summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2007-05-08Delete unused header file math-emu/extended.hRobert P. J. Day-396/+0
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08schedule obsolete OSS drivers for removal, 4th roundAdrian Bunk-5/+26
Schedule obsolete OSS drivers for removal. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Protect tty drivers list with tty_mutexAlexey Dobriyan-1/+7
Additions and removal from tty_drivers list were just done as well as iterating on it for /proc/tty/drivers generation. testing: modprobe/rmmod loop of simple module which does nothing but tty_register_driver() vs cat /proc/tty/drivers loop BUG: unable to handle kernel paging request at virtual address 6b6b6b6b printing eip: c01cefa7 *pde = 00000000 Oops: 0000 [#1] PREEMPT last sysfs file: devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0/bInterfaceProtocol Modules linked in: ohci_hcd af_packet e1000 ehci_hcd uhci_hcd usbcore xfs CPU: 0 EIP: 0060:[<c01cefa7>] Not tainted VLI EFLAGS: 00010297 (2.6.21-rc4-mm1 #4) EIP is at vsnprintf+0x3a4/0x5fc eax: 6b6b6b6b ebx: f6cb50f2 ecx: 6b6b6b6b edx: fffffffe esi: c0354700 edi: f6cb6000 ebp: 6b6b6b6b esp: f31f5e68 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process cat (pid: 31864, ti=f31f4000 task=c1998030 task.ti=f31f4000) Stack: 00000000 c0103f20 c013003a c0103f20 00000000 f6cb50da 0000000a 00000f0e f6cb50f2 00000010 00000014 ffffffff ffffffff 00000007 c0354753 f6cb50f2 f73e39dc f73e39dc 00000001 c0175416 f31f5ed8 f31f5ed4 0ee00000 f32090bc Call Trace: [<c0103f20>] restore_nocheck+0x12/0x15 [<c013003a>] mark_held_locks+0x6d/0x86 [<c0103f20>] restore_nocheck+0x12/0x15 [<c0175416>] seq_printf+0x2e/0x52 [<c0192895>] show_tty_range+0x35/0x1f3 [<c0175416>] seq_printf+0x2e/0x52 [<c0192add>] show_tty_driver+0x8a/0x1d9 [<c01758f6>] seq_read+0x70/0x2ba [<c0175886>] seq_read+0x0/0x2ba [<c018d8e6>] proc_reg_read+0x63/0x9f [<c015e764>] vfs_read+0x7d/0xb5 [<c018d883>] proc_reg_read+0x0/0x9f [<c015eab1>] sys_read+0x41/0x6a [<c0103e4e>] sysenter_past_esp+0x5f/0x99 ======================= Code: 00 8b 4d 04 e9 44 ff ff ff 8d 4d 04 89 4c 24 50 8b 6d 00 81 fd ff 0f 00 00 b8 a4 c1 35 c0 0f 46 e8 8b 54 24 2c 89 e9 89 c8 eb 06 <80> 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 89 c6 8b 44 24 28 89 EIP: [<c01cefa7>] vsnprintf+0x3a4/0x5fc SS:ESP 0068:f31f5e68 Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Remove do_sync_file_range()Mark Fasheh-14/+9
Remove do_sync_file_range() and convert callers to just use do_sync_mapping_range(). Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: cs5535_gpio, add MODULE_DEVICE_TABLEJiri Slaby-0/+1
cs5535_gpio, add MODULE_DEVICE_TABLE Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ben Gardner <bgardner@wabtec.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: rocket, add MODULE_DEVICE_TABLEJiri Slaby-0/+6
rocket, add MODULE_DEVICE_TABLE Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08move die notifier handling to common codeChristoph Hellwig-328/+162
This patch moves the die notifier handling to common code. Previous various architectures had exactly the same code for it. Note that the new code is compiled unconditionally, this should be understood as an appel to the other architecture maintainer to implement support for it aswell (aka sprinkling a notify_die or two in the proper place) arm had a notifiy_die that did something totally different, I renamed it to arm_notify_die as part of the patch and made it static to the file it's declared and used at. avr32 used to pass slightly less information through this interface and I brought it into line with the other architectures. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix vmalloc_sync_all bustage] [bryan.wu@analog.com: fix vmalloc_sync_all in nommu] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08kprobes: fix sparse NULL warningRandy Dunlap-1/+2
Fix sparse NULL warnings: kernel/kprobes.c:915:49: warning: Using plain integer as NULL pointer Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08reiserfs: proc support requires PROC_FSRandy Dunlap-1/+1
