AgeCommit message (Collapse)AuthorLines
2015-03-22Linux 4.0-rc5v4.0-rc5Linus Torvalds-1/+1
2015-03-22Merge tag 'md/4.0-rc4-fix' of git:// Torvalds-3/+2
Pull bugfix for md from Neil Brown: "One fix for md in 4.0-rc4 Regression in recent patch causes crash on error path" * tag 'md/4.0-rc4-fix' of git:// md: fix problems with freeing private data after ->run failure.
2015-03-22Merge tag 'driver-core-4.0-rc5' of ↵Linus Torvalds-0/+4
git:// Pull driver core fixes from Greg KH: "Here are two bugfixes for things reported. One regression in kernfs, and another issue fixed in the LZ4 code that was fixed in the "upstream" codebase that solves a reported kernel crash Both have been in linux-next for a while" * tag 'driver-core-4.0-rc5' of git:// LZ4 : fix the data abort issue kernfs: handle poll correctly on 'direct_read' files.
2015-03-22Merge tag 'char-misc-4.0-rc5' of ↵Linus Torvalds-183/+3
git:// Pull char/misc fixes from Greg KH: "Here are three fixes for 4.0-rc5 that revert 3 PCMCIA patches that were merged in 4.0-rc1 that cause regressions. So let's revert them for now and they will be reworked and resent sometime in the future. All have been tested in linux-next for a while" * tag 'char-misc-4.0-rc5' of git:// Revert "pcmcia: add a new resource manager for non ISA systems" Revert "pcmcia: fix incorrect bracketing on a test" Revert "pcmcia: add missing include for new pci resource handler"
2015-03-22Merge tag 'staging-4.0-rc5' of ↵Linus Torvalds-17/+17
git:// Pull staging driver fixes from Greg KH: "Here are four small staging driver fixes, all for the vt6656 and vt6655 drivers, that resolve some reported issues with them. All of these patches have been in linux next for a while" * tag 'staging-4.0-rc5' of git:// vt6655: Fix late setting of byRFType. vt6655: RFbSetPower fix missing rate RATE_12M staging: vt6656: vnt_rf_setpower: fix missing rate RATE_12M staging: vt6655: vnt_tx_packet fix dma_idx selection.
2015-03-22Merge tag 'tty-4.0-rc5' of ↵Linus Torvalds-3/+12
git:// Pull tty/serial driver fix from Greg KH: "Here's a single 8250 serial driver that fixes a reported deadlock with the serial console and the tty driver. It's been in linux-next for a while now" * tag 'tty-4.0-rc5' of git:// serial: 8250_dw: Fix deadlock in LCR workaround
2015-03-22Merge tag 'usb-4.0-rc5' of ↵Linus Torvalds-719/+131
git:// Pull USB / PHY driver fixes from Greg KH: "Here's a number of USB and PHY driver fixes for 4.0-rc5. The largest thing here is a revert of a gadget function driver patch that removes 500 lines of code. Other than that, it's a number of reported bugs fixes and new quirk/id entries. All have been in linux-next for a while" * tag 'usb-4.0-rc5' of git:// (33 commits) usb: common: otg-fsm: only signal connect after switching to peripheral uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices USB: ehci-atmel: rework clk handling MAINTAINERS: add entry for USB OTG FSM usb: chipidea: otg: add a_alt_hnp_support response for B device phy: omap-usb2: Fix missing clk_prepare call when using old dt name phy: ti/omap: Fix modalias phy: core: Fixup return value of phy_exit when !pm_runtime_enabled phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizof phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeof phy: twl4030-usb: Remove redundant assignment for twl->linkstat phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0] phy: Find the right match in devm_phy_destroy() phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure path phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementation phy: samsung-usb2: Remove NULL terminating entry from phys array phy: hix5hd2-sata: Check return value of platform_get_resource phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol function Revert "usb: gadget: zero: Add support for interrupt EP" Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'" ...
