e8d69cb, the mxc_nand driver fails with: Driver must set ecc.strength when using hardware ECC This is because nand_scan_tail checks for correct ecc strength settings, so we must set them up before nand_scan_tail. Signed-off-by: Sascha Hauer <> Cc: [3.4+] Signed-off-by: Artem Bityutskiy <> Signed-off-by: David Woodhouse <>
2012-06-01mtd: block2mtd: fix recursive call of mtd_writevGabor Juhos-1/+0
The 'mtd_writev' interface calls the function assigned to the '_write' field of a given mtd device if that is not NULL. The block2mtd driver sets the '_writev' field to the 'mtd_writev' function itself and thus causes a endless loop. This is caused by 1dbebd32562b3c2caeca35960e5cb00bfcc12900 (mtd: harmonize mtd_writev usage). Remove the assignment from the block2mtd driver to fix the issue. Signed-off-by: Gabor Juhos <> Cc: [3.3+] Signed-off-by: Artem Bityutskiy <> Signed-off-by: David Woodhouse <>
2012-06-01mtd: gpmi-nand: define ecc.strengthMarek Vasut-0/+5
Fix an issue which was introduced by the recent addition of ecc.strength. The ecc.strength wasn't set in gpmi-nand, resulting in the following crash: [ 2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347! ... [ 2.550000] [<c020841c>] (nand_scan_tail+0x328/0x650) from [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) [ 2.550000] [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) from [<c01f6618>] (platform_drv_probe+0x14/0x18) [ 2.550000] [<c01f6618>] (platform_drv_probe+0x14/0x18) from [<c01f55b0>] (driver_probe_device+0x74/0x1fc) [ 2.550000] [<c01f55b0>] (driver_probe_device+0x74/0x1fc) from [<c01f57cc>] (__driver_attach+0x94/0x98) [ 2.550000] [<c01f57cc>] (__driver_attach+0x94/0x98) from [<c01f3d40>] (bus_for_each_dev+0x50/0x80) [ 2.550000] [<c01f3d40>] (bus_for_each_dev+0x50/0x80) from [<c01f4e18>] (bus_add_driver+0x188/0x25c) [ 2.550000] [<c01f4e18>] (bus_add_driver+0x188/0x25c) from [<c01f5a70>] (driver_register+0x78/0x138) [ 2.550000] [<c01f5a70>] (driver_register+0x78/0x138) from [<c043dc7c>] (gpmi_nand_init+0xc/0x30) [ 2.550000] [<c043dc7c>] (gpmi_nand_init+0xc/0x30) from [<c0008824>] (do_one_initcall+0x108/0x17c) [ 2.550000] [<c0008824>] (do_one_initcall+0x108/0x17c) from [<c042a8b8>] (kernel_init+0xfc/0x1bc) [ 2.550000] [<c042a8b8>] (kernel_init+0xfc/0x1bc) from [<c000fab4>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Marek Vasut <> Signed-off-by: Artem Bityutskiy <> Signed-off-by: David Woodhouse <>
2012-06-01apple-gmux: Fix up the suspend/resume patchMatthew Garrett-1/+1
I incorporated the wrong version of the suspend/resume patch for gmux, and so lost David Woodhouse's fix to leave the backlight level unchanged over suspend/resume. This fixes it up to v2. Signed-off-by: Matthew Garrett <>
2012-06-01mtd: of_parts: fix breakage in KconfigFrank Svendsboe-1/+1
MTD_OF_PARTS and the default setting is not working due to using 'Y' instead of 'y', introduced in commit d6137badeff1ef64b4e0092ec249ebdeaeb3ff37. This made our board, and possibly other boards using DTS defined partitions and not having CONFIG_MTD_OF_PARTS=y defined in the defconfig, fail to mount root. Signed-off-by: Frank Svendsboe <> Cc: [3.2+] Signed-off-by: Artem Bityutskiy <> Signed-off-by: David Woodhouse <>
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds-1091/+482
