| Age | Commit message (Collapse) | Author | Lines |
|---|
|
based on patch by Jens Gustedt.
mtx_t and cnd_t are defined in such a way that they are formally
"compatible types" with pthread_mutex_t and pthread_cond_t,
respectively, when accessed from a different translation unit. this
makes it possible to implement the C11 functions using the pthread
functions (which will dereference them with the pthread types) without
having to use the same types, which would necessitate either namespace
violations (exposing pthread type names in threads.h) or incompatible
changes to the C++ name mangling ABI for the pthread types.
for the rest of the types, things are much simpler; using identical
types is possible without any namespace considerations.
|
|
unfortunately this needs to be able to vary by arch, because of a huge
mess GCC made: the GCC definition, which became the ABI, depends on
quirks in GCC's definition of __alignof__, which does not match the
formal alignment of the type.
GCC's __alignof__ unexpectedly exposes the an implementation detail,
its "preferred alignment" for the type, rather than the formal/ABI
alignment of the type, which it only actually uses in structures. on
most archs the two values are the same, but on some (at least i386)
the preferred alignment is greater than the ABI alignment.
I considered using _Alignas(8) unconditionally, but on at least one
arch (or1k), the alignment of max_align_t with GCC's definition is
only 4 (even the "preferred alignment" for these types is only 4).
|
|
when manipulating the robust list, the order of stores matters,
because the code may be asynchronously interrupted by a fatal signal
and the kernel will then access the robust list in what is essentially
an async-signal context.
previously, aliasing considerations made it seem unlikely that a
compiler could reorder the stores, but proving that they could not be
reordered incorrectly would have been extremely difficult. instead
I've opted to make all the pointers used as part of the robust list,
including those in the robust list head and in the individual mutexes,
volatile.
in addition, the format of the robust list has been changed to point
back to the head at the end, rather than ending with a null pointer.
this is to match the documented kernel robust list ABI. the null
pointer, which was previously used, only worked because faults during
access terminate the robust list processing.
|
|
the a_cas_l, a_swap_l, a_swap_p, and a_store_l operations were
probably used a long time ago when only i386 and x86_64 were
supported. as other archs were added, support for them was
inconsistent, and they are obviously not in use at present. having
them around potentially confuses readers working on new ports, and the
type-punning hacks and inconsistent use of types in their definitions
is not a style I wish to perpetuate in the source tree, so removing
them seems appropriate.
|
|
it's like rename but with flags eg. to allow atomic exchange of two files,
introduced in linux 3.15 commit 520c8b16505236fc82daa352e6c5e73cd9870cff
|
|
|
|
this was one of the main instances of ugly code duplication: all archs
use basically the same types of relocations, but roughly equivalent
logic was duplicated for each arch to account for the different naming
and numbering of relocation types and variation in whether REL or RELA
records are used.
as an added bonus, both REL and RELA are now supported on all archs,
regardless of which is used by the standard toolchain.
|
|
the immediate motivation is supporting TLSDESC relocations which
require allocation and thus may fail (unless we pre-allocate), but
this mechanism should also be used for throwing an error on
unsupported or invalid relocation types, and perhaps in certain cases,
for reporting when a relocation is not satisfiable.
|
|
linux 3.14 introduced sched_getattr and sched_setattr syscalls in
commit d50dde5a10f305253cbc3855307f608f8a3c5f73
and the related SCHED_DEADLINE scheduling policy in
commit aab03e05e8f7e26f51dee792beddcb5cca9215a5
but struct sched_attr "extended scheduling parameters data structure"
is not yet exported to userspace (necessary for using the syscalls)
so related uapi definitions are not added yet.
|
|
the vdso symbol lookup code is based on the original 2011 patch by
Nicholas J. Kain, with some streamlining, pointer arithmetic fixes,
and one symbol version matching fix.
on the consumer side (clock_gettime), per-arch macros for the
particular symbol name and version to lookup are added in
syscall_arch.h, and no vdso code is pulled in on archs which do not
define these macros. at this time, vdso is enabled only on x86_64.
the vdso support at the dynamic linker level is no longer useful to
libc, but is left in place for the sake of debuggers (which may need
the vdso in the link map to find its functions) and possibly use with
dlsym.
|
|
The mips arch is special in that it uses different RLIMIT_
numbers than other archs, so allow bits/resource.h to override
the default RLIMIT_ numbers (empty on all archs except mips).
