| Age | Commit message (Collapse) | Author | Lines |
|---|
|
general policy is that all source files defining a public API or an
ABI mechanism referenced by a public header should include the public
header that declares the interface, so that the compiler or analysis
tools can check the consistency of the declarations. Alexander Monakov
pointed out a number of violations of this principle a few years back.
fix them now.
|
|
the ':' in optstring has special meaning as a flag applying to the
previous option character, or to getopt's error handling behavior when
it appears at the beginning. don't also accept a "-:" option based on
its presence.
|
|
based loosely on patch by Hauke Mehrtens; converted to wrap the public
API of the underlying getrandom function rather than direct syscalls,
so that if/when a fallback implementation of getrandom is added it
will automatically get picked up by getentropy too.
|
|
Do not retry waitpid if the child was terminated by a signal. Do not
examine status: since we are not passing any flags, we will not receive
stop or continue notifications.
|
|
Consider the first equals sign found in the option to be the delimiter
between it and its argument, even if it matches an equals sign in the
option name. This avoids consuming the equals sign, which would prevent
finding the argument. Instead, it forces a partial match of the part of
the option name before the equals sign.
Maintainer's note: GNU getopt_long does not explicitly document this
behavior, but it can be seen as a consequence of how partial matches
are specified, and at least GNU (bfd) ld is known to make use of it.
|
|
If we find a partial option name match, we need to keep looking for
ambiguous/conflicting options. However, we need to remember the position
in the candidate argument to find its option-argument later, if there is
one. This fixes e.g. option "foobar" being given as "--fooba=baz".
|
|
In all cases this is just a change from two volatile int to one.
|
|
the rightmost '/' character is not necessarily the delimiter before
the basename; it could be a spurious trailing character on the
directory name.
this change does not introduce any normalization of pathnames or
stripping of trailing slashes, contrary to at least glibc and perhaps
other implementations; it jusst prevents their presence from breaking
things. whether further changes should be made is an open question
that may depend on conformance and/or application compatibility
considerations.
based loosely on patch by Joakim Sindholt.
|
|
getopt is only specified to modify optopt on error, and some software
apparently infers an error from optopt!=0.
getopt_long is changed analogously. the resulting behavior differs
slightly from the behavior of the GNU implementation of getopt_long,
which keeps an internal shadow copy of optopt and copies it to the
public one on return, but since the GNU implementation also exhibits
this shadow-copy behavior for plain getopt where is is non-conforming,
I think this can reasonably be considered a bug rather than an
intentional behavior that merits mimicing.
|
|
|
|
overlayfs may have fairly long lines so we use getline to allocate a
buffer dynamically. The buffer will be allocated on first use, expand as
needed, but will never be free'ed.
Downstream bug: http://bugs.alpinelinux.org/issues/5703
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
|
|
the difference of pointers is a signed type ptrdiff_t; if it is only
32-bit, left-shifting it by 30 bits produces undefined behavior. cast
the difference to an appropriate unsigned type, uint32_t, before
shifting to avoid this.
the a64l function is specified to return a signed 32-bit result in
type long. as noted in the bug report by Ed Schouten, converting
implicitly from uint32_t only produces the desired result when long is
a 32-bit type. since the computation has to be done in unsigned
arithmetic to avoid overflow, simply cast the result to int32_t.
further, POSIX leaves the behavior on invalid input unspecified but
not undefined, so we should not take the difference between the
potentially-null result of strchr and the base pointer without first
checking the result. the simplest behavior is just returning the
partial conversion already performed in this case, so do that.
|
|
like fputs (see commit 10a17dfbad2c267d885817abc9c7589fc7ff630b), the
message printing code for getopt assumed that fwrite only returns 0 on
failure, but it can also happen on success if the total length to be
written is zero. programs with zero-length argv[0] were affected.
commit 500c6886c654fd45e4926990fee2c61d816be197 introduced this
problem in getopt by fixing the fwrite behavior to conform to the
requirements of ISO C. previously the wrong expectations of the getopt
code were met by the fwrite implementation.
|
|
getsubopt incorrectly returns the delimiting = in the value string,
this patch fixes it by increasing the pointer position by one.
Signed-off-by: Steven Barth <cyrus@openwrt.org>
|
|
when traditional syslogd implementations are restarted, the old server
socket ceases to exist and a new unix socket with the same pathname is
created. when this happens, the default destination address associated
with the client socket via connect is no longer valid, and attempts to
send produce errors. this happens despite the socket being datagram
type, and is in contrast to the behavior that would be seen with an IP
datagram (UDP) socket.
in order to avoid a situation where the application is unable to send
further syslog messages without calling closelog, this patch makes
syslog attempt to reconnect the socket when send returns an error
indicating a lost connection.
additionally, initial failure to connect the socket no longer results
in the socket being closed. this ensures that an application which
calls openlog to reserve the socket file descriptor will not run into
a situation where transient connection failure (e.g. due to syslogd
restart) prevents fd reservation. however, applications which may be
unable to connect the socket later (e.g. due to chroot, restricted
permissions, seccomp, etc.) will still fail to log if the syslog
socket cannot be connected at openlog time or if it has to be
reconnected later.
