summaryrefslogtreecommitdiff
path: root/arch/or1k/bits
AgeCommit message (Collapse)AuthorLines
2019-07-30move IPC_64 from public bits/ipc.h to syscall_arch.hRich Felker-2/+0
the definition of the IPC_64 macro controls the interface between libc and the kernel through syscalls; it's not a public API. the meaning is rather obscure. long ago, Linux's sysvipc *id_ds structures used 16-bit uids/gids and wrong types for a few other fields. this was in the libc5 era, before glibc. the IPC_64 flag (64 is a misnomer; it's more like 32) tells the kernel to use the modern[-ish] versions of the structures. the definition of IPC_64 has nothing to do with whether the arch is 32- or 64-bit. rather, due to either historical accident or intentional obnoxiousness, the kernel only accepts and masks off the 0x100 IPC_64 flag conditional on CONFIG_ARCH_WANT_IPC_PARSE_VERSION, i.e. for archs that want to provide, or that accidentally provided, both. for archs which don't define this option, no masking is performed and commands with the 0x100 bit set will fail as invalid. so ultimately, the definition is just a matter of matching an arbitrary switch defined per-arch in the kernel.
2019-07-29collapse out byte order conditions in bits/sem.h for fixed-endian archsRich Felker-5/+0
having preprocessor conditionals on byte order in the bits headers for fixed-endian archs is confusing at best. remove them.
2019-07-29duplicate generic bits/sem.h for each arch using it, in prep to changeRich Felker-0/+16
2019-07-29remove trailing newlines from various versions of bits/shm.hRich Felker-1/+0
2019-07-29duplicate generic bits/shm.h for each arch using it, in prep to changeRich Felker-0/+28
there are more archs sharing the generic 64-bit version of the struct, which is uniform and much more reasonable, than sharing the current "generic" one, and depending on how time64 sysvipc is done for 32-bit archs, even more may be sharing the "64-bit version" in the future. so, duplicate the current generic to all archs using it (arm, i386, m68k, microblaze, or1k) so that the generic can be changed freely. this is recorded as its own commit mainly as a hint to git tooling, to assist in copy/move tracking.
2019-07-01add new syscall numbers from linux v5.1Szabolcs Nagy-0/+24
syscall numbers are now synced up across targets (starting from 403 the numbers are the same on all targets other than an arch specific offset) IPC syscalls sem*, shm*, msg* got added where they were missing (except for semop: only semtimedop got added), the new semctl, shmctl, msgctl imply IPC_64, see linux commit 0d6040d4681735dfc47565de288525de405a5c99 arch: add split IPC system calls where needed new 64bit time_t syscall variants got added on 32bit targets, see linux commit 48166e6ea47d23984f0b481ca199250e1ce0730a y2038: add 64-bit time_t syscalls to all 32-bit architectures new async io syscalls got added, see linux commit 2b188cc1bb857a9d4701ae59aa7768b5124e262e Add io_uring IO interface linux commit edafccee56ff31678a091ddb7219aba9b28bc3cb io_uring: add support for pre-mapped user IO buffers a new syscall got added that uses the fd of /proc/<pid> as a stable handle for processes: allows sending signals without pid reuse issues, intended to eventually replace rt_sigqueueinfo, kill, tgkill and rt_tgsigqueueinfo, see linux commit 3eb39f47934f9d5a3027fe00d906a45fe3a15fad signal: add pidfd_send_signal() syscall on some targets (arm, m68k, s390x, sh) some previously missing syscall numbers got added as well.
2019-03-13aarch64, or1k: add kexec_file_load syscall number from linux v5.0Szabolcs Nagy-0/+1
added in linux commit 4e21565b7fd4d9045765f697887e74a704135fe2
2019-03-13aarch64, or1k: define rseq syscall number following linux v4.19Szabolcs Nagy-0/+1
added in linux commit db7a2d1809a5b6b08d138ff68837f805fc073351
2018-12-09add io_pgetevents and rseq syscall numbers from linux v4.18Szabolcs Nagy-0/+1
io_pgetevents is new in linux commit 7a074e96dee62586c935c80cecd931431bfdd0be rseq is new in linux commit d7822b1e24f2df5df98c76f0e94a5416349ff759
2018-03-10reverse definition dependency between PAGESIZE and PAGE_SIZERich Felker-1/+1
PAGESIZE is actually the version defined in POSIX base, with PAGE_SIZE being in the XSI option. use PAGESIZE as the underlying definition to facilitate making exposure of PAGE_SIZE conditional.
