| Age | Commit message (Collapse) | Author | Lines |
|---|
|
_Noreturn is a C11 construct, and may only be used at the site of a
function definition.
|
|
commit 788d5e24ca19c6291cebd8d1ad5b5ed6abf42665 noted that we could
add this if needed, and in fact it is needed, but not for one of the
archs documented as having a 7th syscall arg register. rather, it's
needed for mips (o32), where all but the first 4 arguments are passed
on the stack, and the stack can accommodate a 7th.
|
|
commit b50d315fd23f0fbc4c11e2583801dd123d933745 introduced
fp_force_eval implemented by default with a dead store to a volatile
variable. unfortunately introduces warnings with -Wunused-variable and
breaks the ability to use -Werror with the default warning options set
by configure when warnings are enabled.
we could just call fp_barrier instead, but that results in a spurious
load after the store due to volatile semantics.
the fix committed here avoids the load. it will still produce warnings
without -Wno-unused-but-set-variable, but that's part of our default
warning profile, and there are already other locations in the source
where an unused variable warning will occur without it.
|
|
from https://github.com/ARM-software/optimized-routines,
commit 04884bd04eac4b251da4026900010ea7d8850edc
The underflow exception is signaled if the result is in the subnormal
range even if the result is exact.
code size change: +3421 bytes.
benchmark on x86_64 before, after, speedup:
-Os:
pow rthruput: 102.96 ns/call 33.38 ns/call 3.08x
pow latency: 144.37 ns/call 54.75 ns/call 2.64x
-O3:
pow rthruput: 98.91 ns/call 32.79 ns/call 3.02x
pow latency: 138.74 ns/call 53.78 ns/call 2.58x
|
|
from https://github.com/ARM-software/optimized-routines,
commit 04884bd04eac4b251da4026900010ea7d8850edc
POWF_SCALE != 1.0 case only matters if TOINT_INTRINSICS is set, which
is currently not supported for any target.
SNaN is not supported, it would require an issignalingf
implementation.
code size change: -816 bytes.
benchmark on x86_64 before, after, speedup:
-Os:
powf rthruput: 95.14 ns/call 20.04 ns/call 4.75x
powf latency: 137.00 ns/call 34.98 ns/call 3.92x
-O3:
powf rthruput: 92.48 ns/call 13.67 ns/call 6.77x
powf latency: 131.11 ns/call 35.15 ns/call 3.73x
|
|
from https://github.com/ARM-software/optimized-routines,
commit 04884bd04eac4b251da4026900010ea7d8850edc
In expf TOINT_INTRINSICS is kept, but is unused, it would require support
for __builtin_round and __builtin_lround as single instruction.
code size change: +94 bytes.
benchmark on x86_64 before, after, speedup:
-Os:
expf rthruput: 9.19 ns/call 8.11 ns/call 1.13x
expf latency: 34.19 ns/call 18.77 ns/call 1.82x
exp2f rthruput: 5.59 ns/call 6.52 ns/call 0.86x
exp2f latency: 17.93 ns/call 16.70 ns/call 1.07x
-O3:
expf rthruput: 9.12 ns/call 4.92 ns/call 1.85x
expf latency: 34.44 ns/call 18.99 ns/call 1.81x
exp2f rthruput: 5.58 ns/call 4.49 ns/call 1.24x
exp2f latency: 17.95 ns/call 16.94 ns/call 1.06x
|
|
Musl currently aims to support non-nearest rounding mode and does not
support SNaNs. These macros allow marking relevant code paths in case
these decisions are changed later (they also help documenting the
corner cases involved).
|
|
These don't have an effectw with -Os so not useful with default settings
other than documenting the expectation.
With --enable-optimize=internal,malloc,string,math the libc.so code size
increases by 18K on x86_64 and performance varies in -2% .. +10%.
|
|
|
|
These are supposed to be used in tail call positions when handling
special cases in new code. (fp exceptions may be raised "naturally"
by the common code path if special casing is more effort.)
This implements the error handling apis used in
https://github.com/ARM-software/optimized-routines
without errno setting.
|
|
Previously type casts or assignments were used for handling excess
precision, which assumed standard C99 semantics, but since it's a
rarely needed obscure detail, it's better to use explicit helper
functions to document where we rely on this. It also helps if the
code is used outside of the libc in non-C99 compilation mode: with the
default excess precision handling of gcc, explicit inline asm barriers
are needed for narrowing on FLT_EVAL_METHOD!=0 targets.
