summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2015-04-13remove remnants of support for running in no-thread-pointer modeRich Felker-32/+13
since 1.1.0, musl has nominally required a thread pointer to be setup. most of the remaining code that was checking for its availability was doing so for the sake of being usable by the dynamic linker. as of commit 71f099cb7db821c51d8f39dfac622c61e54d794c, this is no longer necessary; the thread pointer is now valid before any libc code (outside of dynamic linker bootstrap functions) runs. this commit essentially concludes "phase 3" of the "transition path for removing lazy init of thread pointer" project that began during the 1.1.0 release cycle.
2015-04-13move thread pointer setup to beginning of dynamic linker stage 3Rich Felker-8/+23
this allows the dynamic linker itself to run with a valid thread pointer, which is a prerequisite for stack protector on archs where the ssp canary is stored in TLS. it will also allow us to remove some remaining runtime checks for whether the thread pointer is valid. as long as the application and its libraries do not require additional size or alignment, this early thread pointer will be kept and reused at runtime. otherwise, a new static TLS block is allocated after library loading has finished and the thread pointer is switched over.
2015-04-13stabilize dynamic linker's layout of static TLSRich Felker-9/+6
previously, the layout of the static TLS block was perturbed by the size of the dtv; dtv size increasing from 0 to 1 perturbed both TLS arch types, and the TLS-above-TP type's layout was perturbed by the specific number of dtv slots (libraries with TLS). this behavior made it virtually impossible to setup a tentative thread pointer address before loading libraries and keep it unchanged as long as the libraries' TLS size/alignment requirements fit. the new code fixes the location of the dtv and pthread structure at opposite ends of the static TLS block so that they will not move unless size or alignment changes.
2015-04-13allow i386 __set_thread_area to be called more than onceRich Felker-1/+5
previously a new GDT slot was requested, even if one had already been obtained by a previous call. instead extract the old slot number from GS and reuse it if it was already set. the formula (GS-3)/8 for the slot number automatically yields -1 (request for new slot) if GS is zero (unset).
2015-04-13dynamic linker bootstrap overhaulRich Felker-909/+627
this overhaul further reduces the amount of arch-specific code needed by the dynamic linker and removes a number of assumptions, including: - that symbolic function references inside libc are bound at link time via the linker option -Bsymbolic-functions. - that libc functions used by the dynamic linker do not require access to data symbols. - that static/internal function calls and data accesses can be made without performing any relocations, or that arch-specific startup code handled any such relocations needed. removing these assumptions paves the way for allowing libc.so itself to be built with stack protector (among other things), and is achieved by a three-stage bootstrap process: 1. relative relocations are processed with a flat function. 2. symbolic relocations are processed with no external calls/data. 3. main program and dependency libs are processed with a fully-functional libc/ldso. reduction in arch-specific code is achived through the following: - crt_arch.h, used for generating crt1.o, now provides the entry point for the dynamic linker too. - asm is no longer responsible for skipping the beginning of argv[] when ldso is invoked as a command. - the functionality previously provided by __reloc_self for heavily GOT-dependent RISC archs is now the arch-agnostic stage-1. - arch-specific relocation type codes are mapped directly as macros rather than via an inline translation function/switch statement.
2015-04-11remove mismatched arguments from vmlock function definitionsRich Felker-2/+2
commit f08ab9e61a147630497198fe3239149275c0a3f4 introduced these accidentally as remnants of some work I tried that did not work out.
