| Age | Commit message (Collapse) | Author | Lines |
|---|
|
this will allow the compiler to cache and reuse the result, meaning we
no longer have to take care not to load it more than once for the sake
of archs where the load may be expensive.
depends on commit 1c84c99913bf1cd47b866ed31e665848a0da84a2 for
correctness, since otherwise the compiler could hoist loads during
stage 3 of dynamic linking before the initial thread-pointer setup.
|
|
these were overlooked in the declarations overhaul work because they
are not properly declared, and the current framework even allows their
declared types to vary by arch. at some point this should be cleaned
up, but I'm not sure what the right way would be.
|
|
sys/ptrace.h is target specific, use bits/ptrace.h to add target
specific macro definitions.
these macros are kept in the generic sys/ptrace.h even though some
targets don't support them:
PTRACE_GETREGS
PTRACE_SETREGS
PTRACE_GETFPREGS
PTRACE_SETFPREGS
PTRACE_GETFPXREGS
PTRACE_SETFPXREGS
so no macro definition got removed in this patch on any target. only
s390x has a numerically conflicting macro definition (PTRACE_SINGLEBLOCK).
the PT_ aliases follow glibc headers, otherwise the definitions come
from linux uapi headers except ones that are skipped in glibc and
there is no real kernel support (s390x PTRACE_*_AREA) or need special
type definitions (mips PTRACE_*_WATCH_*) or only relevant for linux
2.4 compatibility (PTRACE_OLDSETOPTIONS).
|
|
align with commit c9c2cd3e6955cb1d57b8be01d4b072bf44058762.
|
|
PAGESIZE is actually the version defined in POSIX base, with PAGE_SIZE
being in the XSI option. use PAGESIZE as the underlying definition to
facilitate making exposure of PAGE_SIZE conditional.
|
|
statx was added in linux commit a528d35e8bfcc521d7cb70aaf03e1bd296c8493f
(there is no libc wrapper yet and microblaze and sh misses the number).
|
|
counts leading zero bits of a 64bit int, undefined on zero input.
(has nothing to do with atomics, added to atomic.h so target specific
helper functions are together.)
there is a logarithmic generic implementation and another in terms of
a 32bit a_clz_32 on targets where that's available.
|
|
when _GNU_SOURCE is defined, which is always the case when compiling
c++ with gcc, these macros for the the indices in gregset_t are
exposed and likely to clash with applications. by using enum constants
rather than macros defined with integer literals, we can make the
clash slightly less likely to break software. the macros are still
defined in case anything checks for them with #ifdef, but they're
defined to expand to themselves so that non-file-scope (e.g.
namespaced) identifiers by the same names still work.
for the sake of avoiding mistakes, the changes were generated with sed
via the command:
sed -i -e 's/#define *\(REG_[A-Z_0-9]\{1,\}\) *\([0-9]\{1,\}\)'\
'/enum { \1 = \2 };\n#define \1 \1/' \
arch/i386/bits/signal.h arch/x86_64/bits/signal.h arch/x32/bits/signal.h
|
|
see linux commit e8c24d3a23a469f1f40d4de24d872ca7023ced0a
and linux Documentation/x86/protection-keys.txt
|
|
gdb can only backtrace/unwind across signal handlers if it recognizes
the sa_restorer trampoline. for x86_64, gdb first attempts to
determine the symbol name for the function in which the program
counter resides and match it against "__restore_rt". if no name can be
found (e.g. in the case of a stripped binary), the exact instruction
sequence is matched instead.
when matching the function name, however, gdb's unwind code wrongly
considers the interval [sym,sym+size] rather than [sym,sym+size).
thus, if __restore_rt begins immediately after another function, gdb
wrongly identifies pc as lying within the previous adjacent function.
this patch adds a nop before __restore_rt to preclude that
possibility. it also removes the symbol name __restore and replaces it
with a macro since the stability of whether gdb identifies the
function as __restore_rt or __restore is not clear.
for the no-symbols case, the instruction sequence is changed to use
%rax rather than %eax to match what gdb expects.
based on patch by Szabolcs Nagy, with extended description and
corresponding x32 changes added.
|
|
commit befa5866ee30d09c0c96e88af2eabff5911342ea performed this change
for struct definitions that did not also involve typedef, but omitted
the latter.
|
|
placing the opening brace on the same line as the struct keyword/tag
is the style I prefer and seems to be the prevailing practice in more
recent additions.
