| Age | Commit message (Collapse) | Author | Lines |
|---|
|
fix up clone signature to match the actual behavior. the new
__syncall_wait function allows a __synccall callback to wait for other
threads to continue without returning, so that it can resume action
after the caller finishes. this interface could be made significantly
more general/powerful with minimal effort, but i'll wait to do that
until it's actually useful for something.
|
|
like mutexes and semaphores, rwlocks suffered from a race condition
where the unlock operation could access the lock memory after another
thread successfully obtained the lock (and possibly destroyed or
unmapped the object). this has been fixed in the same way it was fixed
for other lock types.
in addition, the previous implementation favored writers over readers.
in the absence of other considerations, that is the best behavior for
rwlocks, and posix explicitly allows it. however posix also requires
read locks to be recursive. if writers are favored, any attempt to
obtain a read lock while a writer is waiting for the lock will fail,
causing "recursive" read locks to deadlock. this can be avoided by
keeping track of which threads already hold read locks, but doing so
requires unbounded memory usage, and there must be a fallback case
that favors readers in case memory allocation failed. and all of this
must be synchronized. the cost, complexity, and risk of errors in
getting it right is too great, so we simply favor readers.
tracking of the owner of write locks has been removed, as it was not
useful for anything. it could allow deadlock detection, but it's not
clear to me that returning EDEADLK (which a buggy program is likely to
ignore) is better than deadlocking; at least the latter behavior
prevents further data corruption. a correct program cannot invoke this
situation anyway.
the reader count and write lock state, as well as the "last minute"
waiter flag have all been combined into a single atomic lock. this
means all state transitions for the lock are atomic compare-and-swap
operations. this makes establishing correctness much easier and may
improve performance.
finally, some code duplication has been cleaned up. more is called
for, especially the standard __timedwait idiom repeated in all locks.
|
|
new features:
- FUTEX_WAIT_BITSET op will be used for timed waits if available. this
saves a call to clock_gettime.
- error checking for the timespec struct is now inside __timedwait so
it doesn't need to be duplicated everywhere. cond_timedwait still
needs to duplicate it to avoid unlocking the mutex, though.
- pushing and popping the cancellation handler is delegated to
__timedwait, and cancellable/non-cancellable waits are unified.
|
|
previously, stdio used spinlocks, which would be unacceptable if we
ever add support for thread priorities, and which yielded
pathologically bad performance if an application attempted to use
flockfile on a key file as a major/primary locking mechanism.
i had held off on making this change for fear that it would hurt
performance in the non-threaded case, but actually support for
recursive locking had already inflicted that cost. by having the
internal locking functions store a flag indicating whether they need
to perform unlocking, rather than using the actual recursive lock
counter, i was able to combine the conditionals at unlock time,
eliminating any additional cost, and also avoid a nasty corner case
where a huge number of calls to ftrylockfile could cause deadlock
later at the point of internal locking.
this commit also fixes some issues with usage of pthread_self
conflicting with __attribute__((const)) which resulted in crashes with
some compiler versions/optimizations, mainly in flockfile prior to
pthread_create.
|
|
changing credentials in a multi-threaded program is extremely
difficult on linux because it requires synchronizing the change
between all threads, which have their own thread-local credentials on
the kernel side. this is further complicated by the fact that changing
the real uid can fail due to exceeding RLIMIT_NPROC, making it
possible that the syscall will succeed in some threads but fail in
others.
the old __rsyscall approach being replaced was robust in that it would
report failure if any one thread failed, but in this case, the program
would be left in an inconsistent state where individual threads might
have different uid. (this was not as bad as glibc, which would
sometimes even fail to report the failure entirely!)
the new approach being committed refuses to change real user id when
it cannot temporarily set the rlimit to infinity. this is completely
POSIX conformant since POSIX does not require an implementation to
allow real-user-id changes for non-privileged processes whatsoever.
still, setting the real uid can fail due to memory allocation in the
kernel, but this can only happen if there is not already a cached
object for the target user. thus, we forcibly serialize the syscalls
attempts, and fail the entire operation on the first failure. this
*should* lead to an all-or-nothing success/failure result, but it's
still fragile and highly dependent on kernel developers not breaking
things worse than they're already broken.
ideally linux will eventually add a CLONE_USERCRED flag that would
give POSIX conformant credential changes without any hacks from
userspace, and all of this code would become redundant and could be
removed ~10 years down the line when everyone has abandoned the old
broken kernels. i'm not holding my breath...
|
|
if thread id was reused by the kernel between the time pthread_kill
read it from the userspace pthread_t object and the time of the tgkill
syscall, a signal could be sent to the wrong thread. the tgkill
syscall was supposed to prevent this race (versus the old tkill
syscall) but it can't; it can only help in the case where the tid is
reused in a different process, but not when the tid is reused in the
same process.