REISER_FS /proc option needs to depend on PROC_FS. fs/reiserfs/procfs.c: In function 'show_super': fs/reiserfs/procfs.c:134: error: 'reiserfs_proc_info_data_t' has no member named 'max_hash_collisions' fs/reiserfs/procfs.c:134: error: 'reiserfs_proc_info_data_t' has no member named 'breads' fs/reiserfs/procfs.c:135: error: 'reiserfs_proc_info_data_t' has no member named 'bread_miss' fs/reiserfs/procfs.c:135: error: 'reiserfs_proc_info_data_t' has no member named 'search_by_key' fs/reiserfs/procfs.c:136: error: 'reiserfs_proc_info_data_t' has no member named 'search_by_key_fs_changed' fs/reiserfs/procfs.c:136: error: 'reiserfs_proc_info_data_t' has no member named 'search_by_key_restarted' fs/reiserfs/procfs.c:137: error: 'reiserfs_proc_info_data_t' has no member named 'insert_item_restarted' fs/reiserfs/procfs.c:137: error: 'reiserfs_proc_info_data_t' has no member named 'paste_into_item_restarted' fs/reiserfs/procfs.c:138: error: 'reiserfs_proc_info_data_t' has no member named 'cut_from_item_restarted' fs/reiserfs/procfs.c:139: error: 'reiserfs_proc_info_data_t' has no member named 'delete_solid_item_restarted' fs/reiserfs/procfs.c:139: error: 'reiserfs_proc_info_data_t' has no member named 'delete_item_restarted' fs/reiserfs/procfs.c:140: error: 'reiserfs_proc_info_data_t' has no member named 'leaked_oid' fs/reiserfs/procfs.c:140: error: 'reiserfs_proc_info_data_t' has no member named 'leaves_removable' fs/reiserfs/procfs.c: In function 'show_per_level': fs/reiserfs/procfs.c:184: error: 'reiserfs_proc_info_data_t' has no member named 'balance_at' fs/reiserfs/procfs.c:185: error: 'reiserfs_proc_info_data_t' has no member named 'sbk_read_at' fs/reiserfs/procfs.c:186: error: 'reiserfs_proc_info_data_t' has no member named 'sbk_fs_changed' fs/reiserfs/procfs.c:187: error: 'reiserfs_proc_info_data_t' has no member named 'sbk_restarted' fs/reiserfs/procfs.c:188: error: 'reiserfs_proc_info_data_t' has no member named 'free_at' fs/reiserfs/procfs.c:189: error: 'reiserfs_proc_info_data_t' has no member named 'items_at' fs/reiserfs/procfs.c:190: error: 'reiserfs_proc_info_data_t' has no member named 'can_node_be_removed' fs/reiserfs/procfs.c:191: error: 'reiserfs_proc_info_data_t' has no member named 'lnum' fs/reiserfs/procfs.c:192: error: 'reiserfs_proc_info_data_t' has no member named 'rnum' fs/reiserfs/procfs.c:193: error: 'reiserfs_proc_info_data_t' has no member named 'lbytes' fs/reiserfs/procfs.c:194: error: 'reiserfs_proc_info_data_t' has no member named 'rbytes' fs/reiserfs/procfs.c:195: error: 'reiserfs_proc_info_data_t' has no member named 'get_neighbors' fs/reiserfs/procfs.c:196: error: 'reiserfs_proc_info_data_t' has no member named 'get_neighbors_restart' fs/reiserfs/procfs.c:197: error: 'reiserfs_proc_info_data_t' has no member named 'need_l_neighbor' fs/reiserfs/procfs.c:197: error: 'reiserfs_proc_info_data_t' has no member named 'need_r_neighbor' fs/reiserfs/procfs.c: In function 'show_bitmap': fs/reiserfs/procfs.c:224: error: 'reiserfs_proc_info_data_t' has no member named 'free_block' fs/reiserfs/procfs.c:225: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:226: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:227: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:228: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:229: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:230: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:230: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c: In function 'show_journal': fs/reiserfs/procfs.c:384: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:385: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:386: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:387: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:388: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:389: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:390: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:391: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:392: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:393: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:394: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:395: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:395: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:395: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c: In function 'reiserfs_proc_info_init': fs/reiserfs/procfs.c:504: warning: implicit declaration of function '__PINFO' fs/reiserfs/procfs.c:504: error: request for member 'lock' in something not a structure or union fs/reiserfs/procfs.c: In function 'reiserfs_proc_info_done': fs/reiserfs/procfs.c:544: error: request for member 'lock' in something not a structure or union fs/reiserfs/procfs.c:545: error: request for member 'exiting' in something not a structure or union fs/reiserfs/procfs.c:546: error: request for member 'lock' in something not a structure or union Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08tty: introduce no_tty and use it in selinuxEric W. Biederman-9/+19