these changes were generated by the command:
find include/ arch/*/bits -name '*.h' \
-exec sed -i '/^struct [^;{]*$/{N;s/\n/ /;}' {} +
and subsequently checked by hand to ensure that the regex did not pick
up any false positives.
|
|
they were slightly different in musl, but should be the same:
the linux uapi and glibc headers are not different.
|
|
the syscalls take an additional flag argument, they were added in commit
f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint
flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09.
the syscall is not allocated for microblaze and sh yet.
|
|
|
|
commits e24984efd5c6ac5ea8e6cb6cd914fa8435d458bc and
16b55298dc4b6a54d287d7494e04542667ef8861 inadvertently disabled the
a_spin implementations for i386, x86_64, and x32 by defining a macro
named a_pause instead of a_spin. this should not have caused any
functional regression, but it inhibited cpu relaxation while spinning
for locks.
bug reported by George Kulakowski.
|
|
it was introduced for offloading copying between regular files
in linux commit 29732938a6289a15e907da234d6692a2ead71855
(microblaze and sh does not yet have the syscall number.)
|
|
currently five targets use the same mman.h constants and the rest
share most constants too, so move them to sys/mman.h before the
bits/mman.h include where the differences can be corrected by
redefinition of the macros.
this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most
targets (it should be the same as MADV_DONTNEED), and sh defined
the x86-only MAP_32BIT mmap flag.
|
|
This brings the call to an actually usable speed.
Quick unscientific benchmark: 14ns : 102ns :: vDSO : syscall
|
|
all bits headers that were identical for a number of 'clean' archs are
moved to the new arch/generic tree. in addition, a few headers that
differed only cosmetically from the new generic version are removed.
additional deduplication may be possible in mman.h and in several
headers (limits.h, posix.h, stdint.h) that mostly depend on whether
the arch is 32- or 64-bit, but they are left alone for now because
greater gains are likely possible with more invasive changes to header
logic, which is beyond the scope of this commit.
|
|
they lock faulted pages into memory (useful when a small part of a
large mapped file needs efficient access), new in linux v4.4, commit
b0f205c2a3082dd9081f9a94e50658c5fa906ff1
MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
|
|
this is mlock with a flags argument, new in linux commit
a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e
as usual microblaze and sh don't have allocated syscall number yet.
|
|
new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc,
x32 and x86_64.
membarrier is a system wide memory barrier, moves most of the
synchronization cost to one side, new in kernel commit
5b25b13ab08f616efd566347d809b4ece54570d1
userfaultfd is useful for qemu and is new in kernel commit
8d2afd96c20316d112e04d935d9e09150e988397
switch_endian is powerpc only for switching endianness, new in commit
529d235a0e190ded1d21ccc80a73e625ebcad09b
|
|
this commit mostly makes consistent things like spacing, function
ordering in atomic_arch.h, argument names, use of volatile, etc.
a_ctz_l was also removed from x86_64 since atomic.h provides it
automatically using a_ctz_64.
|
|
rather than having each arch provide its own atomic.h, there is a new
shared atomic.h in src/internal which pulls arch-specific definitions
from arc/$(ARCH)/atomic_arch.h. the latter can be extremely minimal,
defining only a_cas or new ll/sc type primitives which the shared
atomic.h will use to construct everything else.
this commit avoids making heavy changes to the individual archs'
atomic implementations. definitions which are identical or
near-identical to what the new shared atomic.h would produce have been
removed, but otherwise the changes made are just hooking up the
arch-specific files to the new infrastructure. major changes to take
advantage of the new system will come in subsequent commits.
|
|
using the actual mcontext_t definition rather than an overlaid pointer
array both improves correctness/readability and eliminates some ugly
hacks for archs with 64-bit registers bit 32-bit program counter.
also fix UB due to comparison of pointers not in a common array
object.
|
|
|
|
commit 3c43c0761e1725fd5f89a9c028cbf43250abb913 fixed missing
synchronization in the atomic store operation for i386 and x86_64, but
opted to use mfence for the barrier on x86_64 where it's always
available. however, in practice mfence is significantly slower than
the barrier approach used on i386 (a nop-like lock orl operation).
this commit changes x86_64 (and x32) to use the faster barrier.
|
|
despite being strongly ordered, the x86 memory model does not preclude
reordering of loads across earlier stores. while a plain store
suffices as a release barrier, we actually need a full barrier, since
users of a_store subsequently load a waiter count to determine whether
to issue a futex wait, and using a stale count will result in soft
(fail-to-wake) deadlocks. these deadlocks were observed in malloc and
possible with stdio locks and other libc-internal locking.
