summaryrefslogtreecommitdiff
path: root/arch/csky/abiv1
AgeCommit message (Collapse)AuthorLines
2020-05-28csky: Coding convention in entry.SGuo Ren-5/+0
There is no fixup or feature in the patch, we only cleanup with: - Remove unnecessary reg used (r11, r12), just use r9 & r10 & syscallid regs as temp useage. - Add _TIF_SYSCALL_WORK and _TIF_WORK_MASK to gather macros. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-05-28csky: Fixup CONFIG_PREEMPT panicGuo Ren-1/+0
log: [    0.13373200] Calibrating delay loop... [    0.14077600] ------------[ cut here ]------------ [    0.14116700] WARNING: CPU: 0 PID: 0 at kernel/sched/core.c:3790 preempt_count_add+0xc8/0x11c [    0.14348000] DEBUG_LOCKS_WARN_ON((preempt_count() < 0))Modules linked in: [    0.14395100] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0 #7 [    0.14410800] [    0.14427400] Call Trace: [    0.14450700] [<807cd226>] dump_stack+0x8a/0xe4 [    0.14473500] [<80072792>] __warn+0x10e/0x15c [    0.14495900] [<80072852>] warn_slowpath_fmt+0x72/0xc0 [    0.14518600] [<800a5240>] preempt_count_add+0xc8/0x11c [    0.14544900] [<807ef918>] _raw_spin_lock+0x28/0x68 [    0.14572600] [<800e0eb8>] vprintk_emit+0x84/0x2d8 [    0.14599000] [<800e113a>] vprintk_default+0x2e/0x44 [    0.14625100] [<800e2042>] vprintk_func+0x12a/0x1d0 [    0.14651300] [<800e1804>] printk+0x30/0x48 [    0.14677600] [<80008052>] lockdep_init+0x12/0xb0 [    0.14703800] [<80002080>] start_kernel+0x558/0x7f8 [    0.14730000] [<800052bc>] csky_start+0x58/0x94 [    0.14756600] irq event stamp: 34 [    0.14775100] hardirqs last  enabled at (33): [<80067370>] ret_from_exception+0x2c/0x72 [    0.14793700] hardirqs last disabled at (34): [<800e0eae>] vprintk_emit+0x7a/0x2d8 [    0.14812300] softirqs last  enabled at (32): [<800655b0>] __do_softirq+0x578/0x6d8 [    0.14830800] softirqs last disabled at (25): [<8007b3b8>] irq_exit+0xec/0x128 The preempt_count of reg could be destroyed after csky_do_IRQ without reload from memory. After reference to other architectures (arm64, riscv), we move preempt entry into ret_from_exception and disable irq at the beginning of ret_from_exception instead of RESTORE_ALL. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Reported-by: Lu Baoquan <lu.baoquan@intellif.com>
2020-05-13csky: Fixup msa highest 3 bits maskLiu Yibin-2/+2
Just as comment mentioned, the msa format: cr<30/31, 15> MSA register format: 31 - 29 | 28 - 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 BA Reserved SH WA B SO SEC C D V So we should shift 29 bits not 28 bits for mask Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-04-03csky: Fixup cpu speculative execution to IO areaGuo Ren-4/+1
For the memory size ( > 512MB, < 1GB), the MSA setting is: - SSEG0: PHY_START , PHY_START + 512MB - SSEG1: PHY_START + 512MB, PHY_START + 1GB But the real memory is no more than 1GB, there is a gap between the end size of memory and border of 1GB. CPU could speculatively execute to that gap and if the gap of the bus couldn't respond to the CPU request, then the crash will happen. Now make the setting with: - SSEG0: PHY_START , PHY_START + 512MB (no change) - SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB) We also deprecated zhole_szie[] settings, it's only used by arm style CPUs. All memory gap should use Reserved setting of dts in csky system. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Add flush_icache_mm to defer flush icache allGuo Ren-0/+2
Some CPUs don't support icache.va instruction to maintain the whole smp cores' icache. Using icache.all + IPI casue a lot on performace and using defer mechanism could reduce the number of calling icache _flush_all functions. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Remove unnecessary flush_icache_* implementationGuo Ren-3/+0
The abiv2 CPUs are all PIPT cache, so there is no need to implement flush_icache_page function. The function flush_icache_user_range hasn't been used, so just remove it. The function flush_cache_range is not necessary for PIPT cache when tlb mapping changed. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Set regs->usp to kernel sp, when the exception is from kernelGuo Ren-5/+14