While researching the tty layer pid leaks I found a weird case in selinux when we drop a controlling tty because of inadequate permissions we don't do the normal hangup processing. Which is a problem if it happens the session leader has exec'd something that can no longer access the tty. We already have code in the kernel to handle this case in the form of the TIOCNOTTY ioctl. So this patch factors out a helper function that is the essence of that ioctl and calls it from the selinux code. This removes the inconsistency in handling dropping of a controlling tty and who knows it might even make some part of user space happy because it received a SIGHUP it was expecting. In addition since this removes the last user of proc_set_tty outside of tty_io.c proc_set_tty is made static and removed from tty.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Morris <jmorris@namei.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08tty: simplify calling of put_pid.Eric W. Biederman-17/+6
This patch should contain no functional changes. At some point I got confused and thought put_pid could not be called while a spin lock was held. While it may be nice to avoid that to reduce lock hold times put_pid can be safely called while we hold a spin lock. This patch removes all of the complications from the code introduced by my misunderstanding, making the code a little more readable. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08tty: remove unnecessary export of proc_clear_ttyEric W. Biederman-1/+0
All of the users of proc_clear_tty are compiled into the kernel so exporting this symbol appears gratuitous. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Fixes and cleanups for earlyprintk aka boot consoleGerd Hoffmann-77/+35
The console subsystem already has an idea of a boot console, using the CON_BOOT flag. The implementation has some flaws though. The major problem is that presence of a boot console makes register_console() ignore any other console devices (unless explicitly specified on the kernel command line). This patch fixes the console selection code to *not* consider a boot console a full-featured one, so the first non-boot console registering will become the default console instead. This way the unregister call for the boot console in the register_console() function actually triggers and the handover from the boot console to the real console device works smoothly. Added a printk for the handover, so you know which console device the output goes to when the boot console stops printing messages. The disable_early_printk() call is obsolete with that patch, explicitly disabling the early console isn't needed any more as it works automagically with that patch. I've walked through the tree, dropped all disable_early_printk() instances found below arch/ and tagged the consoles with CON_BOOT if needed. The code is tested on x86, sh (thanks to Paul) and mips (thanks to Ralf). Changes to last version: Rediffed against -rc3, adapted to mips cleanups by Ralf, fixed "udbg-immortal" cmd line arg on powerpc. Signed-off-by: Gerd Hoffmann <kraxel@exsuse.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08enlarge console.nameAndrew Morton-3/+2
console.name[] is eight chars, but so is "earlyvga". So when we try to print console->name when using earlyvga it runs off the end of the string. Make it bigger. Diagnosed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08/proc/*/oom_score oops re badnessAlexey Dobriyan-0/+2
Eternal quest to make while true; do cat /proc/fs/xfs/stat >/dev/null 2>/dev/null; done while true; do find /proc -type f 2>/dev/null | xargs cat >/dev/null 2>/dev/null; done while true; do modprobe xfs; rmmod xfs; done work reliably continues and now kernel oopses in the following way: BUG: unable to handle ... at virtual address 6b6b6b6b EIP is at badness process: cat proc_oom_score proc_info_read sys_fstat64 vfs_read proc_info_read sys_read Failing code is prefetch hidden in list_for_each_entry() in badness(). badness() is reachable from two points. One is proc_oom_score, another is out_of_memory() => select_bad_process() => badness(). Second path grabs tasklist_lock, while first doesn't. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08futex: restartable futex_waitNick Piggin-5/+51