on i386, an atomic operation on the caller's stack is used as the
barrier rather than performing the store itself using xchg; this
avoids the need to read the cache line on which the store is being
performed. mfence is used on x86_64 where it's always available, and
could be used on i386 with the appropriate cpu model checks if it's
shown to perform better.
|
|
conceptually, and on other archs, these functions take a pointer to
int, but in the i386, x86_64, and x32 versions of atomic.h, they took
a pointer to void instead.
|
|
this overhaul further reduces the amount of arch-specific code needed
by the dynamic linker and removes a number of assumptions, including:
- that symbolic function references inside libc are bound at link time
via the linker option -Bsymbolic-functions.
- that libc functions used by the dynamic linker do not require
access to data symbols.
- that static/internal function calls and data accesses can be made
without performing any relocations, or that arch-specific startup
code handled any such relocations needed.
removing these assumptions paves the way for allowing libc.so itself
to be built with stack protector (among other things), and is achieved
by a three-stage bootstrap process:
1. relative relocations are processed with a flat function.
2. symbolic relocations are processed with no external calls/data.
3. main program and dependency libs are processed with a
fully-functional libc/ldso.
reduction in arch-specific code is achived through the following:
- crt_arch.h, used for generating crt1.o, now provides the entry point
for the dynamic linker too.
- asm is no longer responsible for skipping the beginning of argv[]
when ldso is invoked as a command.
- the functionality previously provided by __reloc_self for heavily
GOT-dependent RISC archs is now the arch-agnostic stage-1.
- arch-specific relocation type codes are mapped directly as macros
rather than via an inline translation function/switch statement.
|
|
while it's the same for all presently supported archs, it differs at
least on sparc, and conceptually it's no less arch-specific than the
other O_* macros. O_SEARCH and O_EXEC are still defined in terms of
O_PATH in the main fcntl.h.
|
|
the previous values (2k min and 8k default) were too small for some
archs. aarch64 reserves 4k in the signal context for future extensions
and requires about 4.5k total, and powerpc reportedly uses over 2k.
the new minimums are chosen to fit the saved context and also allow a
minimal signal handler to run.
since the default (SIGSTKSZ) has always been 6k larger than the
minimum, it is also increased to maintain the 6k usable by the signal
handler. this happens to be able to store one pathname buffer and
should be sufficient for calling any function in libc that doesn't
involve conversion between floating point and decimal representations.
x86 (both 32-bit and 64-bit variants) may also need a larger minimum
(around 2.5k) in the future to support avx-512, but the values on
these archs are left alone for now pending further analysis.
the value for PTHREAD_STACK_MIN is not increased to match MINSIGSTKSZ
at this time. this is so as not to preclude applications from using
extremely small thread stacks when they know they will not be handling
signals. unfortunately cancellation and multi-threaded set*id() use
signals as an implementation detail and therefore require a stack
large enough for a signal context, so applications which use extremely
small thread stacks may still need to avoid using these features.
|
|
Implemented as a wrapper around fegetround introducing a new function
to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
|
|
these macros have the same distinct definition on blackfin, frv, m68k,
mips, sparc and xtensa kernels. POLLMSG and POLLRDHUP additionally
differ on sparc.
|
|
the memory model we use internally for atomics permits plain loads of
values which may be subject to concurrent modification without
requiring that a special load function be used. since a compiler is
free to make transformations that alter the number of loads or the way
in which loads are performed, the compiler is theoretically free to
break this usage. the most obvious concern is with atomic cas
constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be
transformed to a_cas(p,*p,f(*p)); where the latter is intended to show
multiple loads of *p whose resulting values might fail to be equal;
this would break the atomicity of the whole operation. but even more
fundamental breakage is possible.
with the changes being made now, objects that may be modified by
atomics are modeled as volatile, and the atomic operations performed
on them by other threads are modeled as asynchronous stores by
hardware which happens to be acting on the request of another thread.
such modeling of course does not itself address memory synchronization
between cores/cpus, but that aspect was already handled. this all
seems less than ideal, but it's the best we can do without mandating a
C11 compiler and using the C11 model for atomics.
in the case of pthread_once_t, the ABI type of the underlying object
is not volatile-qualified. so we are assuming that accessing the
object through a volatile-qualified lvalue via casts yields volatile
access semantics. the language of the C standard is somewhat unclear
on this matter, but this is an assumption the linux kernel also makes,
and seems to be the correct interpretation of the standard.
