Age | Commit message (Collapse) | Author | Lines |
|
....to be somewhat consistent and easily comparable with asm/socket.h
Signed-off-by: Roman Yeryomin <roman@ubnt.com>
|
|
Signed-off-by: Roman Yeryomin <roman@ubnt.com>
|
|
glibc and uclibc use gregs instead of regs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
|
|
while it's the same for all presently supported archs, it differs at
least on sparc, and conceptually it's no less arch-specific than the
other O_* macros. O_SEARCH and O_EXEC are still defined in terms of
O_PATH in the main fcntl.h.
|
|
the previous values (2k min and 8k default) were too small for some
archs. aarch64 reserves 4k in the signal context for future extensions
and requires about 4.5k total, and powerpc reportedly uses over 2k.
the new minimums are chosen to fit the saved context and also allow a
minimal signal handler to run.
since the default (SIGSTKSZ) has always been 6k larger than the
minimum, it is also increased to maintain the 6k usable by the signal
handler. this happens to be able to store one pathname buffer and
should be sufficient for calling any function in libc that doesn't
involve conversion between floating point and decimal representations.
x86 (both 32-bit and 64-bit variants) may also need a larger minimum
(around 2.5k) in the future to support avx-512, but the values on
these archs are left alone for now pending further analysis.
the value for PTHREAD_STACK_MIN is not increased to match MINSIGSTKSZ
at this time. this is so as not to preclude applications from using
extremely small thread stacks when they know they will not be handling
signals. unfortunately cancellation and multi-threaded set*id() use
signals as an implementation detail and therefore require a stack
large enough for a signal context, so applications which use extremely
small thread stacks may still need to avoid using these features.
|
|
Implemented as a wrapper around fegetround introducing a new function
to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
|
|
these macros have the same distinct definition on blackfin, frv, m68k,
mips, sparc and xtensa kernels. POLLMSG and POLLRDHUP additionally
differ on sparc.
|
|
the memory model we use internally for atomics permits plain loads of
values which may be subject to concurrent modification without
requiring that a special load function be used. since a compiler is
free to make transformations that alter the number of loads or the way
in which loads are performed, the compiler is theoretically free to
break this usage. the most obvious concern is with atomic cas
constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be
transformed to a_cas(p,*p,f(*p)); where the latter is intended to show
multiple loads of *p whose resulting values might fail to be equal;
this would break the atomicity of the whole operation. but even more
fundamental breakage is possible.
with the changes being made now, objects that may be modified by
atomics are modeled as volatile, and the atomic operations performed
on them by other threads are modeled as asynchronous stores by
hardware which happens to be acting on the request of another thread.
such modeling of course does not itself address memory synchronization
between cores/cpus, but that aspect was already handled. this all
seems less than ideal, but it's the best we can do without mandating a
C11 compiler and using the C11 model for atomics.
in the case of pthread_once_t, the ABI type of the underlying object
is not volatile-qualified. so we are assuming that accessing the
object through a volatile-qualified lvalue via casts yields volatile
access semantics. the language of the C standard is somewhat unclear
on this matter, but this is an assumption the linux kernel also makes,
and seems to be the correct interpretation of the standard.
|
|
this syscall allows fexecve to be implemented without /proc, it is new
in linux v3.19, added in commit 51f39a1f0cea1cacf8c787f652f26dfee9611874
(sh and microblaze do not have allocated syscall numbers yet)
added a x32 fix as well: the io_setup and io_submit syscalls are no
longer common with x86_64, so use the x32 specific numbers.
|
|
the definitions are generic for all kernel archs. exposure of these
macros now only occurs on the same feature test as for the function
accepting them, which is believed to be more correct.
|
|
the errno values are unused by the kernel and the macro definitions were
never exposed by glibc.
|
|
these syscalls are new in linux v3.18, bpf is present on all
supported archs except sh, kexec_file_load is only allocted for
x86_64 and x32 yet.
bpf was added in linux commit 99c55f7d47c0dc6fc64729f37bf435abf43f4c60
kexec_file_load syscall number was allocated in commit
f0895685c7fd8c938c91a9d8a6f7c11f22df58d2
|
|
|
|
these syscalls are new in linux v3.17 and present on all supported
archs except sh.
