summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)AuthorLines
2016-01-30ldso: fix GDB dynamic linker info on MIPSFelix Fietkau-0/+4
GDB is looking for a pointer to the ldso debug info in the data of the ..rld_map section. Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2016-01-30regex: simplify the {,} repetition parsing logicSzabolcs Nagy-20/+19
2016-01-30regex: treat \+, \? as repetitions in BRESzabolcs Nagy-1/+5
These are undefined escape sequences by the standard, but often used in sed scripts.
2016-01-30regex: rewrite the repetition parsing codeSzabolcs Nagy-30/+29
The goto logic was hard to follow and modify. This is in preparation for the BRE \+ and \? support.
2016-01-30regex: treat \| in BRE as alternationSzabolcs Nagy-2/+17
The standard does not define semantics for \| in BRE, but some code depends on it meaning alternation. Empty alternative expression is allowed to be consistent with ERE. Based on a patch by Rob Landley.
2016-01-30regex: reject repetitions in some cases with REG_BADRPTSzabolcs Nagy-3/+12
Previously repetitions were accepted after empty expressions like in (*|?)|{2}, but in BRE the handling of * and \{\} were not consistent: they were accepted as literals in some cases and repetitions in others. It is better to treat repetitions after an empty expression as an error (this is allowed by the standard, and glibc mostly does the same). This is hard to do consistently with the current logic so the new rule is: Reject repetitions after empty expressions, except after assertions ^*, $? and empty groups ()+ and never treat them as literals. Empty alternation (|a) is undefined by the standard, but it can be useful so that should be accepted.
2016-01-30regex: clean up position accounting for literal nodesSzabolcs Nagy-4/+2
This should not change the meaning of the code, just make the intent clearer: advancing position is tied to adding a new literal.
2016-01-30fix misaligned pointer-like objects in arm atomics asm source fileRich Felker-0/+2
this file's .data section was not aligned, and just happened to get the correct alignment with past builds. it's likely that the move of atomic.s from arch/arm/src to src/thread/arm caused the change in alignment, which broke the atomic and thread-pointer access fragments on actual armv5 hardware.
2016-01-28reuse parsed resolv.conf in dns core to avoid re-reading/re-parsingRich Felker-16/+22
2016-01-28fix uninitialized variable in new resolv.conf parserRich Felker-1/+1
2016-01-28add support for search domains to dns resolverRich Felker-1/+41
search is only performed if the search or domain keyword is used in resolv.conf and the queried name has fewer than ndots dots. there is no default domain and names with >=ndots dots are never subjected to search; failure in the root scope is final. the (non-POSIX) res_search API presently does not honor search. this may be added at some point in the future if needed. resolv.conf is now parsed twice, at two different layers of the code involved. this will be fixed in a subsequent patch.
2016-01-28fix handling of dns response codesRich Felker-1/+2
rcode of 3 (NxDomain) was treated as a hard EAI_NONAME failure, but it should instead return 0 (no results) so the caller can continue searching. this will be important for adding search domain support. the top-level caller will automatically return EAI_NONAME if there are zero results at the end. also, the case where rcode is 0 (success) but there are no results was not handled. this happens when the domain exists but there are no A or AAAA records for it. in this case a hard EAI_NONAME should be imposed to inhibit further search, since the name was defined and just does not have any address associated with it. previously a misleading hard failure of EAI_FAIL was reported.
2016-01-28fix logic for matching search/domain keywords in resolv.confRich Felker-1/+1
2016-01-28factor resolv.conf parsing out of res_msend to its own fileRich Felker-60/+126
this change is made in preparation for adding search domains, for which higher-level code will need to parse resolv.conf. simply parsing it twice for each lookup would be one reasonable option, but the existing parser code was buggy anyway, which suggested to me that it's a bad idea to have two variants of this code in two different places. the old code in res_msend potentially misinterpreted overly long lines in resolv.conf, and stopped parsing after it found 3 nameservers, even if there were relevant options left to be parsed later in the file.
2016-01-28add errno setting to stub utmpxname functionRich Felker-0/+2
2016-01-28legacy/utmpx: Add utmp{,x}name stubsKylie McClain-0/+7
2016-01-27improve clock_gettime and adapt it to support slightly-broken vdsoRich Felker-22/+39
these changes are motivated by a functionally similar patch by Hauke Mehrtens to address the needs of the new mips vdso clock_gettime, which wrongly fails with ENOSYS rather than falling back to making a syscall for clock ids it cannot handle from userspace. in the process of preparing to handle that case, it was noticed that the old clock_gettime use of the vdso was actually wrong with respect to error handling -- the tail call to the vdso function failed to set errno and instead returned an error code. since tail calls to vdso are no longer possible and since the plain syscall code is now needed as a fallback path anyway, it does not make sense to use a function pointer to call the plain syscall code path. instead, it's inlined at the end of the main clock_gettime function. the new code also avoids the need to test for initialization of the vdso function pointer by statically initializing it to a self-init function, and eliminates redundant loads from the volatile pointer object. finally, the use of a_cas_p on an object of type other than void *, which is not permitted aliasing, is replaced by using an object with the correct type and casting the value.
