path: root/net/mac80211/sta_info.h
AgeCommit message (Collapse)AuthorLines
2016-04-05mac80211: remove description of dropped memberLuis de Bethencourt-1/+0
Commit 976bd9efdae6 ("mac80211: move beacon_loss_count into ifmgd") removed the member from the sta_info struct but the description stayed lingering. Remove it. Signed-off-by: Luis de Bethencourt <> Signed-off-by: Johannes Berg <>
2016-02-24mac80211: add API to allow filtering frames in BA sessionsSara Sharon-0/+3
If any frames are dropped that are part of a BA session, the reorder buffer will "indefinitely" (until the timeout) wait for them to come in (or a BAR moving the window) and won't release frames after them. This means it isn't possible to filter frames within a BA session in firmware. Introduce an API function that allows such filtering. Calling this function will move the BA window forward to the new SSN, and allows marking frames after the SSN as having been filtered, so any future reordering activity will release frames while skipping the holes. Signed-off-by: Sara Sharon <> Signed-off-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2016-02-24mac80211: support hw managing reorder logicSara Sharon-9/+12
Enable driver to manage the reordering logic itself. This is needed for example for the iwlwifi driver that will support hardware assisted reordering. Signed-off-by: Sara Sharon <> Signed-off-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2015-12-04mac80211: add atomic uploaded keys iteratorEliad Peller-0/+2
add ieee80211_iter_keys_rcu() to iterate over uploaded keys in atomic context (when rcu is locked) The station removal code removes the keys only after calling synchronize_net(), so it's not safe to iterate the keys at this point (and postponing the actual key deletion with call_rcu() might result in some badly-ordered ops calls). Add a flag to indicate a station is being removed, and skip the configured keys if it's set. Signed-off-by: Eliad Peller <> Signed-off-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2015-10-21mac80211: move station statistics into sub-structsJohannes Berg-62/+36
Group station statistics by where they're (mostly) updated (TX, RX and TX-status) and group them into sub-structs of the struct sta_info. Also rename the variables since the grouping now makes it obvious where they belong. This makes it easier to identify where the statistics are updated in the code, and thus easier to think about them. Signed-off-by: Johannes Berg <>
2015-10-21mac80211: move beacon_loss_count into ifmgdJohannes Berg-1/+0
There's little point in keeping (and even sending to userspace) the beacon_loss_count value per station, since it can only apply to the AP on a managed-mode connection. Move the value to ifmgd, advertise it only in managed mode, and remove it from ethtool as it's available through better interfaces. Signed-off-by: Johannes Berg <>
2015-10-21mac80211: remove sta->last_ack_signalJohannes Berg-2/+0
This file only feeds a debugfs file that isn't very useful, so remove it. If necessary, we can add other ways to get this information, for example in the NL80211_CMD_PROBE_CLIENT response. Signed-off-by: Johannes Berg <>
2015-10-14mac80211: move sta_set_rate_info_rx() and make it staticJohannes Berg-2/+0
There's only a single caller of this function, so it can be moved to the same file and made static. Signed-off-by: Johannes Berg <>
2015-09-22mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach-0/+2
Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2015-08-14mac80211: use DECLARE_EWMAJohannes Berg-2/+4
Instead of using the out-of-line average calculation, use the new DECLARE_EWMA() macro to declare a signal EWMA, and use that. This actually *reduces* the code size slightly (on x86-64) while also reducing the station info size by 80 bytes. Signed-off-by: Johannes Berg <>
2015-07-17mac80211: mesh: separate plid and aid conceptsBob Copeland-0/+2
According to 802.11-2012 13.3.1, a mesh STA should assign an AID upon receipt of a mesh peering open frame rather than using the link id of the peer. Using the peer link id has two potential issues: it may not be unique among the peers, and by its nature it is random, so the TIM may not compress well. In preparation for allocating it properly, use sta->sta.aid, but keep the existing behavior of using the plid in the aid we send. Signed-off-by: Bob Copeland <> Signed-off-by: Johannes Berg <>