2015-04-10apply vmlock wait to __unmapself in pthread_exitRich Felker-0/+4
2015-04-10redesign and simplify vmlock systemRich Felker-45/+29
this global lock allows certain unlock-type primitives to exclude mmap/munmap operations which could change the identity of virtual addresses while references to them still exist. the original design mistakenly assumed mmap/munmap would conversely need to exclude the same operations which exclude mmap/munmap, so the vmlock was implemented as a sort of 'symmetric recursive rwlock'. this turned out to be unnecessary. commit 25d12fc0fc51f1fae0f85b4649a6463eb805aa8f already shortened the interval during which mmap/munmap held their side of the lock, but left the inappropriate lock design and some inefficiency. the new design uses a separate function, __vm_wait, which does not hold any lock itself and only waits for lock users which were already present when it was called to release the lock. this is sufficient because of the way operations that need to be excluded are sequenced: the "unlock-type" operations using the vmlock need only block mmap/munmap operations that are precipitated by (and thus sequenced after) the atomic-unlock they perform while holding the vmlock. this allows for a spectacular lack of synchronization in the __vm_wait function itself.
2015-04-10optimize out setting up robust list with kernel when not neededRich Felker-7/+8
as a result of commit 12e1e324683a1d381b7f15dd36c99b37dd44d940, kernel processing of the robust list is only needed for process-shared mutexes. previously the first attempt to lock any owner-tracked mutex resulted in robust list initialization and a set_robust_list syscall. this is no longer necessary, and since the kernel's record of the robust list must now be cleared at thread exit time for detached threads, optimizing it out is more worthwhile than before too.
2015-04-10process robust list in pthread_exit to fix detached thread use-after-unmapRich Felker-26/+27
the robust list head lies in the thread structure, which is unmapped before exit for detached threads. this leaves the kernel unable to process the exiting thread's robust list, and with a dangling pointer which may happen to point to new unrelated data at the time the kernel processes it. userspace processing of the robust list was already needed for non-pshared robust mutexes in order to perform private futex wakes rather than the shared ones the kernel would do, but it was conditional on linking pthread_mutexattr_setrobust and did not bother processing the pshared mutexes in the list, which requires additional logic for the robust list pending slot in case pthread_exit is interrupted by asynchronous process termination. the new robust list processing code is linked unconditionally (inlined in pthread_exit), handles both private and shared mutexes, and also removes the kernel's reference to the robust list before unmapping and exit if the exiting thread is detached.
2015-04-07fix possible clobbering of syscall return values on mipsRich Felker-3/+6
depending on the compiler's interpretation of __asm__ register names for register class objects, it may be possible for the return value in r2 to be clobbered by the function call to __stat_fix. I have not observed any such breakage in normal builds and suspect it only happens with -O0 or other unusual build options, but since there's an ambiguity as to the semantics of this feature, it's best to use an explicit temporary to avoid the issue. based on reporting and patch by Eugene.
2015-04-04fix getdelim to set the error indicator on all failuresSzabolcs Nagy-2/+5
2015-04-04fix rpath string memory leak on failed dlopenRich Felker-0/+2
when dlopen fails, all partially-loaded libraries need to be unmapped and freed. any of these libraries using an rpath with $ORIGIN expansion may have an allocated string for the expanded rpath; previously, this string was not freed when freeing the library data structures.
2015-04-03halt dynamic linker library search on errors resolving $ORIGIN in rpathRich Felker-8/+18
this change hardens the dynamic linker against the possibility of loading the wrong library due to inability to expand $ORIGIN in rpath. hard failures such as excessively long paths or absence of /proc (when resolving /proc/self/exe for the main executable's origin) do not stop the path search, but memory allocation failures and any other potentially transient failures do. to implement this change, the meaning of the return value of fixup_rpath function is changed. returning zero no longer indicates that the dso's rpath string pointer is non-null; instead, the caller needs to check. a return value of -1 indicates a failure that should stop further path search.
2015-04-01remove macro definition of longjmp from setjmp.hRich Felker-1/+0
the C standard specifies that setjmp is a macro, but longjmp is a normal function. a macro version of it would be permitted (albeit useless) for C (not C++), but would have to be a function-like macro, not an object-like one.
2015-04-01harden dynamic linker library path searchRich Felker-5/+16
transient errors during the path search should not allow the search to continue and possibly open the wrong file. this patch eliminates most conditions where that could happen, but there is still a possibility that $ORIGIN-based rpath processing will have an allocation failure, causing the search to skip such a path. fixing this is left as a separate task. a small bug where overly-long path components caused an infinite loop rather than being skipped/ignored is also fixed.