I plan to use this in new code with the existing style that uses
double_t and float_t as much as possible.
One ugliness is that it is required for almost every return statement
since that does not drop excess precision (the standard changed this
in C11 annex F, but that does not help in non-standard compilation
modes or with old compilers).
|
|
C99 has ways to support fenv access, but compilers don't implement it
and assume nearest rounding mode and no fp status flag access. (gcc has
-frounding-math and then it does not assume nearest rounding mode, but
it still assumes the compiled code itself does not change the mode.
Even if the C99 mechanism was implemented it is not ideal: it requires
all code in the library to be compiled with FENV_ACCESS "on" to make it
usable in non-nearest rounding mode, but that limits optimizations more
than necessary.)
The math functions should give reasonable results in all rounding modes
(but the quality may be degraded in non-nearest rounding modes) and the
fp status flag settings should follow the spec, so fenv side-effects are
important and code transformations that break them should be prevented.
Unfortunately compilers don't give any help with this, the best we can
do is to add fp barriers to the code using volatile local variables
(they create a stack frame and undesirable memory accesses to it) or
inline asm (gcc specific, requires target specific fp reg constraints,
often creates unnecessary reg moves and multiple barriers are needed to
express that an operation has side-effects) or extern call (only useful
in tail-call position to avoid stack-frame creation and does not work
with lto).
We assume that in a math function if an operation depends on the input
and the output depends on it, then the operation will be evaluated at
runtime when the function is called, producing all the expected fenv
side-effects (this is not true in case of lto and in case the operation
is evaluated with excess precision that is not rounded away). So fp
barriers are needed (1) to prevent the move of an operation within a
function (in case it may be moved from an unevaluated code path into an
evaluated one or if it may be moved across a fenv access), (2) force the
evaluation of an operation for its side-effect when it has no input
dependency (may be constant folded) or (3) when its output is unused. I
belive that fp_barrier and fp_force_eval can take care of these and they
should not be needed in hot code paths.
|
|
Nothing is left from the original fdlibm header nor from the bsd
modifications to it other than some internal api declarations.
Comments are dropped that may be copyrightable content.
|
|
Code generation for SET_HIGH_WORD slightly changes, but it only affects
pow, otherwise the generated code is unchanged.
|
|
This makes it easier to build musl math code with a compiler that
does not support complex types (tcc) and in general more sensible
factorization of the internal headers.
|
|
the weak version of __syscall_cp_c was using a tail call to __syscall
to avoid duplicating the 6-argument syscall code inline in small
static-linked programs, but now that __syscall no longer exists, the
inline expansion is no longer duplication.
the syscall.h machinery suppported up to 7 syscall arguments, only via
an external __syscall function, but we presently have no syscall call
points that actually make use of that many, and the kernel only
defines 7-argument calling conventions for arm, powerpc (32-bit), and
sh. if it turns out we need them in the future, they can easily be
added.
|
|
this is the first part of a series of patches intended to make
__syscall fully self-contained in the object file produced using
syscall.h, which will make it possible for crt1 code to perform
syscalls.
the (confusingly named) i386 __vsyscall mechanism, which this commit
removes, was introduced before the presence of a valid thread pointer
was mandatory; back then the thread pointer was setup lazily only if
threads were used. the intent was to be able to perform syscalls using
the kernel's fast entry point in the VDSO, which can use the sysenter
(Intel) or syscall (AMD) instruction instead of int $128, but without
inlining an access to the __syscall global at the point of each
syscall, which would incur a significant size cost from PIC setup
everywhere. the mechanism also shuffled registers/calling convention
around to avoid spills of call-saved registers, and to avoid
allocating ebx or ebp via asm constraints, since there are plenty of
broken-but-supported compiler versions which are incapable of
allocating ebx with -fPIC or ebp with -fno-omit-frame-pointer.
the new mechanism preserves the properties of avoiding spills and
avoiding allocation of ebx/ebp in constraints, but does it inline,
using some fairly simple register shuffling, and uses a field of the
thread structure rather than global data for the vdso-provided syscall
code address.