2015-07-17mac80211: mesh: move fail_avg into mesh structJohannes Berg-3/+4
This value is only used in mesh, so move it into the new mesh sub-struct of the station info. Signed-off-by: Johannes Berg <>
2015-07-17mac80211: upgrade BW of TDLS peers when possibleArik Nemtsov-0/+4
Define a station chandef, to be used for wider-bw TDLS peers. When both peers support the feature, upgrade the channel bandwidth to the maximum allowed by both peers and regulatory. Currently widths up to 80MHz are supported in the 5GHz band. When a TDLS peer connects/disconnects recalculate the channel type of the current chanctx. Make the chanctx width calculation consider wider-bw TDLS peers and similarly fix the max_required_bw calculation for the chanctx min_def. Since the sta->bandwidth is calculated only later on, take bss_conf.chandef.width as the minimal width for station interface. Set the upgraded channel width in the VHT-operation set during TDLS setup. Signed-off-by: Arik Nemtsov <> Signed-off-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2015-07-17mac80211: define TDLS wider BW support bitsArik Nemtsov-0/+3
Allow a device to specify support for the TDLS wider-bandwidth feature. Indicate this support during TDLS setup in the ext-capab IE and set an appropriate station flag when our TDLS peer supports it. This feature gives TDLS peers the ability to use a wider channel than the base width of the BSS. For instance VHT capable TDLS peers connected on a 20MHz channel can extend the channel to 80MHz, if regulatory considerations allow it. Do not cap the bandwidth of such stations by the current BSS channel width in mac80211. Signed-off-by: Arik Nemtsov <> Signed-off-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2015-07-17mac80211: move mesh related station fields to own structJohannes Berg-40/+48
There are now a fairly large number of mesh fields that really aren't needed in any other modes; move those into their own structure and allocate them separately. Signed-off-by: Johannes Berg <>
2015-07-17mac80211: duplicate station's MAC address for hash tableJohannes Berg-1/+4
Currently, the station hash table lookup (or iteration) must access two cachelines for each station - the one with the hash table node, and the one with the MAC address. Duplicate the MAC address next to the hash node to get rid of this. Since the MAC address is static there's no consistency problem introduced by this. Signed-off-by: Johannes Berg <>
2015-07-17mac80211: fix comment referring to RX queueJohannes Berg-1/+2
There are no RX queues in mac80211 (yet), the comment should refer to the TID (including one slot for non-QoS) rather than 'RX queue'. Signed-off-by: Johannes Berg <>
2015-07-17mac80211: remove sta_info.gtk_idxJohannes Berg-2/+0
This struct member is only assigned, never used otherwise; remove it. Signed-off-by: Johannes Berg <>
2015-06-09mac80211: Always check rates and capabilities in mesh modeAlexis Green-0/+3
In mesh mode there is a race between establishing links and processing rates and capabilities in beacons. This is very noticeable with slow beacons (e.g. beacon intervals of 1s) and manifested for us as stations using minstrel when minstrel_ht should be used. Fixed by changing mesh_sta_info_init so that it always checks rates and such if it has not already done so. Signed-off-by: Alexis Green <> CC: Jesse Jones <> Signed-off-by: Johannes Berg <>
2015-05-06mac80211: add missing documentation for rate_ctrl_lockJohannes Berg-0/+2
This was missed in the previous patch, add some documentation for rate_ctrl_lock to avoid docbook warnings. Signed-off-by: Johannes Berg <>
2015-05-05mac80211: remove sta->tx_fragments counterJohannes Berg-2/+0
This counter is unsafe with concurrent TX and is only exposed through debugfs and ethtool. Instead of trying to fix it just remove it for now, if it's really needed then it should be exposed through nl80211 and in a way that drivers that do the fragmentation in the device could support it as well. Signed-off-by: Johannes Berg <>
2015-04-22mac80211: extend fast-xmit for more ciphersJohannes Berg-3/+7
When crypto is offloaded then in some cases it's all handled by the device, and in others only some space for the IV must be reserved in the frame. Handle both of these cases in the fast-xmit path, up to a limit of 18 bytes of space for IVs. Signed-off-by: Johannes Berg <>