In the past, we didn't care about kernel sp when saving pt_reg. But in some cases, we still need pt_reg->usp to represent the kernel stack before enter exception. For cmpxhg in atomic.S, we need save and restore usp for above. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2019-08-22csky: Fixup 610 vipt cache flush mechanismGuo Ren-12/+49
610 has vipt aliasing issue, so we need to finish the cache flush apis mentioned in cachetlb.rst to avoid data corruption. Here is the list of modified apis in the patch: - flush_kernel_dcache_page (new add) - flush_dcache_mmap_lock (new add) - flush_dcache_mmap_unlock (new add) - flush_kernel_vmap_range (new add) - invalidate_kernel_vmap_range (new add) - flush_anon_page (new add) - flush_cache_range (new add) - flush_cache_vmap (flush all) - flush_cache_vunmap (flush all) - flush_cache_mm (only dcache flush) - flush_icache_page (just nop) - copy_from_user_page (remove no need flush) - copy_to_user_page (remove no need flush) Change to V2: - Fixup compile error with xa_lock*(&mapping->i_pages) Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@infradead.org>
2019-08-20csky: Support kernel non-aligned accessGuo Ren-17/+45
We prohibit non-aligned access in kernel mode, but some special NIC driver needs to support kernel-state unaligned access. For example, when the bus does not support unaligned access, IP header parsing will cause non-aligned access and driver does not recopy the skb buffer to dma for performance reasons. Added kernel_enable & user_enable to control unaligned access and added kernel_count & user_count for statistical unaligned access. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-08-20csky: Fixup defer cache flush for 610Guo Ren-25/+29
We use defer cache flush mechanism to improve the performance of 610, but the implementation is wrong. We fix it up now and update the mechanism: - Zero page needn't be flushed. - If page is file mapping & non-touched in user space, defer flush. - If page is anon mapping or dirty file mapping, flush immediately. - In update_mmu_cache finish the defer flush by flush_dcache_page(). For 610 we need take care the dcache aliasing issue: - VIPT cache with 8K-bytes size per way in 4K page granularity. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-08-20csky: Fixup arch_get_unmapped_area() implementationGuo Ren-37/+43
Current arch_get_unmapped_area() of abiv1 doesn't use standard kernel api. After referring to the implementation of arch/arm, we implement it with vm_unmapped_area() from linux/mm.h. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19Merge tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds-42/+6
Pull arch/csky pupdates from Guo Ren: "This round of csky subsystem gives two features (ASID algorithm update, Perf pmu record support) and some fixups. ASID updates: - Revert mmu ASID mechanism - Add new asid lib code from arm - Use generic asid algorithm to implement switch_mm - Improve tlb operation with help of asid Perf pmu record support: - Init pmu as a device - Add count-width property for csky pmu - Add pmu interrupt support - Fix perf record in kernel/user space - dt-bindings: Add csky PMU bindings Fixes: - Fixup no panic in kernel for some traps - Fixup some error count in 810 & 860. - Fixup abiv1 memset error" * tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linux: csky: Fixup abiv1 memset error csky: Improve tlb operation with help of asid csky: Use generic asid algorithm to implement switch_mm csky: Add new asid lib code from arm csky: Revert mmu ASID mechanism dt-bindings: csky: Add csky PMU bindings dt-bindings: interrupt-controller: Update csky mpintc csky: Fixup some error count in 810 & 860. csky: Fix perf record in kernel/user space csky: Add pmu interrupt support csky: Add count-width property for csky pmu csky: Init pmu as a device csky: Fixup no panic in kernel for some traps csky: Select intc & timer drivers
2019-07-19csky: Fixup abiv1 memset errorGuo Ren-42/+0
Current memset implementation in abiv1 is wrong and it'll cause unalign access. Just remove it and use the generic one. This patch will cause performance degradation and we will improve it with a new design in next patchset. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19csky: Use generic asid algorithm to implement switch_mmGuo Ren-0/+6