2015-03-21Merge branch 'fixes' of git:// Torvalds-80/+137
Pull slave dmaengine fixes from Vinod Koul: "Four fixes for dw, pl08x, imx-sdma and at_hdmac driver. Nothing unusual here, simple fixes to these drivers" * 'fixes' of git:// dmaengine: pl08x: Define capabilities for generic capabilities reporting dmaengine: dw: append MODULE_ALIAS for platform driver dmaengine: imx-sdma: switch to dynamic context mode after script loaded dmaengine: at_hdmac: Fix calculation of the residual bytes
2015-03-21Merge tag 'pm+acpi-4.0-rc5' of ↵Linus Torvalds-54/+78
git:// Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes for recent regressions (PCI/ACPI resources and at91 RTC locking), a stable-candidate powercap RAPL driver fix and two ARM cpuidle fixes (one stable-candidate too). Specifics: - Revert a recent PCI commit related to IRQ resources management that introduced a regression for drivers attempting to bind to devices whose previous drivers did not balance pci_enable_device() and pci_disable_device() as expected (Rafael J Wysocki). - Fix a deadlock in at91_rtc_interrupt() introduced by a typo in a recent commit related to wakeup interrupt handling (Dan Carpenter). - Allow the power capping RAPL (Running-Average Power Limit) driver to use different energy units for domains within one CPU package which is necessary to handle Intel Haswell EP processors correctly (Jacob Pan). - Improve the cpuidle mvebu driver's handling of Armada XP SoCs by updating the target residency and exit latency numbers for those chips (Sebastien Rannou). - Prevent the cpuidle mvebu driver from calling cpu_pm_enter() twice in a row before cpu_pm_exit() is called on the same CPU which breaks the core's assumptions regarding the usage of those functions (Gregory Clement)" * tag 'pm+acpi-4.0-rc5' of git:// Revert "x86/PCI: Refine the way to release PCI IRQ resources" rtc: at91rm9200: double locking bug in at91_rtc_interrupt() powercap / RAPL: handle domains with different energy units cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs cpuidle: mvebu: Fix the CPU PM notifier usage
2015-03-21Merge git:// Torvalds-372/+159
Pull drm updates from Dave Airlie: "A bunch of fixes across drivers: radeon: disable two ended allocation for now, it breaks some stuff amdkfd: misc fixes nouveau: fix irq loop problem, add basic support for GM206 (new hw) i915: fix some WARNs people were seeing exynos: fix some iommu interactions causing boot failures" * git:// drm/radeon: drop ttm two ended allocation drm/exynos: fix the initialization order in FIMD drm/exynos: fix typo config name correctly. drm/exynos: Check for NULL dereference of crtc drm/exynos: IS_ERR() vs NULL bug drm/exynos: remove unused files drm/i915: Make sure the primary plane is enabled before reading out the fb state drm/nouveau/bios: fix i2c table parsing for dcb 4.1 drm/nouveau/device/gm100: Basic GM206 bring up (as copy of GM204) drm/nouveau/device: post write to NV_PMC_BOOT_1 when flipping endian switch drm/nouveau/gr/gf100: fix some accidental or'ing of buffer addresses drm/nouveau/fifo/nv04: remove the loop from the interrupt handler drm/radeon: Changing number of compute pipe lines drm/amdkfd: Fix SDMA queue init. in non-HWS mode drm/amdkfd: destroy mqd when destroying kernel queue drm/i915: Ensure plane->state->fb stays in sync with plane->fb
2015-03-21Merge tag 'devicetree-fixes-for-4.0-part2' of ↵Linus Torvalds-12/+14
git:// Pull more DeviceTree fixes vfom Rob Herring: - revert setting stdout-path as preferred console. This caused regressions in PowerMACs and other systems. - yet another fix for stdout-path option parsing. - fix error path handling in of_irq_parse_one * tag 'devicetree-fixes-for-4.0-part2' of git:// Revert "of: Fix premature bootconsole disable with 'stdout-path'" of: handle both '/' and ':' in path strings of: unittest: Add option string test case with longer path of/irq: Fix of_irq_parse_one() returned error codes
2015-03-21Merge git:// Torvalds-47/+61
Pull SCSI target fixes from Nicholas Bellinger: "Here are current target-pending fixes for v4.0-rc5 code that have made their way into the queue over the last weeks. The fixes this round include: - Fix long-standing iser-target logout bug related to early conn_logout_comp completion, resulting in iscsi_conn use-after-tree OOpsen. (Sagi + nab) - Fix long-standing tcm_fc bug in ft_invl_hw_context() failure handing for DDP hw offload. (DanC) - Fix incorrect use of unprotected __transport_register_session() in tcm_qla2xxx + other single local se_node_acl fabrics. (Bart) - Fix reference leak in target_submit_cmd() -> target_get_sess_cmd() for ack_kref=1 failure path. (Bart) - Fix pSCSI backend ->get_device_type() statistics OOPs with un-configured device. (Olaf + nab) - Fix virtual LUN=0 