for now, the external __syscall function is refactored not to use the
old __vsyscall so it can be kept, but the intent is to remove it too.
|
|
commit d6c855caa88ddb1ab6e24e23a14b1e7baf4ba9c7 caused this
"regression", though the behavior was undefined before, overlooking
that f->shend=0 was being used as a sentinel for "EOF" status (actual
EOF or hitting the scanf field width) of the stream helper (shgetc)
functions.
obviously the shgetc macro could be adjusted to check for a null
pointer in addition to the != comparison, but it's the hot path, and
adding extra code/branches to it begins to defeat the purpose.
so instead of setting shend to a null pointer to block further reads,
which no longer works, set it to the current position (rpos). this
makes the shgetc macro work with no change, but it breaks shunget,
which can no longer look at the value of shend to determine whether to
back up. Szabolcs Nagy suggested a solution which I'm using here:
setting shlim to a negative value is inexpensive to test at shunget
time, and automatically re-trips the cnt>=shlim stop condition in
__shgetc no matter what the original limit was.
|
|
the motivation for this change is twofold. first, it gets the fallback
logic out of the dynamic linker, improving code readability and
organization. second, it provides application code that wants to use
the membarrier syscall, which depends on preregistration of intent
before the process becomes multithreaded unless unbounded latency is
acceptable, with a symbol that, when linked, ensures that this
registration happens.
|
|
previously, dynamic loading of new libraries with thread-local storage
allocated the storage needed for all existing threads at load-time,
precluding late failure that can't be handled, but left installation
in existing threads to take place lazily on first access. this imposed
an additional memory access and branch on every dynamic tls access,
and imposed a requirement, which was not actually met, that the
dynamic tlsdesc asm functions preserve all call-clobbered registers
before calling C code to to install new dynamic tls on first access.
the x86[_64] versions of this code wrongly omitted saving and
restoring of fpu/vector registers, assuming the compiler would not
generate anything using them in the called C code. the arm and aarch64
versions saved known existing registers, but failed to be future-proof
against expansion of the register file.
now that we track live threads in a list, it's possible to install the
new dynamic tls for each thread at dlopen time. for the most part,
synchronization is not needed, because if a thread has not
synchronized with completion of the dlopen, there is no way it can
meaningfully request access to a slot past the end of the old dtv,
which remains valid for accessing slots which already existed.
however, it is necessary to ensure that, if a thread sees its new dtv
pointer, it sees correct pointers in each of the slots that existed
prior to the dlopen. my understanding is that, on most real-world
coherency architectures including all the ones we presently support, a
built-in consume order guarantees this; however, don't rely on that.
instead, the SYS_membarrier syscall is used to ensure that all threads
see the stores to the slots of their new dtv prior to the installation
of the new dtv. if it is not supported, the same is implemented in
userspace via signals, using the same mechanism as __synccall.
the __tls_get_addr function, variants, and dynamic tlsdesc asm
functions are all updated to remove the fallback paths for claiming
new dynamic tls, and are now all branch-free.
|
|
the __synccall mechanism provides stop-the-world synchronous execution
of a callback in all threads of the process. it is used to implement
multi-threaded setuid/setgid operations, since Linux lacks them at the
kernel level, and for some other less-critical purposes.
this change eliminates dependency on /proc/self/task to determine the
set of live threads, which in addition to being an unwanted dependency
and a potential point of resource-exhaustion failure, turned out to be
inaccurate. test cases provided by Alexey Izbyshev showed that it
could fail to reflect newly created threads. due to how the
presignaling phase worked, this usually yielded a deadlock if hit, but
in the worst case it could also result in threads being silently
missed (allowed to continue running without executing the callback).
|
|
the hard problem here is unlinking threads from a list when they exit
without creating a window of inconsistency where the kernel task for a
thread still exists and is still executing instructions in userspace,
but is not reflected in the list. the magic solution here is getting
rid of per-thread exit futex addresses (set_tid_address), and instead
using the exit futex to unlock the global thread list.