2015-04-01move O_PATH definition back to arch bitsRich Felker-3/+11
while it's the same for all presently supported archs, it differs at least on sparc, and conceptually it's no less arch-specific than the other O_* macros. O_SEARCH and O_EXEC are still defined in terms of O_PATH in the main fcntl.h.
2015-04-01aarch64: remove duplicate macro definitions in bits/fcntl.hRich Felker-3/+0
2015-04-01aarch64: fix definition of sem_nsems in semid_ds structureRich Felker-1/+7
POSIX requires the sem_nsems member to have type unsigned short. we have to work around the incorrect kernel type using matching endian-specific padding.
2015-04-01aarch64: fix namespace pollution in bits/shm.hSzabolcs Nagy-2/+2
The shm_info struct is a gnu extension and some of its members do not have shm* prefix. This is worked around in sys/shm.h by macros, but aarch64 didn't use those.
2015-03-29release 1.1.8v1.1.8Rich Felker-1/+16
2015-03-27regex: fix character class repetitionsSzabolcs Nagy-0/+5
Internally regcomp needs to copy some iteration nodes before translating the AST into TNFA representation. Literal nodes were not copied correctly: the class type and list of negated class types were not copied so classes were ignored (in the non-negated case an ignored char class caused the literal to match everything). This affects iterations when the upper bound is finite, larger than one or the lower bound is larger than one. So eg. the EREs [[:digit:]]{2} [^[:space:]ab]{1,4} were treated as .{2} [^ab]{1,4} The fix is done with minimal source modification to copy the necessary fields, but the AST preparation and node handling code of tre will need to be cleaned up for clarity.
2015-03-23do not treat \0 as a backref in BRESzabolcs Nagy-1/+1
The valid BRE backref tokens are \1 .. \9, and 0 is not a special character either so \0 is undefined by the standard. Such undefined escaped characters are treated as literal characters currently, following existing practice, so \0 is the same as 0.
2015-03-23fix FLT_ROUNDS regression in C++ applicationsRich Felker-0/+8
commit 559de8f5f06da9022cbba70e22e14a710eb74513 redefined FLT_ROUNDS to use an external function that can report the actual current rounding mode, rather than always reporting round-to-nearest. however, float.h did not include 'extern "C"' wrapping for C++, so C++ programs using FLT_ROUNDS ended up with an unresolved reference to a name-mangled C++ function __flt_rounds.
2015-03-23fix internal buffer overrun in inet_ptonRich Felker-2/+3
one stop condition for parsing abbreviated ipv6 addressed was missed, allowing the internal ip[] buffer to overflow. this patch adds the missing stop condition and masks the array index so that, in case there are any remaining stop conditions missing, overflowing the buffer is not possible.
2015-03-20suppress backref processing in ERE regcompRich Felker-1/+1
one of the features of ERE is that it's actually a regular language and does not admit expressions which cannot be matched in linear time. introduction of \n backref support into regcomp's ERE parsing was unintentional.
2015-03-20fix memory-corruption in regcomp with backslash followed by high byteRich Felker-1/+1
the regex parser handles the (undefined) case of an unexpected byte following a backslash as a literal. however, instead of correctly decoding a character, it was treating the byte value itself as a character. this was not only semantically unjustified, but turned out to be dangerous on archs where plain char is signed: bytes in the range 252-255 alias the internal codes -4 through -1 used for special types of literal nodes in the AST.