Use linux generic asid/vmid algorithm to implement csky switch_mm function. The algorithm is from arm and it could work with SMP system. It'll help reduce tlb flush for switch_mm in task/vm switch. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-05-29signal: Remove the task parameter from force_sig_faultEric W. Biederman-1/+1
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-22csky: Use va_pa_offset instead of phys_offsetGuo Ren-2/+2
The name of phys_offset is so common for global export and it may conflict with some local name. So change phys_offset to va_pa_offset which also used by riscv. Also use __pa() and __va() instead of using phys_offset directly. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Support vmlinux bootup with MMU offGuo Ren-12/+17
Modify SETUP_MMU macro to fit on both MMU-on or MMU-off enviornment and vmlinux could bootup from MMU off enviornment for some cases. Unify the style of _start and _start_smp_secondary in head.S to make head.S looks more concise and easy to understand. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Add perf_arch_fetch_caller_regs supportMao Han-0/+1
In trace events as tracepoints context are not able to be retrieve with task_pt_regs. Without arch caller regs support the pt_regs context will be all zero, perf can not parsing the callchain and resolving the symbols correctly, some time will even get into deadlock while handling the page fault, eg: perf kmem —page record ls Changelog - Add test case cmd in comment - Use regs_fp(regs) which is defined in abi/regdef.h Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-04-22csky: Support dynamic start physical addressGuo Ren-2/+37
Before this patch csky-linux need CONFIG_RAM_BASE to determine start physical address. Now we use phys_offset variable to replace the macro of PHYS_OFFSET and we setup phys_offset with real physical address which is determined during startup in head.S. With this patch we needn't re-compile kernel for different start physical address. ie: 0x0 / 0xc0000000 start physical address could use the same vmlinux, be care different start address must be 512MB aligned. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Reconstruct signal processingGuo Ren-7/+2
Linux kernel has provided some apis for arch signal's implementation. For example: restore_saved_sigmask() set_current_blocked() restore_altstack() But in last version of csky signal.c didn't use them and some codes are confusing, so reconstruct signal.c with reference to riscv's code. Now csky signal.c implementation are very close to riscv and we can get the following benefits: - Clear code structure - The signal code of riscv and csky can be reviewed together - Promoting the unification of arch's signal implementation Also modified the related code in entry.S Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Use in_syscall & forget_syscall instead of r11_sigGuo Ren-2/+0
We could use regs->sr 16-24 bits to detect syscall: VEC_TRAP0 and r11_sig is no necessary for current implementation. In this patch, we implement the in_syscall and forget_syscall which are inspired from arm & nds32, but csky pt_regs has no syscall_num element and we just set zero to regs->sr's vector-bits-field instead. For ret_from_fork, current task was forked from parent which is in syscall progress and its regs->sr has been already setted with VEC_TRAP0. See: arch/csky/kernel/process.c: copy_thread() Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-04-22csky: Update syscall_trace_enter/exit implementationGuo Ren-0/+4
Previous syscall_trace implementation couldn't support AUDITSYSCALL and SYSCALL_TRACEPOINTS. Now we redesign it to support audit_syscall and syscall_tracepoints just like other archs'. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Dmitry V. Levin <ldv@altlinux.org> Cc: Arnd Bergmann <arnd@arndb.de>
2019-01-05Merge tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linuxLinus Torvalds-0/+18