2015-04-22mac80211: add TX fastpathJohannes Berg-0/+27
In order to speed up mac80211's TX path, add the "fast-xmit" cache that will cache the data frame 802.11 header and other data to be able to build the frame more quickly. This cache is rebuilt when external triggers imply changes, but a lot of the checks done per packet today are simplified away to the check for the cache. There's also a more detailed description in the code. Signed-off-by: Johannes Berg <>
2015-04-20mac80211: lock rate controlJohannes Berg-0/+1
Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate control aren't properly taking concurrency into account. It's likely that the same is true for other rate control algorithms. In the case of minstrel this manifests itself in crashes when an update and other data access are run concurrently, for example when the stations change bandwidth or similar. In iwlwifi, this can cause firmware crashes. Since fixing all rate control algorithms will be very difficult, just provide locking for invocations. This protects the internal data structures the algorithms maintain. I've manipulated hostapd to test this, by having it change its advertised bandwidth roughly ever 150ms. At the same time, I'm running a flood ping between the client and the AP, which causes this race of update vs. get_rate/status to easily happen on the client. With this change, the system survives this test. Reported-by: Sven Eckelmann <> Signed-off-by: Johannes Berg <>
2015-04-20mac80211: introduce plink lock for plink fieldsBob Copeland-1/+4
The mesh plink code uses sta->lock to serialize access to the plink state fields between the peer link state machine and the peer link timer. Some paths (e.g. those involving mps_qos_null_tx()) unfortunately hold this spinlock across frame tx, which is soon to be disallowed. Add a new spinlock just for plink access. Signed-off-by: Bob Copeland <> Signed-off-by: Johannes Berg <>
2015-04-12Merge tag 'mac80211-next-for-davem-2015-04-10' of ↵David S. Miller-26/+14
git:// Johannes Berg says: ==================== There isn't much left, but we have * new mac80211 internal software queue to allow drivers to have shorter hardware queues and pull on-demand * use rhashtable for mac80211 station table * minstrel rate control debug improvements and some refactoring * fix noisy message about TX power reduction * fix continuous message printing and activity if CRDA doesn't respond * fix VHT-related capabilities with "iw connect" or "iwconfig ..." * fix Kconfig for cfg80211 wireless extensions compatibility ==================== Signed-off-by: David S. Miller <>
2015-04-02Merge git:// S. Miller-0/+2
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <>
2015-04-01mac80211: add an intermediate software queue implementationFelix Fietkau-0/+2
This allows drivers to request per-vif and per-sta-tid queues from which they can pull frames. This makes it easier to keep the hardware queues short, and to improve fairness between clients and vifs. The task of scheduling packet transmission is left up to the driver - queueing is controlled by mac80211. Drivers can only dequeue packets by calling ieee80211_tx_dequeue. This makes it possible to add active queue management later without changing drivers using this code. This can also be used as a starting point to implement A-MSDU aggregation in a way that does not add artificially induced latency. Signed-off-by: Felix Fietkau <> [resolved minor context conflict, minor changes, endian annotations] Signed-off-by: Johannes Berg <>
2015-04-01mac80211: fix RX A-MPDU session reorder timer deletionJohannes Berg-0/+2
There's an issue with the way the RX A-MPDU reorder timer is deleted that can cause a kernel crash like this: * tid_rx is removed - call_rcu(ieee80211_free_tid_rx) * station is destroyed * reorder timer fires before ieee80211_free_tid_rx() runs, accessing the station, thus potentially crashing due to the use-after-free The station deletion is protected by synchronize_net(), but that isn't enough -- ieee80211_free_tid_rx() need not have run when that returns (it deletes the timer.) We could use rcu_barrier() instead of synchronize_net(), but that's much more expensive. Instead, to fix this, add a field tracking that the session is being deleted. In this case, the only re-arming of the timer happens with the reorder spinlock held, so make that code not rearm it if the session is being deleted and also delete the timer after setting that field. This ensures the timer cannot fire after ___ieee80211_stop_rx_ba_session() returns, which fixes the problem. Cc: Signed-off-by: Johannes Berg <>