2015-03-20fix missing max_align_t definition on aarch64Rich Felker-0/+2
2015-03-18release 1.1.7v1.1.7Rich Felker-1/+44
2015-03-18fix MINSIGSTKSZ values for archs with large signal contextsRich Felker-2/+50
the previous values (2k min and 8k default) were too small for some archs. aarch64 reserves 4k in the signal context for future extensions and requires about 4.5k total, and powerpc reportedly uses over 2k. the new minimums are chosen to fit the saved context and also allow a minimal signal handler to run. since the default (SIGSTKSZ) has always been 6k larger than the minimum, it is also increased to maintain the 6k usable by the signal handler. this happens to be able to store one pathname buffer and should be sufficient for calling any function in libc that doesn't involve conversion between floating point and decimal representations. x86 (both 32-bit and 64-bit variants) may also need a larger minimum (around 2.5k) in the future to support avx-512, but the values on these archs are left alone for now pending further analysis. the value for PTHREAD_STACK_MIN is not increased to match MINSIGSTKSZ at this time. this is so as not to preclude applications from using extremely small thread stacks when they know they will not be handling signals. unfortunately cancellation and multi-threaded set*id() use signals as an implementation detail and therefore require a stack large enough for a signal context, so applications which use extremely small thread stacks may still need to avoid using these features.
2015-03-16block all signals (even internal ones) in cancellation signal handlerRich Felker-1/+2
previously the implementation-internal signal used for multithreaded set*id operations was left unblocked during handling of the cancellation signal. however, on some archs, signal contexts are huge (up to 5k) and the possibility of nested signal handlers drastically increases the minimum stack requirement. since the cancellation signal handler will do its job and return in bounded time before possibly passing execution to application code, there is no need to allow other signals to interrupt it.
2015-03-16update authors/contributors listRich Felker-0/+8
these additions were made based on scanning commit authors since the last update, at the time of the 1.1.4 release.
2015-03-15avoid sending huge names as nscd passwd/group queriesRich Felker-2/+3
overly long user/group names are potentially a DoS vector and source of other problems like partial writes by sendmsg, and not useful.
2015-03-15simplify nscd lookup code for alt passwd/group backendsRich Felker-15/+15
previously, a sentinel value of (FILE *)-1 was used to inform the caller of __nscd_query that nscd is not in use. aside from being an ugly hack, this resulted in duplicate code paths for two logically equivalent cases: no nscd, and "not found" result from nscd. now, __nscd_query simply skips closing the socket and returns a valid FILE pointer when nscd is not in use, and produces a fake "not found" response header. the caller is then responsible for closing the socket just like it would do if it had gotten a real "not found" response.
2015-03-15add alternate backend support for getgrouplistJosiah Worcester-24/+86
This completes the alternate backend support that was previously added to the getpw* and getgr* functions. Unlike those, though, it unconditionally queries nscd. Any groups from nscd that aren't in the /etc/groups file are added to the returned list, and any that are present in the file are ignored. The purpose of this behavior is to provide a view of the group database consistent with what is observed by the getgr* functions. If group memberships reported by nscd were honored when the corresponding group already has a definition in the /etc/groups file, the user's getgrouplist-based membership in the group would conflict with their non-membership in the reported gr_mem[] for the group. The changes made also make getgrouplist thread-safe and eliminate its clobbering of the global getgrent state.
2015-03-14aarch64: fix typo in bits/ioctl.hSzabolcs Nagy-1/+1
2015-03-14aarch64: add struct _aarch64_ctx to signal.hSzabolcs Nagy-0/+17
The unwind code in libgcc uses this type for unwinding across signal handlers. On aarch64 the kernel may place a sequence of structs on the signal stack on top of the ucontext to provide additional information. The unwinder only needs the header, but added all the types the kernel currently defines for this mechanism because they are part of the uapi.