since pthread_join can no longer see the thread enter a detach_state
of EXITED (which depended on the exit futex address pointing to the
detach_state), it must now observe the unlocking of the thread list
lock before it can unmap the joined thread and return. it doesn't
actually have to take the lock. for this, a __tl_sync primitive is
offered, with a signature that will allow it to be enhanced for quick
return even under contention on the lock, if needed. for now, the
exiting thread always performs a futex wake on its detach_state. a
future change could optimize this out except when there is already a
joiner waiting.
initial/dynamic variants of detached state no longer need to be
tracked separately, since the futex address is always set to the
global list lock, not a thread-local address that could become invalid
on detached thread exit. all detached threads, however, must perform a
second sigprocmask syscall to block implementation-internal signals,
since locking the thread list with them already blocked is not
permissible.
the arch-independent C version of __unmapself no longer needs to take
a lock or setup its own futex address to release the lock, since it
must necessarily be called with the thread list lock already held,
guaranteeing exclusive access to the temporary stack.
changes to libc.threads_minus_1 no longer need to be atomic, since
they are guarded by the thread list lock. it is largely vestigial at
this point, and can be replaced with a cheaper boolean indicating
whether the process is multithreaded at some point in the future.
|
|
whether signals need to be blocked at thread start, and whether
unblocking is necessary in the entry point function, has historically
depended on intricacies of the cancellation design and on whether
there are scheduling operations to perform on the new thread before
its successful creation can be committed. future changes to track an
AS-safe list of live threads will require signals to be blocked
whenever changes are made to the list, so ...
prior to commits b8742f32602add243ee2ce74d804015463726899 and
40bae2d32fd6f3ffea437fa745ad38a1fe77b27e, a signal mask for the entry
function to restore was part of the pthread structure. it was removed
to trim down the size of the structure, which both saved a small
amount of stack space and improved code generation on archs where
small immediate displacements are less costly than arbitrary ones, by
limiting the range of offsets between the base of the thread
structure, its members, and the thread pointer. these commits moved
the saved mask to a special structure used only when special
scheduling was needed, in which case the pthread_create caller and new
thread had to synchronize with each other and could use this memory to
pass a mask.
this commit partially reverts the above two commits, but instead of
putting the mask back in the pthread structure, it moves all "start
argument" members out of the pthread structure, trimming it down
further, and puts them in a separate structure passed on the new
thread's stack. the code path for explicit scheduling of the new
thread is also changed to synchronize with the calling thread in such
a way to avoid spurious futex wakes.
|
|
prior to linux 2.6.22, futex wait could fail with EINTR even for
non-interrupting (SA_RESTART) signals. this was no problem provided
the caller simply restarted the wait, but sem_[timed]wait is required
by POSIX to return when interrupted by a signal. commit
a113434cd68ce30642c4995b1caadcd084be6f09 introduced this behavior, and
commit c0ed5a201b2bdb6d1896064bec0020c9973db0a1 reverted it based on a
mistaken belief that it was not required. this belief stems from a bug
in the specification: the description requires the function to return
when interrupted, but the errors section marks EINTR as a "may fail"
condition rather than a "shall fail" one.
since there does seem to be significant value in the change made in
commit c0ed5a201b2bdb6d1896064bec0020c9973db0a1, making it so that
programs that call sem_wait without checking for EINTR don't silently
make forward progress without obtaining the semaphore or treat it as a
fatal error and abort, add a behind-the-scenes mechanism in the
__timedwait backend to suppress EINTR in programs that have never
installed interrupting signal handlers, and have sigaction track and
report this state. this way the semaphore code is not cluttered by
workarounds and can be updated (to be done in next commit) to reflect
the high-level logic for conforming behavior.
these changes are based loosely on a patch by Markus Wichmann, with
the main changes being atomic update to flag object and moving the
workaround from sem_timedwait to the __timedwait futex backend.
|
|
commit 63c188ec42e76ff768e81f6b65b11c68fc43351e missed making this
change when switching from atomics to locking for modification of the
global locale, leaving access to locale structures unnecessarily
burdened with the restrictions of volatile.
the volatile qualification was originally added in commit
56fbaa3bbe73f12af2bfbbcf2adb196e6f9fe264.
|
|
introduce a new LOC_MAP_FAILED sentinel for errors, since null
pointers for a category's locale map indicate the C locale. at this
time, __get_locale does not fail, so there should be no functional
change by this commit.