LTP test sigaction_16_24 fails, because it expects sem_wait to be restarted if SA_RESTART is set. sem_wait is implemented with futex_wait, that currently doesn't support being restarted. Ulrich confirms that the call should be restartable. Implement a restart_block method to handle the relative timeout, and allow restarts. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08futex: get_futex_key, get_key_refs and drop_key_refsRusty Russell-36/+43
lguest uses the convenient futex infrastructure for inter-domain I/O, so expose get_futex_key, get_key_refs (renamed get_futex_key_refs) and drop_key_refs (renamed drop_futex_key_refs). Also means we need to expose the union that these use. No code changes. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: add RTC class driver for the Maxim MAX6900Dale Farnsworth-0/+322
Signed-off-by: Dale Farnsworth.org <dale@farnsworth.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08RTC: add rtc-rs5c313 driverNobuhiro Iwamatsu-0/+412
Add an RTC driver for Ricoh RS5C313 RTC chip. [akpm@linux-foundation.org: Zillions of coding-style fixes] [akpm@linux-foundation.org: build fixes] Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08as: fix antic_expire checkNick Piggin-3/+3
Fix units mismatch (jiffies vs msecs) in as-iosched.c, spotted by Xiaoning Ding <dingxn@cse.ohio-state.edu>. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Subject: jsm driver fix for linuxpps supportLen Sorensen-1/+6
The jsm driver doesn't currently use the uart_handle_*_change helper functions, which are the obvious place for things like linuxpps to tie into (which it now does of course), and as a result the jsm driver can not be used with linuxpps and anything else that ties into the serial_core helper functions. This patch adds calls to these helper functions whenever the value they manage changes. That actual storage of the state is not modified since the jsm driver caches the current settings (The 8250 driver reads them everytime a user asks for the state), and only updates them whenever they change. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Cc: Scott H Kilau <Scott_Kilau@digi.com> Cc: Wendy Xiong <wendyx@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Small fixes for jsm driverLen Sorensen-0/+1
The jsm driver fails when you try to use the TIOCSSERIAL ioctl. The reason is that the driver never sets uart_port.uartclk, causing the data received using TIOCGSERIAL to not match the internal state of the driver. This patch fixes this problem by settings the uartclk to the value used by the serial_core (16 times the baud base). Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Cc: Scott H Kilau <Scott_Kilau@digi.com> Cc: Wendy Xiong <wendyx@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08cyclades: remove custom typesKlaus Kudielka-114/+115
Switch from private uclong, etc over to standard types. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fix cyclades.h for x86_64 (and probably others)Klaus Kudielka-9/+7
At least on x86_64 the present cyclades.h is broken due to the wrong size of uclong. This affects, of course, both the kernel and the user-level utilities. The symptom is that cyzload refuses to load the firmware. I also managed to freeze the machine when unloading the module. The patch below fixes this in an architecture-independent way. I have tested it with 2.6.19 and the driver works fine again with a Cyclades-Z on an Athlon 64 X2. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Kprobes: Make kprobe.symbol_name constAnanth N Mavinakayanahalli-1/+1
Kprobes doesn't scribble the kprobe.symbol_name field. Its only set by the module when registering the probe. Modules that exercise good hygiene using the "const" qualifier will see warnings... warning: assignment discards qualifiers from pointer target type Make struct kprobe.symbol_name const char * Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08tty: i386/x86_64 arbitary speed supportAlan Cox-3/+23
Adds the needed TCGETS2/TCSETS2 ioctl calls, structures, defines and the like. Tested against the test suite and passes. Other platforms should need roughly the same change. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08VFS: delay the dentry name generation on sockets and pipesEric Dumazet-14/+86