2015-03-12align x32 pthread type sizes to be common with 32-bit archsRich Felker-4/+4
previously, commit e7b9887e8b65253087ab0b209dc8dd85c9f09614 aligned the sizes with the glibc ABI. subsequent discussion during the merge of the aarch64 port reached a conclusion that we should reject larger arch-specific sizes, which have significant cost and no benefit, and stick with the existing common 32-bit sizes for all 32-bit/ILP32 archs and the x86_64 sizes for 64-bit archs. one peculiarity of this change is that x32 pthread_attr_t is now larger in musl than in the glibc x32 ABI, making it unsafe to call pthread_attr_init from x32 code that was compiled against glibc. with all the ABI issues of x32, it's not clear that ABI compatibility will ever work, but if it's needed, pthread_attr_init and related functions could be modified not to write to the last slot of the object. this is not a regression versus previous releases, since on previous releases the x32 pthread type sizes were all severely oversized already (due to incorrectly using the x86_64 LP64 definitions). moreover, x32 is still considered experimental and not ABI-stable.
2015-03-11add aarch64 portSzabolcs Nagy-0/+2202
This adds complete aarch64 target support including bigendian subarch. Some of the long double math functions are known to be broken otherwise interfaces should be fully functional, but at this point consider this port experimental. Initial work on this port was done by Sireesh Tripurari and Kevin Bortis.
2015-03-11math: add dummy implementations of 128 bit long double functionsSzabolcs Nagy-4/+111
This is in preparation for the aarch64 port only to have the long double math symbols available on ld128 platforms. The implementations should be fixed up later once we have proper tests for these functions. Added bigendian handling for ld128 bit manipulations too.
2015-03-11math: add ld128 exp2l based on the freebsd implementationSzabolcs Nagy-1/+366
Changed the special case handling and bit manipulation to better match the double version.
2015-03-11copy the dtv pointer to the end of the pthread struct for TLS_ABOVE_TP archsSzabolcs Nagy-4/+5
There are two main abi variants for thread local storage layout: (1) TLS is above the thread pointer at a fixed offset and the pthread struct is below that. So the end of the struct is at known offset. (2) the thread pointer points to the pthread struct and TLS starts below it. So the start of the struct is at known (zero) offset. Assembly code for the dynamic TLSDESC callback needs to access the dynamic thread vector (dtv) pointer which is currently at the front of the pthread struct. So in case of (1) the asm code needs to hard code the offset from the end of the struct which can easily break if the struct changes. This commit adds a copy of the dtv at the end of the struct. New members must not be added after dtv_copy, only before it. The size of the struct is increased a bit, but there is opportunity for size optimizations.
2015-03-07fix regression in pthread_cond_wait with cancellation disabledRich Felker-0/+1
due to a logic error in the use of masked cancellation mode, pthread_cond_wait did not honor PTHREAD_CANCEL_DISABLE but instead failed with ECANCELED when cancellation was pending.
2015-03-07fix FLT_ROUNDS to reflect the current rounding modeSzabolcs Nagy-9/+22
Implemented as a wrapper around fegetround introducing a new function to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
2015-03-06fix over-alignment of TLS, insufficient builtin TLS on 64-bit archsRich Felker-4/+16
a conservative estimate of 4*sizeof(size_t) was used as the minimum alignment for thread-local storage, despite the only requirements being alignment suitable for struct pthread and void* (which struct pthread already contains). additional alignment required by the application or libraries is encoded in their headers and is already applied. over-alignment prevented the builtin_tls array from ever being used in dynamic-linked programs on 64-bit archs, thereby requiring allocation at startup even in programs with no TLS of their own.
2015-03-04add legacy functions from sysinfo.h duplicating sysconf functionalityRich Felker-0/+22
2015-03-04fix signed left-shift overflow in pthread_condattr_setpsharedRich Felker-1/+1
2015-03-04add new si_lower and si_upper siginfo_t membersSzabolcs Nagy-0/+7
new in linux v3.19 commit ee1b58d36aa1b5a79eaba11f5c3633c88231da83 used to report intel mpx bound violation information.
2015-03-04declare incomplete type struct itimerspec in timerfd.hRich Felker-0/+2
normally time.h would provide a definition for this struct, but depending on the feature test macros in use, it may not be exposed, leading to warnings when it's used in the function prototypes.
2015-03-04fix preprocessor error introduced in poll.h in last commitRich Felker-1/+1