| Age | Commit message (Collapse) | Author | Lines |
|---|
|
the outer-loop approach made sense when we were also processing
DT_JMPREL, which might be in REL or RELA form, to avoid major code
duplication. commit 09db855b35709aa627d7055c57a98e1e471920ab removed
processing of DT_JMPREL, and in the remaining two tables, the format
(REL or RELA) is known by the name of the table. simply writing two
versions of the loop results in smaller and simpler code.
|
|
the DT_JMPREL relocation table necessarily consists entirely of
JMP_SLOT (REL_PLT in internal nomenclature) relocations, which are
symbolic; they cannot be resolved in stage 1, so there is no point in
processing them.
|
|
the comment claimed that EUC/GBK/Big5 are not implemented, which has
been incorrect since commit 19b4a0a20efc6b9df98b6a43536ecdd628ba4643.
|
|
while not a requirement, it's common convention in other iconv
implementations to accept "CHAR" as an alias for nl_langinfo(CODESET),
meaning the encoding used for char[] strings in the current locale,
and also "" as an alternate form. supporting this is not costly and
improves compatibility.
|
|
this fixes a regression on powerpc that was introduced in commit
f3ddd173806fd5c60b3f034528ca24542aecc5b9. global data accesses on
powerpc seem to be using a translation-unit-local GOT filled via
R_PPC_ADDR32 relocations rather than R_PPC_GLOB_DAT. being a non-GOT
relocation type, these were not reprocessed after adding the main
application and its libraries to the chain, causing libc code not to
see copy relocations in the main program, and therefore to use the
pre-copy-relocation addresses for global data objects (like environ).
the motivation for the dynamic linker only reprocessing GOT/PLT
relocation types in stage 3 is that these types always have a zero
addend, making them safe to process again even if the storage for the
addend has been clobbered. other relocation types which can be used
for address constants in initialized data objects may have non-zero
addends which will be clobbered during the first pass of relocation
processing if they're stored inline (REL form) rather than out-of-line
(RELA form).
powerpc generally uses only RELA, so this patch is sufficient to fix
the regression in practice, but is not fully general, and would not
suffice if an alternate toolchain generated REL for powerpc.
|
|
if setlocale has not been called, the current locale's messages_name
may be a null pointer. the code path where it's assumed to be non-null
was only reachable if bindtextdomain had already been called, which is
normally not done in programs which do not call setlocale, so the
omitted check went unnoticed.
patch from Void Linux, with description rewritten.
|
|
the code being removed used atomics to track whether any threads might
be using a locale other than the current global locale, and whether
any threads might have abstract 8-bit (non-UTF-8) LC_CTYPE active, a
feature which was never committed (still pending). the motivations
were to support early execution prior to setup of the thread pointer,
to partially support systems (ancient kernels) where thread pointer
setup is not possible, and to avoid high performance cost on archs
where accessing the thread pointer may be very slow.
since commit 19a1fe670acb3ab9ead0fe31859ca7d4fe40dd54, the thread
pointer is always available, so these hacks are no longer needed.
removing them greatly simplifies the affected code.
|
|
commit f630df09b1fd954eda16e2f779da0b5ecc9d80d3 added logic to handle
the case where __set_thread_area is called more than once by reusing
the GDT slot already in the %gs register, and only setting up a new
GDT slot when %gs is zero. this created a hidden assumption that %gs
is zero when a new process image starts, which is true in practice on
Linux, but does not seem to be documented ABI, and fails to hold under
qemu app-level emulation.
while it would in theory be possible to zero %gs in the entry point
code, this code is shared between static and dynamic binaries, and
dynamic binaries must not clobber the value of %gs already setup by
the dynamic linker.
the alternative solution implemented in this commit simply uses global
data to store the GDT index that's selected. __set_thread_area should
only be called in the initial thread anyway (subsequent threads get
their thread pointer setup by __clone), but even if it were called by
another thread, it would simply read and write back the same GDT index
that was already assigned to the initial thread, and thus (in the x86
memory model) there is no data race.
|
|
a null pointer is valid here and indicates that the current time
should be used. based on patch by Felix Janda, simplified.
|
|
i386, x86_64, x32, and powerpc all use TLS for stack protector canary
values in the default stack protector ABI, but the location only
matched the ABI on i386 and x86_64. on x32, the expected location for
the canary contained the tid, thus producing spurious mismatches
(resulting in process termination) upon fork. on powerpc, the expected
location contained the stdio_locks list head, so returning from a
function after calling flockfile produced spurious mismatches. in both
cases, the random canary was not present, and a predictable value was
used instead, making the stack protector hardening much less effective
than it should be.