git:// Pull third pile of signal handling patches from Al Viro: "This time it's mostly helpers and conversions to them; there's a lot of stuff remaining in the tree, but that'll either go in -rc2 (isolated bug fixes, ideally via arch maintainers' trees) or will sit there until the next cycle." * 'for-linus' of git:// x86: get rid of calling do_notify_resume() when returning to kernel mode blackfin: check __get_user() return value whack-a-mole with TIF_FREEZE FRV: Optimise the system call exit path in entry.S [ver #2] FRV: Shrink TIF_WORK_MASK [ver #2] FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions new helper: signal_delivered() powerpc: get rid of restore_sigmask() most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set set_restore_sigmask() is never called without SIGPENDING (and never should be) TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set don't call try_to_freeze() from do_signal() pull clearing RESTORE_SIGMASK into block_sigmask() sh64: failure to build sigframe != signal without handler openrisc: tracehook_signal_handler() is supposed to be called on success new helper: sigmask_to_save() new helper: restore_saved_sigmask() new helpers: {clear,test,test_and_clear}_restore_sigmask() HAVE_RESTORE_SIGMASK is defined on all architectures now
2012-06-01tcp: reflect SYN queue_mapping into SYNACK packetsEric Dumazet-6/+12
While testing how linux behaves on SYNFLOOD attack on multiqueue device (ixgbe), I found that SYNACK messages were dropped at Qdisc level because we send them all on a single queue. Obvious choice is to reflect incoming SYN packet @queue_mapping to SYNACK packet. Under stress, my machine could only send 25.000 SYNACK per second (for 200.000 incoming SYN per second). NIC : ixgbe with 16 rx/tx queues. After patch, not a single SYNACK is dropped. Signed-off-by: Eric Dumazet <> Cc: Hans Schillstrom <> Cc: Jesper Dangaard Brouer <> Cc: Neal Cardwell <> Cc: Tom Herbert <> Signed-off-by: David S. Miller <>
2012-06-01tcp: do not create inetpeer on SYNACK messageEric Dumazet-1/+2
Another problem on SYNFLOOD/DDOS attack is the inetpeer cache getting larger and larger, using lots of memory and cpu time. tcp_v4_send_synack() ->inet_csk_route_req() ->ip_route_output_flow() ->rt_set_nexthop() ->rt_init_metrics() ->inet_getpeer( create = true) This is a side effect of commit a4daad6b09230 (net: Pre-COW metrics for TCP) added in 2.6.39 Possible solution : Instruct inet_csk_route_req() to remove FLOWI_FLAG_PRECOW_METRICS Before patch : # grep peer /proc/slabinfo inet_peer_cache 4175430 4175430 192 42 2 : tunables 0 0 0 : slabdata 99415 99415 0 Samples: 41K of event 'cycles', Event count (approx.): 30716565122 + 20,24% ksoftirqd/0 [kernel.kallsyms] [k] inet_getpeer + 8,19% ksoftirqd/0 [kernel.kallsyms] [k] peer_avl_rebalance.isra.1 + 4,81% ksoftirqd/0 [kernel.kallsyms] [k] sha_transform + 3,64% ksoftirqd/0 [kernel.kallsyms] [k] fib_table_lookup + 2,36% ksoftirqd/0 [ixgbe] [k] ixgbe_poll + 2,16% ksoftirqd/0 [kernel.kallsyms] [k] __ip_route_output_key + 2,11% ksoftirqd/0 [kernel.kallsyms] [k] kernel_map_pages + 2,11% ksoftirqd/0 [kernel.kallsyms] [k] ip_route_input_common + 2,01% ksoftirqd/0 [kernel.kallsyms] [k] __inet_lookup_established + 1,83% ksoftirqd/0 [kernel.kallsyms] [k] md5_transform + 1,75% ksoftirqd/0 [kernel.kallsyms] [k] check_leaf.isra.9 + 1,49% ksoftirqd/0 [kernel.kallsyms] [k] ipt_do_table + 1,46% ksoftirqd/0 [kernel.kallsyms] [k] hrtimer_interrupt + 1,45% ksoftirqd/0 [kernel.kallsyms] [k] kmem_cache_alloc + 1,29% ksoftirqd/0 [kernel.kallsyms] [k] inet_csk_search_req + 1,29% ksoftirqd/0 [kernel.kallsyms] [k] __netif_receive_skb + 1,16% ksoftirqd/0 [kernel.kallsyms] [k] copy_user_generic_string + 1,15% ksoftirqd/0 [kernel.kallsyms] [k] kmem_cache_free + 1,02% ksoftirqd/0 [kernel.kallsyms] [k] tcp_make_synack + 0,93% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_lock_bh + 0,87% ksoftirqd/0 [kernel.kallsyms] [k] __call_rcu + 0,84% ksoftirqd/0 [kernel.kallsyms] [k] rt_garbage_collect + 0,84% ksoftirqd/0 [kernel.kallsyms] [k] fib_rules_lookup Signed-off-by: Eric Dumazet <> Cc: Hans Schillstrom <> Cc: Jesper Dangaard Brouer <> Cc: Neal Cardwell <> Cc: Tom Herbert <> Signed-off-by: David S. Miller <>