2015-04-01mac80211: use rhashtable for station tableJohannes Berg-26/+12
We currently have a hand-rolled table with 256 entries and are using the last byte of the MAC address as the hash. This hash is obviously very fast, but collisions are easily created and we waste a lot of space in the common case of just connecting as a client to an AP where we just have a single station. The other common case of an AP is also suboptimal due to the size of the hash table and the ease of causing collisions. Convert all of this to use rhashtable with jhash, which gives us the advantage of a far better hash function (with random perturbation to avoid hash collision attacks) and of course that the hash table grows and shrinks dynamically with chain length, improving both cases above. Use a specialised hash function (using jhash, but with fixed length) to achieve better compiler optimisation as suggested by Sergey Ryazanov. Signed-off-by: Johannes Berg <>
2015-02-28mac80211: remove TX latency measurement codeJohannes Berg-22/+0
Revert commit ad38bfc916da ("mac80211: Tx frame latency statistics") (along with some follow-up fixes). This code turned out not to be as useful in the current form as we thought, and we've internally hacked it up more, but that's not very suitable for upstream (for now), and we might just do that with tracing instead. Therefore, for now at least, remove this code. We might also need to use the skb->tstamp field for the TCP performance issue, which is more important than the debugging. Signed-off-by: Johannes Berg <>
2015-01-08mac80211: provide per-TID RX/TX MSDU countersJohannes Berg-0/+12
Implement the new counters cfg80211 can now advertise to userspace. The TX code is in the sequence number handler, which is a bit odd, but that place already knows the TID and frame type, so it was easiest and least impact there. Signed-off-by: Johannes Berg <>
2014-11-19mac80211: synchronously reserve TID per stationLiad Kaufman-0/+6
In TDLS (e.g., TDLS off-channel) there is a requirement for some drivers to supply an unused TID between the AP and the device to the FW, to allow sending PTI requests and to allow the FW to aggregate on a specific TID for better throughput. To ensure that the allocated TID is indeed unused, this patch introduces an API for blocking the driver from TXing on that TID. Signed-off-by: Liad Kaufman <> Signed-off-by: Johannes Berg <>
2014-11-19mac80211: introduce TDLS channel switch opsArik Nemtsov-0/+3
Implement the cfg80211 TDLS channel switch ops and introduce new mac80211 ones for low-level drivers. Verify low-level driver support for the new ops when using the relevant wiphy feature bit. Also verify the peer supports channel switching before passing the command down. Add a new STA flag to track the off-channel state with the TDLS peer and make sure to cancel the channel-switch if the peer STA is unexpectedly removed. Signed-off-by: Arik Nemtsov <> Signed-off-by: Arik Nemtsov <> Signed-off-by: Johannes Berg <>
2014-11-19mac80211: track AP and peer STA TDLS chan-switch supportArik Nemtsov-0/+2
The AP or peer can prohibit TDLS channel switch via a bit in the extended capabilities IE. Parse the IE and track this bit. Set an appropriate STA flag if both the AP and peer STA support TDLS channel-switching. Add the new STA flag and the missing TDLS_INITIATOR to debugfs. Signed-off-by: Arik Nemtsov <> Signed-off-by: Arik Nemtsov <> Signed-off-by: Johannes Berg <>
2014-10-09mac80211: fix warning on htmldocs for last_tdls_pkt_timeLiad Kaufman-0/+1
Forgot to add an entry to the struct description of sta_info. Signed-off-by: Liad Kaufman <> Reviewed-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2014-09-11mac80211: add TDLS connection timeoutLiad Kaufman-0/+3