target_configure_device failure OOPs at modprobe time. (Claudio + nab) - Fix FUA write false positive failure regression in v4.0-rc1 code. (Christophe Vu-Brugier + HCH)" * git:// target: do not reject FUA CDBs when write cache is enabled but emulate_write_cache is 0 target: Fix virtual LUN=0 target_configure_device failure OOPs target/pscsi: Fix NULL pointer dereference in get_device_type tcm_fc: missing curly braces in ft_invl_hw_context() target: Fix reference leak in target_get_sess_cmd() error path loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_session tcm_qla2xxx: Fix incorrect use of __transport_register_session iscsi-target: Avoid early conn_logout_comp for iser connections Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target" target: Disallow changing of WRITE cache/FUA attrs after export
2015-03-21Merge tag 'dm-4.0-fixes' of ↵Linus Torvalds-26/+142
git:// Pull devicemapper fixes from Mike Snitzer: "A handful of stable fixes for DM: - fix thin target to always zero-fill reads to unprovisioned blocks - fix to interlock device destruction's suspend from internal suspends - fix 2 snapshot exception store handover bugs - fix dm-io to cope with DISCARD and WRITE_SAME capabilities changing" * tag 'dm-4.0-fixes' of git:// dm io: deal with wandering queue limits when handling REQ_DISCARD and REQ_WRITE_SAME dm snapshot: suspend merging snapshot when doing exception handover dm snapshot: suspend origin when doing exception handover dm: hold suspend_lock while suspending device during device deletion dm thin: fix to consistently zero-fill reads to unprovisioned blocks
2015-03-21Merge branch 'for-linus' of ↵Linus Torvalds-46/+352
git:// Pull btrfs fixes from Chris Mason: "Most of these are fixing extent reservation accounting, or corners with tree writeback during commit. Josef's set does add a test, which isn't strictly a fix, but it'll keep us from making this same mistake again" * 'for-linus' of git:// Btrfs: fix outstanding_extents accounting in DIO Btrfs: add sanity test for outstanding_extents accounting Btrfs: just free dummy extent buffers Btrfs: account merges/splits properly Btrfs: prepare block group cache before writing Btrfs: fix ASSERT(list_empty(&cur_trans->dirty_bgs_list) Btrfs: account for the correct number of extents for delalloc reservations Btrfs: fix merge delalloc logic Btrfs: fix comp_oper to get right order Btrfs: catch transaction abortion after waiting for it btrfs: fix sizeof format specifier in btrfs_check_super_valid()
2015-03-21Merge branch 'for-4.0' of git:// Torvalds-2/+0
Pull nfsd bufix from Bruce Fields: "This is a fix for a crash easily triggered by 4.1 activity to a server built with CONFIG_NFSD_PNFS. There are some more bugfixes queued up that I intend to pass along next week, but this is the most critical" * 'for-4.0' of git:// Subject: nfsd: don't recursively call nfsd4_cb_layout_fail
2015-03-21Merge tag 'upstream-4.0-rc5' of git:// Torvalds-1/+2
Pull UBI fix from Artem Bityutskiy: "This fixes a bug introduced during the v4.0 merge window where we forgot to put braces where they should be" * tag 'upstream-4.0-rc5' of git:// UBI: fix missing brace control flow
2015-03-21Merge tag 'arm64-fixes' of ↵Linus Torvalds-5/+19
git:// Pull arm64 fixes from Catalin Marinas: - mm switching fix where the kernel pgd ends up in the user TTBR0 after returning from an EFI run-time services call - fix __GFP_ZERO handling for atomic pool and CMA DMA allocations (the generic code does get the gfp flags, so it's left with the arch code to memzero accordingly) * tag 'arm64-fixes' of git:// arm64: Honor __GFP_ZERO in dma allocations arm64: efi: don't restore TTBR0 if active_mm points at init_mm
2015-03-21Merge branch 'fixes' of git:// Torvalds-23/+23
Pull ARM fixes from Russell King: "Another few ARM fixes. Fabrice fixed the L2 cache DT parsing to allow prefetch configuration to be specified even when the cache size parsing fails. Laura noticed that the setting of page attributes wasn't working for modules due to is_module_addr() always returning false. Marc Gonzalez (aka Mason) noticed a potential latent bug with the way we read one of the CPUID registers (where we could attempt to read a non-present CPUID register which may fault.) I've fixed an issue where 32-bit DMA masks were failing with memory which extended to the top of physical address space, and I've also added debugging output of the page tables when we hit a data access exception which we don't specifically handle - prompted by the lack of information in a bug report" * 'fixes' of git:// ARM: 8313/1: Use read_cpuid_ext() macro instead of inline asm ARM: 8311/1: Don't use is_module_addr in setting page attributes ARM: 8310/1: l2c: Fix prefetch settings dt parsing ARM: dump pgd, pmd and pte states on unhandled data abort faults ARM: dma-api: fix off-by-one error in __dma_supported()