2017-11-05add statx syscall numbers from linux v4.11Szabolcs Nagy-0/+1
statx was added in linux commit a528d35e8bfcc521d7cb70aaf03e1bd296c8493f (there is no libc wrapper yet and microblaze and sh misses the number).
2017-09-06make syscall.h consistent with linuxSzabolcs Nagy-0/+1
most of the found naming differences don't matter to musl, because internally it unifies the syscall names that vary across targets, but for external code the names should match the kernel uapi. aarch64: __NR_fstatat is called __NR_newfstatat in linux. __NR_or1k_atomic got mistakenly copied from or1k. arm: __NR_arm_sync_file_range is an alias for __NR_sync_file_range2 __NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux, the old non-arm name is kept too, it should not cause issues. (powerpc has similar nonstandard fadvise and it uses the normal name.) i386: __NR_madvise1 was removed from linux in commit 303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11 microblaze: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite had different name in linux. mips: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select had different name in linux. mipsn32: __NR_fstatat is called __NR_newfstatat in linux. or1k: __NR__llseek is called __NR_llseek in linux. the old name is kept too because that's the name musl uses internally. powerpc: __NR_{get,set}res{gid,uid}32 was never present in powerpc linux. __NR_timerfd was briefly defined in linux but then got renamed.
2016-12-29add pkey_{mprotect,alloc,free} syscalls from linux v4.9Szabolcs Nagy-0/+3
see linux commit e8c24d3a23a469f1f40d4de24d872ca7023ced0a and linux Documentation/x86/protection-keys.txt
2016-07-06remove or1k version of sem.hBobby Bingham-11/+0
It's identical to the generic version, after evaluating the endian preprocessor checks in the generic version.
2016-06-09add preadv2 and pwritev2 syscall numbers for linux v4.6Szabolcs Nagy-0/+2
the syscalls take an additional flag argument, they were added in commit f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09. the syscall is not allocated for microblaze and sh yet.
2016-05-12deduplicate __NR_* and SYS_* syscall number definitionsBobby Bingham-543/+272
2016-03-19add copy_file_range syscall numbers from linux v4.5Szabolcs Nagy-0/+2
it was introduced for offloading copying between regular files in linux commit 29732938a6289a15e907da234d6692a2ead71855 (microblaze and sh does not yet have the syscall number.)
2016-03-18deduplicate bits/mman.hSzabolcs Nagy-59/+0
currently five targets use the same mman.h constants and the rest share most constants too, so move them to sys/mman.h before the bits/mman.h include where the differences can be corrected by redefinition of the macros. this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most targets (it should be the same as MADV_DONTNEED), and sh defined the x86-only MAP_32BIT mmap flag.
2016-01-27deduplicate the bulk of the arch bits headersRich Felker-593/+0
all bits headers that were identical for a number of 'clean' archs are moved to the new arch/generic tree. in addition, a few headers that differed only cosmetically from the new generic version are removed. additional deduplication may be possible in mman.h and in several headers (limits.h, posix.h, stdint.h) that mostly depend on whether the arch is 32- or 64-bit, but they are left alone for now because greater gains are likely possible with more invasive changes to header logic, which is beyond the scope of this commit.
2016-01-26add MCL_ONFAULT and MLOCK_ONFAULT mlockall and mlock2 flagsSzabolcs Nagy-0/+1
they lock faulted pages into memory (useful when a small part of a large mapped file needs efficient access), new in linux v4.4, commit b0f205c2a3082dd9081f9a94e50658c5fa906ff1 MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
2016-01-26add mlock2 syscall number from linux v4.4Szabolcs Nagy-0/+2
this is mlock with a flags argument, new in linux commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e as usual microblaze and sh don't have allocated syscall number yet.