1) Introduces a new method in 'struct dentry_operations'. This method called d_dname() might be called from d_path() to build a pathname for special filesystems. It is called without locks. Future patches (if we succeed in having one common dentry for all pipes/sockets) may need to change prototype of this method, but we now use : char *d_dname(struct dentry *dentry, char *buffer, int buflen); 2) Adds a dynamic_dname() helper function that eases d_dname() implementations 3) Defines d_dname method for sockets : No more sprintf() at socket creation. This is delayed up to the moment someone does an access to /proc/pid/fd/... 4) Defines d_dname method for pipes : No more sprintf() at pipe creation. This is delayed up to the moment someone does an access to /proc/pid/fd/... A benchmark consisting of 1.000.000 calls to pipe()/close()/close() gives a *nice* speedup on my Pentium(M) 1.6 Ghz : 3.090 s instead of 3.450 s Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Christoph Hellwig <hch@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08add file position info to procMiklos Szeredi-18/+114
Add support for finding out the current file position, open flags and possibly other info in the future. These new entries are added: /proc/PID/fdinfo/FD /proc/PID/task/TID/fdinfo/FD For each fd the information is provided in the following format: pos: 1234 flags: 0100002 [bunk@stusta.de: make struct proc_fdinfo_file_operations static] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08procfs: reorder struct pid_dentry to save space on 64bit archs, and constify ↵Eric Dumazet-26/+27
them Change the order of fields of struct pid_entry (file fs/proc/base.c) in order to avoid a hole on 64bit archs. (8 bytes saved per object) Also change all pid_entry arrays to be const qualified, to make clear they must not be modified. Before (on x86_64) : # size fs/proc/base.o text data bss dec hex filename 15549 2192 0 17741 454d fs/proc/base.o After : # size fs/proc/base.o text data bss dec hex filename 17229 176 0 17405 43fd fs/proc/base.o Thats 336 bytes saved on kernel size on x86_64 Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08drivers/char/synclink.c: check kmalloc() return valueAmit Choudhary-1/+6
Signed-off-by: Amit Choudhary <amit2030@gmail.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08remove unused header file: drivers/char/digi.hRobert P. J. Day-71/+0
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08remove unused header file: drivers/message/i2o/i2o_lan.hRobert P. J. Day-159/+0
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08proc: maps protectionKees Cook-2/+48
The /proc/pid/ "maps", "smaps", and "numa_maps" files contain sensitive information about the memory location and usage of processes. Issues: - maps should not be world-readable, especially if programs expect any kind of ASLR protection from local attackers. - maps cannot just be 0400 because "-D_FORTIFY_SOURCE=2 -O2" makes glibc check the maps when %n is in a *printf call, and a setuid(getuid()) process wouldn't be able to read its own maps file. (For reference see http://lkml.org/lkml/2006/1/22/150) - a system-wide toggle is needed to allow prior behavior in the case of non-root applications that depend on access to the maps contents. This change implements a check using "ptrace_may_attach" before allowing access to read the maps contents. To control this protection, the new knob /proc/sys/kernel/maps_protect has been added, with corresponding updates to the procfs documentation. [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: New sysctl numbers are old hat] Signed-off-by: Kees Cook <kees@outflux.net> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08virtual_eisa_root_init() should be __initAndrew Morton-1/+1
WARNING: vmlinux - Section mismatch: reference to .init.text:eisa_root_register from .text between 'virtual_eisa_root_init' (at offset 0xc026b80f) and 'cpufreq_debug_disable_ratelimit' Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rocket: remove modversions includeRobert P. J. Day-4/+0
It misspelled "MODVERSIONS" preprocessor variable with "CONFIG_MODVERSIONS". Just kill it all. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08floppy: handle device_create_file() failure while initDmitriy Monakhov-1/+6
This patch kills the "ignoring return value of 'device_create_file'" warning message. Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08replace pci_find_device in drivers/telephony/ixj.cSurya-1/+2
Cleaning up of pci_find_device in drivers/telephony/ixj.c. Signed-off-by: Surya Prabhakar <surya.prabhakar@wipro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08tpm_infineon: add support for devices in mmio spaceAlex Williamson-66/+165