in the current fix, the thread structure has been expanded to have
canary fields at all three possible locations, and archs that use a
non-default location must define a macro in pthread_arch.h to choose
which location is used. for most archs (which lack TLS canary ABI) the
choice does not matter.
|
|
the 64-bit push reads not only the 32-bit return address but also the
first 32 signal mask bits. if any were nonzero, the return address
obtained will be invalid.
at some point storage of the return address should probably be moved
to follow the saved mask so that there's plenty room and the same code
can be used on x32 and regular x86_64, but for now I want a fix that
does not risk breaking x86_64, and this simple re-zeroing works.
|
|
the kernel does not properly clear the upper bits of the syscall
argument, so we have to do it before the syscall.
|
|
These cases were incorrect in C11 as described by
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1886.htm
|
|
due to an incorrect return statement in this error case, the
previously blocked cancellation state was not restored and no result
was stored. this could lead to invalid (read) accesses in the caller
resulting in crashes or nonsensical result data in the event of memory
exhaustion.
|
|
while the sh port is still experimental and subject to ABI
instability, this is not actually an application/libc boundary ABI
change. it only affects third-party APIs where jmp_buf is used in a
shared structure at the ABI boundary, because nothing anywhere near
the end of the jmp_buf object (which includes the oversized sigset_t)
is accessed by libc.
both glibc and uclibc have 15-slot jmp_buf for sh. presumably the
smaller version was used in musl because the slots for fpu status
register and thread pointer register (gbr) were incorrect and must not
be restored by longjmp, but the size should have been preserved, as
it's generally treated as a libc-agnostic ABI property for the arch,
and having extra slots free in case we ever need them for something is
useful anyway.
|
|
at least some assembler versions do not accept the register name lr.
use the name x30 instead.
|
|
commit 646cb9a4a04e5ed78e2dd928bf9dc6e79202f609 switched sigsetjmp to
use the new hidden ___setjmp symbol for setjmp, but the nofpu variant
of setjmp.s was not updated to match.
|
|
both static and dynamic linked versions of the __copy_tls function
have a hidden assumption that the alignment of the beginning or end of
the memory passed is suitable for storing an array of pointers for the
dtv. pthread_create satisfies this requirement except when
libc.tls_size is misaligned, which cannot happen with dynamic linking
due to way update_tls_size computes the total size, but could happen
with static linking and odd-sized TLS.
|
|
commit dab441aea240f3b7c18a26d2ef51979ea36c301c, which made thread
pointer init mandatory for all programs, rendered this store obsolete
by removing the early-return path for static programs with no TLS.
|
|
this slightly reduces the code size cost of TLS/thread-pointer for
static linking since __init_tp can be inlined into its only caller and
removed. this is analogous to the handling of __init_libc in
__libc_start_main, where the function only has external linkage when
it needs to be called from the dynamic linker.
|
|
the implicit-operand form of fucomip is rejected by binutils 2.19 and
perhaps other versions still in use. writing both operands explicitly
fixes the issue. there is no change to the resulting output.
commit a732e80d33b4fd6f510f7cec4f5573ef5d89bc4e was the source of this
regression.
|
|
use CAS instead of swap since it's lighter for most archs, and keep
EBUSY in the lock value so that the old value obtained by CAS can be
used directly as the return value for pthread_spin_trylock.
|
|
|
|
the motivation for this change is that the extra declaration (with or
without visibility) using "struct _IO_FILE" instead of "FILE" seems to
trigger a bug in gcc 3.x where it considers the types mismatched.
however, this change also results in slightly better code and it is
valid because (1) these three objects are constant, and (2) applying
the & operator to any of them is invalid C, since they are not even
specified to be objects. thus it does not matter if the application
and libc see different addresses for them, as long as the (initial,
unchanging) value is seen the same by both.
|
|
these are used as hidden by asm files (and such use is the whole
reason they exist), but their actual definitions were not hidden.
|
|
commit f9cccfc16e58b39ee381fbdfb8688db3bb8e3555 left behind the part
in libc.c; remove it too.
|
|
part of the goal here is to eliminate use of the ATTR_LIBC_VISIBILITY
macro outside of libc.h, since it was never intended to be 'public'.
|
|
|
|
these were hacks to work around toolchains that could not properly
optimize PIC accesses based on visibility and would generate GOT
lookups even for hidden data, which broke the old dynamic linker.