Pull arch/csky updates from Guo Ren: "Here are three main features (cpu_hotplug, basic ftrace, basic perf) and some bugfixes: Features: - Add CPU-hotplug support for SMP - Add ftrace with function trace and function graph trace - Add Perf support - Add EM_CSKY_OLD 39 - optimize kernel panic print. - remove syscall_exit_work Bugfixes: - fix abiv2 mmap(... O_SYNC) failure - fix gdb coredump error - remove vdsp implement for kernel - fix qemu failure to bootup sometimes - fix ftrace call-graph panic - fix device tree node reference leak - remove meaningless header-y - fix save hi,lo,dspcr regs in switch_stack - remove unused members in processor.h" * tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linux: csky: Add perf support for C-SKY csky: Add EM_CSKY_OLD 39 clocksource/drivers/c-sky: fixup ftrace call-graph panic csky: ftrace call graph supported. csky: basic ftrace supported csky: remove unused members in processor.h csky: optimize kernel panic print. csky: stacktrace supported. csky: CPU-hotplug supported for SMP clocksource/drivers/c-sky: fixup qemu fail to bootup sometimes. csky: fixup save hi,lo,dspcr regs in switch_stack. csky: remove syscall_exit_work csky: fixup remove vdsp implement for kernel. csky: bugfix gdb coredump error. csky: fixup abiv2 mmap(... O_SYNC) failed. csky: define syscall_get_arch() elf-em.h: add EM_CSKY csky: remove meaningless header-y csky: Don't leak device tree node reference
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds-2/+2
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-31csky: fixup save hi,lo,dspcr regs in switch_stack.Guo Ren-0/+17
HI, LO, DSPCR registers are 807/810 related regs and no need for 610/860. All of the regs must be saved in pt_regs and switch_stack. This patch fixup saving dspcr reg in switch_stack and pt_regs. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: fixup abiv2 mmap(... O_SYNC) failed.Guo Ren-0/+1
Glibc function mmap(... O_SYNC) will make page to _PAGE_UNCACHE + _PAGE_SO and strong-order page couldn't support unalignment access. So remove _PAGE_SO from _PAGE_UNCACHE, also sync abiv1 with the macro of _PAGE_SO. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reported-by: Liu Renwei <Renwei.Liu@verisilicon.com> Tested-by: Yuan Qiyun <qiyun_yuan@c-sky.com>
2018-10-26csky: Misc headersGuo Ren-0/+53
This patch adds csky registers' definition, bitops, byteorder, asm-offsets codes. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-26csky: Library functionsGuo Ren-0/+428
This patch adds string optimize codes and some auxiliary codes. Signed-off-by: Chen Linfei <linfei_chen@c-sky.com> Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-26csky: ELF and module probeGuo Ren-0/+26
This patch adds ELF definition and module relocate codes. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-26csky: VDSO and rt_sigreturnGuo Ren-0/+17
This patch adds files related to VDSO and our VDSO only support rt_sigreturn. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-25csky: MMU and page table managementGuo Ren-0/+205
This patch adds files related to memory management and here is our memory-layout: Fixmap : 0xffc02000 – 0xfffff000 (4 MB - 12KB) Pkmap : 0xff800000 – 0xffc00000 (4 MB) Vmalloc : 0xf0200000 – 0xff000000 (238 MB) Lowmem : 0x80000000 – 0xc0000000 (1GB) abiv1 CPU (CK610) is VIPT cache and it doesn't support highmem. abiv2 CPUs are all PIPT cache and they could support highmem. Lowmem is directly mapped by msa0 & msa1 reg, and we needn't setup memory page table for it. Link:https://lore.kernel.org/lkml/20180518215548.GH17671@n2100.armlinux.org.uk/ Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Christoph Hellwig <hch@infradead.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-25csky: Cache and TLB routinesGuo Ren-0/+101
This patch adds cache and tlb sync codes for abiv1 & abiv2. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-25csky: Exception handling and mm-faultGuo Ren-0/+486
This patch adds exception handling code, cpuinfo and mm-fault code. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-25csky: Build infrastructureGuo Ren-0/+8
This patch adds Makefile, Kconfig for build infrastructure. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Acked-by: Arnd Bergmann <arnd@arndb.de>