Adding a timeout for tearing down a TDLS connection that hasn't had ACKed traffic sent through it for a certain amount of time. Since we have no other monitoring facility to indicate the existance (or non-existance) of a peer, this patch will cause a peer to be considered as unavailable if for some X time at least some Y packets have all not been ACKed. Signed-off-by: Liad Kaufman <> Signed-off-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2014-09-05mac80211: add Intel Mobile Communications copyrightJohannes Berg-0/+1
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <> Signed-off-by: Emmanuel Grumbach <> Signed-off-by: Johannes Berg <>
2014-09-03mac80211: fix offloaded BA session traffic after hw restartMichal Kazior-0/+3
When starting an offloaded BA session it is unknown what starting sequence number should be used. Using last_seq worked in most cases except after hw restart. When hw restart is requested last_seq is (rightfully so) kept unmodified. This ended up with BA sessions being restarted with an aribtrary BA window values resulting in dropped frames until sequence numbers caught up. Instead of last_seq pick seqno of a first Rxed frame of a given BA session. This fixes stalled traffic after hw restart with offloaded BA sessions (currently only ath10k). Signed-off-by: Michal Kazior <> Signed-off-by: Johannes Berg <>
2014-08-15mac80211: don't duplicate station QoS capability dataJohannes Berg-2/+0
We currently track the QoS capability twice: for all peer stations in the WLAN_STA_WME flag, and for any clients associated to an AP interface separately for drivers in the sta-> field. Remove the WLAN_STA_WME flag and track the capability only in the driver-visible field, getting rid of the limitation that the field is only valid in AP mode. Reviewed-by: Arik Nemtsov <> Signed-off-by: Johannes Berg <>
2014-07-21mac80211: fix Rx reordering with RX_FLAG_AMSDU_MOREMichal Kazior-2/+3
Some drivers (e.g. ath10k) report A-MSDU subframes individually with identical seqno. The A-MPDU Rx reorder code did not account for that which made it practically unusable with drivers using RX_FLAG_AMSDU_MORE because it would end up dropping a lot of frames resulting in confusion in upper network transport layers. Signed-off-by: Michal Kazior <> Signed-off-by: Johannes Berg <>
2014-07-21mac80211: track TDLS initiator internallyArik Nemtsov-0/+3
Infer the TDLS initiator and track it in mac80211 via a STA flag. This avoids breaking old userspace that doesn't pass it via nl80211 APIs. The only case where userspace will need to pass the initiator is when the STA is removed due to unreachability before a teardown packet is sent. Support for unreachability was only recently added to wpa_supplicant, so it won't be a problem in practice. Signed-off-by: Arik Nemtsov <> Reviewed-by: Johannes Berg <> Signed-off-by: Johannes Berg <>
2014-06-23cfg80211: make ethtool the driver's responsibilityJohannes Berg-0/+2
Currently, cfg80211 tries to implement ethtool, but that doesn't really scale well, with all the different operations. Make the lower-level driver responsible for it, which currently only has an effect on mac80211. It will similarly not scale well at that level though, since mac80211 also has many drivers. To cleanly implement this in mac80211, introduce a new file and move some code to appropriate places. Signed-off-by: Johannes Berg <>
2014-06-23mac80211: remove weak WEP IV accountingJohannes Berg-2/+0
Since WEP is practically dead, there seems very little point in keeping WEP weak IV accounting. Signed-off-by: Johannes Berg <>
2014-06-23mac80211: remove ignore_plink_timer flagBob Copeland-2/+0
The mesh_plink code is doing some interesting things with the ignore_plink_timer flag. It seems the original intent was to handle this race: cpu 0 cpu 1 ----- ----- start timer handler for state X acquire sta_lock change state from X to Y mod_timer() / del_timer() release sta_lock acquire sta_lock execute state Y timer too soon However, using the mod_timer()/del_timer() return values to detect these cases is broken. As a result, timers get ignored unnecessarily, and stations can get stuck in the peering state machine. Instead, we can detect the case by looking at the timer expiration. In the case of del_timer, just ignore the timers in the following (LISTEN/ESTAB) states since they won't have timers anyway. Signed-off-by: Bob Copeland <> Signed-off-by: Johannes Berg <>
2014-06-23mac80211: fix station/driver powersave raceJohannes Berg-2/+5