2015-03-21Merge branches 'pm-cpuidle', 'powercap', 'irq-pm' and 'acpi-resources'Rafael J. Wysocki-1509/+2867
* pm-cpuidle: cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs cpuidle: mvebu: Fix the CPU PM notifier usage * powercap: powercap / RAPL: handle domains with different energy units * irq-pm: rtc: at91rm9200: double locking bug in at91_rtc_interrupt() * acpi-resources: Revert "x86/PCI: Refine the way to release PCI IRQ resources"
2015-03-21md: fix problems with freeing private data after ->run failure.NeilBrown-3/+2
If ->run() fails, it can either free the data structures it allocated, or leave that task to ->free() which will be called on failures. However: md.c calls ->free() even if ->private_data is NULL, which causes problems in some personalities. raid0.c frees the data, but doesn't clear ->private_data, which will become a problem when we fix md.c So better fix both these issues at once. Reported-by: Richard W.M. Jones <> Fixes: 5aa61f427e4979be733e4847b9199ff9cc48a47e URL: Signed-off-by: NeilBrown <>
2015-03-20arm64: Honor __GFP_ZERO in dma allocationsSuzuki K. Poulose-3/+9
Current implementation doesn't zero out the pages allocated. Honor the __GFP_ZERO flag and zero out if set. Cc: <> # v3.14+ Acked-by: Will Deacon <> Signed-off-by: Suzuki K. Poulose <> Signed-off-by: Catalin Marinas <>
2015-03-20arm64: efi: don't restore TTBR0 if active_mm points at init_mmWill Deacon-2/+10
init_mm isn't a normal mm: it has swapper_pg_dir as its pgd (which contains kernel mappings) and is used as the active_mm for the idle thread. When restoring the pgd after an EFI call, we write current->active_mm into TTBR0. If the current task is actually the idle thread (e.g. when initialising the EFI RTC before entering userspace), then the TLB can erroneously populate itself with junk global entries as a result of speculative table walks. When we do eventually return to userspace, the task can end up hitting these junk mappings leading to lockups, corruption or crashes. This patch fixes the problem in the same way as the CPU suspend code by ensuring that we never switch to the init_mm in efi_set_pgd and instead point TTBR0 at the zero page. A check is also added to cpu_switch_mm to BUG if we get passed swapper_pg_dir. Reviewed-by: Ard Biesheuvel <> Fixes: f3cdfd239da5 ("arm64/efi: move SetVirtualAddressMap() to UEFI stub") Signed-off-by: Will Deacon <> Signed-off-by: Catalin Marinas <>
2015-03-20Revert "x86/PCI: Refine the way to release PCI IRQ resources"Rafael J. Wysocki-32/+32
Commit b4b55cda5874 (Refine the way to release PCI IRQ resources) introduced a regression in the PCI IRQ resource management by causing the IRQ resource of a device, established when pci_enabled_device() is called on a fully disabled device, to be released when the driver is unbound from the device, regardless of the enable_cnt. This leads to the situation that an ill-behaved driver can now make a device unusable to subsequent drivers by an imbalance in their use of pci_enable/disable_device(). That is a serious problem for secondary drivers like vfio-pci, which are innocent of the transgressions of the previous driver. Since the solution of this problem is not immediate and requires further discussion, revert commit b4b55cda5874 and the issue it was supposed to address (a bug related to xen-pciback) will be taken care of in a different way going forward. Reported-by: Alex Williamson <> Signed-off-by: Rafael J. Wysocki <>
2015-03-20Merge tag 'drm-intel-fixes-2015-03-19' of ↵Dave Airlie-4/+28
git:// into drm-fixes Backporting a couple of plane related fixes from drm-next to v4.0. * tag 'drm-intel-fixes-2015-03-19' of git:// drm/i915: Make sure the primary plane is enabled before reading out the fb state drm/i915: Ensure plane->state->fb stays in sync with plane->fb
2015-03-20Merge tag 'drm-amdkfd-fixes-2015-03-19' of ↵Dave Airlie-11/+23
git:// into drm-fixes - Fixing SDMA initialization when in non-HWS mode (debug mode) - Memory leak fix when destroying kernel queue - Fix number of available compute pipelines according to new firmware * tag 'drm-amdkfd-fixes-2015-03-19' of git:// drm/radeon: Changing number of compute pipe lines drm/amdkfd: Fix SDMA queue init. in non-HWS mode drm/amdkfd: destroy mqd when destroying kernel queue
2015-03-19target: do not reject FUA CDBs when write cache is enabled but ↵Christophe Vu-Brugier-18/+17