|
|
the choice of signed char for lbf was a theoretically space-saving
hack that was not helping, and was unwantedly expensive. while
comparing bytes against a byte-sized member sounds easy, the trick
here was that the byte to be compared was unsigned while the lbf
member was signed, making it possible to set lbf negative to disable
line buffering. however, this imposed a requirement to promote both
operands, zero-extending one and sign-extending the other, in order to
compare them.
to fix this, repurpose the waiters count slot (unused since commit
c21f750727515602a9e84f2a190ee8a0a2aeb2a1). while we're at it, switch
mode (orientation) from signed char to int as well. this makes no
semantic difference (its only possible values are -1, 0, and 1) but it
might help on archs where byte access is awkward.
|
|
to check whether flush due to line buffering is needed, the int-type
character argument must be truncated to unsigned char for comparison.
if the original value is subsequently passed to __overflow, it must be
preserved, adding to register pressure. since it doesn't matter,
truncate all uses so the original value is no longer live.
|
|
the internal putc_unlocked macro was wrongly returning a meaningless
boolean result rather than the written character or EOF.
bug was found by reading (very surprising) asm.
|
|
don't repeat definition in two places.
|
|
as explained in commit 6ba5517a460c6c438f64d69464fdfc3269a4c91a, some
archs use an offset (typicaly -0x8000) with their DTPOFF relocations,
which __tls_get_addr needs to invert. on affected archs, which lack
direct support for large immediates, this can cost multiple extra
instructions in the hot path. instead, incorporate the DTP_OFFSET into
the DTV entries. this means they are no longer valid pointers, so
store them as an array of uintptr_t rather than void *; this also
makes it easier to access slot 0 as a valid slot count.
commit e75b16cf93ebbc1ce758d3ea6b2923e8b2457c68 left behind cruft in
two places, __reset_tls and __tls_get_new, from back when it was
possible to have uninitialized gap slots indicated by a null pointer
in the DTV. since the concept of null pointer is no longer meaningful
with an offset applied, remove this cruft.
presently there are no archs with both TLSDESC and nonzero DTP_OFFSET,
but the dynamic TLSDESC relocation code is also updated to apply an
inverted offset to its offset field, so that the offset DTV would not
impose a runtime cost in TLSDESC resolver functions.
|
|
stack size default is increased from 80k to 128k. this coincides with
Linux's hard-coded default stack for the main thread (128k is
initially committed; growth beyond that up to ulimit is contingent on
additional allocation succeeding) and GNU ld's default PT_GNU_STACK
size for FDPIC, at least on sh.
guard size default is increased from 4k to 8k to reduce the risk of
guard page jumping on overflow, since use of just over 4k of stack is
common (PATH_MAX buffers, etc.).
|
|
limit to 8MB/1MB, repectively. since the defaults cannot be reduced
once increased, excessively large settings would lead to an
unrecoverably broken state. this change is in preparation to allow
defaults to be increased via program headers at the linker level.
creation of threads that really need larger sizes needs to be done
with an explicit attribute.
|
|
per POSIX, deletion of a key for which some threads still have values
stored is permitted, and newly created keys must initially hold the
null value in all threads. these properties were not met by our
implementation; if a key was deleted with values left and a new key
was created in the same slot, the old values were still visible.
moreover, due to lack of any synchronization in pthread_key_delete,
there was a TOCTOU race whereby a concurrent pthread_exit could
attempt to call a null destructor pointer for the newly orphaned
value.
this commit introduces a solution based on __synccall, stopping the
world to zero out the values for deleted keys, but only does so lazily
when all key slots have been exhausted. pthread_key_delete is split
off into a separate translation unit so that static-linked programs
which only create keys but never delete them will not pull in the
__synccall machinery.
a global rwlock is added to synchronize creation and deletion of keys
with dtor execution. since the dtor execution loop now has to release
and retake the lock around its call to each dtor, checks are made not
to call the nodtor dummy function for keys which lack a dtor.
|
|
morally, for null pointers a and b, a-b, a<b, and a>b should all be
defined as 0; however, C does not define any of them.
the stdio implementation makes heavy use of such pointer comparison
and subtraction for buffer logic, and also uses null pos/base/end
pointers to indicate that the FILE is not in the corresponding (read
or write) mode ready for accesses through the buffer.