|
|
This completes the alternate backend support that was previously added
to the getpw* and getgr* functions. Unlike those, though, it
unconditionally queries nscd. Any groups from nscd that aren't in the
/etc/groups file are added to the returned list, and any that are
present in the file are ignored. The purpose of this behavior is to
provide a view of the group database consistent with what is observed
by the getgr* functions. If group memberships reported by nscd were
honored when the corresponding group already has a definition in the
/etc/groups file, the user's getgrouplist-based membership in the
group would conflict with their non-membership in the reported
gr_mem[] for the group.
The changes made also make getgrouplist thread-safe and eliminate its
clobbering of the global getgrent state.
|
|
|
|
the memory model we use internally for atomics permits plain loads of
values which may be subject to concurrent modification without
requiring that a special load function be used. since a compiler is
free to make transformations that alter the number of loads or the way
in which loads are performed, the compiler is theoretically free to
break this usage. the most obvious concern is with atomic cas
constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be
transformed to a_cas(p,*p,f(*p)); where the latter is intended to show
multiple loads of *p whose resulting values might fail to be equal;
this would break the atomicity of the whole operation. but even more
fundamental breakage is possible.
with the changes being made now, objects that may be modified by
atomics are modeled as volatile, and the atomic operations performed
on them by other threads are modeled as asynchronous stores by
hardware which happens to be acting on the request of another thread.
such modeling of course does not itself address memory synchronization
between cores/cpus, but that aspect was already handled. this all
seems less than ideal, but it's the best we can do without mandating a
C11 compiler and using the C11 model for atomics.
in the case of pthread_once_t, the ABI type of the underlying object
is not volatile-qualified. so we are assuming that accessing the
object through a volatile-qualified lvalue via casts yields volatile
access semantics. the language of the C standard is somewhat unclear
on this matter, but this is an assumption the linux kernel also makes,
and seems to be the correct interpretation of the standard.
|
|
the character sequence '$((' was incorrectly interpreted as the
opening of arithmetic even within single-quoted contexts, thereby
suppressing the checks for bad characters after the closing quote.
presently bad character checking is only performed when the WRDE_NOCMD
is used; this patch only corrects checking in that case.
|
|
as a result of commit e8e4e56a8ce1f3d7e4a027ff5478f2f8ea70c46b,
the later code path for setting optarg to a null pointer is no longer
necessary, and removing it eliminates an indention level and arguably
makes the code more readable.
|
|
the standard getopt does not touch optarg unless processing an option
with an argument. however, programs using the GNU getopt API, which we
attempt to provide in getopt_long, expect optarg to be a null pointer
after processing an option without an argument.
before argument permutation support was added, such programs typically
detected its absence and used their own replacement getopt_long,
masking the discrepency in behavior.
|
|
in the current version of __synccall, the callback is always run, so
failure to handle this case did not matter. however, the upcoming
overhaul of __synccall will have failure cases, in which case the
callback does not run and errno is already set. the changes being
committed now are in preparation for that.
|
|
this addresses alpine linux issue #3692 and brings the syslog message
length limit in alignment with uclibc's implementation.
|
|
commit b72cd07f176b876aa51864d93aa8101477b1d732 added support for a
this feature in getopt, but it was later broken in the case where
getopt_long is used as a side effect of the changes made in commit
91184c4f16b143107fa9935edebe5d2b20bd70d8, which prevented the
underlying getopt call from seeing the leading '-' or '+' character in
optstring.
this commit changes the logic in the getopt_long core to check for a
leading colon, possibly after the leading '-' or '+', without
depending on the latter having been skipped by the caller. a minor
incorrectness in the return value for one error condition in
getopt_long is also fixed when opterr has been set to zero but
optstring has no leading ':'.
|
|
based on patch by Dima Krasner, with minor improvements for code size.
connect can fail if there is no listening syslogd, in which case a
useless socket was kept open, preventing subsequent syslog call from
attempting to connect again.
|
|
based on discussion with and patches by Felix Janda. these changes
started as an effort to factor forkpty in terms of login_tty, which
returns an error and skips fd reassignment and closing if setting the
controlling terminal failed. the previous forkpty code was unable to
handle errors in the child, and did not attempt to; it just silently
ignored them. but this would have been unacceptable when switching to
using login_tty, since the child would start with the wrong stdin,
stdout, and stderr and thereby clobber the parent's files.
the new code uses the same technique as the posix_spawn implementation
to convey any possible error in the child to the parent so that the
parent can report failure to the caller. it is also safe against
thread cancellation and against signal delivery in the child prior to
the determination of success.
|
|
being a nonstandard function, this isn't strictly necessary, but it's
inexpensive and avoids unpleasant surprises. eventually I would like
all functions in libc to be safe against cancellation, either ignoring
it or acting on it cleanly.