seccomp was added in commit 48dc92b9fc3926844257316e75ba11eb5c742b2c
it has operation, flags and pointer arguments (if flags==0 then it is
the same as prctl(PR_SET_SECCOMP,...)), the uapi header for flag
definitions is linux/seccomp.h
getrandom was added in commit c6e9d6f38894798696f23c8084ca7edbf16ee895
it provides an entropy source when open("/dev/urandom",..) would fail,
the uapi header for flags is linux/random.h
memfd_create was added in commit 9183df25fe7b194563db3fec6dc3202a5855839c
it allows anon mmap to have an fd, that can be shared, sealed and needs no
mount point, the uapi header for flags is linux/memfd.h
|
|
based on patch by Jens Gustedt.
mtx_t and cnd_t are defined in such a way that they are formally
"compatible types" with pthread_mutex_t and pthread_cond_t,
respectively, when accessed from a different translation unit. this
makes it possible to implement the C11 functions using the pthread
functions (which will dereference them with the pthread types) without
having to use the same types, which would necessitate either namespace
violations (exposing pthread type names in threads.h) or incompatible
changes to the C++ name mangling ABI for the pthread types.
for the rest of the types, things are much simpler; using identical
types is possible without any namespace considerations.
|
|
unfortunately this needs to be able to vary by arch, because of a huge
mess GCC made: the GCC definition, which became the ABI, depends on
quirks in GCC's definition of __alignof__, which does not match the
formal alignment of the type.
GCC's __alignof__ unexpectedly exposes the an implementation detail,
its "preferred alignment" for the type, rather than the formal/ABI
alignment of the type, which it only actually uses in structures. on
most archs the two values are the same, but on some (at least i386)
the preferred alignment is greater than the ABI alignment.
I considered using _Alignas(8) unconditionally, but on at least one
arch (or1k), the alignment of max_align_t with GCC's definition is
only 4 (even the "preferred alignment" for these types is only 4).
|
|
when manipulating the robust list, the order of stores matters,
because the code may be asynchronously interrupted by a fatal signal
and the kernel will then access the robust list in what is essentially
an async-signal context.
previously, aliasing considerations made it seem unlikely that a
compiler could reorder the stores, but proving that they could not be
reordered incorrectly would have been extremely difficult. instead
I've opted to make all the pointers used as part of the robust list,
including those in the robust list head and in the individual mutexes,
volatile.
in addition, the format of the robust list has been changed to point
back to the head at the end, rather than ending with a null pointer.
this is to match the documented kernel robust list ABI. the null
pointer, which was previously used, only worked because faults during
access terminate the robust list processing.
|
|
it's like rename but with flags eg. to allow atomic exchange of two files,
introduced in linux 3.15 commit 520c8b16505236fc82daa352e6c5e73cd9870cff
|
|
linux 3.14 introduced sched_getattr and sched_setattr syscalls in
commit d50dde5a10f305253cbc3855307f608f8a3c5f73
and the related SCHED_DEADLINE scheduling policy in
commit aab03e05e8f7e26f51dee792beddcb5cca9215a5
but struct sched_attr "extended scheduling parameters data structure"
is not yet exported to userspace (necessary for using the syscalls)
so related uapi definitions are not added yet.
|
|
|
|
The mips arch is special in that it uses different RLIMIT_
numbers than other archs, so allow bits/resource.h to override
the default RLIMIT_ numbers (empty on all archs except mips).
Reported by orc.
|
|
in the previous changes, I missed the fact that both the prototype of
the sigaltstack function and the definition of ucontext_t depend on
stack_t.
|
|
like almost everything on mips, this is gratuitously different.
|
|
it's different at least on mips. mips version will be fixed in a
separate commit to show the change.
|
|
the excess space was unused and unintentional. this change does not
affect the ABI between applications and libc. while it does
theoretically affect linkage between third-party translation units
using jmp_buf as part of a structure, we've already changed jmp_buf at
least once on all archs, and problems were never observed, likely
because such usage would be very unusual. in any case it's best to get
things right now rather than making changes sometime during the 1.0.x
series or later.
|
|
this seems to have been copied erroneously from the arm version of the
file. it's fairly harmless but it's a mistake and better to fix now
than later.
|
|
The mips statfs struct layout is different than on other archs, so the
statfs, fstatfs, statvfs and fstatvfs APIs were broken on mips.