tAdd adds support for devices living in MMIO space to the Infineon TPM driver. These can be found on some of the newer HP ia64 systems. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Acked-by: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08namei.c: remove utterly outdated commentChristoph Hellwig-11/+0
We don't have a routine called namei() anymore since at least 2.3.x, and the comment is just totally out of sync with the current lookup logic. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vfs: remove superflous sb == NULL checksChristoph Hellwig-4/+2
inode->i_sb is always set, not need to check for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08proc: remove pathetic ->deleted WARN_ONAlexey Dobriyan-2/+0
WARN_ON(de && de->deleted); is sooo unreliable. Why? proc_lookup remove_proc_entry =========== ================= lock_kernel(); spin_lock(&proc_subdir_lock); [find proc entry] spin_unlock(&proc_subdir_lock); spin_lock(&proc_subdir_lock); [find proc entry] proc_get_inode ============== WARN_ON(de && de->deleted); ... if (!atomic_read(&de->count)) free_proc_entry(de); else de->deleted = 1; So, if you have some strange oops [1], and doesn't see this WARN_ON it means nothing. [1] try_module_get() of module which doesn't exist, two lines below should suffice, or not? Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Fix race between proc_readdir and remove_proc_entryDarrick J. Wong-2/+9
Fix the following race: proc_readdir remove_proc_entry ============ ================= spin_lock(&proc_subdir_lock); [choose PDE to start filldir from] spin_unlock(&proc_subdir_lock); spin_lock(&proc_subdir_lock); [find PDE] [free PDE, refcount is 0] spin_unlock(&proc_subdir_lock); /* boom */ if (filldir(dirent, de->name, ... [de_put on error path --adobriyan] Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Fix race between proc_get_inode() and remove_proc_entry()Alexey Dobriyan-8/+9
proc_lookup remove_proc_entry =========== ================= lock_kernel(); spin_lock(&proc_subdir_lock); [find PDE with refcount 0] spin_unlock(&proc_subdir_lock); spin_lock(&proc_subdir_lock); [find PDE with refcount 0] [check refcount and free PDE] spin_unlock(&proc_subdir_lock); proc_get_inode: de_get(de); /* boom */ Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08add filesystem subtype supportMiklos Szeredi-6/+55
There's a slight problem with filesystem type representation in fuse based filesystems. From the kernel's view, there are just two filesystem types: fuse and fuseblk. From the user's view there are lots of different filesystem types. The user is not even much concerned if the filesystem is fuse based or not. So there's a conflict of interest in how this should be represented in fstab, mtab and /proc/mounts. The current scheme is to encode the real filesystem type in the mount source. So an sshfs mount looks like this: sshfs#user@server:/ /mnt/server fuse rw,nosuid,nodev,... This url-ish syntax works OK for sshfs and similar filesystems. However for block device based filesystems (ntfs-3g, zfs) it doesn't work, since the kernel expects the mount source to be a real device name. A possibly better scheme would be to encode the real type in the type field as "type.subtype". So fuse mounts would look like this: /dev/hda1 /mnt/windows fuseblk.ntfs-3g rw,... user@server:/ /mnt/server fuse.sshfs rw,nosuid,nodev,... This patch adds the necessary code to the kernel so that this can be correctly displayed in /proc/mounts. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08oss: strlcpy is smart enoughJean Delvare-1/+1
strlcpy already accounts for the trailing zero in its length computation, so there is no need to substract one to the buffer size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08epoll: optimizations and cleanupsDavide Libenzi-147/+86
Epoll is doing multiple passes over the ready set at the moment, because of the constraints over the f_op->poll() call. Looking at the code again, I noticed that we already hold the epoll semaphore in read, and this (together with other locking conditions that hold while doing an epoll_wait()) can lead to a smarter way [1] to "ship" events to userspace (in a single pass). This is a stress application that can be used to test the new code. It spwans multiple thread and call epoll_wait() and epoll_ctl() from many threads. Stress tested on my dual Opteron 254 w/out any problems. http://www.xmailserver.org/totalmess.c This is not a benchmark, just something that tries to