emulate_write_cache is 0 A check that rejects a CDB with FUA bit set if no write cache is emulated was added by the following commit: fde9f50 target: Add sanity checks for DPO/FUA bit usage The condition is as follows: if (!dev->dev_attrib.emulate_fua_write || !dev->dev_attrib.emulate_write_cache) However, this check is wrong if the backend device supports WCE but "emulate_write_cache" is disabled. This patch uses se_dev_check_wce() (previously named spc_check_dev_wce) to invoke transport->get_write_cache() if the device has a write cache or check the "emulate_write_cache" attribute otherwise. Reported-by: Christoph Hellwig <> Signed-off-by: Christophe Vu-Brugier <> Signed-off-by: Nicholas Bellinger <>
2015-03-19target: Fix virtual LUN=0 target_configure_device failure OOPsNicholas Bellinger-2/+2
This patch fixes a NULL pointer dereference triggered by a late target_configure_device() -> alloc_workqueue() failure that results in target_free_device() being called with DF_CONFIGURED already set, which subsequently OOPses in destroy_workqueue() code. Currently this only happens at modprobe target_core_mod time when core_dev_setup_virtual_lun0() -> target_configure_device() fails, and the explicit target_free_device() gets called. To address this bug originally introduced by commit 0fd97ccf45, go ahead and move DF_CONFIGURED to end of target_configure_device() code to handle this special failure case. Reported-by: Claudio Fleiner <> Cc: Claudio Fleiner <> Cc: Christoph Hellwig <> Cc: <> # v3.7+ Signed-off-by: Nicholas Bellinger <>
2015-03-19target/pscsi: Fix NULL pointer dereference in get_device_typeNicholas Bellinger-1/+1
This patch fixes a NULL pointer dereference OOPs with pSCSI backends within target_core_stat.c code. The bug is caused by a configfs attr read if no pscsi_dev_virt->pdv_sd has been configured. Reported-by: Olaf Hering <> Cc: <> Signed-off-by: Nicholas Bellinger <>
2015-03-19tcm_fc: missing curly braces in ft_invl_hw_context()Dan Carpenter-1/+2
This patch adds a missing set of conditional check braces in ft_invl_hw_context() originally introduced by commit dcd998ccd when handling DDP failures in ft_recv_write_data() code. commit dcd998ccdbf74a7d8fe0f0a44e85da1ed5975946 Author: Kiran Patil <> Date: Wed Aug 3 09:20:01 2011 +0000 tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data Signed-off-by: Dan Carpenter <> Cc: Kiran Patil <> Cc: <> # 3.1+ Signed-off-by: Nicholas Bellinger <>
2015-03-19target: Fix reference leak in target_get_sess_cmd() error pathBart Van Assche-0/+4
This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down is true within target_get_sess_cmd() submission path code. This se_cmd reference leak can occur during active session shutdown when ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers. Signed-off-by: Bart Van Assche <> Cc: <> # 3.6+ Signed-off-by: Nicholas Bellinger <>
2015-03-19loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_sessionBart Van Assche-16/+8
This patch changes loopback, usb-gadget, vhost-scsi and xen-scsiback fabric code to invoke transport_register_session() instead of the unprotected flavour, to ensure se_tpg->session_lock is taken when adding new session list nodes to se_tpg->tpg_sess_list. Note that since these four fabric drivers already hold their own internal TPG mutexes when accessing se_tpg->tpg_sess_list, and consist of a single se_session created through configfs attribute access, no list corruption can currently occur. So for correctness sake, go ahead and use the se_tpg->session_lock protected version for these four fabric drivers. Signed-off-by: Bart Van Assche <> Signed-off-by: Nicholas Bellinger <>
2015-03-19tcm_qla2xxx: Fix incorrect use of __transport_register_sessionBart Van Assche-1/+1
This patch fixes the incorrect use of __transport_register_session() in tcm_qla2xxx_check_initiator_node_acl() code, that does not perform explicit se_tpg->session_lock when accessing se_tpg->tpg_sess_list to add new se_sess nodes. Given that tcm_qla2xxx_check_initiator_node_acl() is not called with qla_hw->hardware_lock held for all accesses of ->tpg_sess_list, the code should be using transport_register_session() instead. Signed-off-by: Bart Van Assche <> Cc: Giridhar Malavali <> Cc: Quinn Tran <> Cc: <> # 3.5+ Signed-off-by: Nicholas Bellinger <>
2015-03-19iscsi-target: Avoid early conn_logout_comp for iser connectionsNicholas Bellinger-4/+10
This patch fixes a iser specific logout bug where early complete() of conn->conn_logout_comp in iscsit_close_connection() was causing isert_wait4logout() to complete too soon, triggering a use after free NULL pointer dereference of iscsi_conn memory. The complete() was originally added for traditional iscsi-target when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given iser-target does not wait in logout failure, this special case needs to be avoided. Reported-by: Sagi Grimberg <> Cc: Sagi Grimberg <> Cc: Slava Shwartsman <> Cc: <> # v3.10+ Signed-off-by: Nicholas Bellinger <>
2015-03-19Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target"Nicholas Bellinger-3/+1