Now the ordering is fixed, the types are kept consistent with other archs.
|
|
This used to be broken when all archs had the same semid_ds definition:
there is no padding around the time_t members on mips.
|
|
the definition was found to be incorrect at least for powerpc, and
fixing this cleanly requires making the definition arch-specific. this
will allow cleaning up the definition for other archs to make it more
specific, and reversing some of the ugliness (time_t hacks) introduced
with the x32 port.
this first commit simply copies the existing definition to each arch
without any changes. this is intentional, to make it easier to review
changes made on a per-arch basis.
|
|
Userspace emulated floating-point (gcc -msoft-float) is not compatible
with the default mips abi (assumes an FPU or in kernel emulation of it).
Soft vs hard float abi should not be mixed, __mips_soft_float is checked
in musl's configure script and there is no runtime check. The -sf subarch
does not save/restore floating-point registers in setjmp/longjmp and only
provides dummy fenv implementation.
|
|
|
|
the fix should be complete on archs that use the generic definitions
(i386, arm, x86_64, microblaze), but mips and powerpc have not been
checked thoroughly and may need more fixes.
|
|
definition in linux:
#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
where __O_TMPFILE and O_DIRECTORY are arch specific
|
|
previously these macros wrongly had type double rather than long
double. I see no way an application could detect the error in C99, but
C11's _Generic can trivially detect it.
at the same time, even though these archs do not have excess
precision, the number of decimal places used to represent these
constants has been increased to 21 to be consistent with the decimal
representations used for the DBL_* macros.
|
|
|
|
PAGE_SIZE was hardcoded to 4096, which is historically what most
systems use, but on several archs it is a kernel config parameter,
user space can only know it at execution time from the aux vector.
PAGE_SIZE and PAGESIZE are not defined on archs where page size is
a runtime parameter, applications should use sysconf(_SC_PAGE_SIZE)
to query it. Internally libc code defines PAGE_SIZE to libc.page_size,
which is set to aux[AT_PAGESZ] in __init_libc and early in __dynlink
as well. (Note that libc.page_size can be accessed without GOT, ie.
before relocations are done)
Some fpathconf settings are hardcoded to 4096, these should be actually
queried from the filesystem using statfs.
|
|
msg.h was wrong for big-endian (wrong endiannness padding).
shm.h was just plain wrong (mips is not supposed to have padding).
both changes were tested using libc-test on qemu-system-mips.
|
|
a mips signal mask contains 128 bits, enough for signals 1 through
128. however, the exit status obtained from the wait-family functions
only has room for values up to 127. reportedly signal 128 was causing
kernelspace bugs, so it was removed from the kernel recently; even
without that issue, however, it was impossible to support it correctly
in userspace.
at the same time, the bug was masked on musl by SIGRTMAX incorrectly
yielding 64 on mips, rather than the "correct" value of 128. now that
the _NSIG issue is fixed, SIGRTMAX can be fixed at the same time,
exposing the full range of signals for application use.
note that the (nonstandardized) libc _NSIG value is actually one
greater than the max signal number, and also one greater than the
kernel headers' idea of _NSIG. this is the reason for the discrepency
with the recent kernel changes. since reducing _NSIG by one brought it
down from 129 to 128, rather than from 128 to 127, _NSIG/8, used
widely in the musl sources, is unchanged.
|
|
this is necessary to meet the C++ ABI target. alternatives were
considered to avoid the size increase for non-sig jmp_buf objects, but
they seemed to have worse properties. moreover, the relative size
increase is only extreme on x86[_64]; one way of interpreting this is
that, if the size increase from this patch makes jmp_buf use too much
memory, then the program was already using too much memory when built
for non-x86 archs.
|
|
i386 was done with the big commit but I missed the others
|
|
rather than moving nlink_t back to the arch-specific file, I've added
a macro _Reg defined to the canonical type for register-size values on
the arch. this is not the same as _Addr for (not-yet-supported)
32-on-64 pseudo-archs like x32 and mips n32, so a new macro was
needed.