2016-01-26add new membarrier, userfaultfd and switch_endian syscallsSzabolcs Nagy-0/+4
new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc, x32 and x86_64. membarrier is a system wide memory barrier, moves most of the synchronization cost to one side, new in kernel commit 5b25b13ab08f616efd566347d809b4ece54570d1 userfaultfd is useful for qemu and is new in kernel commit 8d2afd96c20316d112e04d935d9e09150e988397 switch_endian is powerpc only for switching endianness, new in commit 529d235a0e190ded1d21ccc80a73e625ebcad09b
2015-04-01move O_PATH definition back to arch bitsRich Felker-0/+1
while it's the same for all presently supported archs, it differs at least on sparc, and conceptually it's no less arch-specific than the other O_* macros. O_SEARCH and O_EXEC are still defined in terms of O_PATH in the main fcntl.h.
2015-03-18fix MINSIGSTKSZ values for archs with large signal contextsRich Felker-0/+5
the previous values (2k min and 8k default) were too small for some archs. aarch64 reserves 4k in the signal context for future extensions and requires about 4.5k total, and powerpc reportedly uses over 2k. the new minimums are chosen to fit the saved context and also allow a minimal signal handler to run. since the default (SIGSTKSZ) has always been 6k larger than the minimum, it is also increased to maintain the 6k usable by the signal handler. this happens to be able to store one pathname buffer and should be sufficient for calling any function in libc that doesn't involve conversion between floating point and decimal representations. x86 (both 32-bit and 64-bit variants) may also need a larger minimum (around 2.5k) in the future to support avx-512, but the values on these archs are left alone for now pending further analysis. the value for PTHREAD_STACK_MIN is not increased to match MINSIGSTKSZ at this time. this is so as not to preclude applications from using extremely small thread stacks when they know they will not be handling signals. unfortunately cancellation and multi-threaded set*id() use signals as an implementation detail and therefore require a stack large enough for a signal context, so applications which use extremely small thread stacks may still need to avoid using these features.
2015-03-07fix FLT_ROUNDS to reflect the current rounding modeSzabolcs Nagy-1/+0
Implemented as a wrapper around fegetround introducing a new function to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
2015-03-04fix POLLWRNORM and POLLWRBAND on mipsTrutz Behn-0/+0
these macros have the same distinct definition on blackfin, frv, m68k, mips, sparc and xtensa kernels. POLLMSG and POLLRDHUP additionally differ on sparc.
2015-03-03make all objects used with atomic operations volatileRich Felker-7/+7
the memory model we use internally for atomics permits plain loads of values which may be subject to concurrent modification without requiring that a special load function be used. since a compiler is free to make transformations that alter the number of loads or the way in which loads are performed, the compiler is theoretically free to break this usage. the most obvious concern is with atomic cas constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be transformed to a_cas(p,*p,f(*p)); where the latter is intended to show multiple loads of *p whose resulting values might fail to be equal; this would break the atomicity of the whole operation. but even more fundamental breakage is possible. with the changes being made now, objects that may be modified by atomics are modeled as volatile, and the atomic operations performed on them by other threads are modeled as asynchronous stores by hardware which happens to be acting on the request of another thread. such modeling of course does not itself address memory synchronization between cores/cpus, but that aspect was already handled. this all seems less than ideal, but it's the best we can do without mandating a C11 compiler and using the C11 model for atomics. in the case of pthread_once_t, the ABI type of the underlying object is not volatile-qualified. so we are assuming that accessing the object through a volatile-qualified lvalue via casts yields volatile access semantics. the language of the C standard is somewhat unclear on this matter, but this is an assumption the linux kernel also makes, and seems to be the correct interpretation of the standard.
2015-02-09add syscall numbers for the new execveat syscallSzabolcs Nagy-0/+2
this syscall allows fexecve to be implemented without /proc, it is new in linux v3.19, added in commit 51f39a1f0cea1cacf8c787f652f26dfee9611874 (sh and microblaze do not have allocated syscall numbers yet) added a x32 fix as well: the io_setup and io_submit syscalls are no longer common with x86_64, so use the x32 specific numbers.
2015-01-30move MREMAP_MAYMOVE and MREMAP_FIXED out of bitsTrutz Behn-3/+0
the definitions are generic for all kernel archs. exposure of these macros now only occurs on the same feature test as for the function accepting them, which is believed to be more correct.