all of the comparisons are fixed trivially by using != in place of the
relational operators, since the opposite relation (e.g. pos>end) is
logically impossible. the subtractions have been reviewed to check
that they are conditional the stream being in the appropriate reading-
or writing-through-buffer mode, with checks added where needed.
in fgets and getdelim, the checks added should improve performance for
unbuffered streams by avoiding a do-nothing call to memchr, and should
be negligible for buffered streams.
|
|
in order to produce FILE objects to pass to the intscan/floatscan
backends without any (prohibitively costly) extra buffering layer, the
strto* functions set the FILE's rend (read end) buffer pointer to an
invalid value at the end of the address space, or SIZE_MAX/2 past the
beginning of the string. this led to undefined behavior comparing and
subtracting the end pointer with the buffer position pointer (rpos).
the comparison issue is easily eliminated by using != instead of <.
however the subtractions require nontrivial changes:
previously, f->shcnt stored the count that would have been read if
consuming the whole buffer, which required an end pointer for the
buffer. the purpose for this was that it allowed reading it and adding
rpos-rend at any time to get the actual count so far, and required no
adjustment at the time of __shgetc (actual function call) since the
call would only happen when reaching the end of the buffer.
to get rid of the dependency on rend, instead offset shcnt by buf-rpos
(start of buffer) at the time of last __shlim/__shgetc call. this
makes for slightly more work in __shgetc the function, but for the
inline macro it's still just as easy to compute the current count.
since the scan helper interfaces used here are a big hack, comments
are added to document their contracts and what's going on with their
implementations.
|
|
as originally published, the C99 syntax only allowed static index
parameter declarators when a gratuitous parameter name was included.
gcc 3, which some projects use for bootstrapping, is a supported C99
compiler, but does not have the fix to the standard incorporated, so
edit the affected declaration to conform to the earlier buggy C99
syntax.
|
|
since commit dc2f368e565c37728b0d620380b849c3a1ddd78f this has been
disabled by default, but was left available in case users unhappy with
the resulting size or performance regressions wanted to try to make it
work. now that we make widespread use of hidden visibility for
internal interfaces, this no longer makes sense. if any costly calls
remain they can be fixed with hidden aliases.
|
|
this further reduces the number of source files which need to include
libc.h and thereby be potentially exposed to libc global state and
internals.
this will also facilitate further improvements like adding an inline
fast-path, if we want to do so later.
|
|
pthread_atfork.c does not actually include pthread_impl.h and has no
reason to, so it wasn't getting the declaration. move it to libc.h
which is already included by both fork.c and pthread_atfork.c. this
makes more sense anyway since the function has little to do with
pthreads anyway aside from the name.
|
|
the LFS64 macro was not self-documenting and barely saved any
characters. simply use weak_alias directly so that it's clear what's
being done, and doesn't depend on a header to provide a strange macro.
|
|
libc.h was intended to be a header for access to global libc state and
related interfaces, but ended up included all over the place because
it was the way to get the weak_alias macro. most of the inclusions
removed here are places where weak_alias was needed. a few were
recently introduced for hidden. some go all the way back to when
libc.h defined CANCELPT_BEGIN and _END, and all (wrongly implemented)
cancellation points had to include it.
remaining spurious users are mostly callers of the LOCK/UNLOCK macros
and files that use the LFS64 macro to define the awful *64 aliases.
in a few places, new inclusion of libc.h is added because several
internal headers no longer implicitly include libc.h.
declarations for __lockfile and __unlockfile are moved from libc.h to
stdio_impl.h so that the latter does not need libc.h. putting them in
libc.h made no sense at all, since the macros in stdio_impl.h are
needed to use them correctly anyway.
|
|
the direct syscall or various thin and mostly-inline wrappers around
it are used instead internally. at some point a public futex function
should be added, but it's not yet clear what the signature should be,
and in the mean time this file is not useful.
|
|
|
|
|
|
|
|
these were overlooked for various reasons in earlier stages.
|
|
|
|
these were overlooked in the declarations overhaul work because they
are not properly declared, and the current framework even allows their
declared types to vary by arch. at some point this should be cleaned
up, but I'm not sure what the right way would be.
|
|
|