Reported by orc.
|
|
in the previous changes, I missed the fact that both the prototype of
the sigaltstack function and the definition of ucontext_t depend on
stack_t.
|
|
it's different at least on mips. mips version will be fixed in a
separate commit to show the change.
|
|
the definition was found to be incorrect at least for powerpc, and
fixing this cleanly requires making the definition arch-specific. this
will allow cleaning up the definition for other archs to make it more
specific, and reversing some of the ugliness (time_t hacks) introduced
with the x32 port.
this first commit simply copies the existing definition to each arch
without any changes. this is intentional, to make it easier to review
changes made on a per-arch basis.
|
|
|
|
|
|
aside from general cleanup, this should allow the identical atomic.h
file to be used for the upcoming x32 port.
|
|
the operand size is unnecessary, since the assembler knows it from the
destination register size. removing the suffix makes it so the same
code should work for x32.
|
|
otherwise it's unclear that it's correct. aside from that, it makes
for a gratuitous difference between the x86_64 header and the upcoming
x32 header.
|
|
|
|
the fix should be complete on archs that use the generic definitions
(i386, arm, x86_64, microblaze), but mips and powerpc have not been
checked thoroughly and may need more fixes.
|
|
definition in linux:
#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
where __O_TMPFILE and O_DIRECTORY are arch specific
|
|
the only immediate effect of this commit is enabling PIE support on
some archs that did not previously have any Scrt1.s, since the
existing asm files for crt1 override this C code. so some of the
crt_arch.h files committed are only there for the sake of documenting
what their archs "would do" if they used the new C-based crt1.
the expectation is that new archs should use this new system rather
than using heavy asm for crt1. aside from being easier and less
error-prone, it also ensures that PIE support is available immediately
(since Scrt1.o is generated from the same C source, using -fPIC)
rather than having to be added as an afterthought in the porting
process.
|
|
this is necessary to meet the C++ ABI target. alternatives were
considered to avoid the size increase for non-sig jmp_buf objects, but
they seemed to have worse properties. moreover, the relative size
increase is only extreme on x86[_64]; one way of interpreting this is
that, if the size increase from this patch makes jmp_buf use too much
memory, then the program was already using too much memory when built
for non-x86 archs.
|
|
i386 was done with the big commit but I missed the others
|
|
rather than moving nlink_t back to the arch-specific file, I've added
a macro _Reg defined to the canonical type for register-size values on
the arch. this is not the same as _Addr for (not-yet-supported)
32-on-64 pseudo-archs like x32 and mips n32, so a new macro was
needed.
|
|
aside from the obvious C++ ABI purpose for this change, it also brings
musl into alignment with the compiler's idea of the definition of
wint_t (use in -Wformat), and makes the situation less awkward on ARM,
where wchar_t is unsigned.
internal code using wint_t and WEOF was checked against this change,
and while a few cases of storing WEOF into wchar_t were found, they
all seem to operate properly with the natural conversion from unsigned
to signed.
|
|
the arch-specific bits/alltypes.h.sh has been replaced with a generic
alltypes.h.in and minimal arch-specific bits/alltypes.h.in.
this commit is intended to have no functional changes except:
- exposing additional symbols that POSIX allows but does not require
- changing the C++ name mangling for some types
- fixing the signedness of blksize_t on powerpc (POSIX requires signed)
- fixing the limit macros for sig_atomic_t on x86_64
- making dev_t an unsigned type (ABI matching goal, and more logical)
in addition, some types that were wrongly defined with long on 32-bit
archs were changed to int, and vice versa; this change is
non-functional except for the possibility of making pointer types
mismatch, and only affects programs that were using them incorrectly,
and only at build-time, not runtime.
the following changes were made in the interest of moving
non-arch-specific types out of the alltypes system and into the
headers they're associated with, and also will tend to improve
application compatibility:
- netdb.h now includes netinet/in.h (for socklen_t and uint32_t)
- netinet/in.h now includes sys/socket.h and inttypes.h
- sys/resource.h now includes sys/time.h (for struct timeval)
- sys/wait.h now includes signal.h (for siginfo_t)
- langinfo.h now includes nl_types.h (for nl_item)
for the types in stdint.h:
- types which are of no interest to other headers were moved out of
the alltypes system.
- fast types for 8- and 64-bit are hard-coded (at least for now); only
the 16- and 32-bit ones have reason to vary by arch.
and the following types have been changed for C++ ABI purposes;
- mbstate_t now has a struct tag, __mbstate_t
- FILE's struct tag has been changed to _IO_FILE
- DIR's struct tag has been changed to __dirstream
- locale_t's struct tag has been changed to __locale_struct
- pthread_t is defined as unsigned long in C++ mode only
- fpos_t now has a struct tag, _G_fpos64_t
- fsid_t's struct tag has been changed to __fsid_t
- idtype_t has been made an enum type (also required by POSIX)
- nl_catd has been changed from long to void *
- siginfo_t's struct tag has been removed
- sigset_t's has been given a struct tag, __sigset_t
- stack_t has been given a struct tag, sigaltstack
- suseconds_t has been changed to long on 32-bit archs
- [u]intptr_t have been changed from long to int rank on 32-bit archs
- dev_t has been made unsigned
summary of tests that have been performed against these changes:
- nsz's libc-test (diff -u before and after)
- C++ ABI check symbol dump (diff -u before, after, glibc)
- grepped for __NEED, made sure types needed are still in alltypes
- built gcc 3.4.6
|
|
this change is both to fix one of the remaining type (and thus C++
ABI) mismatches with glibc/LSB and to allow use of the full range of
uid and gid values, if so desired.