|
|
aside from the obvious C++ ABI purpose for this change, it also brings
musl into alignment with the compiler's idea of the definition of
wint_t (use in -Wformat), and makes the situation less awkward on ARM,
where wchar_t is unsigned.
internal code using wint_t and WEOF was checked against this change,
and while a few cases of storing WEOF into wchar_t were found, they
all seem to operate properly with the natural conversion from unsigned
to signed.
|
|
the arch-specific bits/alltypes.h.sh has been replaced with a generic
alltypes.h.in and minimal arch-specific bits/alltypes.h.in.
this commit is intended to have no functional changes except:
- exposing additional symbols that POSIX allows but does not require
- changing the C++ name mangling for some types
- fixing the signedness of blksize_t on powerpc (POSIX requires signed)
- fixing the limit macros for sig_atomic_t on x86_64
- making dev_t an unsigned type (ABI matching goal, and more logical)
in addition, some types that were wrongly defined with long on 32-bit
archs were changed to int, and vice versa; this change is
non-functional except for the possibility of making pointer types
mismatch, and only affects programs that were using them incorrectly,
and only at build-time, not runtime.
the following changes were made in the interest of moving
non-arch-specific types out of the alltypes system and into the
headers they're associated with, and also will tend to improve
application compatibility:
- netdb.h now includes netinet/in.h (for socklen_t and uint32_t)
- netinet/in.h now includes sys/socket.h and inttypes.h
- sys/resource.h now includes sys/time.h (for struct timeval)
- sys/wait.h now includes signal.h (for siginfo_t)
- langinfo.h now includes nl_types.h (for nl_item)
for the types in stdint.h:
- types which are of no interest to other headers were moved out of
the alltypes system.
- fast types for 8- and 64-bit are hard-coded (at least for now); only
the 16- and 32-bit ones have reason to vary by arch.
and the following types have been changed for C++ ABI purposes;
- mbstate_t now has a struct tag, __mbstate_t
- FILE's struct tag has been changed to _IO_FILE
- DIR's struct tag has been changed to __dirstream
- locale_t's struct tag has been changed to __locale_struct
- pthread_t is defined as unsigned long in C++ mode only
- fpos_t now has a struct tag, _G_fpos64_t
- fsid_t's struct tag has been changed to __fsid_t
- idtype_t has been made an enum type (also required by POSIX)
- nl_catd has been changed from long to void *
- siginfo_t's struct tag has been removed
- sigset_t's has been given a struct tag, __sigset_t
- stack_t has been given a struct tag, sigaltstack
- suseconds_t has been changed to long on 32-bit archs
- [u]intptr_t have been changed from long to int rank on 32-bit archs
- dev_t has been made unsigned
summary of tests that have been performed against these changes:
- nsz's libc-test (diff -u before and after)
- C++ ABI check symbol dump (diff -u before, after, glibc)
- grepped for __NEED, made sure types needed are still in alltypes
- built gcc 3.4.6
|
|
this change is both to fix one of the remaining type (and thus C++
ABI) mismatches with glibc/LSB and to allow use of the full range of
uid and gid values, if so desired.
passwd/group access functions were not prepared to deal with unsigned
values, so they too have been fixed with this commit.
|
|
despite declaring functions that take arguments of type va_list, these
headers are not permitted by the c standard to expose the definition
of va_list, so an alias for the type must be used. the name
__isoc_va_list was chosen to convey that the purpose of this alternate
name is for iso c conformance, and to avoid the multitude of names
which gcc mangles with its hideous "fixincludes" monstrosity, leading
to serious header breakage if these "fixes" are run.
|
|
|
|
|
|
previously we were using an unsigned type on 32-bit systems so that
subtraction would be well-defined when it wrapped, but since wrapping
is non-conforming anyway (when clock() overflows, it has to return -1)
the only use of unsigned would be to buy a little bit more time before
overflow. this does not seem worth having the type vary per-arch
(which leads to more arch-specific bugs) or disagree with the ABI musl
(mostly) follows.
|
|
there was some question as to how many decimal places to use, since
one decimal place is always sufficient to identify the smallest
denormal uniquely. for now, I'm following the example in the C
standard which is consistent with the other min/max macros we already
had in place.
|
|
|