2014-12-23add new syscall numbers for bpf and kexec_file_loadSzabolcs Nagy-0/+2
these syscalls are new in linux v3.18, bpf is present on all supported archs except sh, kexec_file_load is only allocted for x86_64 and x32 yet. bpf was added in linux commit 99c55f7d47c0dc6fc64729f37bf435abf43f4c60 kexec_file_load syscall number was allocated in commit f0895685c7fd8c938c91a9d8a6f7c11f22df58d2
2014-12-21move wint_t definition to the shared part of alltypes.h.inRich Felker-1/+0
2014-10-08add new syscall numbers for seccomp, getrandom, memfd_createSzabolcs Nagy-0/+6
these syscalls are new in linux v3.17 and present on all supported archs except sh. seccomp was added in commit 48dc92b9fc3926844257316e75ba11eb5c742b2c it has operation, flags and pointer arguments (if flags==0 then it is the same as prctl(PR_SET_SECCOMP,...)), the uapi header for flag definitions is linux/seccomp.h getrandom was added in commit c6e9d6f38894798696f23c8084ca7edbf16ee895 it provides an entropy source when open("/dev/urandom",..) would fail, the uapi header for flags is linux/random.h memfd_create was added in commit 9183df25fe7b194563db3fec6dc3202a5855839c it allows anon mmap to have an fd, that can be shared, sealed and needs no mount point, the uapi header for flags is linux/memfd.h
2014-09-06add threads.h and needed per-arch types for mtx_t and cnd_tRich Felker-0/+2
based on patch by Jens Gustedt. mtx_t and cnd_t are defined in such a way that they are formally "compatible types" with pthread_mutex_t and pthread_cond_t, respectively, when accessed from a different translation unit. this makes it possible to implement the C11 functions using the pthread functions (which will dereference them with the pthread types) without having to use the same types, which would necessitate either namespace violations (exposing pthread type names in threads.h) or incompatible changes to the C++ name mangling ABI for the pthread types. for the rest of the types, things are much simpler; using identical types is possible without any namespace considerations.
2014-08-20add max_align_t definition for C11 and C++11Rich Felker-0/+2
unfortunately this needs to be able to vary by arch, because of a huge mess GCC made: the GCC definition, which became the ABI, depends on quirks in GCC's definition of __alignof__, which does not match the formal alignment of the type. GCC's __alignof__ unexpectedly exposes the an implementation detail, its "preferred alignment" for the type, rather than the formal/ABI alignment of the type, which it only actually uses in structures. on most archs the two values are the same, but on some (at least i386) the preferred alignment is greater than the ABI alignment. I considered using _Alignas(8) unconditionally, but on at least one arch (or1k), the alignment of max_align_t with GCC's definition is only 4 (even the "preferred alignment" for these types is only 4).
2014-08-17make pointers used in robust list volatileRich Felker-1/+1
when manipulating the robust list, the order of stores matters, because the code may be asynchronously interrupted by a fatal signal and the kernel will then access the robust list in what is essentially an async-signal context. previously, aliasing considerations made it seem unlikely that a compiler could reorder the stores, but proving that they could not be reordered incorrectly would have been extremely difficult. instead I've opted to make all the pointers used as part of the robust list, including those in the robust list head and in the individual mutexes, volatile. in addition, the format of the robust list has been changed to point back to the head at the end, rather than ending with a null pointer. this is to match the documented kernel robust list ABI. the null pointer, which was previously used, only worked because faults during access terminate the robust list processing.
2014-07-30provide PAGE_SIZE as a constant value of 8192 on or1kRich Felker-0/+1
according to Stefan Kristiansson, or1k page size is not actually variable and the value of 8192 is part of the ABI.
2014-07-20add syscall numbers for the new renameat2 syscallSzabolcs Nagy-0/+6
it's like rename but with flags eg. to allow atomic exchange of two files, introduced in linux 3.15 commit 520c8b16505236fc82daa352e6c5e73cd9870cff
2014-07-18add or1k (OpenRISC 1000) architecture portStefan Kristiansson-0/+1386
With the exception of a fenv implementation, the port is fully featured. The port has been tested in or1ksim, the golden reference functional simulator for OpenRISC 1000. It passes all libc-test tests (except the math tests that requires a fenv implementation). The port assumes an or1k implementation that has support for atomic instructions (l.lwa/l.swa). Although it passes all the libc-test tests, the port is still in an experimental state, and has yet experienced very little 'real-world' use.
generated by cgit v1.2.1 (git 2.18.0) at 2024-04-16 14:41:29 +0000