2012-06-018139cp/8139too: terminate the eeprom access with the right opmodeJason Wang-2/+2
Currently, we terminate the eeprom access through clearing the CS by: RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr); This would left the eeprom into "Config. Register Write Enable:" state which is not expcted as the highest two bits were set to 0x11 ( expected is the "Normal" mode (0x00)). Solving this by write 0x0 instead of ~EE_CS when terminating the eeprom access. Signed-off-by: Jason Wang <> Signed-off-by: David S. Miller <>
2012-06-018139cp: set ring address before enabling receiverJason Wang-11/+11
Currently, we enable the receiver before setting the ring address which could lead the card DMA into unexpected areas. Solving this by set the ring address before enabling the receiver. btw. I find and test this in qemu as I didn't have a 8139cp card in hand. please review it carefully. Signed-off-by: Jason Wang <> Signed-off-by: David S. Miller <>
2012-06-01cipso: handle CIPSO options correctly when NetLabel is disabledPaul Moore-1/+28
When NetLabel is not enabled, e.g. CONFIG_NETLABEL=n, and the system receives a CIPSO tagged packet it is dropped (cipso_v4_validate() returns non-zero). In most cases this is the correct and desired behavior, however, in the case where we are simply forwarding the traffic, e.g. acting as a network bridge, this becomes a problem. This patch fixes the forwarding problem by providing the basic CIPSO validation code directly in ip_options_compile() without the need for the NetLabel or CIPSO code. The new validation code can not perform any of the CIPSO option label/value verification that cipso_v4_validate() does, but it can verify the basic CIPSO option format. The behavior when NetLabel is enabled is unchanged. Signed-off-by: Paul Moore <> Signed-off-by: David S. Miller <>
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds-1618/+1495
git:// Pull vfs changes from Al Viro. "A lot of misc stuff. The obvious groups: * Miklos' atomic_open series; kills the damn abuse of ->d_revalidate() by NFS, which was the major stumbling block for all work in that area. * ripping security_file_mmap() and dealing with deadlocks in the area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in general. * ->encode_fh() switched to saner API; insane fake dentry in mm/cleancache.c gone. * assorted annotations in fs (endianness, __user) * parts of Artem's ->s_dirty work (jff2 and reiserfs parts) * ->update_time() work from Josef. * other bits and pieces all over the place. Normally it would've been in two or three pull requests, but signal.git stuff had eaten a lot of time during this cycle ;-/" Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the 'truncate_range' inode method was removed by the VM changes, the VFS update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due to sparse fix added twice, with other changes nearby). * 'for-linus' of git:// (95 commits) nfs: don't open in ->d_revalidate vfs: retry last component if opening stale dentry vfs: nameidata_to_filp(): don't throw away file on error vfs: nameidata_to_filp(): inline __dentry_open() vfs: do_dentry_open(): don't put filp vfs: split __dentry_open() vfs: do_last() common post lookup vfs: do_last(): add audit_inode before open vfs: do_last(): only return EISDIR for O_CREAT vfs: do_last(): check LOOKUP_DIRECTORY vfs: do_last(): make ENOENT exit RCU safe vfs: make follow_link check RCU safe vfs: do_last(): use inode variable vfs: do_last(): inline walk_component() vfs: do_last(): make exit RCU safe vfs: split do_lookup() Btrfs: move over to use ->update_time fs: introduce inode operation ->update_time reiserfs: get rid of resierfs_sync_super reiserfs: mark the superblock as dirty a bit later ...