2016-01-26change the internal socketcall selection logicSzabolcs Nagy-1/+1
only use SYS_socketcall if SYSCALL_USE_SOCKETCALL is defined internally, otherwise use direct syscalls. this commit does not change the current behaviour, it is preparation for adding direct syscall numbers for i386.
2016-01-25move dynamic linker to its own top-level directory, ldsoRich Felker-2087/+0
this eliminates the last need for the SHARED macro to control how files in the src tree are compiled. the same code is used for both libc.a and libc.so, with additional code for the dynamic linker (from the new ldso tree) being added to libc.so but not libc.a. separate .o and .lo object files still exist for the src tree, but the only difference is that the .lo files are built as PIC. in the future, if/when we add dlopen support for static-linked programs, much of the code in dynlink.c may be moved back into the src tree, but properly factored into separate source files. in that case, the code in the ldso tree will be reduced to just the dynamic linker entry point, self-relocation, and loading of libraries needed by the main application.
2016-01-25adapt static dl_iterate_phdr not to depend on !defined(SHARED)Rich Felker-4/+3
like elsewhere, use a weak alias that the dynamic linker will override with a more complete version capable of handling shared libraries.
2016-01-25move static-linked stub dlsym out of dynlink.cRich Felker-11/+15
the function name is still __-prefixed because it requires an asm wrapper to pass the caller's address in order for RTLD_NEXT to work. since this was the last function in dynlink.c still used for static linking, now the whole file is conditional on SHARED being defined.
2016-01-25move static-linked stub dlopen out of dynlink.cRich Felker-5/+13
2016-01-25move dlinfo out of dynlink.cRich Felker-16/+12
2016-01-25move dlclose out of dynlink.c to its own source fileRich Felker-5/+9
2016-01-25move static-linked stub invalid dso handle checking out of dynlink.cRich Felker-9/+20
2016-01-25move static/stub version of dladdr out of dynlink.cRich Felker-9/+6
2016-01-25factor dlerror and error-setting code out of dynlink.cRich Felker-32/+55
the ultimate goal of this change is to get all code used in libc.a out of dynlink.c, so that the dynamic linker code can be moved to its own tree and object files in the src tree can all be shared between libc.a and libc.so.
2016-01-22add arch/abi info to dynamic linker's id/version outputRich Felker-1/+1
2016-01-22move sh port's __shcall internal function from arch/sh/src to src treeRich Felker-0/+5
2016-01-22move sh __unmapself code from arch/sh/src to main src treeRich Felker-0/+24
2016-01-22move x32 sysinfo impl and syscall fixup code out of arch/x32/srcRich Felker-1/+88
all such arch-specific translation units are being moved to appropriate arch dirs under the main src tree.
2016-01-22move arm-specific translation units out of arch/arm/src, to src/*/armRich Felker-1/+244
this is possible with the new build system that allows src/*/$(ARCH)/* files which do not shadow a file in the parent directory, and yields a more logical organization. eventually it will be possible to remove arch/*/src from the build system.
2016-01-21overhaul sh atomics for new atomics framework, add j-core cas.l backendRich Felker-0/+105
sh needs runtime-selected atomic backends since there are a number of supported models that use non-forwards-compatible (non-smp-compatible) atomic mechanisms. previously, the code paths for this were highly inefficient since they involved C function calls with multiple branches in the callee and heavy spills in the caller. the new code performs calls the runtime-selected asm fragment from inline asm with extremely minimal clobbers, rather than using a function call. for the sh4a case where the atomic mechanism is known and there is no forward-compatibility issue, the movli.l and movco.l instructions are provided as a_ll and a_sc, allowing the new shared atomic.h to generate efficient inline versions of all the basic atomic operations without needing a cas loop.
2016-01-21refactor internal atomic.hRich Felker-0/+275
rather than having each arch provide its own atomic.h, there is a new shared atomic.h in src/internal which pulls arch-specific definitions from arc/$(ARCH)/atomic_arch.h. the latter can be extremely minimal, defining only a_cas or new ll/sc type primitives which the shared atomic.h will use to construct everything else. this commit avoids making heavy changes to the individual archs' atomic implementations. definitions which are identical or near-identical to what the new shared atomic.h would produce have been removed, but otherwise the changes made are just hooking up the arch-specific files to the new infrastructure. major changes to take advantage of the new system will come in subsequent commits.