This reverts commit 72859d91d93319c00a18c29f577e56bf73a8654a. The original patch was wrong, iscsit_close_connection() still needs to release iscsi_conn during both normal + exception IN_LOGOUT status with ib_isert enabled. The original OOPs is due to completing conn_logout_comp early within iscsit_close_connection(), causing isert_wait4logout() to complete instead of waiting for iscsit_logout_post_handler_*() to be called. Reported-by: Sagi Grimberg <> Cc: Sagi Grimberg <> Cc: Slava Shwartsman <> Signed-off-by: Nicholas Bellinger <>
2015-03-19target: Disallow changing of WRITE cache/FUA attrs after exportNicholas Bellinger-1/+15
Now that incoming FUA=1 bit check is enforced for backends with FUA or WCE disabled, go ahead and disallow the changing of related backend attributes when active fabric exports exist. This is required to avoid potential failures with existing initiator LUN registrations that have been previously created with FUA=1. Reported-by: Christoph Hellwig <> Cc: Doug Gilbert <> Cc: James Bottomley <> Cc: Ronnie Sahlberg <> Signed-off-by: Nicholas Bellinger <>
2015-03-19Merge branch 'for-linus' of ↵Linus Torvalds-55/+185
git:// Pull input updates from Dmitry Torokhov: "An update to Synaptics driver that makes it usable with the 2015 lineup from Lenovo" * 'for-linus' of git:// Revert "Input: synaptics - use dmax in input_mt_assign_slots" Input: synaptics - remove X250 from the topbuttonpad list Input: synaptics - remove X1 Carbon 3rd gen from the topbuttonpad list Input: synaptics - re-route tracksticks buttons on the Lenovo 2015 series Input: synaptics - remove TOPBUTTONPAD property for Lenovos 2015 Input: synaptics - retrieve the extended capabilities in query $10 Input: synaptics - do not retrieve the board id on old firmwares Input: synaptics - handle spurious release of trackstick buttons Input: synaptics - fix middle button on Lenovo 2015 products Input: synaptics - skip quirks when post-2013 dimensions Input: synaptics - support min/max board id in min_max_pnpid_table Input: synaptics - remove obsolete min/max quirk for X240 Input: synaptics - query min dimensions for fw v8.1 Input: synaptics - log queried and quirked dimension values Input: synaptics - split synaptics_resolution(), query first
2015-03-19Merge branch 'for-linus' of ↵Linus Torvalds-2/+17
git:// Pull fuse fixes from Miklos Szeredi: "This fixes bugs in zero-copy splice to the fuse device" * 'for-linus' of git:// fuse: explicitly set /dev/fuse file's private_data fuse: set stolen page uptodate fuse: notify: don't move pages
2015-03-19Merge branch 'overlayfs-next' of ↵Linus Torvalds-6/+27
git:// Pull overlayfs fixes from Miklos Szeredi: "This fixes minor issues with the multi-layer update in v4.0" * 'overlayfs-next' of git:// ovl: upper fs should not be R/O ovl: check lowerdir amount for non-upper mount ovl: print error message for invalid mount options
2015-03-19Merge tag 'mmc-v4.0-rc4' of git:// Torvalds-1/+1
Pull MMC fix from Ulf Hansson: "MMC core: fix error path in mmc_pwrseq_simple_alloc()" * tag 'mmc-v4.0-rc4' of git:// mmc: pwrseq_simple: fix error path in mmc_pwrseq_simple_alloc
2015-03-19Merge tag 'pinctrl-v4.0-2' of ↵Linus Torvalds-81/+216
git:// Pull pin control fixes from Linus Walleij: "Here is a slew of pin control fixes I've accumulated for the v4.0 kernel. Nothing special, just driver fixes (mainly embedded Intel it seems) and a misunderstanding regarding the stub functions was reverted: - Fix up consumer return values on pin control stubs. - Four patches fixing up the interrupt handling and sleep context save in the Baytrail driver. - Make default output directions work properly in the Cherryview driver. - Fix interrupt locking in the AT91 driver. - Fix setting interrupt generating lines as input in the sunxi driver" * tag 'pinctrl-v4.0-2' of git:// pinctrl: sun4i: GPIOs configured as irq must be set to input before reading pinctrl: at91: move lock/unlock_as_irq calls into request/release pinctrl: update direction_output function of cherryview driver pinctrl: baytrail: Save pin context over system sleep pinctrl: baytrail: Rework interrupt handling pinctrl: baytrail: Clear interrupt triggering from pins that are in GPIO mode pinctrl: baytrail: Relax GPIO request rules Revert "pinctrl: consumer: use correct retval for placeholder functions"
2015-03-19Merge tag 'nios2-fixes-v4.0-rc5' of ↵Linus Torvalds-7/+0
git:// Pull two arch/nios2 fixes from Ley Foon Tan: - Remove ucontext.h from exported arch headers - nios2: mm: do not invoke OOM killer on kernel fault OOM * tag 'nios2-fixes-v4.0-rc5' of git:// nios2: mm: do not invoke OOM killer on kernel fault OOM nios2: Remove ucontext.h from exported arch headers
2015-03-19Merge git:// Torvalds-2/+2