2012-06-01Merge tag 'ext4_for_linus' of ↵Linus Torvalds-197/+1784
git:// Pull Ext4 updates from Theodore Ts'o: "The major new feature added in this update is Darrick J Wong's metadata checksum feature, which adds crc32 checksums to ext4's metadata fields. There is also the usual set of cleanups and bug fixes." * tag 'ext4_for_linus' of git:// (44 commits) ext4: hole-punch use truncate_pagecache_range jbd2: use kmem_cache_zalloc wrapper instead of flag ext4: remove mb_groups before tearing down the buddy_cache ext4: add ext4_mb_unload_buddy in the error path ext4: don't trash state flags in EXT4_IOC_SETFLAGS ext4: let getattr report the right blocks in delalloc+bigalloc ext4: add missing save_error_info() to ext4_error() ext4: add debugging trigger for ext4_error() ext4: protect group inode free counting with group lock ext4: use consistent ssize_t type in ext4_file_write() ext4: fix format flag in ext4_ext_binsearch_idx() ext4: cleanup in ext4_discard_allocated_blocks() ext4: return ENOMEM when mounts fail due to lack of memory ext4: remove redundundant "(char *) bh->b_data" casts ext4: disallow hard-linked directory in ext4_lookup ext4: fix potential integer overflow in alloc_flex_gd() ext4: remove needs_recovery in ext4_mb_init() ext4: force ro mount if ext4_setup_super() fails ext4: fix potential NULL dereference in ext4_free_inodes_counts() ext4/jbd2: add metadata checksumming to the list of supported features ...
2012-06-01x86: get rid of calling do_notify_resume() when returning to kernel modeAl Viro-13/+10
If we end up calling do_notify_resume() with !user_mode(refs), it does nothing (do_signal() explicitly bails out and we can't get there with TIF_NOTIFY_RESUME in such situations). Then we jump to resume_userspace_sig, which rechecks the same thing and bails out to resume_kernel, thus breaking the loop. It's easier and cheaper to check *before* calling do_notify_resume() and bail out to resume_kernel immediately. And kill the check in do_signal()... Note that on amd64 we can't get there with !user_mode() at all - asm glue takes care of that. Acked-and-reviewed-by: Thomas Gleixner <> Signed-off-by: Al Viro <>
2012-06-01blackfin: check __get_user() return valueAl Viro-16/+14
Signed-off-by: Al Viro <>
2012-06-01whack-a-mole with TIF_FREEZEAl Viro-2/+0
blackfin has reintroduced it, completely unused. Signed-off-by: Al Viro <>
2012-06-01FRV: Optimise the system call exit path in entry.S [ver #2]David Howells-6/+7
Optimise the system call exit path in entry.S by packing some instructions. Suggested-by: Al Viro <> Signed-off-by: David Howells <> Signed-off-by: Al Viro <>
2012-06-01FRV: Shrink TIF_WORK_MASK [ver #2]David Howells-13/+15
Shrink TIF_WORK_MASK so that it will fit in the 12-bit signed immediate operand field of an ANDI instruction. Suggested-by: Al Viro <> Signed-off-by: David Howells <> Signed-off-by: Al Viro <>
2012-06-01FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptionsDavid Howells-11/+3
Move the test for kernel mode processing from do_signal() into entry.S to also prevent system call exit tracing and userspace resumption notification handling happening when returning from kernel exceptions. Reported-by: Al Viro <> Signed-off-by: David Howells <> Signed-off-by: Al Viro <>
2012-06-01new helper: signal_delivered()Al Viro-83/+47
Does block_sigmask() + tracehook_signal_handler(); called when sigframe has been successfully built. All architectures converted to it; block_sigmask() itself is gone now (merged into this one). I'm still not too happy with the signature, but that's a separate story (IMO we need a structure that would contain signal number + siginfo + k_sigaction, so that get_signal_to_deliver() would fill one, signal_delivered(), handle_signal() and probably setup...frame() - take one). Signed-off-by: Al Viro <>