passwd/group access functions were not prepared to deal with unsigned
values, so they too have been fixed with this commit.
|
|
prior to this change, using a non-default syslibdir was impractical on
systems where the ordinary library paths contain musl-incompatible
library files. the file containing search paths was always taken from
/etc, which would either correspond to a system-wide musl
installation, or fail to exist at all, resulting in searching of the
default library path.
the new search strategy is safe even for suid programs because the
pathname used comes from the PT_INTERP header of the program being
run, rather than any external input.
as part of this change, I have also begun differentiating the names of
arch variants that differ by endianness or floating point calling
convention. the corresponding changes in the build system and and gcc
wrapper script (to use an alternate dynamic linker name) for these
configurations have not yet been made.
|
|
patch by Luka Perkov, who noted that all other archs have a newline.
|
|
despite declaring functions that take arguments of type va_list, these
headers are not permitted by the c standard to expose the definition
of va_list, so an alias for the type must be used. the name
__isoc_va_list was chosen to convey that the purpose of this alternate
name is for iso c conformance, and to avoid the multitude of names
which gcc mangles with its hideous "fixincludes" monstrosity, leading
to serious header breakage if these "fixes" are run.
|
|
|
|
following glibc use the lowest rank 64bit integer type for ino_t etc.
this is eg. useful for printf format compatibility
|
|
there was some question as to how many decimal places to use, since
one decimal place is always sufficient to identify the smallest
denormal uniquely. for now, I'm following the example in the C
standard which is consistent with the other min/max macros we already
had in place.
|
|
|
|
the preprocessor can reliably determine the signedness of wchar_t.
L'\0' is used for 0 in the expressions so that, if the underlying type
of wchar_t is long rather than int, the promoted type of the
expression will match the type of wchar_t.
|
|
this type was removed back in 5243e5f1606a9c6fcf01414e ,
because it was removed from the XSI specs.
however some apps use it.
since it's in the POSIX reserved namespace, we can expose it
unconditionally.
|
|
and remove syscall todos from microblaze
|
|
the issue at hand is that many syscalls require as an argument the
kernel-ABI size of sigset_t, intended to allow the kernel to switch to
a larger sigset_t in the future. previously, each arch was defining
this size in syscall_arch.h, which was redundant with the definition
of _NSIG in bits/signal.h. as it's used in some not-quite-portable
application code as well, _NSIG is much more likely to be recognized
and understood immediately by someone reading the code, and it's also
shorter and less cluttered.
note that _NSIG is actually 65/129, not 64/128, but the division takes
care of throwing away the off-by-one part.
|
|
reportedly some programs (e.g. showkeys in the kbd package) use it.
|
|
wctype_t was incorrectly "int" rather than "long" on x86_64. not only
is this an ABI incompatibility; it's also a major design flaw if we
ever wanted wctype_t to be implemented as a pointer, which would be
necessary if locales support custom character classes, since int is
too small to store a converted pointer. this commit fixes wctype_t to
be unsigned long on all archs, matching the LSB ABI; this change does
not matter for C code, but for C++ it affects mangling.
the same issue applied to wctrans_t. glibc/LSB defines this type as
const __int32_t *, but since no such definition is visible, I've just
expanded the definition, int, everywhere.
it would be nice if these types (which don't vary by arch) could be in
wctype.h, but the OB XSI requirement in POSIX that wchar.h expose some
types and functions from wctype.h precludes doing so. glibc works
around this with some hideous hacks, but trying to duplicate that
would go against the intent of musl's headers.
|
|
x86_64 does not have excess precision, at all
|
|
|
|
mips and powerpc already had this termios flag defined
|
|
|
|
it was already defined for mips, but was missing from other archs
|
|
|
|
they were accidentally exposed under just baseline POSIX, which is a
big namespace pollution issue. thankfully glibc only exposes them
under _GNU_SOURCE, not under any of its other options, so omitting
the pollution in the default _BSD_SOURCE profile does not hurt
application compatibility at all.
|
|
glibc exposes them from ucontext.h.
since that header includes signal.h, it is safe to put them
into bits/signal.h, if _GNU_SOURCE is defined.
|