since commit f3ddd173806fd5c60b3f034528ca24542aecc5b9 it no longer
matters; the dynamic linker does not assume accessibility of this data
until stage 3.
|
|
when the non-stub duplocale code was added as part of the locale
framework in commit 0bc03091bb674ebb9fa6fe69e4aec1da3ac484f2, the old
code to memcpy the old locale object to the new one was left behind.
the conditional for the memcpy no longer makes sense, because the
conditions are now always-true when it's reached, and the memcpy is
wrong because it clobbers the new->messages_name pointer setup just
above.
since the messages_name and ctype_utf8 members have already been
copied, all that remains is the cat[] array. these pointers are
volatile, so using memcpy to copy them is formally wrong; use a for
loop instead.
|
|
the first switch already returns in the F_SETLKW code path so it need
not be handled in the second switch. moreover the code in the second
switch is wrong for the F_SETLKW command: it's not cancellable.
|
|
the leak was found by static analysis (reported by Alexander Monakov),
not tested/observed, but seems to have occured both when failing due
to O_EXCL, and in a race condition with O_CREAT but not O_EXCL where a
semaphore by the same name was created concurrently.
|
|
the allocating path which can fail is for dynamic TLS, which can only
occur at runtime, and the check for runtime was already made in the
outer conditional.
|
|
commit 637dd2d383cc1f63bf02a732f03786857b22c7bd introduced the checks
for RTLD_DEFAULT and RTLD_NEXT here, claiming they fixed a regression,
but the above conditional block clearly already covered these cases,
and removing the checks produces no difference in the generated code.
|
|
this is implemented via the build system and does not affect source
files. the idea is to use protected or hidden visibility to prevent
the compiler from pessimizing function calls within a shared (or
position-independent static) libc in the form of overhead setting up
for a call through the PLT. the ld-time symbol binding via the
-Bsymbolic-functions option already optimized out the PLT itself, but
not the code in the caller needed to support a call through the PLT.
on some archs this overhead can be substantial; on others it's
trivial.
|
|
analogous to commit 646cb9a4a04e5ed78e2dd928bf9dc6e79202f609 for sh.
|
|
these are perfectly fine with ld-time symbol binding, but otherwise
result in textrels. they cannot be replaced with @PLT jump targets
because the PLT thunks require a GOT register to be setup, so use a
hidden alias instead.
|
|
analogous to commit 646cb9a4a04e5ed78e2dd928bf9dc6e79202f609 for sh.
|
|
these are perfectly fine with ld-time symbol binding, but if the calls
go through a PLT thunk, they are invalid because the caller does not
setup a GOT register. use a hidden alias to bypass the issue.
|
|
analogous to commit 8ed66ecbcba1dd0f899f22b534aac92a282f42d5 for i386.
|
|
none of these are actual textrels because of ld-time binding performed
by -Bsymbolic-functions, but I'm changing them with the goal of making
ld-time binding purely an optimization rather than relying on it for
semantic purposes.
in the case of memmove's call to memcpy, making it explicit that the
memmove asm is assuming the forward-copying behavior of the memcpy asm
is desirable anyway; in case memcpy is ever changed, the semantic
mismatch would be apparent while editing memmcpy.s.
|
|
this fixes truncation of error messages containing long pathnames or
symbol names.
the dlerror state was previously required by POSIX to be global. the
resolution of bug 97 relaxed the requirements to allow thread-safe
implementations of dlerror with thread-local state and message buffer.
|
|
|
|
this reverts the commit f29fea00b5bc72d4b8abccba2bb1e312684d1fce
which was based on a bug in C99 and POSIX and did not match IEEE-754
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1515.pdf
|
|
these functions are never called directly; only their addresses are
used, so PLT indirections should never happen unless a broken
application tries to redefine them, but it's still best to make them
hidden.
|
|
|
|
this change is made in preparation to support linking without
-Bsymbolic-functions.
|
|
commit 5fc1487832e16aa2119e735a388d5f36c8c139e2 attempted to fix it,
but neglected the fact that mips has branch delay slots.
|
|
the braf instruction's destination register is an offset from the
address of the braf instruction plus 4 (or equivalently, the address
of the next instruction after the delay slot). the code for dlsym was
incorrectly computing the offset to pass using the address of the
delay slot itself. in other places, a label was placed after the delay
slot, but I find this confusing. putting the label on the branch
instruction itself, and manually adding 4, makes it more clear which
branch the offset in the constant pool goes with.
|
|
even hidden functions need @PLT symbol references; otherwise an
absolute address is produced instead of a PC-relative one.
|