Pull IDE fix from David Miller: "Just one fix to convert a by-hand conversion of jiffies to msecs, from Nicholas McGuire" * git:// ide_tape: convert jiffies with jiffies_to_msecs
2015-03-19Merge git:// Torvalds-53/+41
Pull sparc fixes from David Miller: 1) Some command cases of semtimedop() not even handled due to miscoded comparison on sparc64. From Rob Gardner. 2) Due to two bugs, /proc/kcore wan't working properly on sparc. 3) Make sure fatal traps stop all running cpus, from Dave Kleikamp. * git:// sparc: Fix /proc/kcore sparc: semtimedop() unreachable due to comparison error sparc: io_64.h: Replace io function-link macros sparc64: fatal trap should stop all cpus arch: sparc: kernel: starfire.c: Remove unused function arch: sparc: kernel: traps_64.c: Remove some unused functions
2015-03-19Subject: nfsd: don't recursively call nfsd4_cb_layout_failChristoph Hellwig-2/+0
Due to a merge error when creating c5c707f9 ("nfsd: implement pNFS layout recalls"), we recursively call nfsd4_cb_layout_fail from itself, leading to stack overflows. Signed-off-by: Christoph Hellwig <> Fixes: c5c707f9 ("nfsd: implement pNFS layout recalls") Signed-off-by: J. Bruce Fields <> --- fs/nfsd/nfs4layouts.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfsd/nfs4layouts.c b/fs/nfsd/nfs4layouts.c index 3c1bfa1..1028a06 100644 --- a/fs/nfsd/nfs4layouts.c +++ b/fs/nfsd/nfs4layouts.c @@ -587,8 +587,6 @@ nfsd4_cb_layout_fail(struct nfs4_layout_stateid *ls) rpc_ntop((struct sockaddr *)&clp->cl_addr, addr_str, sizeof(addr_str)); - nfsd4_cb_layout_fail(ls); - printk(KERN_WARNING "nfsd: client %s failed to respond to layout recall. " " Fencing..\n", addr_str); -- 1.9.1
2015-03-19Merge git:// Torvalds-237/+444
Pull networking fixes from David Miller: 1) Fix packet header offset calculation in _decode_session6(), from Hajime Tazaki. 2) Fix route leak in error paths of xfrm_lookup(), from Huaibin Wang. 3) Be sure to clear state properly when scans fail in iwlwifi mvm code, from Luciano Coelho. 4) iwlwifi tries to stop scans that aren't actually running, also from Luciano Coelho. 5) mac80211 should drop mesh frames that are not encrypted, fix from Bob Copeland. 6) Add new device ID to b43 wireless driver for BCM432228 chips, from Rafał Miłecki. 7) Fix accidental addition of members after variable sized array in struct tc_u_hnode, from WANG Cong. 8) Don't re-enable interrupts until after we call napi_complete() in ibmveth and WIZnet drivers, frm Yongbae Park. 9) Fix regression in vlan tag handling of fec driver, from Fugang Duan. 10) If a network namespace change fails during rtnl_newlink(), we don't unwind the device registry properly. 11) Fix two TCP regressions, from Neal Cardwell: - Don't allow snd_cwnd_cnt to accumulate huge values due to missing test in tcp_cong_avoid_ai(). - Restore CUBIC back to advancing cwnd by 1.5x packets per RTT. 12) Fix performance regression in xne-netback involving push TX notifications, from David Vrabel. 13) __skb_tstamp_tx() can be called with a NULL sk pointer, do not dereference blindly. From Willem de Bruijn. 14) Fix potential stack overflow in RDS protocol stack, from Arnd Bergmann. 15) VXLAN_VID_MASK used incorrectly in new remote checksum offload support of VXLAN driver. Fix from Alexey Kodanev. 16) Fix too small netlink SKB allocation in inet_diag layer, from Eric Dumazet. 17) ieee80211_check_combinations() does not count interfaces correctly, from Andrei Otcheretianski. 18) Hardware feature determination in bxn2x driver references a piece of software state that actually isn't initialized yet, fix from Michal Schmidt. 19) inet_csk_wait_for_connect() needs a sched_annotate_sleep() annoation, from Eric Dumazet. * git:// (56 commits) Revert "net: cx82310_eth: use common match macro" net/mlx4_en: Set statistics bitmap at port init IB/mlx4: Saturate RoCE port PMA counters in case of overflow net/mlx4_en: Fix off-by-one in ethtool statistics display IB/mlx4: Verify net device validity on port change event act_bpf: allow non-default TC_ACT opcodes as BPF exec outcome Revert "smc91x: retrieve IRQ and trigger flags in a modern way" inet: Clean up inet_csk_wait_for_connect() vs. might_sleep() ip6_tunnel: fix error code when tunnel exists netdevice.h: fix ndo_bridge_* comments bnx2x: fix encapsulation features on 57710/57711 mac80211: ignore CSA to same channel nl80211: ignore HT/VHT capabilities without QoS/WMM mac80211: ask for ECSA IE to be considered for beacon parse CRC mac80211: count interfaces correctly for combination checks isdn: icn: use strlcpy() when parsing setup options rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg() caif: fix MSG_OOB test in caif_seqpkt_recvmsg() bridge: reset bridge mtu after deleting an interface can: kvaser_usb: Fix tx queue start/stop race conditions ...