2016-01-20exclude vis.h when compiling assembly filesKhem Raj-1/+1
otherwise C declarations are included into preprocessed (.S) asm source files, producing errors from the assembler.
2016-01-20switch arm, sh, and mips fenv asm from .sub system to .S filesRich Felker-6/+21
2016-01-20switch sh and mips setjmp asm from .sub system to .S filesRich Felker-109/+12
2016-01-20replace armhf math asm source files with inline asmRich Felker-40/+60
this makes it possible to inline them with LTO, and is the simplest approach to eliminating the use of .sub files. this also makes VFP sqrt available for use with the standard EABI (plain arm rather than armhf subarch) when libc is built with -mfloat-abi=softfp. the same could have been done for fabs, but when the argument and return value are in integer registers, moving to VFP registers and back is almost certainly more costly than a simple integer operation.
2016-01-20adapt build of arm memcpy asm not to use .sub filesRich Felker-2/+7
this depends on commit 9f5eb77992b42d484d69e879d24ef86466f20f21, which made it possible to use a .c file for arch-specific replacements, and on commit 2f853dd6b9a95d5b13ee8f9df762125e0588df5d, the out-of-tree build support, which made it so that src/*/$(ARCH)/* 'replacement' files get used even if they don't match the base name of a .c file in the parent directory.
2016-01-17fix if_nametoindex return value when socket open failsRon Yorston-1/+1
The return value of if_nametoindex is unsigned; it should return 0 on error.
2016-01-06add missing protocols to protoent lookup functionsTimo Teräs-1/+16
2015-12-20fix overly pessimistic realloc strategy in getdelimRich Felker-1/+1
previously, getdelim was allocating twice the space needed every time it expanded its buffer to implement exponential buffer growth (in order to avoid quadratic run time). however, this doubling was performed even when the final buffer length needed was already known, which is the common case that occurs whenever the delimiter is in the FILE's buffer. this patch makes two changes to remedy the situation: 1. over-allocation is no longer performed if the delimiter has already been found when realloc is needed. 2. growth factor is reduced from 2x to 1.5x to reduce the relative excess allocation in cases where the delimiter is not initially in the buffer, including unbuffered streams. in theory these changes could lead to quadratic time if the same buffer is reused to process a sequence of lines successively increasing in length, but once this length exceeds the stdio buffer size, the delimiter will not be found in the buffer right away and exponential growth will still kick in.
2015-12-19avoid updating caller's size when getdelim fails to reallocRich Felker-5/+6
getdelim was updating *n, the caller's stored buffer size, before calling realloc. if getdelim then failed due to realloc failure, the caller would see in *n a value larger than the actual size of the allocated block, and use of that value is unsafe. in particular, passing it again to getdelim is unsafe. now, temporary storage is used for the desired new size, and *n is not written until realloc succeeds.
2015-12-15fix crash when signal number 0 is passed to sigactionRich Felker-5/+1
this error case was overlooked in the old range checking logic. new check is moved out of __libc_sigaction to the public wrapper in order to unify the error path and reduce code size.
2015-12-08fix tsearch, tfind, tdelete to handle null pointer inputSzabolcs Nagy-0/+6
POSIX specifies the behaviour for null rootp input, but it was not implemented correctly.
2015-12-08tsearch code cleanupSzabolcs Nagy-24/+28
changed the insertion method to simplify the recursion logic and reduce code size a bit.
2015-12-08fix tsearch to avoid crash on oomSzabolcs Nagy-1/+1
malloc failure was not properly propagated in the insertion method which led to null pointer dereference.
2015-12-08fix tdelete to properly balance the treeSzabolcs Nagy-5/+14
the tsearch data structure is an avl tree, but it did not implement the deletion operation correctly so the tree could become unbalanced. reported by Ed Schouten.
2015-11-30properly handle point-to-point interfaces in getifaddrs()Jo-Philipp Wich-3/+16
With point-to-point interfaces, the IFA_ADDRESS netlink attribute contains the peer address while an extra attribute IFA_LOCAL carries the actual local interface address. Both the glibc and uclibc implementations of getifaddrs() handle this case by moving the ifa_addr contents to the broadcast/remote address union and overwriting ifa_addr upon receipt of an IFA_LOCAL attribute. This patch adds the same special treatment logic of IFA_LOCAL to musl's implementation of getifaddrs() in order to align its behaviour with that of uclibc and glibc. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-28ldso: fix the dtv update logic in __tls_get_newSzabolcs Nagy-1/+1
if two or more threads accessed tls in a dso that was loaded after the threads were created, then __tls_get_new could do out-of-bound memory access (leading to segfault). accidentally byte count was used instead of element count when the new dtv pointer was computed. (dso->new_dtv is (void**).) it is rare that the same dso provides dtv for several threads, the crash was not observed in practice, but possible to trigger.