It is currently possible to have a race due to the station PS unblock work like this: * station goes to sleep with frames buffered in the driver * driver blocks wakeup * station wakes up again * driver flushes/returns frames, and unblocks, which schedules the unblock work * unblock work starts to run, and checks that the station is awake (i.e. that the WLAN_STA_PS_STA flag isn't set) * we process a received frame with PM=1, setting the flag again * ieee80211_sta_ps_deliver_wakeup() runs, delivering all frames to the driver, and then clearing the WLAN_STA_PS_DRIVER and WLAN_STA_PS_STA flags In this scenario, mac80211 will think that the station is awake, while it really is asleep, and any TX'ed frames should be filtered by the device (it will know that the station is sleeping) but then passed to mac80211 again, which will not buffer it either as it thinks the station is awake, and eventually the packets will be dropped. Fix this by moving the clearing of the flags to exactly where we learn about the situation. This creates a problem of reordering, so introduce another flag indicating that delivery is being done, this new flag also queues frames and is cleared only while the spinlock is held (which the queuing code also holds) so that any concurrent delivery/TX is handled correctly. Reported-by: Andrei Otcheretianski <> Signed-off-by: Johannes Berg <>
2014-03-05Merge git:// S. Miller-4/+3
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <>
2014-02-20mac80211: fix AP powersave TX vs. wakeup raceEmmanuel Grumbach-4/+3
There is a race between the TX path and the STA wakeup: while a station is sleeping, mac80211 buffers frames until it wakes up, then the frames are transmitted. However, the RX and TX path are concurrent, so the packet indicating wakeup can be processed while a packet is being transmitted. This can lead to a situation where the buffered frames list is emptied on the one side, while a frame is being added on the other side, as the station is still seen as sleeping in the TX path. As a result, the newly added frame will not be send anytime soon. It might be sent much later (and out of order) when the station goes to sleep and wakes up the next time. Additionally, it can lead to the crash below. Fix all this by synchronising both paths with a new lock. Both path are not fastpath since they handle PS situations. In a later patch we'll remove the extra skb queue locks to reduce locking overhead. BUG: unable to handle kernel NULL pointer dereference at 000000b0 IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1 EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211] EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000 ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000) iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9 Stack: e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0 ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210 ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002 Call Trace: [<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211] [<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211] [<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211] [<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211] [<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211] [<c149ef70>] dev_hard_start_xmit+0x450/0x950 [<c14b9aa9>] sch_direct_xmit+0xa9/0x250 [<c14b9c9b>] __qdisc_run+0x4b/0x150 [<c149f732>] dev_queue_xmit+0x2c2/0xca0 Cc: Reported-by: Yaara Rozenblum <> Signed-off-by: Emmanuel Grumbach <> Reviewed-by: Stanislaw Gruszka <> [reword commit log, use a separate lock] Signed-off-by: Johannes Berg <>
2014-02-06mac80211: move VHT related RX_FLAG to another variableEmmanuel Grumbach-0/+2
ieee80211_rx_status.flags is full. Define a new vht_flag variable to be able to set more VHT related flags and make room in flags. Signed-off-by: Emmanuel Grumbach <> Acked-by: Kalle Valo <> [ath10k] Signed-off-by: Johannes Berg <>
2013-12-16mac80211: optimise mixed AP/VLAN station removalJohannes Berg-1/+7
Teach sta_info_flush() to optionally also remove stations from all VLANs associated with an AP interface to optimise the station removal (in particular, synchronize_net().) To not have to add the vlans argument throughout, do some refactoring. Signed-off-by: Johannes Berg <>