|
|
this syscall allows fexecve to be implemented without /proc, it is new
in linux v3.19, added in commit 51f39a1f0cea1cacf8c787f652f26dfee9611874
(sh and microblaze do not have allocated syscall numbers yet)
added a x32 fix as well: the io_setup and io_submit syscalls are no
longer common with x86_64, so use the x32 specific numbers.
|
|
x86_64 syscall.h defined some musl internal syscall names and made
them public. These defines were already moved to src/internal/syscall.h
(except for SYS_fadvise which is added now) so the cruft in x86_64
syscall.h is not needed.
|
|
mxcs_mask should be mxcr_mask
|
|
the definitions are generic for all kernel archs. exposure of these
macros now only occurs on the same feature test as for the function
accepting them, which is believed to be more correct.
|
|
these syscalls are new in linux v3.18, bpf is present on all
supported archs except sh, kexec_file_load is only allocted for
x86_64 and x32 yet.
bpf was added in linux commit 99c55f7d47c0dc6fc64729f37bf435abf43f4c60
kexec_file_load syscall number was allocated in commit
f0895685c7fd8c938c91a9d8a6f7c11f22df58d2
|
|
|
|
|
|
these syscalls are new in linux v3.17 and present on all supported
archs except sh.
seccomp was added in commit 48dc92b9fc3926844257316e75ba11eb5c742b2c
it has operation, flags and pointer arguments (if flags==0 then it is
the same as prctl(PR_SET_SECCOMP,...)), the uapi header for flag
definitions is linux/seccomp.h
getrandom was added in commit c6e9d6f38894798696f23c8084ca7edbf16ee895
it provides an entropy source when open("/dev/urandom",..) would fail,
the uapi header for flags is linux/random.h
memfd_create was added in commit 9183df25fe7b194563db3fec6dc3202a5855839c
it allows anon mmap to have an fd, that can be shared, sealed and needs no
mount point, the uapi header for flags is linux/memfd.h
|
|
based on patch by Jens Gustedt.
mtx_t and cnd_t are defined in such a way that they are formally
"compatible types" with pthread_mutex_t and pthread_cond_t,
respectively, when accessed from a different translation unit. this
makes it possible to implement the C11 functions using the pthread
functions (which will dereference them with the pthread types) without
having to use the same types, which would necessitate either namespace
violations (exposing pthread type names in threads.h) or incompatible
changes to the C++ name mangling ABI for the pthread types.
for the rest of the types, things are much simpler; using identical
types is possible without any namespace considerations.
|
|
unfortunately this needs to be able to vary by arch, because of a huge
mess GCC made: the GCC definition, which became the ABI, depends on
quirks in GCC's definition of __alignof__, which does not match the
formal alignment of the type.
GCC's __alignof__ unexpectedly exposes the an implementation detail,
its "preferred alignment" for the type, rather than the formal/ABI
alignment of the type, which it only actually uses in structures. on
most archs the two values are the same, but on some (at least i386)
the preferred alignment is greater than the ABI alignment.
I considered using _Alignas(8) unconditionally, but on at least one
arch (or1k), the alignment of max_align_t with GCC's definition is
only 4 (even the "preferred alignment" for these types is only 4).
|
|
when manipulating the robust list, the order of stores matters,
because the code may be asynchronously interrupted by a fatal signal
and the kernel will then access the robust list in what is essentially
an async-signal context.
previously, aliasing considerations made it seem unlikely that a
compiler could reorder the stores, but proving that they could not be
reordered incorrectly would have been extremely difficult. instead
I've opted to make all the pointers used as part of the robust list,
including those in the robust list head and in the individual mutexes,
volatile.
in addition, the format of the robust list has been changed to point
back to the head at the end, rather than ending with a null pointer.
this is to match the documented kernel robust list ABI. the null
pointer, which was previously used, only worked because faults during
access terminate the robust list processing.
|
|
the a_cas_l, a_swap_l, a_swap_p, and a_store_l operations were
probably used a long time ago when only i386 and x86_64 were
supported. as other archs were added, support for them was
inconsistent, and they are obviously not in use at present. having
them around potentially confuses readers working on new ports, and the
type-punning hacks and inconsistent use of types in their definitions
is not a style I wish to perpetuate in the source tree, so removing
them seems appropriate.
|
|
it's like rename but with flags eg. to allow atomic exchange of two files,
introduced in linux 3.15 commit 520c8b16505236fc82daa352e6c5e73cd9870cff
|
|
|