the only solution i can see is an extra lock to prevent threads from
exiting while another thread is trying to pthread_kill them. it should
be very very cheap in the non-contended case.
|
|
|
|
|
|
|
|
the new approach relies on the fact that the only ways to create
sigset_t objects without invoking UB are to use the sig*set()
functions, or from the masks returned by sigprocmask, sigaction, etc.
or in the ucontext_t argument to a signal handler. thus, as long as
sigfillset and sigaddset avoid adding the "protected" signals, there
is no way the application will ever obtain a sigset_t including these
bits, and thus no need to add the overhead of checking/clearing them
when sigprocmask or sigaction is called.
note that the old code actually *failed* to remove the bits from
sa_mask when sigaction was called.
the new implementations are also significantly smaller, simpler, and
faster due to ignoring the useless "GNU HURD signals" 65-1024, which
are not used and, if there's any sanity in the world, never will be
used.
|
|
the previous implementation had at least 2 problems:
1. the case where additional threads reached the barrier before the
first wave was finished leaving the barrier was untested and seemed
not to be working.
2. threads leaving the barrier continued to access memory within the
barrier object after other threads had successfully returned from
pthread_barrier_wait. this could lead to memory corruption or crashes
if the barrier object had automatic storage in one of the waiting
threads and went out of scope before all threads finished returning,
or if one thread unmapped the memory in which the barrier object
lived.
the new implementation avoids both problems by making the barrier
state essentially local to the first thread which enters the barrier
wait, and forces that thread to be the last to return.
|
|
this patch improves the correctness, simplicity, and size of
cancellation-related code. modulo any small errors, it should now be
completely conformant, safe, and resource-leak free.
the notion of entering and exiting cancellation-point context has been
completely eliminated and replaced with alternative syscall assembly
code for cancellable syscalls. the assembly is responsible for setting
up execution context information (stack pointer and address of the
syscall instruction) which the cancellation signal handler can use to
determine whether the interrupted code was in a cancellable state.
these changes eliminate race conditions in the previous generation of
cancellation handling code (whereby a cancellation request received
just prior to the syscall would not be processed, leaving the syscall
to block, potentially indefinitely), and remedy an issue where
non-cancellable syscalls made from signal handlers became cancellable
if the signal handler interrupted a cancellation point.
x86_64 asm is untested and may need a second try to get it right.
|
|
otherwise we cannot support an application's desire to use
asynchronous cancellation within the callback function. this change
also slightly debloats pthread_create.c.
|
|
calling pthread_exit from, or pthread_cancel on, the timer callback
thread will no longer destroy the timer.
|
|
this is something of a tradeoff, as now set*id() functions, rather
than pthread_create, are what pull in the code overhead for dealing
with linux's refusal to implement proper POSIX thread-vs-process
semantics. my motivations are:
1. it's cleaner this way, especially cleaner to optimize out the
rsyscall locking overhead from pthread_create when it's not needed.
2. it's expected that only a tiny number of core system programs will
ever use set*id() functions, whereas many programs may want to use
threads, and making thread overhead tiny is an incentive for "light"
programs to try threads.
|
|
the major idea of this patch is not to depend on having the timer
pointer delivered to the signal handler, and instead use the thread
pointer to get the callback function address and argument. this way,
the parent thread can make the timer_create syscall while the child
thread is starting, and it should never have to block waiting for the
barrier.
|
|
- there is no longer any risk of spoofing cancellation requests, since
the cancel flag is set in pthread_cancel rather than in the signal
handler.
- cancellation signal is no longer unblocked when running the
cancellation handlers. instead, pthread_create will cause any new
threads created from a cancellation handler to unblock their own
cancellation signal.
- various tweaks in preparation for POSIX timer support.
|
|
|
|
|
|
some of this code should be cleaned up, e.g. using macros for some of
the bit flags, masks, etc. nonetheless, the code is believed to be
working and correct at this point.
|
|
the layout has been chosen so that pointer slots 3 and 4 fit between
the integer slots on 32-bit archs, and come after the integer slots on
64-bit archs.
|
|
this change is necessary to free up one slot in the mutex structure so
that we can use doubly-linked lists in the implementation of robust
mutexes.
|
|
we can avoid blocking signals by simply using a flag to mark that the
thread has exited and prevent it from getting counted in the rsyscall
signal-pingpong. this restores the original pthread create/join
throughput from before the sigprocmask call was added.
|
|
problem 1: mutex type from the attribute was being ignored by
pthread_mutex_init, so recursive/errorchecking mutexes were never
being used at all.
problem 2: ownership of recursive mutexes was not being enforced at
unlock time.
|
|
|
|
this allows sys/types.h to provide the pthread types, as required by
POSIX. this design also facilitates forcing ABI-compatible sizes in
the arch-specific alltypes.h, while eliminating the need for
developers changing the internals of the pthread types to poke around
with arch-specific headers they may not be able to test.
|
|
|
|
|
|
|