stress and exploit possible problems with the new code. Also, I made a stupid micro-benchmark: http://www.xmailserver.org/epwbench.c [1] Considering that epoll must be thread-safe, there are five ways we can be hit during an epoll_wait() transfer loop (ep_send_events()): 1) The epoll fd going away and calling ep_free This just can't happen, since we did an fget() in sys_epoll_wait 2) An epoll_ctl(EPOLL_CTL_DEL) This can't happen because epoll_ctl() gets ep->sem in write, and we're holding it in read during ep_send_events() 3) An fd stored inside the epoll fd going away This can't happen because in eventpoll_release_file() we get ep->sem in write, and we're holding it in read during ep_send_events() 4) Another epoll_wait() happening on another thread They both can be inside ep_send_events() at the same time, we get (splice) the ready-list under the spinlock, so each one will get its own ready list. Note that an fd cannot be at the same time inside more than one ready list, because ep_poll_callback() will not re-queue it if it sees it already linked: if (ep_is_linked(&epi->rdllink)) goto is_linked; Another case that can happen, is two concurrent epoll_wait(), coming in with a userspace event buffer of size, say, ten. Suppose there are 50 event ready in the list. The first epoll_wait() will "steal" the whole list, while the second, seeing no events, will go to sleep. But at the end of ep_send_events() in the first epoll_wait(), we will re-inject surplus ready fds, and we will trigger the proper wake_up to the second epoll_wait(). 5) ep_poll_callback() hitting us asyncronously This is the tricky part. As I said above, the ep_is_linked() test done inside ep_poll_callback(), will guarantee us that until the item will result linked to a list, ep_poll_callback() will not try to re-queue it again (read, write data on any of its members). When we do a list_del() in ep_send_events(), the item will still satisfy the ep_is_linked() test (whatever data is written in prev/next, it'll never be its own pointer), so ep_poll_callback() will still leave us alone. It's only after the eventual smp_mb()+INIT_LIST_HEAD(&epi->rdllink) that it'll become visible to ep_poll_callback(), but at the point we're already past it. [akpm@osdl.org: 80 cols] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08the scheduled removal of OBSOLETE_OSS optionsAdrian Bunk-41/+0
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08ext3: dirindex error pointer issuesDmitriy Monakhov-22/+30
- ext3_dx_find_entry() exit with out setting proper error pointer - do_split() exit with out setting proper error pointer it is realy painful because many callers contain folowing code: de = do_split(handle,dir, &bh, frame, &hinfo, &retval); if (!(de)) return retval; <<< WOW retval wasn't changed by do_split(), so caller failed <<< but return SUCCESS :) - Rearrange do_split() error path. Current error path is realy ugly, all this up and down jump stuff doesn't make code easy to understand. [dmonakhov@sw.ru: fix annoying fake error messages] Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Optimize timespec_trunc()Eric Dumazet-30/+30
The first thing done by timespec_trunc() is : if (gran <= jiffies_to_usecs(1) * 1000) This should really be a test against a constant known at compile time. Alas, it isnt. jiffies_to_usec() was unilined so C compiler emits a function call and a multiply to compute : a CONSTANT. mov $0x1,%edi mov %rbx,0xffffffffffffffe8(%rbp) mov %r12,0xfffffffffffffff0(%rbp) mov %edx,%ebx mov %rsi,0xffffffffffffffc8(%rbp) mov %rsi,%r12 callq ffffffff80232010 <jiffies_to_usecs> imul $0x3e8,%eax,%eax cmp %ebx,%eax This patch reorders kernel/time.c a bit so that jiffies_to_usecs() is defined before timespec_trunc() so that compiler now generates : cmp $0x3d0900,%edx (HZ=250 on my machine) This gives a better code (timespec_trunc() becoming a leaf function), and shorter kernel size as well. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08init dma masks in pnp_devDavid Brownell-0/+4
PNP now initializes device dma masks, which prevents oopses when generic dma calls are made using pnp device nodes. This assumes PNP only uses ISA DMA, with 24 bit addresses; and that it's safe to init those masks for all devices (rather than finding out which devices have been assigned DMA channels, and handling only those). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Adam Belay <abelay@novell.com> Cc: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>