2015-03-19fuse: explicitly set /dev/fuse file's private_dataTom Van Braeckel-0/+12
The misc subsystem (which is used for /dev/fuse) initializes private_data to point to the misc device when a driver has registered a custom open file operation, and initializes it to NULL when a custom open file operation has *not* been provided. This subtle quirk is confusing, to the point where kernel code registers *empty* file open operations to have private_data point to the misc device structure. And it leads to bugs, where the addition or removal of a custom open file operation surprisingly changes the initial contents of a file's private_data structure. So to simplify things in the misc subsystem, a patch [1] has been proposed to *always* set the private_data to point to the misc device, instead of only doing this when a custom open file operation has been registered. But before this patch can be applied we need to modify drivers that make the assumption that a misc device file's private_data is initialized to NULL because they didn't register a custom open file operation, so they don't rely on this assumption anymore. FUSE uses private_data to store the fuse_conn and errors out if this is not initialized to NULL at mount time. Hence, we now set a file's private_data to NULL explicitly, to be independent of whatever value the misc subsystem initializes it to by default. [1] Reported-by: Giedrius Statkevicius <> Reported-by: Thierry Reding <> Signed-off-by: Tom Van Braeckel <> Signed-off-by: Miklos Szeredi <>
2015-03-19Revert "of: Fix premature bootconsole disable with 'stdout-path'"Peter Hurley-3/+1
This reverts commit 2fa645cb2703d9b3786d850db815414dfeefa51d. The assumption that at least 1 preferred console will be registered when the stdout-path property is set is invalid, which can result in _no_ consoles. Signed-off-by: Peter Hurley <> Signed-off-by: Rob Herring <>
2015-03-19of: handle both '/' and ':' in path stringsBrian Norris-6/+1
Commit 106937e8ccdc ("of: fix handling of '/' in options for of_find_node_by_path()") caused a regression in OF handling of stdout-path. While it fixes some cases which have '/' after the ':', it breaks cases where there is more than one '/' *before* the ':'. For example, it breaks this boot string stdout-path = "/rdb/serial@f040ab00:115200"; So rather than doing sequentialized checks (first for '/', then for ':'; or vice versa), to get the correct behavior we need to check for the first occurrence of either one of them. It so happens that the handy strcspn() helper can do just that. Fixes: 106937e8ccdc ("of: fix handling of '/' in options for of_find_node_by_path()") Signed-off-by: Brian Norris <> Cc: # 3.19 Acked-by: Leif Lindholm <> Signed-off-by: Rob Herring <>
2015-03-19of: unittest: Add option string test case with longer pathBrian Norris-0/+5
There were regressions seen with commit 106937e8ccdc ("of: fix handling of '/' in options for of_find_node_by_path()"), where we couldn't handle extra '/' before the ':'. Let's test for this now. Confirmed that this test fails without the previous patch and passes when patched. All other tests pass. Signed-off-by: Brian Norris <> Acked-by: Leif Lindholm <> Signed-off-by: Rob Herring <>
2015-03-19of/irq: Fix of_irq_parse_one() returned error codesLaurent Pinchart-3/+7
The error code paths that require cleanup use a goto to jump to the cleanup code and return an error code. However, the error code variable res, which is initialized to -EINVAL when declared, is then overwritten with the return value of of_parse_phandle_with_args(), and reused as the return code from of_irq_parse_one(). This leads to an undetermined error being returned instead of the expected -EINVAL value. Fix it. Signed-off-by: Laurent Pinchart <> Cc: # 3.13+ Signed-off-by: Rob Herring <>