|
|
not only is this semantically more correct; it also reduces code size
slightly by eliminating the need for the compiler to assume the
possibility of aliasing.
|
|
|
|
this is undocumented but possibly expected behavior of GNU
getopt_long, and useful when error message printing has been
suppressed.
|
|
some related changes are also made to getopt, and the return value of
getopt_long in the case of missing arguments is fixed.
|
|
|
|
if writing the error message fails, POSIX requires that ferror(stderr)
be set. and as a function that operates on a stdio stream, getopt is
required to lock the stream it uses, stderr.
fwrite calls are used instead of fprintf since there is a demand from
some users not to pull in heavy stdio machinery via getopt. this
mimics the original code using write.
|
|
|
|
if argv permutation is used, the option terminator "--" should be
moved before any skipped non-option arguments rather than being left
in the argv tail where the caller will see and interpret it.
|
|
this is an undocumented feature of GNU getopt_long that the BSD
version also mimics, and is reportedly needed by some programs.
|
|
in the case where an initial '+' was passed in optstring (a
getopt_long feature to suppress argv permutation), getopt would fail
to see a possible subsequent ':', resulting in incorrect handling of
missing arguments.
|
|
|
|
|
|
the previous hard-coded offsets of +1 and +2 contained a hidden
assumption that the option character matched was single-byte, despite
this implementation of getopt attempting to support multibyte option
characters. this patch reworks the matching logic to leave the final
index pointing just past the matched character so that fixed offsets
can be used to check for ':'.
|
|
this is a GNU extension, activated by including '-' as the first
character of the options string, whereby non-option arguments are
processed as if they were arguments to an option character '\1' rather
than ending option processing.
|
|
Processing an option character with optional argument fails if the
option is last on the command line. This happens because the
if (optind >= argc) check runs first before testing for optional
argument.
|
|
The function originates from SunOS 4.x in which the null argument
is allowed. glibc also handles this case.
|
|
per the resolution of Austin Group issue #617, these are accepted for
XSI option in POSIX future and thus I'm treating them as standard
functions.
|
|
this function provides a way for third-party library code to use the
same logic that's used internally in libc for suppressing untrusted
input/state (e.g. the environment) when the application is running
with privleges elevated by the setuid or setgid bit or some other
mechanism. its semantics are intended to match the openbsd function by
the same name.
there was some question as to whether this function is necessary:
getauxval(AT_SECURE) was proposed as an alternative. however, this has
several drawbacks. the most obvious is that it asks programmers to be
aware of an implementation detail of ELF-based systems (the aux
vector) rather than simply the semantic predicate to be checked. and
trying to write a safe, reliable version of issetugid in terms of
getauxval is difficult. for example, early versions of the glibc
getauxval did not report ENOENT, which could lead to false negatives
if AT_SECURE was not present in the aux vector (this could probably
only happen when running on non-linux kernels under linux emulation,
since glibc does not support linux versions old enough to lack
AT_SECURE). as for musl, getauxval has always properly reported
errors, but prior to commit 7bece9c2095ee81f14b1088f6b0ba2f37fecb283,
the musl implementation did not emulate AT_SECURE if missing, which
would result in a false positive. since musl actually does partially
support kernels that lack AT_SECURE, this was problematic.
the intent is that library authors will use issetugid if its
availability is detected at build time, and only fall back to the
unreliable alternatives on systems that lack it.
patch by Brent Cook. commit message/rationale by Rich Felker.
|
|
this could happen on 2.4-series linux kernels that predate AT_SECURE
and possibly on other kernels that are emulating the linux syscall API
but not providing AT_SECURE in the aux vector at startup.
in principle applications should be checking errno anyway, but this
does not really work. to be secure, the caller would have to treat
ENOENT (indeterminate result) as possibly-suid and thereby disable
functionality in the typical non-suid usage case. and since glibc only
runs on kernels that provide AT_SECURE, applications written to the
glibc getauxval API might simply assume it succeeds.
|
|
this was previously a no-op, somewhat intentionally, because I failed
to understand that it only has an effect when sending to the logging
facility fails and thus is not the nuisance that it would be if always
sent output to the console.
|
|
this behavior is no longer valid in general, and was never necessary.
if the LOG_PERROR option is set, output to stderr could still succeed.
also, when the LOG_CONS option is added, it will need syslog to
proceed even if opening the log socket fails.
|
|
this is a nonstandard feature, but easy and inexpensive to add. since
the corresponding macro has always been defined in our syslog.h, it
makes sense to actually support it. applications may reasonably be
using the presence of the macro to assume that the feature is
supported.
the behavior of omitting the 'header' part of the log message does not
seem to be well-documented, but matches other implementations (at
least glibc) which have this option.
based on a patch by Clément Vasseur, but simplified using %n.
|
|
errno must be saved upon vsyslog entry, otherwise its value could be
changed by some libc function before reaching the %m handler in
vsnprintf.
|
